Error in installing of Windows 7 with the use of DVD-RW SATA and HD SATA on the motherboard M2N-VM HDMI

The instalation stops in the middle, when the DVD-RW stops the read of DVD for Windows 7 instalation. One message shows that reading of CD instalation is failing.
I can to install only the Windows XP.

Hi,
Based on your description, I know your DVD-RW could read Windows XP installation disk, but fail to read your Windows 7 DVD. If it is possible, please test if the Windows
7 DVD can be read on other computers.
I also suspect it is caused by a broken DVD, if so, please contact the vendor where you purchased this copy of Windows7 or our customer service for help.
Microsoft Support
http://support.microsoft.com/
Hope it helps.
Alex Zhao
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

I have lost the use of my extension pannels, and need help recovering the use. I get a message that extensions failed to load. Why?

I have lost the use of my extension pannels, and need help recovering the use. I get a message that extensions failed to load. Why?

I've had that before when on a really slow Internet connection.

Jdeveloper 11g cannot be installed on Windows with Thai regional settings

I have no idea where to properly submit this issue. Hope I do not abuse this forum for too much.
Jdeveloper 11g cannot be installed on Windows with Thai regional settings configuration.
I've got "A fatal error has occurred. This application will terminate" error dialog, while installing.
I have to change my regional settings to English then install it and change my setting back later.
Regards

Sigh... This forum software doesn't even support image posting.
The error is every easy to reproduce.
1. On Windows XP, goto "Control Panel" -> "Regional and Language Options" -> "Standards and format"; and change that to "Thai"
2. Invoke "jdevstudio11110install.exe"
3. Always click "Next" until the error dialog appear.
<pre>
. Exit [x] .
. [!] A fatal error has occurred. This application will .
. terminate. .
. [[ OK ]] .
</pre>
From my experience, this always have something to do with the Buddhist Era year system (AD + 543).
Regards.

Error While Installing IDES ECC6 with SQL Server 2005

Dear Experts,
I found an error while installing IDES ECC6 with SQL Server 2005. The error is raising at the stage of 17 of 24 processing the procedure of 195 of 197 (sap_z_set_permissions).
I have tried several times by configuring different type of activites but still i am facing the same problem at the same stage. Please help me in thig regard.
I herewith pasted hereunder log files information
Regards,
B.Sudharsan
ERROR 2008-01-17 18:38:47
FCO-00011 The step ExeProcs with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_MSS|ind|ind|ind|ind|2|0|MssProcs|ind|ind|ind|ind|1|0|ExeProcs was executed with status ERROR .
INFO 2008-01-17 18:40:05
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_MSS|ind|ind|ind|ind|2|0|MssProcs|ind|ind|ind|ind|1|0|ExeProcs".
ERROR 2008-01-17 18:38:47
MDB-05053 Errors when executing sql command: <p nr="0"/> If this message is displayed as a warning - it can be ignored. If this is an error - call your SAP support.

Sudarshan,
Occasionally, mid-way through the upgrade, DB permissions to users might change. Check to see, if the users SAP<SID>, OPS$ users have the DBA privilege. Re-assign the role and try continuing with the upgrade.

Error when install sap license with 'saplicense -install'

Dear experts,
Error when install sap license with 'saplicense -install':
SAPLICENSE (Release 640) ERROR ***
    ERROR:   Can not set DbSl trace function
    DETAILS: DbSlControl(DBSL_CMD_IMP_FUNS_SET) failed with return code 20
    RC-INFO: error loading dynamic db-library - check environment for:
             dbms_type = <db-type> (e.g. ora)
             DIR_LIBRARY = <path to db-dll> (e.g. /usr/sap/SID/SYS/exe/run)
Could you gvie me any ieda?

Another way is to open a command prompt as nspadm and run saplicense -install
To do this follow the steps below
Click "Start" -> "Run..." and enter:
runas /u:nspadm cmd
Enter nspadm's password. A command prompt appears running as user nspadm. Now change to \usr\sap\nsp\SYS\exe\run and run
saplicense -install
Hope this helps.
Regards,
Klause

I can't install apps on my iphone using itunes from my PC ! I've downloaded the apps from itunes store. When I try to drag apps from itunes library to iphone, nothing happens. What should I do?

