Error in installing patch 2414946

i am trying to install oracle 9ias 9.0.2.0.1 infrastructure on redhat linux kernal 2.4.20.8
which is hanging while installation. as per the installation manual i am trying to load binutils-2.11.90.0.8-13.i386.rpm which i downloaded from otn site. the binutils which is already existing is binutils-2.13.90.0.18-9
when i am executing this command
# rp -Uvh --force binutils-2.11.90.0.8-13.i386.rpm i am getting this error
error:failed dependencies
binutils >= 2.12.90.0.7-1 is needed by installed compat-gcc_7.3-2.96.118
binutils >= 2.12.90.0.7-1 is neede by installed gcc-3.2.2-5
can anybody help me

Hi,
As Akash G says, would you please let us know the complete error message or provide a screenshot? It will help
us to go further.
In addition, would you please let me confirm whether install the Windows Server 2008 R2 Service Pack 1 via
Windows Update, or download the installation package and then install manually?
Please refer to the following article and check if can help you to solve this issue.
The error 0X80070490(Element not found) when you are installing a service pack or update
http://blogs.technet.com/b/asiasupp/archive/2011/06/20/the-error-0x80070490-element-not-found-when-you-are-installing-a-service-pack-or-update.aspx
By the way, you can also install the Service Pack 1 in
Clean Boot mode manually. Then please check if install successfully.
Hope this helps.
Best regards,
Justin Gu

Similar Messages

Error in installing patch 9.0.1.4. "Exception in Thread "main"

Hi to all....
Want to ask a problem regarding installing patch Oracle database patch 9.0.1.4.
Previously, i got problems in installing other patch. The solution i got is to install the below patch.
They suggested that i have to install Patch 3038037.
and when I read the ReadMe of Patch 3038037, it stated
2 Preinstallation Requirements
The following list is the preinstallation requirements for this patch set:
Ensure that Oracle database patch 9.0.1.4 is applied to database instances
before applying the Oracle9iAS version 9.0.2.3 patch to infrastructure
instances.
So, in this case, i have to install "Oracle database patch 9.0.1.4" first
before i can install "Patch 3038037"
So, currently, i am trying to install the Oracle database patch 9.0.1.4...got error that are
1) Tried to run runInstaller in Disk1
./runInstaller: Command not found
2)The runInstaller in Disk1 actually will run runInstaller in folder "Disk1/install/solaris"..
but when i run it, it gaves me
"Exception in Thread "main" java.lang.NoClassDefFoundError:/ "
Have any ideas or experience?
Regards,
Rushdan.

try execute: export LD_ASSUME_KERNEL=2.4.1 before you run ./runInstaller
Btw try look at http://www.puschitz.com for installation guide.

OC4J error after installing patch 9.0.2.2

Hello, after installing patch 9.0.2.2 and trying to access the rwservlet I get this error
java.lang.UnsatisfiedLinkError: no rwu90 in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1349)
at java.lang.Runtime.loadLibrary0(Runtime.java:749)
at java.lang.System.loadLibrary(System.java:820)
at oracle.reports.util.Environment.<init>(Unknown Source)
at oracle.reports.server.RWServer.startServer(Unknown Source)
at oracle.reports.server.RWServer.run(Unknown Source)
at java.lang.Thread.run(Thread.java:484)
here is what my startinst.sh script looks like
/u01/app/oracle/product/9idev/jdk/bin/java -Dorg.omg.CORBA.ORBClass=com.inprise.vbroker.orb.ORB -Dorg.omg.CORBA.ORBSingletonClass=com.inprise.vbroker.orb.ORB -Doracle.security.jazn.config=/u01/app/oracle/product/9idev/j2ee/Oracle9iDS/config/jazn.xml -Doracle.home=/u01/app/oracle/product/9idev -DORACLE_HOME=/u01/app/oracle/product/9idev -jar /u01/app/oracle/product/9idev/j2ee/home/oc4j.jar -userThreads -config /u01/app/oracle/product/9idev/j2ee/Oracle9iDS/config/server.xml >/u01/app/oracle/product/9idev/j2ee/Oracle9iDS/log/stdout.log &
It was working fine on 9.0.2.0 I could run reports and forms off the web. I can access the HTTP OC4J server ok, just cant run any reports or forms. Please help. I changed no files after the patch.

correction, i can run the test web form, its the report servlet that doesnt work.

