Error in installing itunes

when i install
itunes, display a warning like
this "there is a problem with
this Windows installation package.
DLLs needed for this installation
is completed the installation can not be run
contact your support provider or
seller of your package"
what's the solution??

Let's try the fixit from the following Microsoft document with that one:
Fix problems with programs that can't be installed or uninstalled

Similar Messages

Error on installing iTunes under Win 8

Error on installing iTunes under Win 8
I have recently upgraded to Win 8. When installing iTunes the following error shows:
"An error occurred during the installation of assembly 'Microsoft.VC80.CRT.type="win32",version"8.0.50727.4053.publicKeyToken="1fc8b3b 9a1e18e3b",processorArchitecture="amd64". Please refer to Help and Support for more information HRESULT:0x80073715.
I am running the ITunes x64 install. I have installed the V++ redistributable with no change in result.
I have subsequently downloaded and manually installed via the Apple Software update program iTunes. However this does not allow my iPad to be connected as it is not the x64 version.

After spending an entire day on this issue, I figured out something that worked. After installing Windows 8 (64-bit) then Visual Studio 2012 (or 2013) then the latest 64-bit iTunes app, I got the 0x80073715 error.
What finally worked for me was:
1) Get all the Windows updates and hotfixes - especially the ones for Visual Studio.
2) Go to http://www.microsoft.com/en-us/download/details.aspx?id=14431 and download the "Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update"
3) Only install vcredist_x64.exe.
After running these steps, I was able to completely install iTunes on my Windows 8 64-bit instance.
Hope this helps.

Error while installing itunes

hi friends,
Im getting an error while installing itunes in my laptop.its using windows vista.i even tried in my friends laptop which is Win XP but i ended up with the same error
the error is as follows:
VB script is not installed or has been disabled.please enable VB script and try again.
please help me clear this problem.
sony laptop Windows Vista
sony laptop Windows Vista
sony laptop Windows Vista

SuziVB
regsrv32.exe - the program you are trying to run should normally be in:
c:\Windows\System32 (assuming a standard set up)
You could check to see if it is there. If it is you could try putting the path in front of the command so it would be as follows:
c:\Windows\System32\regsvr32 vbscript.dll
The problem may be caused by an incorrect environmental variable setting. If you want to try and fix it, the following link gives a description how to do it.
http://icrontic.com/forum/showthread.php?t=37876

TS3212 I get an apple application support error when installing itunes. It says uninstall and re-install. Does not work. same message. What is a solution?

I get an apple application support error when installing itunes. It says uninstall and re-install. Does not work. same message. What is a solution?

Is that an error 2 message?
If so, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Getting error 2349 installing itunes on vista 64-bit. Please help!

getting error 2349 installing itunes on vista 64-bit. Please help!

I've been having the same issue for the past few months. Try this http://support.apple.com/kb/HT1926
go through each step of the general installation troubleshooting completely then restart your computer and try to install it again. It worked for me on the first try so hopefully this helps!

Error when installing iTunes 7.0.2

i cant install iTunes 7.0.2 because quicktime cannot install
at the end of the quicktime installation it give me this error:
HKEYLOCALMACHINE\Software\Classes\QuickTimePlayerLib.QuickTimePlayerApp\CLSID
verify you have sufficient access to that key or contact your support personnnel
i am the Administrator
ive never had problems with iTunes before or quicktime
i am using a Windows XP if that helps!

... don't bother changing burning speed, it didn't work with me... just try different brand of media
ciao

Error when installing Itunes 7, need help!

Everytime i try installing the new itunes 7, i get this error, http://img84.imageshack.us/my.php?image=ituneshelpsl5.png

The Windows Installer service, the engine behind all MSI installers, performs installations with the built-in operating system account SYSTEM on behalf of the user. So it is SYSTEM's permissions on files, folders, and registry keys that ultimately matter. SYSTEM is normally the most powerful account, but if we run our computers as an administrator, it is possible to inadvertently curb SYSTEM's power by altering permissions with a program or directly ourselves. The result is failures at random points throughout the Windows experience. Based on the screenshot you posted follow these steps to re-grant Windows the permissions it needs to complete the installation.
1. Download and install SubInACL from Microsoft.
2. Assuming you installed SubInACL to the default path "C:\Program Files\Windows Resource Kits\Tools\" then from Start Menu Run... execute:
"C:\Program Files\Windows Resource Kits\Tools\subinacl.exe" /file "C:\Documents and Settings\All Users\Application Data\Apple Computer\iTunes\SC Info" /grant=SYSTEM
3. Install iTunes 7

HT1926 "the feature you are trying to use is on a network resource" message error when installing itunes

"the feature you are trying to use is on a network resource" is the message error I received when installing itunes. I downloaded the file and saved it. The same thing happended when I simply ran it as well.

