Error in instance schedulling

Hello experts,
   I have a web intelligence report that I have copied to test a change of dimension. Since that I copied it, the instance schedulling of both Web I Reports(the original and the copy) are failed. The error message is "The Web Intelligence server cannot be reached. Contact your Business Objects administrator (Error: RWI 00236)".  What I can do to restaure the this Web Intelligence Report instance schedulling ?
Thanks,
David

Hello PadawanGirl,
No, it happens only with this report. All the other reports are executing normally, even reports that use the same universe.
Regards,
David.

Similar Messages

  • Trap syntax error in trap-schedule.dat alert; possibly SMC related

    Receiving many ID xxxxxx daemon.alert events every hour. The message is:
    [ID xxxxxx daemon.alert] syslog Nov 10 14:00:10 trap syntax error in trap-schedule.dat(200) at token '???'
    followed immediately (same timestamp) with:
    [ID yyyyyy daemon.alert] syslog Nov 10 14:00:10 trap *** aborting execution ***
    I coudn't find anything on the web specifically for this message but several hits that looked similar seemed to indicate that this might be a problem in SMC. If it is not I apologize in advance.
    System is an ldom:
    Solaris 10;
    SunOS clsol8 5.10 Generic_127127-11 sun4v sparc SUNW,T5140
    Current situation is:
    # /opt/SUNWsymon/sbin/es-validate
    This script will help you in validation of Sun (TM) Management Center.
    Validation Tool Version : 4.0
    Host name : clsol8
    Number of CPUs : 24
    Platform : SUNW,T5140
    Operating System : SunOS 5.10
    Memory size : 2048 Megabytes
    Swap space : 595480k used, 3727296k available
    JAVA VERSION : "1.5.0_14"
    Sun Management Center Production Environment Installation.
    Following layers are installed : SERVER, AGENT, CONSOLE
    Installation location : /opt/SUNWsymon
    Sun Management Center installation status:
    PRODUCT : Production Environment
    INSTALLATION STATUS : Setup.
    DATABASE SETUP : Setup.
    COMPLETELY INSTALLED PACKAGES : SUNWescom,SUNWesbui,SUNWesbuh,SUNWenesi,
    : SUNWesdb,SUNWesagt,SUNWessrv,SUNWessa,
    : SUNWesjp,SUNWesaxp,SUNWesse,SUNWesclt,
    : SUNWesjrm,SUNWmeta,SUNWenesf,SUNWesmdr,
    : SUNWesgui,SUNWesweb,SUNWessvc,SUNWesasc,
    : SUNWescix,SUNWsuagt,SUNWsusrv,SUNWesval,
    : SUNWesmc,SUNWessms,SUNWessdv,SUNWescdv,
    : SUNWlgsmc,SUNWeslac,SUNWesodbc,SUNWesmib,
    : SUNWesken,SUNWesmod,SUNWesae,SUNWesaem,
    : SUNWesmcp,SUNWesafm,SUNWescon,SUNWsucon,
    : SUNWescli,SUNWesclb
    <NOTE: I had to cut out a bunch of installed components to hit character limit>
    Sun Management Center Add-Ons and Versions:
    PRODUCT VERSION
    Production Environment 4.0
    Advanced System Monitoring 4.0_Build15
    Sun Fire Entry-Level Midrange S 3.5-v6
    Service Availability Manager 4.0_Build15
