Error in integration engine prosessing

Hi
I am doing proxy to fille interface for testing purpose in RWB in integration engine i test message tab i have given proper entries and send the message.In SXMB_MONI intially status of flag is green i have registered the queues in sxmb_adm then status has changed to red i opened the message it is showing as follow.
In Moni in place of receiver service interface it is showing sender service interface.But i have configured correctly
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">INTERFACE_REGISTRATION_ERROR</SAP:Code>
<SAP:P1>ifmmessif</SAP:P1>
<SAP:P2>SI_PROXY_SENDER</SAP:P2>
<SAP:P3>urn:SESA:PROXY:FILE</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>No implementing class registered for the interface (ABAP interface, request message SI_PROXY_SENDER, request message, namespace urn:SESA:PROXY:FILE)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Regards
Praveen

My problem was solved my R3 RFC destination was not pointing to client of integration engine.I have corrected the same my issue was solved
Regards
Praveen

Similar Messages

Error in integration Engine(indicating red color)

Hi all,
I am getting error in integration engine monitoring it shows red in color.
In that below PING status its telling like Unable to log on to system with PIRWBUSER.
Post installation has done in 001 client by default.the user is also existijng in that client its a service user.Anyone can help me out to resolve this issue.
Regards
Vijay Kumar G

Please check if the system XXX exists user PIRWBUSER.
Check the exchange profile properly configured or not and also check for the Authorizations for the said user.
See the below links also
Demo application: "You cannot log on to system .... with user XIRWBUSER
RWB error: javax.ejb.CreateException XIRWBUSER cannot log
How to get rid of the error message on RWB?

Error in integration Engine

Hi All,
In integration Engine im getting error as "Exception occurred during XSLT mapping of the application".
when i tried to test the mapping its showing the warning as "javax.xml.transform.TransformerException: com.sap.engine.lib.xml.util.NestedException: Could not execute operation on Java Object. -> java.lang.reflect.InvocationTargetException at "
Please help me reagrding this issue to proceed further!!!

Hi,
Can u please explain the problem little detail...
Are u getting this error in SXMB_MONI??
If yes then can u copy the source payload and check it in the Message Mapping once??
If problem is coming from mapping... try to analyze.. else u can put now vtz exactly the prblm is..
Babu

RWB: System error in INtegration Engine, Adapter engine OK

HI All,
I have an interface converting IDOCS from R/3 into Text files and sending them to Legacy system via XI.
Data is flowing correctly, however I can see some errors in the RWB. (SXI_MONITOR is clean, no errors)
Upon investigation, I found that its has transmitted the file correctly, however this INtegration system error is shown.
To explain further:
BUssiness syst name of R/3 = BS_R/3
Bussiness syst name of legacy = BS_LEGACY
Bussiness service used = BS_SERV_R3
Message INterface = MIIA_R/3
So in RWB:
Message from BS_R3 to BS_LEGACY are SUCCSSFUL (Adapter and Integration engine , both success)
Message from BS_SERV_R3 to MIIA_R/3 (Adapter engine Sucess but INtegration engine = System Error)
Is it that the messages are going fine and the acknowledgements are failing or something like that.
Appreciate your guidance on same.
Many thanks
Shirin

Hi Shirin
I got a confusion understanding above
Scenario is IDOC R/3 -> PI -> Text Files -> PI -> Legacy system ?
if you have BS_SERV_R3 to MIIA_R/3 implemented for acknowledgments then definitely thats the error. But please share how you are getting ACK to understand and resolve error.
Thanks
Gaurav

Proxy Runtime errors in Integration Engines at RWB

Hi Experts,
We have configured the point to point configuration scenario in our landscape. I have two ABAP systems exchanges data using PI. I have configured both the ABAP systems as Application Systems and Corresponding Integration server as my PI system.
In RWB of PI I can see both these systems as proxy run time under Integration Engines, but are in error status.
Path to the same is Component Monitoring>Components>Integration Engines (here I can my systems as Proxy Runtime BSAB200, Proxy Runtime BSID200).
When run the test got the below error.
Can the SLD be reached? RFC destination LCRSAPRFC does not exist
Does the Integration Engine know the business system?
Are roles in SXMS_CONF_ITEMS and SLD consistent?
Why do we need to create the RFC destination again when we select the related integration server as PI.
Can any one throw some light whey are these errors are occured.
Thanks,
Chinna

