Error in Integration of Defect Module of HP QC with SolMan Ehp 1

Hi,
We are using QC version 10 patch 12 and connected with SolMan Ehp 1 for testing.
We are facing a problem in integrating the defect module of QC with Service desk of SolMan.
The required settings are done in SPRO -> SAP Solution Manager -> Scenario-Specific Settings -> Third Party Integration -> SAP Quality Center by HP -> Integration Defect Management.
SPRO -> SAP Solution Manager -> Scenario-Specific Settings -> Third Party Integration -> External Service Desk
We have also implemented the SAP note 1289155.
We are not using the Standard message type SLFN instead we have ZLFN.
See the bellow error message in QC during field maping.
The number of required defect fields in Quality center is different from the number of required support message fields in Application: u201Ceclsh112; WAS; 100u201D. Make sure the number of required fields is equal in both systems before you continue.
Can any one suggest on this.
Thanks in advance.
Praveen

Hi Praveen,
Try this it should solve the issue.
It seems that there is something wrong with your configuartion for the external service desk.
If possible could you remove the external service desk from in
Transaction ICTCONF and redefine it again?
Once you have done that please do the following steps:
- Go to the Solution Manager project
- Open the dialog to connect to a QC project
- Confirm the dialog.
This will update the assignment with all technical details.
You can check the results in the Site Admin. There navigate to the corresponding QC project and check the content of table BLUEPRINTS. There should be exactly 1 entry with the relevant information for the service desk integration (see attached "BLUEPRINTS(QC).doc").
Hope this helps.
Thanks,
Raghavendra.

Similar Messages

  • Error in creation of function module in e.c.c 6.0

    HI GURUS,
    i encountered a problem while creating function module in e.c.c 6.0, the error is 'THE MAIN PROGRAM OF DOES NOT BEGIN WITH "FUNCTION-POOL". kindly help me in solving this issue.

    Hi,
    You need to activate the Function Group.
    GO to Se80 --> Select function group from list box --> press enter --> Select you function group > Right click> Activate.
    Thanks,
    Sriram Ponna.

  • Unknown error calling a RFC Function Module in BODI

    Hi all,
    I am having an issue identifying the error that my batch job in BODI is giving with regards to a RFC function module call in my query. The value returned by the standard parameter 'AL_RFC_RETCODE' are square characters (              ).
    At the completion of the job, the error message 'RFC CallReceive error <Function ZCT_INDSLS_SLS_TRN_INSERT: Invalid request.. Invalid request.>.' is being output.
    Correct me if I'm wrong but the parameter 'AL_RFC_RETCODE' should return standard values as per the techical manual provided to undertand any errors that might occur during a RFC FM call.
    Can anyone help me on this?
    Best regards,
    Andrew Wong

    Hi Senthil,
    I think you answered your query in your question itself
    The user ID and password need to be maintained in RFC destination in SM59.
    Go to SM59 and then click on test connection..if it does not ask for ID and passwoed that means correct ID and password is maintained in SM59 otherwise maintain it.
    Regards,
    Atish

  • Error while activating the function module

    hi,
    am getting error while activating the function module i.e. program or report statement is missing.
    thank you in advance
    karthik

    hii vinu,
    hi there....
    make sure that the Processing type in Attributes tab is 'Normal function module'. Also chk the general data, it must be having some name in the Program Name and include name column.try checking the program names in se38, if the program is of type include or not. you can also chk by writting  a program call the function module and test it
    I hope this will solve the query. in my case, SAPLZ123 is the program name and LZ123U28 is the include name.
    or
    Its common prob with Function module.
    Goto SE80->Give Function group name->Right click on it->Activate.
    regards,
    Shweta