Error when installing patch 5983191 during SOA install

Installing SOA Suite 10.1.3.1 with 11g database (11.1.0.6)
Following instructions in note 465159.1 (Known Issues #2) during SOA install.
OPatch fails with:
MISSING_COMPONENT : oracle.j2ee, 10.1.3.1.0
This Oracle Home does not have components/versions required by the patch.
'opatch lsinventory -detail' reports OracleAS J2EE version as 10.1.3.0.0
Please advise.
Edited by: Alan3 on Dec 8, 2008 3:33 PM
BTW, this is on Oracle Enterprise Linux R5...

I gave this a shot not really expecting it to work.
I used OPatch version 1.0.0.0.60 and still get the same error.
I didn't expect it to work because in patch 5983191 the actions file (etc/config/actions) has the j2ee version requirement specified as 10.1.3.1.0.
Here's the contents:
<oneoff_actions>
<oracle.j2ee version="10.1.3.1.0" opt_req="R">
<copy name="wsil-install.xml" path="%ORACLE_HOME%/webservices/lib" file_name="webservices/lib/wsil-install.xml"/>
</oracle.j2ee>
</oneoff_actions>
The SOA install includes j2ee version 10.1.3.0.0 NOT 10.1.3.1.0.
Patch 5983191 is incompatible with this SOA install.
What next?
Is there a j2ee upgrade patch that I can install BEFORE installing 5983191? If so, it's not in the documentation...

Error while installing patches

I installed Sneak Preview (sp9) and tried to use sdm to ins ltall patches..
There are errors coming up .. I tried to inst sp12 patches i think...
WHat all i should do to check the errors?
should i install sp 10 sp 11 b4 going for sp12?
How can i trouble shoot?

Hi,
Check the logfiles of SDM under C:\usr\sap\<SID>\<instance>\SDM\program\log
Look there from the files which are created today and search for relavent errors.
Regards,
Praveen Gudapati

Error "get disk space file error" to install patch p158 to FM 7.2

I have Adobe FM 7.2 with the Patch B144 on Windows 7 x64 and when I try to install the new patch AdobeFrameMaker7_2p158Patcher.exe I get the error "get disk space file error" and the window freeze.

> I have Adobe FM 7.2 with the Patch B144 on Windows 7 x64 and ...
I'm surprised that FM7 even runs native in Win7. I would expect various random problems during FM ops, and a complete inability to reliably use the Acrobat/Distiller5 that came with FM7 (although a later version of Acrobat/Distiller, separately installed, might work, esp. if using a Print-to-Ps-and-Distill workflow).
You need to install FM7 inside a virtual machine. There are several solutions (e.g. Virtual Box) for that, some of which require that the CPU have hardware virtualization. Most AMD chips do. It's often fused-off, however, on low end Intel chips (just because you didn't pay enough).
I've built a Win7 Pro64 PC, and run FM7 in XP Mode (a virtual machine that is a complete instance of Windows XP/32, and not to be confused with Compatibility Mode). XP Mode is a free download from Microsoft, still available, but only for Windows 7 Enterprise, Professional and Ultimate (not Basic, Home or not-so-Premium). Note: XPM is not supported on Windows 8, 8.1 or 10. You'll need a 3rd-party VM for that (and you'll probably have to install your own copy of XP in any 3rd party VM).
If your chip is AMD, there's a hotfix patch (KB 2519949 as I recall) you need to install before you do anything else about XPM. This patch is not included in any of the 200+ Windows Updates that a virtualized XP wants you to install, in several waves (yes, this takes a while).
And from a related discussion:
>> Microsoft no longer support WinXP, does it a risk to use it?
After you install XP in the VM, and apply all 200+ Windows Updates, and install the apps you need:
disable the VM's networking capability*
or at the very least never use a browser inside the VM
if possible, let the AV software in the host OS access the VM's virtual drive
MS is going to EOL Windows 7 in 2015Q2 as well.
* For some apps, the networking would need to be on periodically for license validation.