Can the SLD be reached? RFC destination LCRSAPRFC does not exist
Reached to SLD but not to exchange profile.
Does the Integration Engine know the business system?
Yes.
Why do we need to create the RFC destination again when we select the related integration server as PI.
A central SLD scenario involves a central SLD, but not a central exchange profile.
The exchange profile used is always the one on the Integration Server the
application system connects to the exchange profile using the SM59 destination
LCRSAPRFC.
Regards
Pothana

Error Type In Integration Engine

Hi All,
Please tell me what type of error/exception can occur in the integration engine? Is it only System Exception that can occur or can Application Exception also occur?
Also please tell me what do you mean by the term SALERT.
Thanks,
Abhishek.

hi abhishek,
I. Errors in Integration Engine
a) qRFC Errors
Often in asynchronous scenarios where inbound queues are used, the queues are set to SYSFAIL status and all the messages in the inbound queue are stuck (not processed). Depending on the status of XI processing queues, we can reset a queueu2019s status and trigger processing of messages.
Manual Resend of messages: Use transaction SMQR or SMQ2 to reset the status of queues. As you can see in the following figure, the queue has been marked with a status sysfail.
To be able to initiate processing of messages stuck in the queue, make sure to set following IS configuration parameter
MONITOR QRFC_RESTART_ALLOWED to value 1
For automatic qRfc failure recovery, schedule the report RSQIWKEX to run periodically. This report enables automatically resets the queues.
b) tRFC Errors
Like qRFC errors one can either manually or automatically initiated processing of messages hanged tRFC calls.
Manual Resend of messages: Use transaction SM58 and check through the list. If necessary, start hanging tRFC calls
under the Edit menu by choosing Execute LUWs.
For automatic tRfC failure recover, schedule the report RSARFCEX for periodic execution.
II. Errors in Adapter Engine
Till now we have seen how to resubmit/restart message that failed in Integration Engine. One a message makes it from Integration Engine to Adapter Engine, the message is flagged as checked in Integration Engine. The status of the message in Adapter engine does not effect the processed state in Integration Engine. Now if this message was asynchronous, XI will by default try to restart the message 3 times at intervals of 5 minutes before the status of the message is changed from Waiting to System Error .
regards
kummari

Communication error when sending PI message from Integration Engine to AE

Hi Experts,
we currently installed and configured PI 7.3 system. Even I run post installation PI configuration several times, we are still facing error when Integration engine sends message to messaging system. ( my scenario: I send test message to IE directly, avoiding AE )...
It might look easy: but even adding PIISUSER full authorization and system restart, the result is the same. I don't know if it could have connection but I also get HTTP 200 instead of HTTP 500 when testing INTEGRATION_DIRECTORY_HMI destination.
Thanks for any help.
<Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP" />
- 
<Trace level="1" type="T">error reading SAP_XIAdapterFramework from SLD</Trace>
<Trace level="1" type="T">error reading SAP_XIAdapterFramework from SLD</Trace>
<Trace level="1" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET):</Trace>
<Trace level="1" type="T">URL = http://xxx:xxxx/MessagingSystem/receive/AFW/XI</Trace>
<Trace level="1" type="T">User = PIISUSER</Trace>
<Trace level="1" type="T">Cached =</Trace>
<Trace level="1" type="T">Security: Basic authentication</Trace>
<Trace level="1" type="T">Serializing message object...</Trace>
<Trace level="1" type="T">Tuning - AFW_MAXREQUESTCONTENTLENGTH 2000000000</Trace>
<Trace level="1" type="T">HTTP Multipart document length: 2948</Trace>
<Trace level="1" type="T">Timeout: 0</Trace>
<Trace level="1" type="T">HTTP-client: request sent</Trace>
<Trace level="1" type="T">HTTP-client: response received</Trace>
<Trace level="1" type="T">HTTP-client: status code = 401</Trace>
<Trace level="1" type="System_Error">Authorization error while sending by HTTP (error code: 401 , error text: Unauthorized)</Trace>
</Trace>