Hello, uclan1.
This article will help you with the error that you are receiving.
"The feature you are trying to use is on a network resource that is unavailable" alert when removing Apple software in Windows
http://support.apple.com/kb/TS3704
Cheers,
Jason H.

Error Message Installing iTunes 10.5.3.

I can not install iTunes 10.5.3, i get the error notification that one of the programs of the instalation could not be finalized properly
Chris

Instead of downloading from Apple updates on my computer, I went to apple.com, loaded it from there and the update worked fine.

Error when installing itunes version 9 on Windows Vista 32bit

When trying to install itunes version 9 an error has come up before the installation is complete.
The error reads -
An error occurred during the installation of assembly
'microsoft Vo80.CRT,version = "8.0.50727.4053,"type="wn32",publickey token=1fc8b3b9ale18e3b" process or architecture="x86"
HRESULT.0x800736133
Can anyone help me - I am using windows vista 32bit. Have tried turing off ALL security and reinstalling as someone else suggested previously. But still have had no luck
Thanks

Thanks Emma!
Ox800736B3
Not a lot of documentation on that one, I'm afraid, but there's some general principles troubleshooting we can try with it that might get us moving forwards.
(1) Do you currently have a copy of the Microsoft Visual C++ 2005 Redistributable Package installed on that PC? If so, try downloading the following security update:
[Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update|http://www.microsoft.com/downloads/details.aspx?familyid=766a6af7-ec73-4 0ff-b072-9112bab119c2&displaylang=en#filelist]
Does iTunes install for you after applying that update?
(2) If no joy there, head into your Windows Update and click on the Update History. Have a lot of Updates also been failing for you recently? If so, doubleclick on the entries for the failed updates to bring up more information on each. What error codes appear for you for the failed updates? (Precise spelling, please.)

Cannot open key error while installing itunes on windows vista 64bit

I have downloaded iTunes to my desktop, disconnected from net, disabled firewall, and ran as administrator. Now I get an error saying: Could not open Key: UNKNOWN\Components\DA42BC89BF25F5BDOAF18C3B9B1AEE8\FD563AF386D2DE54F8388C8A8336 E1534 verify that you have sufficient access to that key or contact you support personnel. Any suggestions??? Have tried for several weeks, to get iTunes 9.0 to install & run, am very frustrated, please help!!!

This is caused by a permissions issue with some of the apple registry keys. You need to uninstall every apple application and fix the registry permissions. I have written up the details of this below which I am sending to Apple support:
Issues with Iphone Sync on Windows 7 64x after migration
1) Uninstall all Apple Software components in the order recommended
a. Itunes
b. Quicktime
c. Apple Software update
d. Apple mobile device Support (Note: If this does not uninstall – It could be related to Registry permissions. Make sure to do Step 4)
e. BonJour
f. Apple Application Support
2) Verify all Itunes Related components are completely uninstalled (Refer to http://support.apple.com/kb/HT1923)
3) Try to Reinstall Itunes
4) If you receive Error during install : Cannot Open Key: UNKNOWN Components/
a. Get into the registry Start >> Search Programs and Files >> Regedit
b. Access the following Location: HKEYLOCALMACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Co mponents
c. Perform the following actions
i. Right Click on Components Folder
ii. Select Permissions
iii. Select Full Control and Read Permissions options
iv. Select Advanced Button
v. Select Owner Tab
vi. Select to Change Owner to the Administrators
vii. Check the option “Replace owner on subcontainers and objects”
viii. Select OK when prompted that it may not change all.
ix. Select Apply
x. Select Apply again
xi. Exit the Registry Editor
5) Reinstall Itunes
Good Luck
cyn

Error on installing Itunes 10.5 on Windows Vista 64 Bit

Hi All,
I am receiving below error when I try to install Itunes 10.5 on my Windows Vista 64 Bit .... But was able to install 10.4.1 succesfully .
"An error ocurred during the installation of assembly
'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32,publ
ickeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86".
Please refer to Help and Support for more information.
HRESULT:0x8007054F"
Please Advise .