OPatch error when installing Patch #5059238

System Info: Windows 7 64-bit
DB/Client version: Oracle 10g - 32 bit version
Background: everything works fine with this Oracle installation except when I try to connect to Oracle DB using ADODB connection string I get "Cannot Open Connection" error. Apparently this is due to the fact that the application from which I run the ADODB command is under "C:\Program Files (x86)" and due to the parentheses the error occurs . After some research, I found that patch #5059238 resolves this issue and so I downloaded it and tried to install it using the OPatch utility.
ORACLE_HOME: C:\Oracle\product\10.2.0\client_1
JAVA_HOME: C:\Program Files (x86)\Java\jre6
Path: ;C:\oracle\product\10.2.0\client_1;C:\Program Files (x86)\Java\jre6;C:\oracle\product\10.2.0\client_1\OPatch\jlib\opatch.jar;C:\oracle\product\10.2.0\client_1\OPatch\jlib\opatchprereq.jar;C:\oracle\product\10.2.0\client_1\OPatch\jlib\opatchutil.jar;C:\oracle\product\10.2.0\client_1\OPatch
Now on running the "opatch apply" or "opatch lsinventory" from C:\5059238 I get the following error :
Invoking OPatch 10.2.0.1.0
Oracle interim Patch Installer version 10.2.0.1.0
Copyright (c) 2005, Oracle Corporation. All rights reserved..
java.lang.NullPointerException
at oracle.sysman.oii.oiix.OiixPathOps.concatPath(OiixPathOps.java:553)
at oracle.opatch.OPatch.setupEnvironment(OPatch.java:227)
at oracle.opatch.OPatch.main(OPatch.java:502)
OPatch failed with error code = 255
Please let me know if anyone has any idea what's going on here and if you have any solutions.
Thanks in advance!!
-Pratik Nagar

>
Yes, I was aware of the incompatibility issue but I downloaded the 11g R2 client for x64 bit and it doesn't install at all. On clicking the setup.exe, it opens a cmd window and then it closes and nothing happens
>
Did you open an SR with Support when you ran into the issue ? Is yours a client-only install ?
>
Also, our DBs are 10g so I am not sure 11g client will let me access 10g DBs.
>
11g client can access 10gR2 databases - see MOS Doc 207303.1 (Client / Server / Interoperability Support Between Different Oracle Versions)
HTH
Srini

Opatch error when installing patch

Hi,
I just installed 10.2.0 on a HP-UX machine, now i want to apply the latest opatch for 10.2.0.3.
The following error occurs when i try this:
appl/mydb/oracle/product/10.2.0/jre not found
Java could not be located. OPatch cannot proceed!
OPatch returns with error code = 1
Indeed, the /jre dir does not exist.
When i navigate to the patch:
/appl/mydb/oracle/product/10.2.0/OPatch and execute the opatch the same error occurs.
Any ideas?
Thanks in advance,
Charles van den Reek.

Hi Maran,
But we have more packages installed on this server, both packages do not have the JRE directorys but opatch is working over there.
Except this package 'mydb' wich also does not contain the JRE directory/installation gives this specific error.......strange.
Regards,
Charles.

Error Installing patch 6272725 on Windows 2003 server

Hi all,
I am trying to install the RUP3 patch on Windows 2003 server. I am getting the following error when installing patch 6272715 which is required to be installed before installing patch 6141000. If i continue installing patch 6141000 after ignoring this error, i get same error during installation of patch 6141000. Please can any one suggest me what i should do to get rid this error.
AD utilities can support a maximum of 999 workers. Your
current database configuration supports a maximum of 83 workers.
Oracle recommends that you use between 2 and 4 workers.
Enter the number of parallel workers [2] :
AutoPatch will run in parallel mode.
Did not need to apply new applterr.txt.
Applying new applprod.txt (if any)...
Did not need to apply new applprod.txt.
Performing version checking for driver files...
Log and Info File sync point:
Mon Nov 26 2007 12:33:27
AutoPatch found some files which it will not apply.
These files are listed in the AutoPatch informational message file.
Copying driver files into installation area...
No driver files were selected for copying.
Skipping...
ForceCopy driver files into installation area for Specified driver
since no such action is present for this driver file
Screening out files not valid for this installation...
Determining valid on-site files...
Extracting object modules from product libraries...
setEnvAdrelink: Error: Cannot open registry key:
SOFTWARE\ORACLE
aiosp2() Error: failure in usdspn()
Contents of error buffer are:
"usdsop cannot create a new process
Cause: usdsop encountered an error creating a new process. [Reason].
Action: Check that your system had enough resources to start a new process. Cont
act your system administrator to obtain more resou (RE"
An error occurred while extracting files from library.
Continue as if it were successful [No] :
--- Thank You.