    Performance Reporting Manager 4.0_Build15
    Solaris Container Manager 4.0_Build15
    Sun Fire Midrange Systems Platf 3.5-v6
    System Reliability Manager 4.0_Build15
    Sun Management Center Integrati 4.0_Build15
    Workgroup Server 3.6
    Generic X86/X64 Config Reader 4.0_Build15
    Sun Management Center Patch installation details:
    No Sun Management Center patch is installed.
    Sun Management Center disk-space consumption:
    PRODUCT APPROXIMATE DISK SPACE CONSUMED
    Production Environment : 54452 kB
    Advanced System Monitoring : 2391 kB
    Sun Fire Entry-Level Midrange S : 1738 kB
    Service Availability Manager : 1838 kB
    Performance Reporting Manager : 3371 kB
    Solaris Container Manager : 3688 kB
    Sun Fire Midrange Systems Platf : 3270 kB
    System Reliability Manager : 970 kB
    Sun Management Center Integrati : 540 kB
    Workgroup Server : 3707 kB
    Generic X86/X64 Config Reader : 608 kB
    TOTAL : 76573 kB
    Database is located at : /var/opt/SUNWsymon/db/data/SunMC
    Free space available on this partition is : 6493142 kB
    Following locales are installed :
    Information about upgrade from old versions is not available.
    Sun Management Center Ports:
    SUNMC COMPONENT PORT_ID
    agent service 1161
    trap service 162
    event service 163
    topology service 164
    cfgserver service 165
    cstservice service 167
    metadata service 168
    platform service 166
    grouping service 5600
    rmi service 2099
    webserver_HTTP service 8080
    webserver_HTTPS service 8443
    You are currently running SNMPDX.
    Sun Management Center Server Hosts definitions in domain-config.x:
    SUNMC COMPONENT SERVER_HOST
    agent service clsol8
    trap service clsol8
    event service clsol8
    topology service clsol8
    cfgserver service clsol8
    cstservice service clsol8
    metadata service clsol8
    platform service clsol8
    Sun Management Center Processes:
    SUNMC SERVICE STATUS
    Java Server Running.
    Database services Not Running.
    Grouping service Running.
    Event-handler service Running.
    Topology service Not Running.
    Trap-handler service Not Running.
    Configuration service Running.
    CST service Not Running.
    Metadata Services Running.
    Hardware service Not Running.
    Web server Running.
    Sun Management Center Agent Running.
    Platform Agent Not Running.
    Privilege level for Sun Management Center users :
    CATEGORY USERS
    esadm : smcadmin
    esdomadm : smcadmin
    esops :
    ALL USERS : smcadmin
    server is local host
    Web server package is installed correctly.
    Web Server is up and responding.
    Web Server servlet engine is up and responding.
    I have also read that patching SMC has caused problems for some people so I don't really want to try that until I get some feedback.

