Error in Integradted Planning - Input Ready Query Design

Dear Gurus,
I am facing an error while designeing input ready query. I have created a query on Aggr. Level which is on Multi Provider.
I have 2 key figs. In my second key fig. I have restricted Planning Infor priovider with Plan version for version info object , Calender Year/month , and other info object of version , I have selected Variable for input.
When I am going to Planning tab of this key figure in change mode option I have selected Data Can be changed using user entries or Planning Functions. But my other options i.e. Disaggrgation and Type of Distriburtion are in the freezed state. That I can't select any of them. The system is giving Red hightlights and the highlight is showing error " Not Supported by Server"
Can you please advice me where is the problem ?
Regards,
B. Rajesh

Hi Rajesh,
This like would help you to resolve the issue
http://aiokeh.wdf.sap.corp:1080/SAPIKS2/contentShow.sap?_SCLASS=IWB_STRUCT&_SLOIO=C574D0123CD5DD44A8B271D6DADE8490&TMP_IWB_TASK=PREVIEW2&RELEASE=690&LANGUAGE=EN&_SEQNUM=253&_LOIO=4727759655EA6560E10000000A11466F&_CLASS=IWB_EXTHLP
Thanks and Regards,
Sateesh pasodi

Similar Messages

Integrated Planning input ready query

Hi All,
I am new to integrated planning. I have created an input ready query with key figure "revenue" ready to input.
When I run the query, I can change the revenue figures, but the save button is greyed out.
Is this an authorization issue or am I missing something?
Any help is appreciated. Thanks!

Hello Payal,
I sugguest to read the documentation on help.sap.com about BI Planning; the documation contains an example how to create a planning application with BEx Analyzer.
I did not mention what UI you are using, BEx Analyzer oder BEx Web Analyzer. In both cases there is no default save button, you have to create it, e.g. in the design mode of BEx Analayzer oder for the BEx Web Analyzer in the WAD (Web Application Designer).
Regards,
Gregor

WAD template for INPUT READY Query

Gurus,
I have created a real time cube and did al steps correctly in terms of Input ready Query Design. ( Set the Query to Change Mode , changed Key figures to accept Data from Users and Plan functions).
I get the out put in read only mode . I mean the key figures does not allow me to plan .
I am clueless as I seem to do all correclty. We are on latest Service pack .
I discovered we are uisng the webtemplate 0ANALYSIS_PATTERN . DOes this need to be changed?
ANy suggestions please ....

Hi,
Suggest check if you are able to enter data using the input enabled query in BEx just to make sure that the query is correctly developed.

Syntax error when creating input-ready query

Hi,
When creating an input-ready query, I set the key-figure to 'Data can be changed by user entries or Planning Functions' in the Planning Properties in the query designer.
When I execute the query, I get the following error:
Syntax Error in : CL_RSR_RRK0_KEYFIGURE
In se24, the class has a syntax error in its Constructor method.
The error is not occuring when I change the Planning property to 'Data Cannot be changed' or 'Data can be changed via Planning Functions'.
Has anyone encountered such an error. If yes, how to proceed further?
Anything do with the the ABAP Patches. Currently I am in Patch13.
Thanks,
Balaji

Hi,
Plz apply the notes 1042924 and 1043103.After appling the notes regenerate the
query.
This should solve the error.
Regards,
Srikanth.

Error on a input ready query

Hello SAP Gurus,
Can anybody advise on the following error of an input ready query?
u2022 Error reading the data of InfoProvider ZIPNA002 - Notification Number DBMAN 305
u2022 Error while reading data; navigation is possible - Notification Number BRAIN 289
u2022 System error in program CL_RSPLS_PLAN_DATA and form GETREQ_FREE-01- (see long text ) - Notification Number BRAIN 299
The query is based on an aggregation level (integrated planning)
The filter has a navigation attribute variable for the characteristic 0WBS_ELEMT__0PROJECT Project definition and in the line a list of 0WBS_ELEMT PEP elements should be displayed for planning.
We are with support package SAPKW70017 SAP NetWeaver BI 7.0
Thanks and best regards,
Patrícia

Hi Patrícia
first check in transaction SNOTE that there are no inconsistent notes (no lightning icons). If not, tell your basis team to fix it.
Then check in transaction SPAU that there are no inconsistent objects (everything must be green). If not, tell your basis team to fix it.
Next implement all notes that are listed as "side effects" in note SAP note 1101187 .
Finally, generate the plan query again in transaction RSRT. b
Regards,
Marc
SAP NetWeaver RIG