Sir,
I am posting the output as told by you.
G:\>which ls
ls: Command not found.
G:\>c:
C:\>ls
'ls' is not recognized as an internal or external command,
operable program or batch file.
C:\>cd e:\cygwin\bin
C:\>e:
E:\cygwin\bin>which ls
ls: Command not found.
E:\cygwin\bin>
I am also posting the output of adadmin utility in which i tried ti relink FND programs
Enter list of products to link ('all' for all products) [all] :
Generate specific executables for each selected product [No] ?
AD Administration can relink your Oracle Applications programs with debug
information. Oracle recommends that you do not relink your programs
with debug information unless asked to do so by Oracle Support Services.
Relink with debug information [No] ?
Relinking selected modules in Application Object Library.
setEnvAdrelink: Error: Cannot open registry key:
SOFTWARE\ORACLE
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 33: a
wk: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 203:
tr: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 534:
cat: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 538:
tr: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 538:
tr: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 538:
tr: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 548:
awk: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 573:
cat: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 575:
rm: command not found
Usage: adrelink force=y [<optional args>] <targets>
or: adrelink force=y [<optional args>] filelist=<file>
where <targets> = { <product module> [<product module>] ... }
and <product module> = "<product> <module name>"
- <product> should be in lower case
- <module name> should exactly match the executable name
Valid <optional args> are:
envfile=adsetenv.sh
Used only by the 'adsetup' script
link_debug=y
Will we link executables with debug or not? Default is 'n'
backup_mode=none
Which executables will we back up when linking with force=y?
Default is 'file'. Meanings are:
- none: do not back up any executables
- all : back up all executables
- file: do what $APPL_TOP/admin/adlinkbk.txt says to do
Type 'adrelink examples' to see some examples of running adrelink.
An error occurred while relinking application programs.
Continue as if it were successful [No] :
It is clear that there is some problem with Cygwin. I have renamed the following executabes after the cygwin installation.
gcc to cc
egrep to grep
gawk to awk
gnumake to make
i have also copied which.exe to "Windows\system32" directory from "cygwin\bin" folder and
Copy LINK.exe to "Windows\system32" directory from "VC98" directory.
Please tell me if there is something wrong with Cygwin installation.

Error when installing 9.0.1.4.0 patch set for the Oracle Database Server.

Hi to all.
Currently, i am trying to install patches for portal server.
The server OS is Sun Solaris 8.
We are using Oracle9iAS.
Now, we are installing 9.0.1.4.0 patch set for the Oracle Database Server.
We managed to install the patch, but have problem with the Post Install Action.
We managed to run
-ALTER SYSTEM ENABLE RESTRICTED SESSION;
-@rdbms/admin/catpatch.sql
-ALTER SYSTEM DISABLE RESTRICTED SESSION;
-CONNECT / AS SYSDBA
-update obj$ set status=5 where type#=29 and owner#!=0;
-commit;
But, when we come to the next command, which is to shutdown, it gives us like
this..
SQL> update obj$ set status=5 where type#=29 and owner#!=0;
1402 rows updated.
SQL> commit;
Commit complete.
SQL> shutdown immediate
Database closed.
Database dismounted.
ORA-00604: error occurred at recursive SQL level 1
ORA-01219: database not open: queries allowed on fixed tables/views only
We tried to startup the database..it gives us this error..
SQL> startup
ORA-01081: cannot start already-running ORACLE - shut it down first
So, we tried to shutdown again..
SQL> shutdown immediate
ORA-01089: immediate shutdown in progress - no operations are permitted
I been informed that this is maybe a Database problem related. Any ideas?
Best Wishes,
Rushdan Md Saad.

Patchsets could be obtained (only) from http://metalink.oracle.com
You need to have valid CSI for access.
P.S: Sorry Werner, I didn't see you post.
Message was edited by:
Ivan Kartik