  • Getting Error while integrating Crystal reports with Java

    Hi All,
    I am getting below error while integrating crystal report with java
    [java] os.arch = x86
    [java] java.lang.NoSuchMethodError: com.crystaldecisions.Utilities.d.<init>
    (Ljava/awt/Image;I)V
    [java] at com.crystaldecisions.Utilities.af.try(Unknown Source)
    [java] at com.crystaldecisions.Utilities.af.a(Unknown Source)
    [java] at com.crystaldecisions.Utilities.af.<init>(Unknown Source)
    [java] at com.businessobjects.crystalreports.viewer.applet.g.a(Unknown
    Source)
    [java] at com.crystaldecisions.ReportViewer.ReportViewer.start(Unknown
    Source)
    [java] at ReportViewerFrame.<init>(ReportViewerFrame.java:51)
    [java] at JRCViewReport.launchApplication(JRCViewReport.java:29)
    [java] at JRCViewReport$1.run(JRCViewReport.java:50)
    [java] at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:
    178)
    [java] at java.awt.EventQueue.dispatchEvent(EventQueue.java:443)
    [java] at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDi
    spatchThread.java:190)
    [java] at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDisp
    atchThread.java:144)
    [java] at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.j
    ava:138)
    [java] at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.j
    ava:130)
    [java] at java.awt.EventDispatchThread.run(EventDispatchThread.java:98)
    Any help can be appreciated
    Kalyan

    Hi All,
    For got to mention i am using crystal reports XI release 2 with JDK1.4.
    Kalyan

  • Error: demo.model.AppModule: Application module demo.model.AppModule has a view instance EmpByEmail1 that references an invalid view object.

    Error: demo.model.AppModule: Application module demo.model.AppModule has a view instance EmpByEmail1 that references an invalid view object.
      intially i created view object named EmpByEmail.........for that EmpByEmail1 is created in datacontrols....i deleted EmpByEmail in demo.model by mistake and i created again with same name EmpBYEmail another view object...again another EmpByEmail2 is created in datacontrols.....
    while i am running i am getting following error:::::::
    Error: demo.model.AppModule: Application module demo.model.AppModule has a view instance EmpByEmail1 that references an invalid view object.

    Hi,
        Please seasrch for the EmpByEmail1 file in ur project and remove all the details in the Page Def and UI and then try again.
    Due to the EmpByEmail1 existance in page Def this may occur . It may help , still if it was not working then I am sorry for that.

  • Error in integration Engine(indicating red color)

    Hi all,
    I am getting error in integration engine monitoring it shows red in color.
    In that below PING status its telling like Unable to log on to system with PIRWBUSER.
    Post installation has done in 001 client by default.the user is also existijng in that client its a service user.Anyone can help me out to resolve this issue.
    Regards
    Vijay Kumar G

    Please check if the system XXX exists user PIRWBUSER.
    Check the exchange profile properly configured or not and also check for the Authorizations for the said user.
    See the below links also
    Demo application: "You cannot log on to system .... with user XIRWBUSER
    RWB error: javax.ejb.CreateException  XIRWBUSER cannot log
    How to get rid of the error message on RWB?

  • An error occurred in the privileges module... appleshare IP share disk

    Machine:
    G4 Mini Tower (Graphite)
    Mac OS 9.2
    AppleShare IP 6.3
    This machine whilst dated has been hosting our files for years without issue.
    The files we share across the network are on a FireWire disk. We had to replace the disk with a newer version, of exactly the same size (250gb) but if the machine is rebooted, the FILE SERVER blinks indefinately and no volumes are shared.
    If the machine is booted without the FireWire volume mounted, the FILE SERVER starts within a matter of seconds. I can then mount the Firewire volume fine. When I lanch Privileges and navigate to the FireWire volume and select Choose, I get the error:
    An error occurred in the Privileges module in entry point "RACMMenu Item Selected". A programmer error has occurred. -50
    I have read an article in the knowledge base - but this only refers to using OS9 in Classic mode. I can confirm that we are not using OSX just OS9.2 and AppleShare IP 6.3
    Any suggestions would be welcomed!
    Thanks

    When File Sharing starts up on a "regular" Mac OS 9 system that does not generally have File Sharing turned on, the disk being shared chugs away for several minutes building the invisible file with the privileges in it before finally acknowledging that File Sharing is ON.
    One possibility is that you may not be waiting long enough. (Long enough may be overnight on a really big Volume with a FireWire interface.)
    -50 paramErr Error in user parameter list
    so I expect it is what it says -- the programmer made an error in a procedure call and you are the first one to find it.