I can't install apps on my iphone using itunes from my PC ! I've downloaded the apps from itunes store. When I try to drag apps from itunes library to iphone, nothing happens. What should I do?

Try downloading the apps from your phone
App store > tap updates> tap purchased> tap not on this iphone> click on the cloud with the down arrow for the app you want to download"

Upgrade to Windows 10 by using my notebook as a tablet does not turn the screen

I realized that after doing my upgrade to Windows 10 by using my notebook as a tablet does not turn the screen (al realizar mi actualizacion a windows 10 mi laptop ya no gira la pantalla en modo tableta... y es 360 grados.. como lo resuelvo??? gracias!!!

i have the same problem with my envy x2 13 j002dx. tried reinstalling drivers and windows 10. the auto rotate button is there but doesnt do anything when i toggle it

HT5624 I have reset my password with my computer and I am in the process of updating my iPhone and I am at the enter password window and cannot continue

I have reset my password with my computer and I am in the process of updating my iPhone and I am at the enter password window and cannot continue.

The Password reset email sent----follow the directions in the email to reset your password is the message showing on my iPhone. I did not receive the email and reset my password using my computer. iPhone will not allow me to continue and is stuck in the above window. How do I enter my mew password on my iPhone?

I bought Lightroom 3 or 4, can't remember which, as an online download. I then upgraded to 5 with a CD. I registered the upgrade on my Adobe account and that's where the serial number is. I just bought a new iMac and am trying to install Lightroom. The sy

I bought Lightroom 3 or 4, can't remember which, as an online download. I then upgraded to 5 with a CD. I registered the upgrade on my Adobe account and that's where the serial number is. I just bought a new iMac and am trying to install Lightroom. The system is asking for my original serial number which I don't have. The point is. If I have the upgrade registered with my Adobe account, shouldn't that be proof that an earlier version was on my computer??? I'm really stuck. Need some advice! Thanks
Linda

Hi John,
Thanks for your response, but if you read my first mail, it's the original serial number that I don't have. I bought the original LR as download and have misplaced the serial number. Is there any way to find it???
Linda

Using Tiscali Webmail with Firefox 6. If I try and delete an email the Ok and Cancel buttons are disabled and nothing happens, have to use F5 to take me back. IE8 works so is this a compatibility issue?

Using Tiscali Webmail with Firefox 6. If I try and delete an email the Ok and Cancel buttons are disabled and nothing happens, have to use F5 to take me back. IE8 works so is this a compatibility issue?

It appears OP solved the problem: [/questions/874744]

I am facing issue when opening flash files in Flash CC. (error:- This file was created with a later release of Flash Professional and might contain new features that would be lost when saved in the current format.)

I am facing issue when opening flash files in Flash CC. (error:- This file was created with a later release of Flash Professional and might contain new features that would be lost when saved in the current format.)

Wow. Okay...
I'll let the real veterans in this forum tackle your issues one after the other. But, I can tell you, all will be well.
My only comment would be re: your computer specs:
BJReis wrote:
. This may be due to somewhat older equipment:
GHz Intel Core Duo MacBook Pro with a 4GB memory computer with Ddr3 running OSX 10.8.4
To be completely honest, FCPX is a RAM hog. It just is. But, RAM is relatively cheap, and the pay-off is good.
4GB is right on the edge, IMHO. 16G is ideal.
I wish you luck, hang in there, and standby for more help.

I just got a ipod nano 6th gen, and ive been using it for 2 days, and it seems that the battery just lasts about half a day, on playing 1 to 3 songs in intervals of 1-2 hours. Whats wrong with my ipod?

I just got a ipod nano 6th gen, and ive been using it for 2 days, and it seems that the battery just lasts about half a day, on playing 1 to 3 songs in intervals of 1-2 hours. Whats wrong with my ipod?

Your nano would really have nothing to do with it at that point. It is really something between iTunes and whatever server out there on the internet that it is trying to connect to for the update.
Try posting this one in the iTunes forum, they might have a solution for you.
i

I bought the CD of iWork's and have installed pages from it - to use version in Lion do I have to buy the app?? If I do, do I have to delete the other pages??

I bought the CD of iWork's and have installed pages from it - to use version in Lion do I have to buy the app?? If I do, do I have to delete the other pages??

