Error in Inventory Service...

I have an error on my ZenWorks Inventory service but I am unsure what I need
to do about it.
The error is:
Trying to connect to Master XML Server
The Novell knowledgebase tells me that I need to run ZWF.NCF before the
StartInv.NCF, but I cannot seem to find it anywhere on the server.
What do I need to do?
Thanks.
Delon E. Weuve
Senior Network Engineer
Office of Auditor of State
State of Iowa

Delon,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

Error loading Inventory Service

Just completed several installs of Zen for Desktops 6.5 SP2. No problems
except for one server that will not load the Inventory service. Tried
renaming the Zenworks folders and reinstalling, deleting the objects and
reinstalling, etc... Found the following TID:
http://support.novell.com/cgi-bin/se...i?10098429.htm which
describes a situation where the security folder is not created in <ZENworks
install volume>ZENworks/zws. The fix is supposed to be just creating a
security folder and copying a zws.properties file from a working server.
This does not work. I looked at one of my functioning servers and there are
2 files: .keystore and keypair.dat located in the working servers security
folder.
How do I generate a new .keystore and new keypair.dat files? Is there
something similar to tckeygen.ncf I can use to recreate these files?
Many thanks
Jeff

Jisaacs,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Inventory service does not start 610 failed login

L.S.
Netware 6.5, SP6
ZEN 7.01SP1IR1
Sybase database
Standalone server
My inventory service does not start. I've looked around but did not yet find the solution. I did have an error I've read nothing about:
logger screen: java:Class com.novell.....ZENWorksInventoryservicemanager exited with status -1
C1, Inventory service object shows 610: database location policy is not configured (but it is)
NRM: health, failed login: user: .CN=Server package_ZENSERVER:Netware:ZENDateBase.O=context.T= tree
Any suggestions
Thomas Roes

Thomasroes,
either of these help?
http://www.novell.com/support/php/se...1%200%20506894
http://www.novell.com/support/php/se...1%200%20506894
Shaun Pond

Unable to read the Inventory Service Object

Hi,
I got the error message when I startinv.
Errpr code: 603. Unable to read the Inventory Service Object in Novell
eDirectory.
Any one know how to fix it.
Thanks

Mail,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Inventory Services does not start up

ZFD3.2 installed on "ZFD" resource in a 2-node NW6SP2 Cluster (SOU-SRV3 and
SOU-SRV4)
I have just installed ZFD3.2 with NCS. When I try to start the Inventory
Service I get the following error message briefly displayed on the Server
Console Screen:
Could not initialize status logger: Error in initialzing the nds
I have noted that I have two Zen Inventory Service Objects:
SOU-SRV3_ZenInvService & SOU-SRV4_ZenInvService.
I would have thought that during the install I would have an inventory
service object that represented the virtual server object. ie:
SOU-CLUSTER1_ZFD_SERVER_ZenInvService). It is this virtual server object
that I have configured as the Inventory Service DN in the Config.Properties
file.
Have I made an error during the install or do I just need to modify the
Config.Properties file?
Any help would be appreciated as I really want to get this working as a
Cluster Resource.
Thanks in advance
Ali

Ali,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Inventory service will not start

We recently had a drive crash in our array and had some data errors. We've
got the new drive in and everything seems to be running except for the
Inventory service. I can load the mgmtdbs and it loads, but when I run the
Startinv, I get
java: Class
com.novell.zenworks.desktop.inventory.servercommon .ZenworksInventory
ServiceManager exited with status 1.
I was about to upgrade to IR7 before the drive crashed, so I went ahead an
applied it, figured maybe it would overwrite a corrupt file maybe, but
still getting the same error. I found a tid explaing how to turn on
detailed logging, but it seems it doesn't get far enough to start logging.
I've seen a bunch of posts with this problem, but most are Zenworks 3
related and mention
java: Class com.novell.orb.service.naming.NamingServer exited with status 1
Does this relate to Zenworks 4.01? It's not loaded though. When I do a
java -show, I get
org.apache.tomcat.startup.Main ID 218
com.novell.zenworks.desktop.remotewakeup.zenworksw olservicem ID 460
com.novell.application.zenworks.autowsmanagement.w simport.im ID 466
com.novell.application.zenworks.autowsmanagement.w sremoval.r ID 470
We're running Netware 6.0 sp 5, java 1.3.1_10, ZFD 4.01 IR7.
Any help is appreciated, Thanks

Ok, I was finally able to get a screenshot of the screen that pops up when
I run startinv.
starting inventory services. please wait...
exception in thread "main" java.lang.nullpointerexception
at com.novell.zenworks.desktop.inventory.servercommon .zenworksinventorys
servicemanager.main(zenworksinventoryservicemanage r.java:275)