  • Java.lang error while Integrating R12 EBS with 10g AS

    hi
    I am integrating Oracle E-Business Suite Release 12 with 10g AS following metalink document 376811.1
    While applying patch 5983637 (refer 'Pre-Install Task 4' in metalink doc) I got the error
    java.lang.ArrayIndexOutOfBoundsException:0
    Before applying I brought down 10gAS middletier services & Infra tier opmn services. Only Infra tier listener & database are up.Is this right?
    Kindly help
    Thanks
    JIL

    Did you ever get an answer to this... I am facing this problem right now
    Kathy

  • PUB01015 Error - Location Locked - While Deploying modules in parallel

    Hi
    I wrote a TCL script to deploy the OWB Objects to environments.
    I am calling the script 30 times for deploying 30 modules in a batch file in parallel.
    (I am using the 'start' dos command to start them in parallel.)
    I am getting the following error for some of the modules.
    ====
    Failed to Connect to the OWB Repository and start Control Center .. : PUB01015:
    Object EDSDEV12_STAGE_LOCATION is already locked by OS user 'sai.durga' using ma
    chine 'CRPDB002'!
    ====
    The number of modules being locked each time I try is not consistent.
    Sometimes only 2 will be success full and sometimes 17 will be successfull and the rest will give the above error.
    Is there any setting where this is being defined that only a particular number of objects can be deployed ?
    Or is there an API (?) using which I can unlock them and try ?
    Or is it related to commit ? I am calling the commit at the end of the script for each module.
    Appreciate any help on this.
    Thanks and Regards
    Sameer

    use OMBSAVE and OMBCOMMIT frequently in the TCL script.
    During the process of deployment
    is any one doing some other activity like "debug"
    on the same location ?
    According to my experience it comes when some user is using Degug and at the same time some other user is
    trying to deploy some mapping on the same location.
    Edited by: Nawneet on Mar 20, 2009 12:24 AM

  • Integration on quality module and sd module

    Hai experts
    Any integration on quality module and sd module in sap if yes where the integration point..........
    thanking u.....
    regards
    anjan

    SD module is highly integrated with the other modules in SAP.
    Sales Order –
    Integration Points                      Module
    •Availability Check             -       MM
    •Credit Check                   -       FI
    •Costing                        -       CO/ MM
    •Tax Determination              -       FI
    •Transfer of Requirements       -       PP/ MM
    Delivery & Goods Issue –
    Integration Points                      Module
    •Availability Check             -       MM
    •Credit Check                   -       FI
    •Reduces stock                  -       MM/ QM (Inspection before moving stock to unrestricted Stock / before despatching the material)
    •Reduces Inventory $            -       FI/ CO
    •Requirement Eliminated         -       PP/ MM
    Billing -
    Integration Points                      Module
    •Debit A/R                      -       FI/ CO
    •Credit Revenue                 -       FI/ CO
    •Updates G/ L                   -       FI/ CO
      (Tax, discounts, surcharges, etc.)
    •Milestone Billing              -       PS
    Return Delivery & Credit Memo -
    Integration Points                      Module
    •Increases Inventory            -       MM/ QM (For Inspection)
    •Updates G/ L                   -       FI
    •Credit Memo                    -       FI
    •Adjustment to A/R              -       FI
    •Reduces Revenue                -       FI

  • Transaction Code to see the integration points between modules

    Dear Gurus,
    I came to know that, there is a trnsaction available in SAP ECC to see the integration points between modules.
    Eg. PP-MM & MM-PP
    If anyone found pls post it here.
    Regards,
    Siva.

