Error in installing Mac OSX 10.7
I have a problem with installing the 10.7 upgrade, it basically keeps showing the below error
please help im tired of redownloading the software over and over !
http://www.apple.com/support/mac/app-store/contact.html?form=account
Similar Messages
-
Error when Install Mac OSX 10.4
when i install MacOSX 10.4 .NO WORK .
Jun 29 03:33:42 localhost : Launching the Language Chooser for an OS Install
Jun 29 03:33:48 localhost : Found primary language hint "en"
Jun 29 03:33:49 localhost : Language Chooser ready
Jun 29 03:33:53 localhost : Launching the Installer using language code "English"
Jun 29 03:33:54 localhost : @(#)PROGRAM:Install PROJECT:Install-115 DEVELOPER:root BUILT:Mar 24 2005 19:49:35
Jun 29 03:33:54 localhost : @(#)PROGRAM:Installer PROJECT:Installer-83 DEVELOPER:root BUILT:Mar 22 2005 20:32:47
Jun 29 03:33:54 localhost : Hardware: PowerMac3,5 @ 799 MHz, 768 MB
Jun 29 03:33:54 localhost : Running OS Build: 8A451
Jun 29 03:33:54 localhost : It took 0.278490 seconds to parse the distribution script "OSInstall.dist"
Jun 29 03:33:54 localhost : Mac OS X Installation Log
Jun 29 03:33:54 localhost : Opened from: /System/Installation/Packages/OSInstall.mpkg
Jun 29 03:33:56 localhost : It took 1.461881 seconds to load 8 UI sections
Jun 29 03:33:56 localhost : Entering Introduction section
Jun 29 03:33:56 localhost : Physical Memory Allocation: 62 MB wired, 61 MB active, 47 MB inactive, 170 MB used, 596 MB free, 768 MB total
Jun 29 03:33:56 localhost : It took 0.203663 seconds to -[IFDistXMLDocument readAndValidateDocument]
Jun 29 03:33:56 localhost : It took 2.872909 seconds to finish launching.
Jun 29 03:33:56 localhost : It took 0.020385 seconds to perform the Installation Check
Jun 29 03:33:56 localhost : Installation checks failed.
Jun 29 03:33:57 localhost : Installation check failure. (null). This software cannot be installed on this computer..
Jun 29 03:34:00 localhost : It took 5.829122 seconds to do the initial process of the targets
PLEASE HELP ME ????????Are you using a disk meant for a different computer?
I don't know?
Where did the disk come from? Did it come from Apple in a box with instructions? What color is it? Does it specify a computer model (e.g. Power Mac G4)? I am asking because you got the error message:
" Installation check failure. (null). This software cannot be installed on this computer.." -
Error Code: 34 Mac OSX 10.8.4 for Photoshop CC, Bridge CC, After Effects CC, and Flash CC
Hello,
So I am installing all the CC versions of the software and all but Photoshop, Bridge, After Effects, and Flash installed without a hitch. On those 4 programs I get the same error code: 34. I am able to install the CS6 variants of them without any problem and run it. Here is the error code:
Exit Code: 34
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 1 fatal error(s), 0 error(s)
FATAL: Payload 'Camera Profiles Installer_8.1_AdobeCameraRawProfile8.0All 7.0.0.108 {D5BBDFC0-C716-46B1-8908-85B0EA49FFA1}' information not found in Media_db.
I have been unable to fix this on my own and with what I've found online. I'll list what I have done so far to try to fix this issue. I have tried to use the Adobe Creative Cloud Cleaner Tool but the issue is since PS, BR, AE, and FL won't install I can't clean them to try a fresh install. I tried installing the CS6 versions to see if it would dowload the 'Camera Profiles Installer_8.1".
Any help on fixing this ASAP would be much appreciated!
Thanks,
NBHey Guys I am experiencing the exact same iusse I spoke with adobe and they weren't able to solve the issue here's log.