    Hi Mike,
    Tried your suggestion to rename the .dat and let SMC recreate it but I can't get the SMC database service to launch. So it looks like I am having trouble with the database. Any suggestions?
    To back up, you nailed it with the loss of power - we lost both power supplies on a Sunday night with no warning and nothing in /var/adm/messages (since we send them to a loghost.) It was determined that chips within each power supply in the T5140 failed. So we replaced both power supplies and fired the server up. That is when we started getting the trap errors and only those two errors on clsol8.
    I did check http://sun.com/msg/SMF-8000-KS but am not sure how that helps.
    What I tried:
    On clsol8 as root:
    # cd /opt/SUNWsymon/sbin
    # ls
    {db-memconfig.sh   es-details        es-imagetool      es-setup
    db-start          es-device         es-inst           es-start
    db-stop           es-dt             es-keys.sh        es-stop
    es-apps           es-gui-imagetool  es-lic            es-tool
    es-backup         es-guiinst        es-load-default   es-trapdest
    es-chelp          es-guisetup       es-makeagent      es-uninst
    es-cli            es-guistart       es-platform       es-validate
    es-common.sh      es-guistop        es-restore        esmultiip
    es-config         es-guiuninst      es-run            ports.config}
    # ./es-stop -A
    {Stopping metadata component
    Stopping cfgserver component
    Stopping topology component
    Stopping event component
    Stopping grouping service
    Stopping trap component
    Stopping java server
    Stopping webserver
    Stopping agent component
    Stopping platform component}
    <attempting Mike's solution suggestion>
    # cd /var/opt/SUNWsymon/cfg
    # ls
    trap-schedule.dat
    # mv trap-schedule.dat trap-schedule.dat.maybeCorrupted
    # /opt/SUNWsymon/sbin/es-start -Ac
    {Some of the SunMC services are in maintenace state.
    Please check the corresponding SMF service log in /var/svc/log directory.
    Please disable the services in maintenance state and re-start the services again.}
    # svcs -vx
    svc:/application/management/sunmcdatabase:default (SunMC database service)
    State: maintenance since November 6, 2009 3:50:51 PM CST
    Reason: Start method exited with $SMF_EXIT_ERR_FATAL.
    See: http://sun.com/msg/SMF-8000-KS
    See: /var/svc/log/application-management-sunmcdatabase:default.log
    Impact: This service is not running.
    svc:/application/management/sunmcwebserver:default (SunMC webserver service)
    State: maintenance since November 12, 2009 2:45:50 PM CST
    Reason: Start method failed repeatedly, last exited with status 103.
    See: http://sun.com/msg/SMF-8000-KS
    See: /var/svc/log/application-management-sunmcwebserver:default.log
    Impact: This service is not running.}
    # svcadm disable sunmcdatabase
    # svcadm disable sunmcwebserver
    # svcs -vx
    # svcadm enable sunmcdatabase
    # svcadm enable sunmcwebserver
    # /opt/SUNWsymon/sbin/es-start -Ac
    {Failed to successfully perform Database Startup.}
    # svcs -vx
    svc:/application/management/sunmcdatabase:default (SunMC database service)
    State: maintenance since November 12, 2009 2:49:50 PM CST
    Reason: Start method exited with $SMF_EXIT_ERR_FATAL.
    See: http://sun.com/msg/SMF-8000-KS
    See: /var/svc/log/application-management-sunmcdatabase:default.log
    Impact: This service is not running.}
    # cd /
    # svcadm disable sunmcdatabase
    # shutdown -y -g0 -i6
    (after reboot, I logged into clsol8 and su'd to root)
    # svcs -xv
    svc:/application/management/sunmcdatabase:default (SunMC database service)
    State: disabled since November 12, 2009 3:02:11 PM CST
    Reason: Disabled by an administrator.
    See: http://sun.com/msg/SMF-8000-05
    Impact: 1 dependent service is not running:
    svc:/application/management/sunmctopology:default}
    # svcadm enable sunmcdatabase
    # svcadm disable sunmcdatabase
    # svcadm clear sunmcdatabase
    svcadm: Instance "svc:/application/management/sunmcdatabase:default" is not in a maintenance or degraded state.
    # svcadm refresh sunmcdatabase
    # svcadm enable sunmcdatabase
    # svcs -xv
    svc:/application/management/sunmcdatabase:default (SunMC database service)
    State: offline since November 12, 2009 3:09:25 PM CST
    Reason: Start method is running.
    See: http://sun.com/msg/SMF-8000-C4
    See: /var/svc/log/application-management-sunmcdatabase:default.log
    Impact: 1 dependent service is not running:
    svc:/application/management/sunmctopology:default
    # svcs -xv
    svc:/application/management/sunmcdatabase:default (SunMC database service)
    State: maintenance since November 12, 2009 3:10:30 PM CST
    Reason: Start method exited with $SMF_EXIT_ERR_FATAL.
    See: http://sun.com/msg/SMF-8000-KS
    See: /var/svc/log/application-management-sunmcdatabase:default.log
    Impact: 1 dependent service is not running:
    svc:/application/management/sunmctopology:default
    [ Nov 12 15:08:37 Leaving maintenance because disable requested. ]
    [ Nov 12 15:08:37 Disabled. ]
    [ Nov 12 15:09:07 Rereading configuration. ]
    [ Nov 12 15:09:25 Enabled. ]
    [ Nov 12 15:09:25 Executing start method ("/lib/svc/method/es-svc.sh start datab
    ase") ]
    execution of verifyDatabaseUp failed
    exiting........................
    [ Nov 12 15:10:30 Method "start" exited with status 95 ]