Its a Issue with your C++ Library on your computer, a way to fix it is to Rebuild your entire C++ Library from uninstalling the highest version to the lowest verision and reinstalling them back in chronological order..
I would suggest to contact apple support, request a Senior advisor they should be able to get that squared away, now if your not in phone support period you will probably have to pay for support.
I'd suggest the apple care if you havent got it yet

Error when installing itunes 10 on windows 7 64 bit

why do I keep n getting the error messages when i try and install itunes on windows 7 64 bit. But sometimes it will install but once it gets done it say that something is not install I need to uninstall and reinstall itunes..... is there something I need to do to get this to work....

HRESULT:0x800736FD
It's rarer to see these on Windows 7 than it is on Vista. Somtimes they're a bit easier to deal with on 7, too.
First, head to Windows Update and see if you can update the PC. If you can, and you collect updates without any errors, try another iTunes install.
If you get errors installing Windows Updates, double click on the failed updates in your Update history to bring up a small window containing alphanumeric codes for the erros. Are they also 800736FDs, or are you getting other error codes?

Error when installing Itunes 10

I have uninstalled and re-installed Itunes several times - I've even managed to delete the users/AppData/Local/Temp, as advised somewhere else - but, on installing iTune 10, the process seems to go well for a good while (copying, deleting files, registering, validating ... etc) then I get the error message:
"Error writing to C;\Program Files\iTunes\iTunes.Resources\de.lproj\EULA.nib\objects.xib.
Verify that you have access to that directory."
Thing is iTunes was working fine but then one day it decided to re-install, failed and I am where I am.
Any help out there? I have bought Windows 7 in desperation - Vista does seem to fall about on occasions. Maybe this will help?

*replying to raige*
"Error writing to C;\Program Files\iTunes\iTunes.Resources\de.lproj\EULA.nib\objects.xib. Verify that you have access to that directory."
That one is consistent with disk or file damage, raige.
First try running a disk check over your C drive. There's Vista instructions in the following document. Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors (you'll be prompted to reschedule the disk check for the next time you restart your computer). This sort of scan should take a while ... if it stops after a few minutes or seconds, something is interfering with the scan.
[Check your hard disk for errors|http://windows.microsoft.com/en-us/windows-vista/Check-your-hard-disk-fo r-errors]
Does the disk check find/repair any damage? If so, try another iTunes install. does it go through properly this time?
null

Error after install iTunes setup: Apple application Support was not found

Hello,
I am trying to install iTunes on my pc. During the downloading of iTunes setup.exe i get this error:
Something went wrong during the installation of this item. Microsoft. VC80.CRT, type="win32", version="8.0.5072.7.6195", publicKeyToken="lfrc8b3b9a1e18e3b",process or Architecture=x86"
I choose 'ok' and the download continues. When the download is complete and i try to open the iTunes setup its given the error saying:
Apple Application Support was not found
Apple Application Support is required to run iTunesHelper. Please uninstall iTunes then install iTunes again.
I tried this more than once, but its not working. I also tried to extract the iTunes setup.exe with winrar and then to do an install with appleapplicationsupport.msi, but its given the same error.
Anyone please has some advice?
Thanks in advance!
Marieke

When I look at my control panel the only program that shows is "I Tunes". No other supporting programs are showing up in the control panel nor the Common Files nor in the Program Files (x86).
That's an extreme case of this.
We'll try doing standalone installations of all the supporting programs.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone Apple Mobile Device Support install.
Doubleclick the AppleSoftwareUpdate.msi to do a standalone Apple Software Update install.
Doubleclick the Bonjour.msi (or Bonjour64.msi) to do a standalone Bonjour install.
Do those four installs go through okay? If so, does your iTunes launch without any errors now?

Apple pls fix this - MS Visual C++ Runtime error after installing itune 9.1

Ever since I upgraded itune to the latest version 9.1, I kept getting the error messasge below when I start up the computer. Tried restoring system to a previous date, and uninstalling & installing itune a couple times to no avail. Any idea what's going on and how to fix this? I had to remove itune to be able to use my computer (ugh). The irony is that the itune upgrade was mainly to enable ipad. Now that I have my ipad I can't use itune.
The error message reads:
'MS Visual C++ Runtime Error' - 'Runtime Error'
This application has requested the Runtime to terminate in an unusual way. Please contact the support team for further assistnace.

Some people have reported that Apple Software Update can cause this error, so you might try removing that and see if it helps. Removing that utility should not affect iTunes, though you won't get automatic updates (you can just download any new version of iTunes or QuickTime manually and install it). It would, however, be wise to make a backup of any purchased content or items that would otherwise be difficult to replace, just in case something goes wrong during the removal.

Error in installing itunes

Similar Messages

Maybe you are looking for