Photoshop CC2014.2 won't install patch updater. Error code U44M2P7

This is super frustrating. Creative Cloud just sent out a updates to all my software. Photoshop, Indesign, Illustrator, Flash, etc... but it will not install the updates to any of them. I get errors on all of them.
Here's what I've tried
• Uninstalling and reinstalling. The install goes fine till I get to the Patch updater. That's when I get an error on all the software.
• I've logged in as root user and that doesn't work.
• I extracted the update to run manually and still get an errors.
If I try to do the update from the CC app, I get this error:
"Unable to extract the downloaded Files." (U44M1|210)
The error log doesn't really help me. This is the summary
- 1 fatal error(s), 0 error(s)
10/08/14 09:44:47:083 | [INFO] | | OOBE | DE | | | | 1857468 | OSX version: 10.9.5
10/08/14 09:44:47:083 | [INFO] | | OOBE | DE | | | | 1857468 |
10/08/14 09:44:47:083 | [INFO] | | OOBE | DE | | | | 1857468 | ----------- Payload: Adobe Photoshop CC 2014 Core_15.2_AdobePhotoshop15-Core 15.2.0.0 {3CC59EEB-0FCB-4C92-B432-9B03E0318F28} -----------
10/08/14 09:44:47:083 | [INFO] | | OOBE | DE | | | | 1857468 | FATAL: DS003: Installer package might be corrupt. Re-download the installer and try again. (Cannot extract '/Volumes/Adobe Photoshop CC 2014 2/Adobe Photoshop CC 2014/payloads/AdobePhotoshop15-Core-260914050059/AdobePhotoshop15-Core-260914050059.zip' to '/Library/Application Support/Adobe/Installers/adobeTemp/{3CC59EEB-0FCB-4C92-B432-9B03E0318F28}'. Error: )
10/08/14 09:44:47:083 | [INFO] | | OOBE | DE | | | | 1857468 |
10/08/14 09:44:47:083 | [INFO] | | OOBE | DE | | | | 1857468 | Please search the above error string(s) to find when the error occurred.
10/08/14 09:44:47:083 | [INFO] | | OOBE | DE | | | | 1857468 | These errors resulted in installer Exit Code mentioned below.
10/08/14 09:44:47:083 | [INFO] | | OOBE | DE | | | | 1857468 | -------------------------------------------------------------------------------------
10/08/14 09:44:47:083 | [INFO] | | OOBE | DE | | | | 1857468 |
10/08/14 09:44:47:083 | [INFO] | | OOBE | DE | | | | 1857468 | Exit Code: 7 - Unable to complete Silent workflow.
10/08/14 09:44:47:083 | [INFO] | | OOBE | DE | | | | 1857468 | Please see specific errors for troubleshooting. For example, ERROR: DS003 ...
Any insight to help complete this update would be greatly appreciated.

Then please restart your machine and try installing this update again from the Root user account. (http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html)
Please ensure that you have admin priviliges for following folder:
/Library/Application Support/Adobe/Installers
If you still face this problem then please provide us with PS 15.2 installer logs file at
For Mac:
"Library/Logs/Adobe",
This would help us in resolving the issue.
Please mail it to [email protected]
Thanks,
Ashutosh

Errors installing patch 9.2.0.5

Trying to install patch 9.2.0.5 on solaris 64-bit in silent mode using response files and receive the following error when trying to install the OUI supplied with the patch.
Error: <myexisting sid> already exists at <specified oracle_home location> specify another location for HOME1.
If I specify another location the oui is installed, but when I attempt to install the patch I get :
Error: Specified a non-empty directory to install this product. Recommended to specify either an empty or non-existent directory to install this product.
When I specify a empty directory, I get:
Alert: There are no patches that need to be applied.

Hi
What is the version number of the database for what you want to install the patch?
Have you selected the home of the database in the installer?
Ott Karesz
http://www.trendo-kft.hu

Install patch 8333939, error occurs

Dear All,
My customer trying to apply patch 8333939, but error occurs.
Referred
Note 1224313.1: Getting Started with Oracle E-Business Suite Plug-in, Release 4.0 (Doc ID 1224313.1)
when running in the Section 5: Preparing Oracle Enterprise Manager 11g Grid Control
and installing patch 8333939, error occurs:
"the staging area needs oracle universal installer version 11.1.0.7.0 or late"
EBS version: 11.5.10.2
Platform: Linux x86-64
I have following questions:
1. Is this patch need to install on DB or APP?
2. Customer has two OUI home, does he need to upgrade OUI home to 11.1.0.7.0 or later? How? Is there a patch number or something?
[applprod3@ITEEBSTE oui]$ cat oraparam.ini |grep OUI_VERSION
OUI_VERSION=10.1.0.6.0
[applprod3@ITEEBSTE oui]$ pwd
/EBSTEST/PROD3/apps/tech_st/10.1.3/oui
[applprod3@ITEEBSTE oui]$ cat oraparam.ini |grep OUI_VERSION
OUI_VERSION=10.1.0.6.0
[applprod3@ITEEBSTE oui]$ pwd
/EBSTEST/PROD3/apps/tech_st/10.1.2/oui
Thanks,
Jackie