  • Job submission failed : error occurred while scheduling the job. org.quartz.objectalreadyexistsexception: unable to store job with name

    Experts,
    Please help me out here,Am facing this issue while scheduling a job in BIPublisher.
    job submission failed : error occurred while scheduling the job. org.quartz.objectalreadyexistsexception: unable to store job with name
    Thanks,

    You are probably installing on a hardened machine.
    The "installation guide" says that if you are doing so, you need to create a file named libx11.so.4 and update your LD_LIBRARY_PATH (see http://docs.iplanet.com/docs/manuals/messaging/ims52/ig/unix/overview.htm)but:
    1- the library name is libX11.so.4 and
    2- for jre a common file is not enough, you need to install SUNWxwplt at least. This will install the library on /usr/openwin/lib.
    You can check the results running <server-root>/bin/base/jre/bin/jre
    Hope that helps and sorry about my poor english.

  • Error occurred while scheduling the job.

    Hi Tim,
    I am getting following error when ever I use any other option than 'Run Immediately' I am getting following error.
    Please help me.
    oracle.apps.xdo.servlet.scheduler.ProcessingException: Error occurred while scheduling the job.
    at oracle.apps.xdo.servlet.ui.scheduler.SchedulerServlet.getDateObject(SchedulerServlet.java:2202)
    at oracle.apps.xdo.servlet.ui.scheduler.SchedulerServlet.scheduleJob(SchedulerServlet.java:1603)
    at oracle.apps.xdo.servlet.ui.scheduler.SchedulerServlet.doPost(SchedulerServlet.java:289)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
    at oracle.apps.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:80)
    at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
    at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
    at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
    at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
    at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
    at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
    at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
    at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:595)
    Thanks,
    Vara

    Hi Vara
    You have the scheduler set up now right? Can you schedule for the future ? Im assuming not but worth asking :)
    Are there any other errors in the stack. Upon starting the server does the Quartz piece initialize OK - you'll see it when starting the j2ee container
    Regards
    Tim
    http://blogs.oracle.com/xmlpublisher

  • Error when re-scheduling a report in WebI XI 3.1 SP2

    Hi,
    Im running BOE XI3.1 SP2 and I get that error when re-scheduling a report in WebI. We have just recently patched the system to SP2.
    Any idea what this error relates to?
    Thanks
    Frank

    Sorry first part of this thread was removed.
    The problem description is as follow:
    On BOE XI 3.1 SP2, when re-scheduling a BO report which sends an Excel attachment to an email destination, users receive the error "An error has occurred: $Proxy4".
    It seems to be hit and miss but is more consistent when sending to multiple (comma-separated) recipients in the 'TO' field. I also noticed that if you select CACHING then a "$Proxy5" type error is returned.
    I understand that this bug was supposed to be fixed in XI3.1 SP2 but I'm already running SP2.
    Anyone seen this?
    Thanks
    Frank
    Edited by: Frank Goneau on Oct 20, 2009 4:16 PM

  • IDoc failed with the error massaeg "Instance of object type could not be ch

    Hi All
    I am getting IDoc failed with the error massaeg "Instance of object type could not be changed"
    Message type :PORDCR
    Basic type : PORDCR05
    Message no. BAPI003
    Status : 51
    All POs are get uploaded in SAP during Cut over activities only.
    Please suggest on this.It will be a great help.
    Thanks
    Ajit

    Hi
    After uploading POs into SAP we are changing quantity and value in PO in Legacy system, and for this all IDocs are failed, subsequently these changes are not triggering to ECC.
    Please help
    Thanks
    Ajit

  • Error creating instances in Business Process Workspace

    i have the following error:
    oracle.bpm.web.exception.WapiOperationException: Error creating instance for target process Serv_M/Proj_V!76.0*/EV.
    Caused by: BPM-70204
    Exception
    exception.70204.type: error
    exception.70204.severity: 2
    exception.70204.name: Error creating process instance.
    exception.70204.description: Error creating instance for target process Serv_M/Proj_V!76.0*/EV.
    exception.70204.fix: Verify server log to find the problem cause.
    at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:205)
    at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:345)
    at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
    at oracle.bpm.services.instancemanagement.ejb.InstanceManagementServiceBean_sqa2w0_IInstanceManagementServiceRemoteImpl_1036_WLStub.createProcessInstanceTask(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
    at $Proxy413.createProcessInstanceTask(Unknown Source)
    at oracle.bpm.papi.ora.util.ApplicationExecution11G.beginExecution(ApplicationExecution11G.java:50)
    ... 101 more
    Caused by: ORABPEL-02023
    Cannot activate block.
    failure to activate the block "EV" for the instance "30037"; exception reported is: .
    This error contained the exceptions thrown by the underlying routing system.
    Contact Oracle Support Services. Provide the error message, the composite source and the exception trace in the log files (with logging level set to debug mode).
    Help me please!
    Regards