Java page fault with inventory service

Hi
Having an issue with java and the inventory service. Shortly after
lunching I get the following error:
java: Page fault processor exception occurred while executing class
com.novell.z
enworks.desktop.inventory.servercommon.ZENWorksInv entoryServiceManager
State of Registers at Processor Exception:
EIP=8DDC4A7C, EFLAGS=10212, EAX=0, ECX=D9917A08, EDX=50,
EBX=7070A86C, ESP=7070A834, EBP=7070A834, ESI=7070A87C, EDI=D9917A08,
The exception occurred while executing code in: JVM.NLM (8dbbe000)
The exception occurred while running thread: Java_1845 XMLTime (A63980E0)
java: Class
com.novell.zenworks.desktop.inventory.servercommon .ZENWorksInventory
ServiceManager exited with status -5
I have not been able to track down a tid.
Thanks,
Will

Sorry forgot the specs:
Zen sp1 ir3a hp2
netWare 6.5 sp6.
Java Version 1.42.07
Will K wrote:
> Hi
>
> Having an issue with java and the inventory service. Shortly after
> lunching I get the following error:
>
> -------------------------------------------------------------------------------
>
> java: Page fault processor exception occurred while executing class
> com.novell.z
> enworks.desktop.inventory.servercommon.ZENWorksInv entoryServiceManager
>
> State of Registers at Processor Exception:
> EIP=8DDC4A7C, EFLAGS=10212, EAX=0, ECX=D9917A08, EDX=50,
> EBX=7070A86C, ESP=7070A834, EBP=7070A834, ESI=7070A87C, EDI=D9917A08,
>
> The exception occurred while executing code in: JVM.NLM (8dbbe000)
> The exception occurred while running thread: Java_1845 XMLTime (A63980E0)
> -------------------------------------------------------------------------------
>
> java: Class
> com.novell.zenworks.desktop.inventory.servercommon .ZENWorksInventory
> ServiceManager exited with status -5
>
> I have not been able to track down a tid.
>
> Thanks,
>
> Will

603: Unable to read the Inventory Service Object in Novell eDirectory

I receive this error when starting the inventory service on a NetWare 6.0
server. Any ideas?

aha, thanks for the feedback! That's in the docs: this is for zen7, but the same is for 6.5 http://www.novell.com/documentation/...a/a42r1l6.html
Shaun Pond

Device Stuck in "All Learning Devices in Inventory Services"

LMS Version 4.2.5
one 6509 stuck in "All Learning Devices in Inventory Services"
    *** Data Collector Status Information ***
Discovery Progress    = 10% completed
Error Code                   = N/A
Error Message             = N/A
I have remove this device and add again,and also adjust the snmp timeout ,this device still stuck in learning state.
But,this device inventory collection and config archive function is ok.
Is this a bug,or how can I do next?

Is it happening just for a single device ?
are all the other devices are in KNown status .
Any firewall between this device and LMS ?
Thanks-
Afroz

Inventory services not started

Hi,
I've installed Zfd 4.01 with IR 6 in a w2000 server and starting inventory
services the following errors occurs:
Iniciando Servios de Inventrio. Aguarde...
java.lang.IllegalArgumentException: unknown format type at
at java.text.MessageFormat.makeFormat(MessageFormat.j ava:898)
at java.text.MessageFormat.applyPattern(MessageFormat .java:318)
at java.text.MessageFormat.<init>(MessageFormat.java: 248)
at java.text.MessageFormat.format(MessageFormat.java: 475)
at
com.novell.zenworks.desktop.inventory.common.Inven toryServiceErrorLogger.lo
gErrorAndExit(InventoryServiceErrorLogger.java:79)
at
com.novell.zenworks.desktop.inventory.servercommon .ZENWorksInventoryService
Manager.main(ZENWorksInventoryServiceManager.java: 392)
Exception in thread "main"
Somebody knows as to decide?
Tks.
Leila.

Leila,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Inventory Service won't load

We're running Zenworks 6.5 on a Netware 6.5 SP2 server.
We recently applied the Zenworks 6.5 support pack 2 and since then we've
been unable to start the Inventory service.
When we type StartSer * at the console the error that comes back from the
logger screen is: java: Class
com.novell.zenworks.desktop.inventory.servercommon .ZENWorksInventory Start
Service exited with status -1.
I've checked the database and it appears to load correctly. The database
runs on the same server as the Inventory service.
I've checked the Status in the inventory service object and the last status
is a 602 error.
I've also checked that the port the service is trying to use isn't in use
and the inventory service objects in C1 and can't see any issues.
Anybody have any ideas?

I would chek to make sure that your JAVA search settings are correct on your
server
SYS:\JAVA\BIN
SYS:\JAVA\NWGFX\BIN
SYS:\JAVA\NJCLV2\BIN
should all be in the path.
I have seen these entries as either missing or pointing to the wrong
location as a cause of similar problems.
Craig Wilson - MCNE, MCSE, CCNA
Novell Support Forums Volunteer Sysop
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared either Novell or any rational human.
<[email protected]> wrote in message
news:VpTEh.1580$[email protected]..
> We're running Zenworks 6.5 on a Netware 6.5 SP2 server.
>
> We recently applied the Zenworks 6.5 support pack 2 and since then we've
> been unable to start the Inventory service.
>
> When we type StartSer * at the console the error that comes back from the
> logger screen is: java: Class
> com.novell.zenworks.desktop.inventory.servercommon .ZENWorksInventory Start
> Service exited with status -1.
>
> I've checked the database and it appears to load correctly. The database
> runs on the same server as the Inventory service.
>
> I've checked the Status in the inventory service object and the last
> status
> is a 602 error.
>
> I've also checked that the port the service is trying to use isn't in use
> and the inventory service objects in C1 and can't see any issues.
>
> Anybody have any ideas?
>