I'm pasting the fatal errors from photoshop hope this helpful
06/18/13 12:02:45:614 | [FATAL] | | OOBE | DE | | | | 19669 | Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 12:02:46:615 | [INFO] | | OOBE | DE | | | | 19669 | - 1 fatal error(s), 0 error(s)
06/18/13 12:02:46:615 | [INFO] | | OOBE | DE | | | | 19669 | FATAL: Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 12:13:17:103 | [FATAL] | | OOBE | DE | | | | 26756 | Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 12:13:18:104 | [INFO] | | OOBE | DE | | | | 26756 | - 1 fatal error(s), 0 error(s)
06/18/13 12:13:18:104 | [INFO] | | OOBE | DE | | | | 26756 | FATAL: Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 12:20:13:772 | [FATAL] | | OOBE | DE | | | | 31392 | Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 12:20:14:774 | [INFO] | | OOBE | DE | | | | 31392 | - 1 fatal error(s), 0 error(s)
06/18/13 12:20:14:774 | [INFO] | | OOBE | DE | | | | 31392 | FATAL: Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 13:07:14:983 | [FATAL] | | OOBE | DE | | | | 16841 | Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 13:07:15:984 | [INFO] | | OOBE | DE | | | | 16841 | - 1 fatal error(s), 0 error(s)
06/18/13 13:07:15:984 | [INFO] | | OOBE | DE | | | | 16841 | FATAL: Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 13:19:33:315 | [FATAL] | | OOBE | DE | | | | 24315 | Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 13:19:34:316 | [INFO] | | OOBE | DE | | | | 24315 | - 1 fatal error(s), 0 error(s)
06/18/13 13:19:34:316 | [INFO] | | OOBE | DE | | | | 24315 | FATAL: Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 13:21:06:794 | [FATAL] | | OOBE | DE | | | | 25240 | Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 13:21:07:796 | [INFO] | | OOBE | DE | | | | 25240 | - 1 fatal error(s), 0 error(s)
06/18/13 13:21:07:796 | [INFO] | | OOBE | DE | | | | 25240 | FATAL: Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 13:21:30:440 | [FATAL] | | OOBE | DE | | | | 25537 | Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 13:21:31:441 | [INFO] | | OOBE | DE | | | | 25537 | - 1 fatal error(s), 0 error(s)
06/18/13 13:21:31:441 | [INFO] | | OOBE | DE | | | | 25537 | FATAL: Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 13:47:18:185 | [FATAL] | | OOBE | DE | | | | 9822 | Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 13:47:19:186 | [INFO] | | OOBE | DE | | | | 9822 | - 1 fatal error(s), 0 error(s)
06/18/13 13:47:19:186 | [INFO] | | OOBE | DE | | | | 9822 | FATAL: Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 13:47:58:563 | [FATAL] | | OOBE | DE | | | | 10207 | Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 13:47:59:565 | [INFO] | | OOBE | DE | | | | 10207 | - 1 fatal error(s), 0 error(s)
06/18/13 13:47:59:565 | [INFO] | | OOBE | DE | | | | 10207 | FATAL: Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 13:48:24:091 | [FATAL] | | OOBE | DE | | | | 10483 | Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 13:48:25:092 | [INFO] | | OOBE | DE | | | | 10483 | - 1 fatal error(s), 0 error(s)
06/18/13 13:48:25:092 | [INFO] | | OOBE | DE | | | | 10483 | FATAL: Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 13:54:20:032 | [FATAL] | | OOBE | DE | | | | 14779 | Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 13:54:21:034 | [INFO] | | OOBE | DE | | | | 14779 | - 1 fatal error(s), 0 error(s)
06/18/13 13:54:21:034 | [INFO] | | OOBE | DE | | | | 14779 | FATAL: Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 14:15:39:774 | [FATAL] | | OOBE | DE | | | | 28845 | Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 14:15:40:775 | [INFO] | | OOBE | DE | | | | 28845 | - 1 fatal error(s), 0 error(s)
06/18/13 14:15:40:775 | [INFO] | | OOBE | DE | | | | 28845 | FATAL: Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 14:27:33:665 | [FATAL] | | OOBE | DE | | | | 37134 | Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 14:27:34:666 | [INFO] | | OOBE | DE | | | | 37134 | - 1 fatal error(s), 0 error(s)
06/18/13 14:27:34:666 | [INFO] | | OOBE | DE | | | | 37134 | FATAL: Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 14:49:31:860 | [FATAL] | | OOBE | DE | | | | 48667 | Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 14:49:32:862 | [INFO] | | OOBE | DE | | | | 48667 | - 1 fatal error(s), 0 error(s)
06/18/13 14:49:32:862 | [INFO] | | OOBE | DE | | | | 48667 | FATAL: Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 16:05:56:669 | [INFO] | | OOBE | DE | | | | 16619 | - 0 fatal error(s), 2 error(s)
06/18/13 16:09:05:111 | [INFO] | | OOBE | DE | | | | 19310 | - 0 fatal error(s), 2 error(s)
06/18/13 16:29:47:953 | [FATAL] | | OOBE | DE | | | | 11765 | Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 16:29:48:954 | [INFO] | | OOBE | DE | | | | 11765 | - 1 fatal error(s), 0 error(s)
06/18/13 16:29:48:955 | [INFO] | | OOBE | DE | | | | 11765 | FATAL: Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
Error Code: 34 Mac OSX 10.8.4 for Photoshop CC, Bridge CC, After Effects CC, and Flash CC -
Can not install Mac OSX Update Combo10.4.5 PPC
I have a clean installation of Tiger on a Power Mac G4 (AGP graphics) with Sonnet 1 ghz processor upgrade, updated to 10.4.3 by running Software Update. No other updates available at this time.