Hi,
So this password change in Exchange Profile + su01 transaction + system restart didn't help.
I increase trace level, and this is even more detailed log in pipeline step Call Adapter.
We also find out that when message arrive to IE we have in java log three entries:
LOGIN.FAILED
User: N/A
IP Address: xxx
Authentication Stack: sap.com/com.sap.aii.af.ms.app*MessagingSystem
Login Module Flag Initialize Login Commit Abort Details
1. com.sap.security.core.server.jaas.EvaluateAssertionTicketLoginModule SUFFICIENT ok exception true Received no SAP Authentication Assertion Ticket.
2. com.sap.security.core.server.jaas.EvaluateTicketLoginModule SUFFICIENT ok false true
3. com.sap.engine.services.security.server.jaas.BasicPasswordLoginModule REQUISITE ok exception true Authentication did not succeed.
This log is logged under J2EE_GUEST User.
LOGIN.OK
User: SLD_CL_PIQ
IP Address: xxx
Authentication Stack: sap.com/com.sap.lcr*sld
LOGIN.OK
User: SLD_CL_PIQ
IP Address: xxx
Authentication Stack: sap.com/com.sap.lcr*sld
Last two logs are logged by SLD_CL_PIQ user.
Thanks for any help!

- <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="3" type="T">Channel for adapter engine: File</Trace>
<Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP" />
- 
<Trace level="2" type="T">no values in cache (no lock found) - start reading from SLD</Trace>
<Trace level="1" type="T">error reading SAP_XIAdapterFramework from SLD</Trace>
<Trace level="2" type="T">Adapter Framework(s) found</Trace>
<Trace level="2" type="T">Service Port(s) found - take first one</Trace>
<Trace level="2" type="T">URL found</Trace>
<Trace level="2" type="T">no values in cache (lock found) - start reading from SLD</Trace>
<Trace level="1" type="T">error reading SAP_XIAdapterFramework from SLD</Trace>
<Trace level="2" type="T">Adapter Framework(s) found</Trace>
<Trace level="2" type="T">Service Port(s) found - take first one</Trace>
<Trace level="2" type="T">URL found</Trace>
<Trace level="1" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET):</Trace>
<Trace level="1" type="T">URL = http://xxx/MessagingSystem/receive/AFW/XI</Trace>
<Trace level="1" type="T">User = PIISUSERA</Trace>
<Trace level="1" type="T">Cached =</Trace>
<Trace level="3" type="T">Creating HTTP-client</Trace>
<Trace level="3" type="T">HTTP-client: creation finished</Trace>
<Trace level="1" type="T">Security: Basic authentication</Trace>
<Trace level="1" type="T">Serializing message object...</Trace>
<Trace level="1" type="T">Tuning - AFW_MAXREQUESTCONTENTLENGTH 2000000000</Trace>
<Trace level="1" type="T">HTTP Multipart document length: 2941</Trace>
<Trace level="3" type="T">HTTP-client: sending http-request...</Trace>
<Trace level="1" type="T">Timeout: 0</Trace>
<Trace level="1" type="T">HTTP-client: request sent</Trace>
<Trace level="3" type="T">HTTP-client: request sent</Trace>
<Trace level="3" type="T">HTTP-client: Receiving http-response...</Trace>
<Trace level="1" type="T">HTTP-client: response received</Trace>
<Trace level="3" type="T">HTTP-client: checking status code...</Trace>
<Trace level="1" type="T">HTTP-client: status code = 401</Trace>
<Trace level="3" type="System_Error">Authorization error while sending by HTTP (error code: 401 , error text: Unauthorized)</Trace>
</Trace>
</Trace>

ALERT not getting triggered for messages in error in adapter engine

Hi All,
I am doing the same scenario where I have created two Alert category Alert_cat1 and Alert_cat2, both are similar but one i have created for error in integration engine(Alert_cat1 ) and other for adapter engine(Alert_cat2).
Now for Alert_cat1 i have created a rule and in the setting "where did the error occur" I have given no restriction.
Now for Alert_cat2,as discussed in the above blog I have created many rule each for various adapter.
I have tested it, above mentioned configuration is working for message mapping error (sxmb_moni)
but not for any error in adapter engine for messages in waiting or system erroe status.
Kindly suggest where I am going wrong.
Regards
Shefali S

HI,
please refer this below blog:
Does Alerts work for Integrated configurations scenario??
thanks,

Error while testing message from Integration Engine.

Hi,
Trying to send message to Integration engine from RWB, using test mesage tab in Integration engine.
I pasted the payload(IDOC payload) , entered sender service, interface name and namespace and also username and password. Selected quality of servie as Exactly once.
While sending the message getting the following error - "Error while sending".
What could be possible reasons for this error.
Thanks.