    HI Siva
    Plz tell us from where you came to know, since we all havnt yet got that Tcode.Its various settings and configurations and Masters which intergrate the various  Modules like PP SD FI CO etc.
    BTW
    For  PP-SD
    Availability Check in Material master,MTO Scenario-MRP Run, thru Sales order 
    PP-MM
    Material Master ,Goods movement ,STO, Reservation , Purchase Requisitions, Purchase orders , MRP Run
    Quota arrangements etc
    PP HR
    In work Center capacity
    PP QM
    QM view Inspection type for each type of material
    PP CO
    Activities Confirmations COPA
    PP PM
    Euipment master, workcenter euipment
    I hope it is clear to you now
    Regards
    Anupam Sharma

  • Integration of ATG module in Enterprise Application project

    Hi,
    Could any one please give me steps for integrating a ATG module in a Enterprise Application.

    There could be different types of approaches and you would have to weigh them in order to decide which is best suitable in your environment. A quick way could be like creating a standalone ATG EAR assembling your ATG module so that you can refer and use that ATG EAR from your other modules just like any standard EAR. Standalone ATG EAR will pack everything related to ATG in itself and will not refer to ATG installation. Another way can be is to instrument everything required for ATG within an existing module like adding the PageFilter, NucleusServlet etc. (refer to any existing web.xml of an existing ATG application). You would also have to hook atg_bootstrap.war and atg_bootstrap_ejb.jar as well. All of this may require many other tweaks also in order to successfully integrate whole of ATG and to start it when you start rest of the modules. I think better would be to create standalone EAR and use it.

  • Link error: Failed to open external module

    Newbie question #2... I'm in chapter 5 of the tutorial, just added the button to calculate min and max values of the sinewave. I get two link errors when I try to run the program.
    2 Project link errors:
     Failed to open external module
     Failed to open external module
    If I comment out the MaxMin1D function and fudge the min and max values the program runs.
    Any ideas?
    The function I added is as follows which appears  to be identical to the sample in the tutorial.
    int CVICALLBACK FindMaxMin (int panel, int control, int event,
            void *callbackData, int eventData1, int eventData2)
        ssize_t min_index;
        double min;
        ssize_t max_index;
        double max;
    //    max = 5;
    //    min = 3;
        switch (event)
            case EVENT_COMMIT:
                MaxMin1D(sine, 100, &max, &max_index, &min, &min_index);
                SetCtrlVal(panelHandle, PANEL_MAX, max);
                SetCtrlVal(panelHandle, PANEL_MIN, min);            
                break;
            case EVENT_RIGHT_CLICK:
                break;
        return 0;

    I searched for analysis.h, found it and copied it to the same folder as sample1.c and the program now links and runs.
    I'm wondering if I'm missing something in the configuration (not smart enough to know where to search)???
    Thanks

  • Script error line 2053 the specified module could not be found URL res://ieframe.dll/preview.js

    Script error line 2053 the specified module could not be found URL res://ieframe.dll/preview.js

    The issue is caused when Windows creates the printer profile in the control panel that it doesn't correctly create it with the drivers.
    We're not going to completely uninstall all the HP software, instead we're going to remove the corrupt Windows printer profile and reinstall it.  Total time for this on an average computer is about 5-10 minutes to completely repair (including reboot).
    1) Navigate to Start Menu > Devices and Printers or Start Menu > Control Panel > Printers
    2) Select each printer profile for the printer with an issue, then select remove device/printer.
    3) Reboot
    4) Navigate to Start Menu > All Programs > HP > insert model # here > Add Printer (or Setup Wizard)
    5) Follow the setup prompts to reinstall the printer profile and it recreates the Windows printer.
    6) Run the HP Update Tool from Start Menu > All Programs > HP if your printer installs it, rebooting afterwards if necessary.
    7) Test by printing google.com (uses very little ink when the test page comes out).
    Let me know if you have any questions or issues.
    Thanks,
    Dan
    I work for an internation tech company and personally perform thousands of computer repairs a year. I'm based out of the US working for a US company, and have been working on computers for over 13 years.
    ****Click the White Kudos star to say thanks****
    ****Please mark Accept As Solution if it solves your problem****

Maybe you are looking for