So I downloaded MacOSXUpdCombo10.4.5PPC.dmg and it stops at "Select a Destination."
"You cannot install Mac OSX Update Combined (Power PC) on this volume. This volume does not meet the requirements for this update."
I must have installed this update previously, to get to 10.4.6, to install Adobe CS3 which REQUIRES 10.4.6.
Now I can't figure out how I got this update installed - sorry if this has been posted previously.
This isn't my main machine, thankfully, but I use it as a spare in the studio to transfer images to.
Can anyone help me get this OS updated to 10.4.6?
I don't have the original processor, so re-installing it isn't an option.
Thanks.No, I wouldn't ignore them, I think we really have more messed up than just this, and if any of these steps fix it, we'll likely need new downloads.
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
May even need to do an Archive and Install if you have room on the HD, but saves all your files and gives a new OS...
http://docs.info.apple.com/article.html?artnum=107120
I only use Software Update to see what is needed, then get them for real via...
http://www.apple.com/support/downloads/
That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.
If all the above fails, then it appears to be time for an Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space...
http://docs.info.apple.com/article.html?artnum=107120
Just be sure to select Preserve Users & Settings. -
After installing Mac OSX Snow Leopart 10.6.3 my HP Photosmart C5500 won't scan to computer. The printer is working. What do I have to do to be able to scan again?
Often, you have to download updated vendor software drivers when you switch operating systems. HP doesn't list a C5500 on their web site, however, here's the link to the OS X 10.6 C5540 software. If you have one of the other C55xx models, look for the updated driver/scan software on their software/driver download section of HP.Com.
-
Problem installing Mac OSX on my new MacBook hard drive...
Hi,
i am beside myself again...(i just visited my local Genius bar this afternoon). Any help would be most appreciated! :o)
i purchased a 2.5 inch SATA Fujitsu 120GB laptop hard drive for my new MacBook. Followed the awesome* instructions on "how to replace/upgrade hard drive", and took out the original Toshiba HD. What the instructions* failed to mention was that i would eventually need to use a Torx screwdriver (star-shaped) to remove the caddy/carriage from the Toshiba HD. Got that the next day and replaced the Toshiba 80GB with my new 120GB Fujitsu drive..., it slipped into place nicely but i did notice that the Toshiba had four short wires protruding out to the right of the contacts, which my new Fujitsu didn't have... hmmmm...?!
anyways, tried to install Mac OSX on the new drive, booted up with the install disc... went thru' chosing the language (English), agreed to the second step... but when it came time to install, there was NO icon at all in the box where i am asked where i want to install it!!!
so i go to disk utilities, and see that my Fujitsu HD is indeed recognized, but none of the buttons in first aid are active... so i can't check it.
i figured that had to do with the four little wires, so i replaced the original Toshiba and made a reservation with Genius Bar to ask for assistance.
this afternoon, i explained my problem and was told the four wires have NOTHING to do with it... Lawrence (the genius) told me to (actually, first he said Apple does not recommend my doing this... and that i should go to a 3rd party computer store such as Dino to get help!) go back to disk utilities and partition, then erase this drive and then i will see the icon for this drive in the install box.