All you need to do is run Software Update to make sure you have the iWork 9.1 update. It will update your existing installation of the three applications. If you're not running the latest versions & Software Update says your software is up to date, make sure the applications are where the installer initially put them. The updaters are very picky. If the location is not where the updater is programmed to look or if the folder doesn't have the name the updater looks for, it will not work. The applications cannot be renamed or moved. Even if you think you'll never need all three of the applications, you cannot delete any. They must be in the iWork '09 folder in Applications. That iWork folder must be named iWork '09. If it doesn't have the '09 Software Update won't find them & the updaters won't work.

How can I force the use on a specific application when I am in the Downloads window?

I have Vista and Firefox 3.6.15
when I open an email attachment it goes to the intended application but when I click on the downloaded file in Downloads it invokes OpenOffice and then it displays:
"Move background page assignment
The loading of password-encrypted Microsoft Powerpoint presentationsis n ot supported"
How can I force the use on a specific application when I am in the Downloads window?

Hi Frank!
you should catch your save-event and after saving put the following line:
oMatrix.Columns.Item(4).Cells.Item(lstRowIndex + 1).Click(SAPbouiCOM.BoCellClickType.ct_Regular);
that's it!

Does OS installed through boot camp or in virtual machine has access and full control of the peripherals like native OS X Lion?

I am planning to buy new PC for my faculty needs and this time I am thinking to buy Apple laptop like Mac book Pro 13" or so ( I owe already IPhone and Ipad 2)
To make final decision I need few information . These are:
1. May I use Boot Camp or similar utility software to install Windows 7 OS next to OS X Lion, or use some kind of virtual box software to create virtual machines with diverse guest OS in them like Windows , Linux etc.?
2. Does OS installed through Boot camp or in virtual machine has access and full control of the peripherals like native OS X Lion?
3. May I use the same disk partitions to access to the files regardless if I am using Windows 7 or OS X Lion operating system?
4. Is there full compatibility between Microsoft Office under OS X Lion and Windows 7 M. Office?
5. What is general user experience with OS X Lion operating system comparing to Windows 7?
Thanks for sharing your experience with me.
Adnan S

adnans wrote:
I am planning to buy new PC for my faculty needs and this time I am thinking to buy Apple laptop like Mac book Pro 13" or so ( I owe already IPhone and Ipad 2)
To make final decision I need few information . These are:
1. May I use Boot Camp or similar utility software to install Windows 7 OS next to OS X Lion, or use some kind of virtual box software to create virtual machines with diverse guest OS in them like Windows , Linux etc.?
2. Does OS installed through Boot camp or in virtual machine has access and full control of the peripherals like native OS X Lion?
3. May I use the same disk partitions to access to the files regardless if I am using Windows 7 or OS X Lion operating system?
4. Is there full compatibility between Microsoft Office under OS X Lion and Windows 7 M. Office?
5. What is general user experience with OS X Lion operating system comparing to Windows 7?
Thanks for sharing your experience with me.
Adnan S
1. Yes. You can install Windows 7 natively using Boot Camp Assistant or you can install Windows 7 in a virtual machine using Parallels, Fusion, or VirtualBox
2. If installed using Boot Camp Assistant Windows 7 uses all your computer's resources just as OSx does. If installed using a VM Windows 7 will share the computer's resources with OSx.
3. A Boot Camp partition is separate from the OSx partition. The VMs allow sharing of files across partitions since both OS are running at the same time.
4. No, not 100%.
5. Too broad a question. Be specific about what feature you are asking about or search the Internet for comparisons. I use both and find they both work well.

I bought a used macbook pro from a friend. Software updates are available, but when I try to update, the computer asks for apple id and will only accept the former owner´s. How can I connect my macbook to my apple id?

I bought a used macbook pro from a friend. Software updates are available, but when I try to update, the computer asks for apple id and will only accept the former owner´s. How can I connect my macbook to my apple id?

The first thing you should do after acquiring a used computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model. Look it up on this page to see what version was originally installed.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind.
If the machine shipped with OS X 10.6, you need the gray installation discs that came with it. If you don't have the discs, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, it should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
Once booted from the disc or in Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, buy it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.

Error in installing of Windows 7 with the use of DVD-RW SATA and HD SATA on the motherboard M2N-VM HDMI

Similar Messages

Maybe you are looking for