Copy Input Ready Query Variables into Planning Sequence

Hi all,
       We have the following scenario. We developed a model using Web Template. The model has an input ready query and a Panning sequence associated with it. Both of them using the same Planning Filter that has a input variable for Profit Center (say ZPCTR). If I run this model in Portal the planning sequence automatically takes the variable given for the input ready query and the sequence runs without any problem.
       We were asked to implement the same model in BEx as the users felt more comfortable using Excel when working on this model. When we assinged the planning sequence to a button and after we run the input ready query and then click on the button to run the planning sequence, we get an error message saying "You have to enter values before you execute". The Planning sequence is not taking the values we enter for the input ready query automatically.
      I read through the forums on the same issue and saw that most of them reported about the same but could not find a conclusive answer. I tried the following options.
1) Enter the expected values in the excel in one location and gave the address in the "Command Range" of the planning sequence. Still it does not work.
2) Tried SAP suggested method as given in http://help.sap.com/saphelp_nw70/helpdata/en/45/e301089d574a88e10000000a155369/frameset.htm It also does not work
3) Couple of them suggested to use a different variable for Profit Center in the filter of Planning sequence (say ZPCTR_EXIT) and populate this variable. I wrote an exit for this variable and populated a fixed value say '100' into it. The sequence runs as expected. But I do not want use a constant, I want to store the value entered in ZPCTR into ZPCTR_EXIT.
   when I use the regular logic "LOOP AT i_t_var_range INTO var_inpiut WHERE vnam = 'ZPCTR' ", it does not work. the exit variable works if I store some constant values, not variable values.
    Can you please suggest how can I work with this. Is there any table from which I can read the profit center value the users enters into the Exit variable.
Thanks for your time,
Ram.

This error generally comes when we use some user input variable in the sequence which is not restricted in the query. Even though you are using the same filter for both planning sequence and query, check the planning functions inside the sequence which might read an user input variable which is not available in the query so that it is not appearing in the query selection screen. Like in FOX reading a variable using VARV or a variable restricted in the field for condition of planning function etc. Make sure that all the variables used in the sequence (planning functions) are kept in query restrictions if they are of type ready for user input so that they will appear in the selection screen.

Input ready query error

Dear all,
New to planning world, i have done everything told in the book in query designer to have an input ready query.
When i run that query in query designer, what should i expect?i have no data in the cube, so it says no data found .
However i am trying to make query have blank fields that i can edit with planning data.
any help ?
thanks

You can search for this too :-). Also, for new questions, it is generally better to open new threads.
For saving data, buttons need to be created with relevant commands. If you are executing the query in BI analyser (excel), you can also right click on the query and select 'save data'.

IP: input-ready query shows data in Load mode but not in Plan mode

Hello experts,
we're currently experiencing a very strange issue regarding an input-ready query which consists of a single lead column (read from the cube) and an input-ready plan column. The issue is as follows:
When the cube is in Load mode the lead column shows its data perfectly. However, when switching to Plan mode the data is not shown.
The cube is indexed by a BIA which may be part of the problem.
We're on BW 7.00 SP 21. I've read that this may be related to the OLAP cache, but haven't been able to find any notes relevant for 7.00 SP 21.
Thanks in advance for any suggestions.
Regards, Dirk

Hi Dirk,
I think that the problem comes from the cache used in the plan buffer query. Delete the cache via RSRCACHE. The query name is
IC/!!1IC if you have a query on an aggregation level on an InfoCube IC
MPRO/!!1MPRO if you have a query on an aggregation level on a multiprovider MPRO or directly on the multiprovider MPRO
You might search for note using 'cache' and component pattern BW-BEX-OT*, e.g. 1408959, 1528191, 1560036.
Regards,
Gregor

How to calculate and save planning data in bex input-ready query using keyfigures for calculation from different infoproviders

Hi Dear All,
We have two real time infocubes and two aggregation levels based on these cubes in one multiprovider
first cube1 is like
char1| char2| keyfig_coefficient(single value for each combination of char1 and char2)
same aggregation level1
(we have input query to fill coefficients by one responsible user)
second cube2 is like
char1| char2| keyfig_quantity| keyfig_result
same aggregation level2
Input ready query should be like (for all other users of different org units)
char1|char2|keyfig_coeff| keyfig_quant(for input) | keyfig_result = keyfig_coeff*keyfig_quant(calculated value, should be saved to cube2)
And we don't have pregenerated lines in cube2, users have to add new lines themselves by wad.
Question is, what is the optimal (easiest) way to make calculation and save result data to cube2 where keyfigures for calculation should be used from different infoproviders. I need just a hint.
Appreciate any help.
Nadya.

I found decision, agregation levels sould be based on multiprovider, not included.