Well i did everything i was told to do and... still, there is no icon for my Fujitsu HD! :o(
I was able to partition, after which there was a disc0 under the Fujitsu drive on the left side of the disk utilities. When i go to system profiler, and click on ATA... it too shows the Fujitsu drive... but i cannot install because there is NOTHING to click on at the installation step! the "continue" button is not active and only the "back" button is actively mocking me!!!
i know many of you have successfully upgraded your hard drive... what am i doing wrong? Would a different brand work better? I know Seagate is quite popular, and OWC sells a Western Digital version as well as a Hitachi... do those four little wires make a difference? Would the Seagate come with those wires???
i am going crazy... thanks, and sorry for the long post, just wanted to let you know what i've done!
blue skies,
ps. please feel free to email me at [email protected] if you think that would be better! :o)Hi,
...after getting back from school, my MacBook was STILL in the process of verifying and "supposedly" repairing... since i was gone for over 10 hours, i finally assumed the drive was either defective or just incompatible, and quit disk utility.
...this morning i went out and bought a new Seagate 120GB SATA (they didn't have 160GB SATA drives, only 160GB ultra-ATA drives) 2.5 inch HD. This one DID have those four wires to the right of the contacts... (i don't know how important they are), and after changing and exchanging the Toshiba/Fujitsu HDs, it was a breeze putting in the new Seagate drive.
Erased > patritioned > and sure enough, the icon showed up and the biggest smile showed up on my face as i finished installing! :o)
I contacted the original seller of my fujitsu hd (it was a 2.5 inch, 120GB, serial ATA notebook drive) and he was kind enough to say "just pack it up and send it back for a refund!" (minus shipping and re-stocking fees of course! :o)
Just wanted to mention that, the fujitsu hd WAS recognized by disk-utility and at the bottom left of the window it said that the fujitsu was "GUID partitioned"..., so i am still scratching my head as to why it didn't work?!
I want to thank everyone that offered advice, it was helpful and i feel more comfortable with my MacBook after this trying and very frustrating episode! :o)
blue skies, -
How to make a image file from Pre installed Mac osx ? "PLEASE HELP :("?
hey guys ..Thanks u for the time.
So i have this eMac which has crashed and i have got may hands on another eMac.. and it works
... the only problem is.. I can take my eMac to the working eMac to do Target Mode or any thing...
So Help me..
My question is .. Is there a way to make a .DMG image file from pre installed mac osx OR
Is there a way to may a recovery disc??You can use Carbon Copy Cloner to copy everything from the working eMac onto the non-working eMac while the working eMac is running. If your eMac will still do target mode into the working one, you can download the above software, select the booted drive as the source drive, and your eMac's drive as the target, however it is possible this will not work.
When you say your eMac crashed, what exactly happened? It is possible that the hard drive in your eMac failed or is failing, so in order to get it running again you would need to replace the hard drive. On the eMac, this repair is somewhat involved, and you have to be very careful because it exposes the CRT, which has several areas which can be extremely dangerous to touch if not properly handled. CRTs retain a great deal of voltage, even when unplugged, sometimes for weeks, and they can give you a nasty shock if you touch them in the wrong place.
Also keep in mind that cloning from the working computer to the non-working computer will ERASE any data that you have stored on that eMac, so if you don't have it backed up anywhere, you may want to attempt that with target mode before proceeding.
Good luck! -
I installed Mac OSX Snow Leopard 10.6.3 And now my Java is not working,what can I do to fix's this?
Run Software Update to get to 10.6.8 and update Java.
-
My MacBook Pro (version 10.7.5 4GB)keeps crashing with the error message 'Your MAC OSX start up disk has no more space available for application memory' - what do i do. I keep force quitting the applications and turning the computer off but it happens again after a while
Hhow much goal and free hard disk space is available? Sounds like you need to move some things off of that hard drive.
-
I want to go back to Snow Leopard but I get "you have to install mac osx.app 23.1.1
I have a new 21.5 iMac I just purchased July 9 so I was able to download Lion for free under the up-to-date program. After installing Lion I decided I wanted to go back to Snow Leopard for various reasons. When I restart with the original Snow Leopard DVD that came with my machine and holding the C key down, I get the window for Mac OS X install DVD. I click the icon to install SL and another window pops up stating "You can't use this version of the application. Install Mac OSX.app with this version of Mac OSX. You have to install Mac OSX.app 23.1.1" To answer the question before hand....I don't have a time machine backup.