Hussein,
I have a question.
Is this means customer need to execute following steps first
3. Install Oracle Enterprise Manager 11g Grid Control (11.1.0.1.0)
3.1. Install OEM on the OMS server
3.2. Install OEM Agents on the Targets (where EBS is installed)
3.2.1. Targets having the same OS version as the OMS server
3.2.2. Targets having different OS versions as compared to the OMS server
Then, patch 8333939 can be applied successfully?
Because refer to
http://docs.oracle.com/cd/E17559_01/em.111/e18708/T506934T511454.htm
Section "Running Oracle Universal Installer"
It says:
Stop all the Management Services before installing the pack to a Management Service. Management Services will be restarted automatically after the pack has been installed.
Stop the OMS.
$PROMPT> $ORACLE_HOME/bin/emctl stop oms
Note: If your EM Repository (EM Database) is on the same machine, it must be left running. Only OMS and Agent services need to be taken down.
Set the environment variable ORACLE_HOME to ORACLE_HOME of Management Service 11.1.0.1 as shown here:
export ORACLE_HOME=/d1/oracle/em11g/oms11g
Then unzip this patch and install it. Am I right?
My customer's purpose is to install EM on R12, does
Note 1224313.1: Getting Started with Oracle E-Business Suite Plug-in, Release 4.0 (Doc ID 1224313.1)
is the correct note?
Thanks,
Jackie
Edited by: Jackie Han on Sep 3, 2012 8:28 PM

Errors installing patch 111858-01.

I ran 111858-01 patch install, however, keep getting the following
error:
/var/sadm/patch/111858-01/log
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
/opt/temp/itps20beta/imq2.0/SP1/111858-01/SUNWjqapi/install/checkinstall:
/opt/temp/itps20beta/imq2.0/SP1/111858-01/SUNWjqapi/install/checkinstall:
cannot open
pkgadd: ERROR: checkinstall script did not complete successfully
Dryrun complete.
No changes were made to the system.
I have verified (./jmqbroker -v) that the patch has not been installed.
How do I resolve this error?

Looks like the system thinks the patch is already installed.
Can you try uninstalling the patch and installing the patch again?
As root,
./backoutpatch 111858-01

Error installing patch 9654983 on HPUX RAC 11.2

Hello,
I'm doing a new installation of a *11.2.0.1 GRID* on a HPUX Itanium 11.31 but having the following error when aplying patch 9654983:
Running make for target client_sharedlib
Make failed to invoke "/usr/ccs/bin/make -f *ins_net_client.mk* client_sharedlib ORACLE_HOME=/u01/app/oracle/product/crs"....'rm: /u01/app/oracle/product/crs/lib/libclntsh.so.11.1 not removed. Permission denied
genclntsh: Failed to remove /u01/app/oracle/product/crs/lib/libclntsh.so.11.1
and then again
Make failed to invoke "/usr/ccs/bin/make -f *ins_rdbms.mk* client_sharedlib ORACLE_HOME=/u01/app/oracle/product/crs"....'rm: /u01/app/oracle/product/crs/lib/libclntsh.so.11.1 not removed. Permission denied
genclntsh: Failed to remove /u01/app/oracle/product/crs/lib/libclntsh.so.11.1
at the end I get the following errors:
Re-link fails on target "client_sharedlib".
Re-link fails on target "client_sharedlib".
Can someone help me out?

Hi,
Are you sure that services this ORACLE_HOME were down.
In RAC environment, choose one of the patch installation methods provided by OPatch (rolling, all node, or minimum downtime), and shutdown instances and listeners as appropriate for the installation method selected.
This PSU patch is rolling RAC installable.
genclntsh: Failed to remove /u01/app/oracle/product/crs/lib/libclntsh.so.11.1This usually happens when you try to remove a lib that is still loaded in memory.
On AIX sometimes the libs are stuck in memory (after kill process), and I use the command slibclean to clear the references lib invalidated. But in HP UX I do not know if you have this command or similar.
Regards,
Levi Pereira
Please close your thread when you get the solution to your problem. 
Mark the replies answered "helpful" answer or "correct" answer that will help others with same problem. 
Thanks for doing your part to make this community as valuable as possible for everyone!

Error in installing patch 2414946

Similar Messages

Maybe you are looking for