    Hi Chris
    If you are trying to create a LOV and use that as a parameter, then you need to create LOV as Dynamic Cascading values. Once created then you can use that LOV in the Crystal Reports.    
    This is the best way to get dynamic cascading prompts in Crystal reports.
    Please refer to Business View Admin guide for more information.
    Hope this helps!!
    Regards
    Sourashree

  • ASE instance not available *** ERROR:ASE instance possibly left running when system went down(system crash?). Notify Database Administrator

    Hi Gurus,
    I made some changes in rz10 for client copy like:
    icm/host_name_full [email protected]
    login/accept_sso2_ticket 1
    login/create_sso2_ticket 2
    icm/server_port_1
    PROT=HTTPS,PORT=443$$,PROCTIMEOUT=600,TIMEOUT=600
    icm/server_port_0
    PROT=HTTP,PORT=80$$,PROCTIMEOUT=600,TIMEOUT=600
    login/no_automatic_user_sapstar 0
    After to make changes effective, i stopsap & startsap.
    But unfortunately db is not coming up. I checked startdb.log it showing
    error as " ASE instance not available
    *** ERROR:ASE instance possibly left running when system
    went down(system crash?).
    Notify Database Administrator."
    Please help us to resolve this issue, i have also added startdb.log for
    your reference.
    Regards,
    Piyush

    Hi Piyush,
    Did you solved this issue.
    We are facing the same issue and only this thread is there in SCN for this issue.
    If you solved this issue,Kindly share the solution.
    Thanks and Regards,
    Mathan A

  • The Question about mess "Customizing Error in Work Schedule Rule ..."

    Dear all,
    I run the Start-Payroll  and I getting an error " Customizing Error In WSR for that Personal Number"
    I configuration all of Time Management with start date is 01.01.2000 and when I run Payroll on Payroll period is 01/2000 with start date is 01.01.2000 to 31.01.2000 for Employees hiring on 01.01.2000 then I have an error " Customizing error in work schedule rule .. .. ... ..".
    But I can run the payroll period on 02/2000 with start date is 01.02.2000 to 29.02.2000 for Employees hiring on 01.02.2000.  form 02/2000 it is okies.
    Please help me  solve about my problem
    Thank for your answers
    Regds
    Huyen Nguyen

    Customizing Error in Work Schedule Rule
    where are u getting this error
    if it  is PY  log
    Check GENPS this error will come under this Function
    it is the combination of
    ur Holiday calendar
    Employee Sub Group
    Personal Sub area Grouping
    and ur Daily work Schedule Rule
    Check the Start dats an end dates fo all the above Settings along with their Groupings in table V_T508A

  • Error: The instance completed without consuming all of its messages.

    Hi,
    I have following scenario.
    I am processing messages in Sequential way. I have two Orchestration, Orch1 has transformation logic and Orch2 has Sequential processing logic. Orch2 is directly binded with MsgBox and receives the messages persisted by the Orch1 based on correlating property.
    I need to sort the message based on ReceivedFileName(which is date time stamp). So In the Orch2, I am receiving all the messages within certain delay say 1min, adding to a List, sorting all the messages based on Filename and then sending to destination location one by one.
    Now I am getting one error in Orch2 when the frequency is high. The error says "The instance completed without consuming all of its messages. The instance and its unconsumed messages have been suspended. " I believe the cause could be, when the Orch2 sending one batch of sorted messages then it might have received new messages meanwhile. And so, as the sorted messages are sent the Orch2 instance completes but there are new messages still attached to this Orch instance and thus its suspending.
    I am totally not able to figure out how can I avoid this error. Also I don't want to terminate the suspended message(loss of message :().
    Thanks in advanceAjeet Kumar