Thanks for all your help guys. I had trouble with my first install of Lion, it seemed buggy and when I tried some of the suggestions you offered, my machine did not always react the way it should have. I thought that was weird because it's a new iMac, only three weeks old. Pondini pointed me in the right direction and I think Lion is stable now. This worked after a few tries, not sure why I wasn't getting consistent results but it worked eventually.
1. Shut the computer down.
2. Hold "command" and "R" and turn on the computer (I believe this is recovery HD from the internet because it wasn't working from my hard drive)
3. After a few unsuccessful tries, and repeating #1 and #2, I finally got a window to reinstall Lion. This took about an hour to download and after that things went as expected.
As long as Lion is more stable than it was on my first install, which it seems to be now, I'll just stay with it. After this experience, I would say "make sure you need the features in Lion, and that all your current programs are compatible with Lion before you forge ahead."
Thanks again -
I am trying to re-install the Mac OSX snow leopard onto an older I mac with a new hard drive. I run into the "select the disk "where you want to install Mac OSX but there is nothing in the window to select. Any advice?
After you install a new hard drive, you need to boot to another drive to initialize it to MAC OS Extended (journaled) format and create the partition(s) on the drive. You do this using Disk Utility. Otherwise, the mac operating install process doesn't see a formatted disk to install to.
-
I'm trying to install Mac OSX on an external drive with my Mac Mini
A few days ago, I picked up my new Mac Mini. I'm using the install disk included with the Mini in an attempt to install Mac OSX 10.4.5 onto my external hard drive - a LaCie d2 200GB.
The installer knows the LaCie is there - but it won't let me install it there. I had no problem doing this with my last Mac (Power Mac G4). Does anyone have any suggestions?
Mac Mini Duo Core 1.66Mhz Mac OS X (10.4.7) LaCie d2 Firewire Hard Drive 200GBIf you are using an Intel mac mini you need to change the partition scheme. Without doing this the Intel Macs cannot boot from the drive.
To do this you need to open Disk Utility, select your drive (not the partition), then select the Partition tab. In there you'll see an Options… button. Click on it and change the partition scheme to GUID Partition Table. Click OK and then apply the reparitioning.
Please be aware that by making this change you will be able to boot your Intel Mac from the drive although a PowerPC drive will no longer be able to use the drive as a boot drive. -
Just installed mac osx snow leopard upgade and connected my printer too, and realized I have lost sound! Can anyone help?
In case I misunderstood, did you mean that the 10.6.3 version of Snow Leopard was the upgrade? If so you need to update via 10.6.6 to 10.6.8. These updates can correct minor system upsets.
And ... did you also repair permissions both before and after you upgraded. You should do this when you progress via 10.6.6 to 10.6.8 too. -
Hi I am getting below error on my MAC OSX 10.6 Server
Hi,
I am getting below error on my MAC OSX 10.6 server MAC Pro machine.
Please let me know what this means?