Hi,
Please check the following possibilities:
1. Make sure you have selected integration Engine oprtion and not the adapter engine.
2. The USERID and password should be correct.
Please let me know if you still face the problem.
Regards,
Shwetambari.

HTTP error 403 from Integration engine

Hello,
Problem a)
While posing data from eSourcing to PI box by HTTP , we are getting HTTPerror 403.
The error message states:
ID: E-Sourcing was unable to publish PROP-00090--2010 to ERP. class java.io.IOException Server returned HTTP response code: 403 for URL:
Problem b)
In another observation the sender file adapter after polling the file is unable to send the message to Integration engine and gives a Connection Time out error. it gives the following error.
Transmitting the message to endpoint http://<Host>:<Port>/sap/xi/engine?type=entry using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error transmitting the message over HTTP. Reason: java.net.ConnectException: Connection timed out: connect.
I believe that both the errors are for common cause and possibly the Integration engine is not accepting HTTP request.
It looks like these error due to security reason, it seems some authorization profile is missing or may be some other issue,kindly help us at that front.
Thanks and Regards,
Satish

Hi Suraj,
Thanks for the update.We had checked the URL before posting this message,it is picking up correct URL with namespoace, UID and PWD.Exact error that we are getting is as follows:
ID: E-Sourcing was unable to publish PROP-00090--2010 to ERP. class java.io.IOException Server returned HTTP response code: 403 for URL: http://MB1ES1025:50200/sap/xi/adapter_plain?namespace=http://frictionless.esource.com/v2.0&interface=MI_ESI_AWARD_PO&service=FCI_TENANT&QOS=BE&sap-user=pisuper&sap-password=sap$29&sap-client=001&sap-language=EN. Please contact your system administrator.
Here all information are correct.We have checked the SLD check, that is also working fine.Also it is not connectivity related issue, as we are able to transmit XML file to E-Sourcing.
It looks like security issue, but what authorization needs tobe given exactly for HTTP call, we need to know or may be some other issue.
Thanks and Regards,
Satish

HTTP error 403 to Integration engine

Hello,
Problem a)
While posing data from eSourcing to PI box by HTTP , we are getting HTTPerror 403.
The error message states:
ID: E-Sourcing was unable to publish PROP-00090--2010 to ERP. class java.io.IOException Server returned HTTP response code: 403 for URL:
Problem b)
In another observation the sender file adapter after polling the file is unable to send the message to Integration engine and gives a Connection Time out error. it gives the following error.
Transmitting the message to endpoint http://<Host>:<Port>/sap/xi/engine?type=entry using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error transmitting the message over HTTP. Reason: java.net.ConnectException: Connection timed out: connect.
I believe that both the errors are for common cause and possibly the Integration engine is not accepting HTTP request.
Please help.
Thanks and Regards,
Himadri
Edited by: Himadri Chakraborty on Feb 9, 2010 3:35 PM

Time Out Error
In order to get rid of it, Your basis person need to play around with follwing three parameters in order to find an appropriate values as per your hardware sizing and requirement......
icm/conn_timeout
icm/keep_alive_timeout
icm/server_port_< n >
How ever, in general SAP recommandation is as follow....
icm/server_port_0 = PROT=HTTP,PORT=1080,TIMEOUT=30,PROCTIMEOUT=600 to allow a maximum processing time of 10 minutes.
Hope this helps !!!
Regards,
J Augastine

Mail-Adapter Integration Engine Error during parsing of SOAP header

Hello,
we use XI with the mail adapter. Most of the messages are processed correctly. But sometimes I get following errors in the J2EE-logviewer:
Transmitting the message to endpoint http://<xi-host>:<http-port>/sap/xi/engine
?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.a
pi.RecoverableException: Received HTTP response code 500 : Error during
parsing of SOAP header.
Failed to transmit message 4e913640-4cc5-11dc-8560-00e000c55366(OUTBOUND)
due to com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP
response code 500 : Error during parsing of SOAP header.
Retries exceded, set message
4e913640-4cc5-11dc-8560-00e000c55366(OUTBOUND) to status NON_DELIVERED.
Has somebody else the same problem and solved it or any idea what the matter could be?
Thanks for your help
Christian