    Thanks for Reply.
    I tried with this also, but the problem is even if I decide any end point for Convoy, then also I can't stop the Orchestration to not to subscribe new messages during its life time. I will explain this in detail
    We can separately divide the Orch2(Order Delivery Orch) functionality into 3 parts and considering time lags.
    1) Orch2 receives all the convoy msg from MsgBox say it took time t1(equal to the delay)
    2) Not it will sort the messages based on FileName...say this operation took time t2
    3) Now I am sending the sorted messages one by one to destination location. Say it took time t3 to send all the messages.
    Now, if during the time delays (T2+T3) if any new message comes into Convoy orch, then the instance will suspend with the error "The instance completed without consuming all of its messages. The instance and its unconsumed messages have been suspended. ".
    So is there any way to make sure that Convoy Orch does not receive any new msg during time T2+T3.Ajeet Kumar

  • I preordered an album in error that is scheduled to download next week.  How do I stop it from downloading?  I no longer want to purchase it.

    I preordered an album in error that is scheduled to download next week.  How do I stop it from downloading?  I no longer want to purchase it.

    Downloading a pre-ordered item
    When a pre-order item becomes available, you will receive an email letting you know your pre-order is available for download.
    If you've enabled iTunes to automatically download prepurchased content, then your pre-order content may already be downloaded to your library. If not, simply click the download link provided within your email notification, and your pre-order content will begin to download. Alternatively you can use the "Check for Available Downloads" feature in iTunes on your computer by choosing Store > Check for Available Downloads to begin downloading your pre-order.
    I would contact iTunes if clicking on the link did not results in it downloading to your iPod.
    Apple - Support - iTunes - Contact Us

  • WDA Error : An instance of popup view already exists in the application

    Dear Experts,
    I have used a popup in my WDA application which gets opened on the click of the button. Whenever the application is launched for the first time and when I click on the button to display the pop up I get the error "An instance of popup view already exists in the application"; when I close the application, relaunch it once again and click on the button to open the popup, it works fine. What would be the reason for this behaviour?
    My piece of code is as follows,
    try.
          lo_api_component = wd_comp_controller->wd_get_api( ).
          lo_window_manager = lo_api_component->get_window_manager( ).
                        CALL METHOD lo_window_manager->CREATE_WINDOW
                          EXPORTING
                            WINDOW_NAME       =  'POP_UP_QOH'
                            TITLE             = 'Stock Overview'
                            BUTTON_KIND       = IF_WD_WINDOW=>CO_BUTTONS_OK
                           MESSAGE_TYPE      = IF_WD_WINDOW=>CO_MSG_TYPE_NONE
                           CLOSE_IN_ANY_CASE = ABAP_TRUE
                          RECEIVING
                            WINDOW            = LO_WINDOW
                        CALL METHOD LO_WINDOW->OPEN
                 CATCH CX_WDR_RT_EXCEPTION.
    ENDTRY.
    Kindly please help to resolve the issue.
    Warm Regards,
    Kanthimathi

    Hi Viji,
    I now changed my piece of code as follows,
    if lo_window is initial.
    lo_api_component = wd_comp_controller->wd_get_api( ).
          lo_window_manager = lo_api_component->get_window_manager( ).
                        CALL METHOD lo_window_manager->CREATE_WINDOW
                          EXPORTING
                           MODAL             = ABAP_FALSE
                            WINDOW_NAME       =  'POP_UP_QOH'
                            TITLE             = 'Stock Overview'
                           CLOSE_BUTTON      =
                            BUTTON_KIND       = IF_WD_WINDOW=>CO_BUTTONS_OK
                           MESSAGE_TYPE      = IF_WD_WINDOW=>CO_MSG_TYPE_NONE
                           CLOSE_IN_ANY_CASE = ABAP_TRUE
                          RECEIVING
                            WINDOW            = LO_WINDOW
                        CALL METHOD LO_WINDOW->OPEN
    endif.                       
    but still facing the same problem. By the way what does the message type argument mean here?
    Regards,
    Kanthimathi