Interval Since Last Panic Report: 8518861 sec
Panics Since Last Report: 1
Anonymous UUID: F1F85B83-6DC2-4E6C-B02C-D1D42F15F321
Wed Jan 25 16:22:19 2012
panic(cpu 3 caller 0x2abf6a): Kernel trap at 0x00926b00, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000054, CR3: 0x00100000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x080a7600, ECX: 0x00000000, EDX: 0x098da5a4
CR2: 0x00000054, EBP: 0x56e8be78, ESI: 0x098da500, EDI: 0x080cf800
EFL: 0x00010202, EIP: 0x00926b00, CS: 0x00000008, DS: 0x080c0010
Error code: 0x00000002
Backtrace (CPU 3), Frame : Return Address (4 potential args on stack)
0x56e8bc88 : 0x21b837 (0x5dd7fc 0x56e8bcbc 0x223ce1 0x0)
0x56e8bcd8 : 0x2abf6a (0x59e3d0 0x926b00 0xe 0x59e59a)
0x56e8bdb8 : 0x2a1a78 (0x56e8bdd0 0xcc5c600 0x56e8be78 0x926b00)
0x56e8bdc8 : 0x926b00 (0xe 0x98d0048 0x56e80010 0x530010)
0x56e8be78 : 0x927ff8 (0x98da500 0x80a7600 0x5000 0x0)
0x56e8bec8 : 0x98b7aa (0x98da500 0x80cf800 0x2 0x0)
0x56e8bf08 : 0x98e014 (0x8086c00 0x8087f9c 0x0 0x807d580)
0x56e8bf28 : 0x552ea6 (0x8087c00 0x0 0x0 0x4fbef7e4)
0x56e8bf88 : 0x552eea (0x8087f80 0x8087f80 0x0 0x1)
0x56e8bfc8 : 0x2a179c (0x8087f80 0x0 0x2a17ab 0x7e0d564)
Kernel Extensions in backtrace (with dependencies):
com.ATTO.driver.ATTOCelerityFC(3.4.6)@0x943000->0x99afff
dependency: com.apple.iokit.IOSCSIParallelFamily(2.1.1)@0x923000
dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x92c000
com.apple.iokit.IOSCSIParallelFamily(2.1.1)@0x923000->0x92bfff
dependency: com.apple.iokit.IOSCSIArchitectureModelFamily(2.6.8)@0x909000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
System model name: MacPro1,1 (Mac-F4208DC8)
System uptime in nanoseconds: 1825402534727490
unloaded kexts:
com.apple.iokit.IOUSBMassStorageClass 2.6.7 (addr 0x1284000, size 0x49152) - last unloaded 1132024965088576
loaded kexts:
com.ATTO.driver.ATTOCelerityFC 3.4.6
com.apple.filesystems.smbfs 1.6.7 - last loaded 267231229373759
com.apple.filesystems.afpfs 9.7.1
com.apple.nke.asp_tcp 5.0
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleUpstreamUserClient 3.5.7
com.apple.driver.AppleMCCSControl 1.0.20
com.apple.driver.AppleHDA 2.0.5f14
com.apple.driver.AudioAUUC 1.57
com.apple.GeForce 6.3.6
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.AppleMCEDriver 1.1.9
com.apple.driver.AppleIntelMeromProfile 19
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0a1
com.apple.driver.AppleLPC 1.5.1
com.apple.iokit.SCSITaskUserClient 2.6.8
com.apple.BootCache 31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 1.6.4
com.apple.driver.AppleIntel8254XEthernet 2.1.3b1
com.apple.driver.AppleFWOHCI 4.7.3
com.apple.driver.AppleUSBHub 4.2.4
com.apple.driver.AppleAHCIPort 2.1.7
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleUSBEHCI 4.2.4
com.apple.driver.AppleUSBUHCI 4.2.0
com.apple.driver.AppleACPIButtons 1.3.6
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.3.6
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 142.6.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.14
com.apple.driver.AppleIntelCPUPowerManagement 142.6.0
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.DspFuncLib 2.0.5f14
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.nvidia.nv40hal 6.3.6
com.apple.NVDAResman 6.3.6
com.apple.iokit.IONDRVSupport 2.2.1
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.4.5f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.8.3fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 2.0.5f14
com.apple.iokit.IOGraphicsFamily 2.2.1
com.apple.iokit.IOHDAFamily 2.0.5f14
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleSMC 3.1.0d5
com.apple.driver.IOPlatformPluginFamily 4.7.0a1
com.apple.driver.AppleUSBHIDMouse 162
com.apple.driver.AppleHIDMouse 162
com.apple.driver.AppleUSBHIDKeyboard 141.5
com.apple.driver.AppleHIDKeyboard 141.5
com.apple.iokit.IOUSBHIDDriver 4.2.0
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.8
com.apple.driver.AppleUSBMergeNub 4.2.4
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.8
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6.1
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IONetworkingFamily 1.10
com.apple.iokit.IOATAPIProtocolTransport 2.5.1
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IOUSBUserClient 4.2.4