Input Ready Query using Analysis grid in WAD - Integrated Planning

While running the input ready query in analyzer, I am able to key in values.
In WAD, I get the following message and there is no new row.
"No new row or column added because not all characteristics have a key cell"
Waiting for response on fly!!!
Thanks in advance,
Siva

Hi Siva,
New lines in web applications modeled by WAD only work with SP09 and note 984601.
Please assign points if this helps.
Regards,
Anil

Can not change data in Input Ready Query

All,
I have created an input ready query on an aggreagation level which has one transactional cube underlying it however, after run the query I am unable to change data in the cells even though I get a warning message saying query is ready for input
Note:
1. The underlying realtime cube is in "Planning Mode:Loading not allowed" state in rsa1
2. I tried including all characteristics so that the record can be uniquely identified at that aggregation level).
3. I am not using any characteristic restrictions
4. I have not set any data slices
5. I have set the property for Planning "Start query in Change Mode"
6. I have set the 'Key Figure' Planning Properties to "Can be changed Manually or via Planning Functions" for the key figures
7. I do not have currency/unit in row/column.
8. There are any locks occurring
Any pointers welcome.
Thanks,
Milind

Hi Milind,
Was wondering how was your problem solved. I get the same message when I run the query in web from query designer and in bex analyzer the cells are not updated with the changes that I make.
I am hitting my head against the wall to figure what could be the problem as my plan query is simply based on aggregation level created directlty upon the real time info cube.
Have cross checked all the points that you mentioned in this post but I cells do not change.
There should be some way around to solve this problem.
Thanks

How to create an Input Ready Query in Bex Excel with no transact data

Hi
We created a query where we want the user to put in NEW LINES. This query has in general no data when user starts planning.
We have 2 front-ends for this, Bex Web and Excel. Both shows initial 'no data available
BexWeb': Implementing the command set_data_entry_mode we get all the relevant columns for the input
Excel: Command set_data_entry_mode or set_input_mode does not allow the users to insert new lines. Still error message pops up 'no data available'
Do you have a solution for that ?
Regards,
Thomas

Hi Gregor,
In the note 1149346 that you have mentioned, it says -
You must start the input-ready query in change mode.
BEx Analyzer: In the properties of the analysis grid, the switch
"Suppress new rows" must not be set. Furthermore,
the switch "Allow entry of plant values"
must be set in the local query properties.
I have not seen this setting Allow entry of plant values in a query - can you tell what is refers to?

****************Input ready Query**************in IP.

Hi guru's
I am bit new to IP,
I have the Fspecks now, but in that what i observed that some of the fileds are requires to be manual entry in the reports.
Based on the input upto now i under stood that need to go for input ready query.I have pasted my idea below.please go thru and found something wrong please........ alert me.
Now i need to one basic cube...i.e for actuals,.
Need to create one more cube ( Real time ) with key figures which are requires manual entry in the report.
Now i will create one multi - provide and will create aggregation level on this,...and will run the query......
in the planning i can change the required key figures into manual enty///////.
Please correct me if i am wrong ....other wise please guide me how to move forwad.
Thanks in advance ......
Subhratha mukargeee.

You are going in the right direction. basically, the endusers will be able to make references of actual data to do their planning. Having an aggregation level on top of this multiprovider will enable the users to compare actuals/plan data. Try to keep the aggregation levels as small as possible i.e only include the necessary infobjects.
After you setup the aggregation level, it acts like an infoprovider so create the input ready query using the designer. For a query to be input ready, start by including all the char and keyfigures in the row and cols respectivley.Set the property for keyfigures as data can be changed using manual entries.
Anyways, welcome to the world of IP. Best of luck.

Data from an Input ready query back into BW

Hi All,
One of the reports I am working on should allow users to write comments for each characteristic value (i.e in each row). I have toyed with different ways of doing it, but based on our company specific requirements, I have finally arrived at this design - Users enter comments in a column in an input ready query and the data is sent back to a real time cube.
However, I have never done this kind of stuff before. Can anyone please give me a step by step procedure of how to achieve this?
The most informative answer will be rewarded with the highest points.
Thank you.

I had already tried the document property in BI, but unfortunately it did not seem to work. This is the error I got when I did a right click on a characteristic value -> Documents -> Create new comment
u201CCannot determine the KM folder for storing documents with these types of propertiesu201D
u201CError while launching new document dialogu201D
http://img184.imageshack.us/img184/6505/docproperror1wg8.jpg
When I asked my basis team about this error, they had no clue what it meant and they thought it had to do with KM, and currently we do not have KM enabled in BI portal. Thats the reason why I had look for an alternative. However, I am pretty sure its not a KM issue because I believe "Characteristic is a Document Property" is a standard out-of-box BI property.
Do you know what that means and how to fix it?

Input-Ready Query

Hey everybody,
I have a problem with designing my input-ready query.
I know that I have to restrict the data that every record can uniquely be identified.
If I define a very strict filter, I can enter plan data.
But if I add only one characteristic to the columns area and execute the query, I get the message:
"The selection on the characteristic XY is to complex for the default value".
What does that mean?
Why can´t I add characteristics to the columns ares?
Thanks in advance,
Philipp

hi,
Beacuse as the message says its too complex.
If you have 2000 characteristics values or for eg. 0material,
and if you try to take it in columns imagine what will happen.
for that reason if you want to use characteristics in column
you need to restrict it.
as we usally do with time characteristics which are widely
used in columns to restrict the key figs.
hope it helps

Error in Integradted Planning - Input Ready Query Design

Similar Messages

Maybe you are looking for