  • Customizing error in Work Schedule Rule

    Dear Consultant,
    One of the employee left on 25th of a month. His termination process was run from 26th. Thereafter his Time sheet was uploaded upto 25th. The system accepts his attendance upto 24th but for 25th it gives error as "Customizing Error in Work Schedule Rule XXXXX". When his Personal work schedule was checked it shows expected working hours as 8. Then why it does not accept the attendance through time sheet?
    Nothing can be wrong with WS Rule as it is still working fine for all others. Also when the time sheet is uploaded first & then the employee is terminated, it works fine. then why time sheet gives error only for the last day?
    Regards
    Bindumadhav

    Hi
    Pls check the action infotype 0000 for him
    normally the if person is going to releive on say 25th ,then we have to give the leaving action date as 26 th as per SAP
    Scenario.
    consider his doj is 01.05.2006
    if u done the leaving action on 26th by mentioning the date 25.09.2009
    sap close him by 24th
    and the record stored as below
    01.05.2006  to 24.09.2009
    delete the action and perform w.e.f 26 th  then it will take as below
    01.05.2006 to 25.09.2009
    then u can upload time events
    hope it will solve
    with regards
    partha
    keep sharing and learning

  • Customizing Error in Work Schedule

    Hello Experts,
    I am getting the following error when running time evaluation, "Customizing error in work schedule rule 4 w1 52 REG1/2UP", 2 personnel numbers are being rejected.  These two employees work during the summer.  We reorg them to put them on leave, Inactive,  so no acurals occur during the time they are not on the payroll.  When these employees return, we reorg them back to Active. This time when we brought them back to active, we get the above error during time eval.  I do not have  a work schedule rule 4 w1 52 REG 1/2UP in table T508a.  I do have work schedule rules 1 and 2 with w1 52 REG 1/2UP. These two emmployees  have work schedule rule 1 w1 52 REG 1/2UP.  I have changed the payroll status for retro calculation and I've checked that the employees do have IT0007.  Does anyone know where to look to see how the system is coming up with work scheudule rule 4 and how to resolve this issue?  Any suggestions are appreciated and points will be awarded to a solution provider.  Thanks.

    I have ran into this many times at work.  Generally for us, this happens when an employee is moved into a new personnel area on infotype 1, where they require a different work schedule rule.  However, infotype 7 was not updated for that same validity period and they have the incorrect work schedule.
    Example:
    Pers Area HYDZ
    requires work schedule ZIND
    Pers Area PSCC
    requires work schedule ZDTA
    The employee is in pers area PSCC until 12/31/9999 (with ZDTA on infotype 7).  They transfer the employee into HYDZ effective 6/1/2008.  However, infotype 7 was not updated and still has ZDTA.  As a result, the customizing work schedule error appears during time evaluation.  We have to create the infotype 7 record effective 6/1/2008 with the ZIND work schedule rule.
    John.

  • Customizing error in work schedule rule 2 D2 40 RRTHOLR2

    Hello Experts,
    While simulating payroll , I am getting this error.
    Customizing error in work schedule rule 2 D2 40 RRTHOLR2
    esgrouping - 2
    Holiday Calender - D2
    Personnel Sub area grouping - 40
    WSR - RRTHOLR2
    my dws are starting with 1.4.2004
    my pws are starting with 1.4.2004
    my calender is between 2004-2015
    and created Work schedule for 2004-2015
    still getting the same error
    Will you please help me out to solve this ?
    Thanks And regards
    Jaydeep Jadhav

    Hi All,
    I too faced the same type of error. Below are the steps for the solution.
    1. The error comes due to retro run with incorrect workschedule rule in IT0007.
    2. You can check table  V_T508A or V_001P_ALL to view the complete groupings of your personnel area/subarea,workschedule rule, Holiday cal,
    3. Copy the existing record of IT0007>give the retro effective period as start date and enter the end date>select the populated workschedule rule from the drop down option-->save the record.
    4. Run the psyroll in simulation mode and check the status.
    Hope it may help you..
    Best Regards
    Satya

Maybe you are looking for