Hi Reddy,
We´ve got the following scenario:
Exchange-Server (is always up)
XI Mail-ReceiverAdapter
I use IMAP4 to access the Outlook-Email-Box
Everything works fine. But some Emails aren´t processed.
I think it´s a problem between adapterframework and the integration engine?
There is no difference between the emails?
If you´ll need further informations ask me?
Thanks

Error In Runtime Workbench (Integration Engine)

Hi All,
I have an issue with the PI Netweaver 7.0 SR3.We change the client from 001 to newclient by following SAP NOTE.
Everything is happening fine except while i use Transaction SXMB_IFR and then Run Time Work Bench in component monitoring Integration Engine is not in Healthy State,Its showing Yellow Signal and a message is like this
Is Web service security available?
Description :Communication error Proxy calls are not permitted on sender or receiver side on the IS (client)
Also Business Process Engine is also Showing Yellow Signal as
Schedule Background Job for Missed Deadlines
    Schedule Background Job for Work Items with Errors
    Schedule Background Job for Event Queue
    Schedule background job for clearing report
    Schedule Background Job for Shared-Memory Update of Container Fa
    Schedule Background Job for Deadline Monitoring
So please suggest how to proceed to fix these issues.
Thanks,
Gagan Deep Kaushal

Hi,
for WS security please have a look at this page (last question)
http://help.sap.com/saphelp_NW04/helpdata/en/a5/1b5342d8a7be30e10000000a155106/content.htm
you can also try my answer from:
Re: RWB Integration Engine status yellow
BTW
this cal stay yellow and it does not mean that XI/PI will not work
Regards,
Michal Krawczyk
Edited by: Michal Krawczyk on Nov 29, 2008 1:11 PM

Generated Proxy Error: System not configured as XI Integration Engine

Dear all,
Using transaction SPROXY I generated a proxy on a Message Interface.
This generated as well a method and the associated class.
When I run it, trying to send data through all this, I get the following error:
System not configured as XI Integration Engine
Here is the model I got on another thread, in order to catch the error text:
DATA: l_sys_exception TYPE REF TO cx_ai_system_fault.
*...proxy call
catch CATCH CX_AI_SYSTEM_FAULT into l_sys_exception.
write: l_sys_exception->errortext.
Anyone has any idea where this error commes from?
I am mostly wondering whether the problem comes from my outbound system or XI configuration?
Thanks a lot, have a nice day!
Isa.

check this thread
https://forums.sdn.sap.com/click.jspa?searchID=2727912&messageID=1877263

Error: System not configured as Integration Engine

Hi ,
I was trying to simulate the following scenario in SAP XI:
HTTP--> SAP XI --> (RFC/BAPI)SAP R/3
Let me clear what i did.
I have to call a BAPI using RFC adapter in XI to display some information on a request of some Http app.
1. I have Imported the RFC BAPI into IR.
2. I have created the XSD files for http Re and res messages.
3. I have created the XSLT mapping programs and put them in a zip file and imported into IR.
4. I have created a Interface mapping and assign the created messages and mapping programs.
5. In ID i have created a Business service for my web application.
6. Receiver determination created in Id and Interface determination and receiver agreement in ID and activated the changes.
7. I have tested the same by sending the request from my web application to xi plain http adapter as follows:
http://grserver:8000/sap/xi/adapter_plain?bs=XIWS_web&namespace=urn%3Axi%3Asap%3Awebapp&interface=HTTP_out&qos=BE
and in the result i have got the following error:
"System not configured as Integration Engine"
but i have tried it many times and some times it gives me correct results but after that the same error ios coming.
so can you tell me what could be wrong in the configuration of XI of what is the solution for this problem.
Reagrds
Gopesh Kumar Agarwal

Hi,
What is the version of XI you are using? If u are usign XI2.0, ur URL is correct. But if you are using XI3.0 then use service=<SENDERSERVICE>instead of
bs=<SENDERSERVICE> parameter in your URL.
bs is replaced by service in XI3.0
Your URL will be http://grserver:8000/sap/xi/adapter_plain?service=XIWS_web&namespace=urn%3Axi%3Asap%3Awebapp&interface=HTTP_out&qos=BE
Hope this helps you.
Cheers,
Siva Maranani.
Message was edited by: siva maranani
Message was edited by: siva maranani

Error in integration engine prosessing

Similar Messages

Maybe you are looking for