Inventory service will not load

I tried posting earlier on the install forum but have no reply so I'm
trying here...
Just completed several installs of Zen for Desktops 6.5 SP2 on Netware 6.5
SP5. No problems except for one server that will not load the Inventory
service. Tried renaming the Zenworks folders and reinstalling, deleting the
objects and reinstalling, etc... Found the following TID:
http://support.novell.com/cgi-bin/se...i?10098429.htm which
describes a situation where the security folder is not created in
ZENworks/zws. The fix is supposed to be just creating a security folder and
copying a zws.properties file from a working server. This does not work. I
looked at one of my functioning servers and there are 2 files: .keystore
and keypair.dat located in the working servers security folder.
How do I generate new .keystore and new keypair.dat files? Is there
something similar to tckeygen.ncf I can use to recreate these files?
Many thanks
Jeff

[email protected],
What os is the server?
what error do you get when trying to start inventory?
Jared Jennings - Data Technique, Inc.
Novell Support Forums Sysop
My Blog and Wiki with Tips, Tricks, and Tutorials
http://jaredjennings.org

Error in ALE Service While Creation of Vendor Master

hi,
I am using a scenario where a third party system is sending vendor master data to a R/3 system The file is picked up by the file adapter(sender) and mapped to IDOC format, using Idoc adapter (receiver). A Vendor is then created by posting the CREMAS03 IDOC into the R/3 system.
Everything goes fine till the Idoc comes into the R/3 system. There in BD87(Idoc Status Monitor), getting the "Error in ALE Service" error. When expanded further the specific error is that of "Cross-system company code xxxx does not exist". What is generally the cause of this error and how would I resolve it?
For those of you who have attended TBIT 40, this scenario is Example 1 - Creation of Vendor Master Data.
Any help would be appreciated?
regards,
SK

one more thing
if you want to be sure that you're using the right data
try to set your system to send the vendor data out
first - send it from BD14
and then you'll know which fields do you need
if you do that take a look at segment E1LFB1M
and check for BURKS
Regards,
michal

Error message received - Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services.

I've done it 6 times the steps you mention to get this thing to work but still it doesn't work for me. I've downloaded iTunes, installed it, and again the same message it's going on Error message received - Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services.
I've deleted iTunes, Apple Mobile Device Support, Apple Software Update and Bonjour, restart my computer and downloaded again (6 times) and still doesn't work for me. What should I do?

I deleted all Apple products you mentioned above (iTunes, Apple Mobile Device Support, Apple Software Update and Bonjour), deleted the prior downloads I had previously tried to install and then emptied my recycle bin. Then I started with a new download of iTunes before the problem was solved for me.
It really ***** that Apple does not give any direct support for its own products.
Good Luck

Error while running service tax program (New)

Hi
I have created S3 as interim tax code and S4 as final tax code. I assigned S4 to S3 as a target tax code. Entries are perfectly flowing.
But when i do service tax program for, session is created properly. When i run it in SM35, for gived error
"Tax code S4 may only contain one assignment line"
I have given routine 166 in OBQ3 for ECess and SHEC.
I tells me to do following procedure:
Use a different tax code.
For direct postings to a tax account, you might have to define a separate tax code for which only one line with a percentage rate other than zero is active in percentage rate maintenance. All other lines must be inactive.
Please help me.
Edited by: Deepak Agrawal on May 4, 2010 1:29 PM

There is one interim service tax code (for normal services) - S1. Final service tax code S2 is created assigned to S1 as target tax code.
Entry passed:
Exp A/c.. Dr                                   500000
Service Tax Basic (deferred)       50000
Service Tax ECS (deferred)         1000
Service Tax SHEC (deferred)       500
   To Vendor A/c                                        551500
For this service tax program (new) is working fine.
For the GTA scenario where service tax is not charged in invoice but we have to pay to government, in that case i have created one interim tax code G1 and i have assigned final tax code S2.
Entry passed for GTA (invoice raised by transporter is Rs. 500000):
Exp A/c.. Dr                                   515000
   To Service Tax Basic (deferred)       50000
   To Service Tax ECS (deferred)         1000
   To Service Tax SHEC (deferred)       500
   To Vendor A/c                                   500000
But when i execute the program i can see three line items (for basic, interim and SHEC)
But when i run the session, it gives error:
Tax code S2 may only contain one assignment line.
I AM UNABLE TO UNDERSTAND, WHY ITS GIVING ERROR FOR GTA SERVICE TAX TRANSFER
Edited by: Meenu_ND on Jun 1, 2010 10:48 AM

Error in Inventory Service...

Similar Messages

Maybe you are looking for