com.apple.iokit.IOSCSIParallelFamily 2.1.1
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.8
com.apple.iokit.IOAHCIFamily 2.0.6
com.apple.iokit.IOATAFamily 2.5.1
com.apple.iokit.IOUSBFamily 4.2.4
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.6
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 289.1
com.apple.iokit.IOStorageFamily 1.6.3
com.apple.driver.AppleACPIPlatform 1.3.6
com.apple.iokit.IOPCIFamily 2.6.5
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacPro1,1, BootROM MP11.005C.B08, 4 processors, Dual-Core Intel Xeon, 2.66 GHz, 4 GB, SMC 1.7f10
Graphics: NVIDIA GeForce 7300 GT, NVIDIA GeForce 7300 GT, PCIe, 32768 MB
Memory Module: global_name
Network Service: Ethernet 1, Ethernet, en0
PCI Card: NVIDIA GeForce 7300 GT, sppci_displaycontroller, Slot-1
PCI Card: ATTO Celerity FC-42ES, sppci_fibrechannel, Slot-2@15,4,0
PCI Card: ATTO Celerity FC-42ES, sppci_fibrechannel, Slot-2@15,4,1
Serial ATA Device: WDC WD2500JS-41MVB1, 232.89 GB
Parallel ATA Device: PIONEER DVD-RW DVR-111D
Fibre Channel Device: SCSI Target Device @ 0
Fibre Channel Device: SCSI Target Device @ 1
Fibre Channel Device: SCSI Target Device @ 2
USB Device: Hub, 0x05ac (Apple Inc.), 0x9130, 0xfd500000 / 3
USB Device: Apple Cinema Display, 0x05ac (Apple Inc.), 0x9222, 0xfd520000 / 4
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfd100000 / 2
USB Device: Apple Optical USB Mouse, 0x05ac (Apple Inc.), 0x0304, 0xfd130000 / 6
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0220, 0xfd120000 / 5
FireWire Device: built-in_hub, Up to 800 Mb/sec
FireWire Device: unknown_device, UnknownAny news from ATTO? newer driver?
did it just start but began after "xyz"?
Have you run Apple Hardware Test?
Take out the ATTO card and / or boot in Safe Mode and things are fine?
And while the Nvidia 7300GT hasn't yet failed, might want to look into a replacement for it, too.
OS X Snow Leopard Server Community:
https://discussions.apple.com/community/servers_enterprise_software/mac_os_x_ser ver_v10.6_snow_leopard -
I just installed Mac OSX (10.6.8) and can not get Quick time player to work. When I go to the Apple site to download a version that will work, it states that Quick Time Player automatically comes with OSX. What do I need to do to use Quick Time Player with 10.6.8
Mac OS X 10.6 includes QuickTime versions 10.0 and 7.6.3. The QuickTime 7 player will only be present if a QuickTime Pro key was present at the time of installation, or if specified as part of a custom install, or individually downloaded:
http://support.apple.com/kb/dl923
Snow Leopard update 10.6.4 included an update to 7.6.6 (if installed). You can install it from the above link even though it says for 10.6.3. It's the same version of QuickTime Player 7.6.6.
(Only QuickTime Player 7.6.3 or 7.6.6 can be updated to "Pro".)
Maybe you are looking for
-
How do I delete my itunes account and start over?
I've had it with trying to get help with removing apps from my previous purchases. My son downloaded some questionable apps and now they show up on all my family's devices under "Purchase". I would like to just abandon the old account and create a
-
My ipod touch was stolen and I need the serial number for the police report how can i recover it
my ipod touch was stolen and i need the serial number for the police report how can i get that
-
Install OS X on a Digital Audio G4 with a new HDD
I picked up a Digital Audio G4 from a university surplus sale and I thought I'd play around with it. Unfortunately it came with no Hard Drive, but I managed to scrounge one up. I've got a set of OS X 10.4 install CDs that I know work but I can't seem
-
No notification on text messages on Z10 after the 10.2.1.3062 update
I have recently updated my phone to the new 10.2.1.3062 which had 28mb on my Z10, now there is no notification on text messages. messages are just poping through silently. no LED, no Sound. absolutely nothing. on text message icon on homescreen there
-
Can I convert Twitter time Text to Project Siena's Date Value ?
Can I convert Twitter time Text to Project Siena's Date Value ? I want to show localtime of Twitter created_at. Twitter time text = ThisItem!created_at , ex: Tue Jul 15 17:19:00 +0000 2014 I want to show 2014/07/16 02:19 by Japan localtime. Regards,