Error in invoking target 'agent nmb nmo nmhs' of makefile ins_emagent.mk
Hi,
I am installing Oracle 11g R 2 on AIX 6.1. I have met all the pre reqs according to installation document, but at 69% of installation process i am getting the following error
Error in invoking target 'agent nmb nmo nmhs' of makefile '/ora/product/v112/sysman/lib/ins_emagent.mk'
Any help????????
Regards,
you have interim fix and APAR for other technology level too like below. Hope this will help guys want to fix oracle installation on aix 6.1
https://www-304.ibm.com/support/docview.wss?uid=isg1IZ89304&crawler=1
https://www-304.ibm.com/support/docview.wss?uid=isg1IZ89300
https://www-304.ibm.com/support/docview.wss?uid=isg1IZ88711
Similar Messages
-
Error in invoking target 'agent emsubagent nmo nmb' of makefile '/
I am trying to cofugure 10.1.0.3 RAC on rh3 update 3.
kernal version is 2.4.21-20.ELsmp.
I am able to install CRS sucessfully. But while installing RAC database software i got the make file link error.
Error in invoking target 'agent emsubagent nmo nmb' of makefile '/u01/app/oracle/product/10.1.0.3/db_1/sysman/lib/ins_sysman.mk'
Any one else ran in to the same issue?
Here is the log..
Start output from spawned process:
make -f /u01/app/oracle/product/10.1.0.3/db_1/sysman/lib/ins_sysman.mk relink_sharedobj SHAREDOBJ=libnmemso
make[1]: Entering directory `/u01/app/oracle/product/10.1.0.3/db_1/sysman/lib'
gcc -o /u01/app/oracle/product/10.1.0.3/db_1/sysman/lib/libnmemso.so -m32 -Wl,--whole-archive -shared -L/u01/app/oracle/product/10.1.0.3/db_1/lib32/ -L/u01/app/oracle/product/10.1.0.3/db_1/lib32/stubs/ -L/u01/app/oracle/product/10.1.0.3/db_1/sysman//lib32/ -L/u01/app/oracle/product/10.1.0.3/db_1/lib/ -L/u01/app/oracle/product/10.1.0.3/db_1/lib -L/u01/app/oracle/product/10.1.0.3/db_1/sysman/lib/ -Wl,-rpath,/u01/app/oracle/product/10.1.0.3/db_1/lib32/:/u01/app/oracle/product/10.1.0.3/db_1/sysman//lib32/ /u01/app/oracle/product/10.1.0.3/db_1/sysman//lib32/libnmem.a /u01/app/oracle/product/10.1.0.3/db_1/sysman//lib32/libnmer.a /u01/app/oracle/product/10.1.0.3/db_1/sysman//lib32/libnmeu.a /u01/app/oracle/product/10.1.0.3/db_1/sysman//lib32/libnmt.a /u01/app/oracle/product/10.1.0.3/db_1/sysman//lib32/libnml.a /u01/app/oracle/product/10.1.0.3/db_1/sysman//lib32/libnmee.a /u01/app/oracle/product/10.1.0.3/db_1/sysman//lib32/libnmefmgr.a /u01/app/oracle/product/10.1.0.3/db_1/sysman//lib32/libnmevr.a /u01/app/oracle/product/10.1.0.3/db_1/sysman//lib32/libnmehu.a /u01/app/oracle/product/10.1.0.3/db_1/sysman//lib32/libnmehl.a /u01/app/oracle/product/10.1.0.3/db_1/sysman//lib32/libnmepm.a /u01/app/oracle/product/10.1.0.3/db_1/sysman//lib32/libnmedc.a /u01/app/oracle/product/10.1.0.3/db_1/sysman//lib32/libnmedt.a /u01/app/oracle/product/10.1.0.3/db_1/sysman//lib32/libnmedm.a /u01/app/oracle/product/10.1.0.3/db_1/sysman//lib32/libnmedr.a /u01/app/oracle/product/10.1.0.3/db_1/sysman//lib32/libnmeb.a /u01/app/oracle/product/10.1.0.3/db_1/sysman//lib32/libnmec.a /u01/app/oracle/product/10.1.0.3/db_1/sysman//lib32/libnmesched.a /u01/app/oracle/product/10.1.0.3/db_1/sysman//lib32/libnmectl.a /u01/app/oracle/product/10.1.0.3/db_1/sysman//lib32/libnmejc.a /u01/app/oracle/product/10.1.0.3/db_1/sysman//lib32/libnmej.a -L/u01/app/oracle/product/10.1.0.3/db_1/jdk/jre//lib/i386/client -L/u01/app/oracle/product/10.1.0.3/db_1/jdk/jre//lib/i386 -z lazyload -ljava -ljvm -lverify -z nolazyload -Wl,-rpath,/u01/app/oracle/product/10.1.0.3/db_1/lib32/:/u01/app/oracle/product/10.1.0.3/db_1/sysman//lib32/:/u01/app/oracle/product/10.1.0.3/db_1/jdk/jre//lib/i386/client:/u01/app/oracle/product/10.1.0.3/db_1/jdk/jre//lib/i386 /u01/app/oracle/product/10.1.0.3/db_1/sysman//lib32/libnmeclumgr.a /u01/app/oracle/product/10.1.0.3/db_1/sysman//lib32/libnmecluster.a /u01/app/oracle/product/10.1.0.3/db_1/sysman//lib32/libnmexml.a -Wl,--no-whole-archive -lxml10 -lcore10 -lnls10 -lunls10 -lclntsh -lnnz10 -lpthread -lnsl -lm -ldl -Wl,-rpath,/u01/app/oracle/product/10.1.0.3/db_1/lib32 `cat /u01/app/oracle/product/10.1.0.3/db_1/lib32/sysliblist` -ldl -lm
/usr/bin/ld: cannot open crti.o: No such file or directory
collect2: ld returned 1 exit status
make[1]: *** [u01/app/oracle/product/10.1.0.3/db_1/sysman/lib/libnmemso.so] Error 1
make[1]: Leaving directory `/u01/app/oracle/product/10.1.0.3/db_1/sysman/lib'
make: *** [libnmemso] Error 2
End output from spawned process.
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'agent emsubagent nmo nmb' of makefile '/u01/app/oracle/product/10.1.0.3/db_1/sysman/lib/ins_sysman.mk'. See '/u01/app/oracle/oraInventory/logs/installActions2004-12-08_11-47-04AM.log' for details.
Exception Severity: 1
The output of this make operation is also available at: '/u01/app/oracle/product/10.1.0.3/db_1/install/make.log'1. install 32-bit glibc libraries (e.g. in my case glibc-devel-2.3.3-74.i386.rpm in Fedora Core 3)
2. test if you can compile programs in 32 bit mode using '-m32' flag
3. run the installer again. -
Error invoking target 'agent emsubagent nmo nmb' on Mac OS X
Hello, I'm working on trying to install Oracle 10g on Mac OS X 10.3.7 (The test server I am using is just OS X, not OS X Server. Right now I'm just doing an install with pretty much all defaults just to get it to install. Only thing I did was make the install go to /usr/local/ora10g and the data goes to /var/oradata. The install stops at 51% at "Building Agent Libraries" and above it says "Linking 'Oracle Database 10g 10.1.0.3.0'. This is the error that comes up:
Error in invoking target 'agent emsubagent nmo
nmb' of makefile
'/usr/local/ora10g/sysman/lib/ins_sysman.mk'.
Here's the last few lines from the log file:
make -f /usr/local/ora10g/sysman/lib/ins_sysman.mk emtgtctl2
gcc -o emtgtctl2 -L/usr/local/ora10g/lib/ -L/usr/local/ora10g/sysman/lib/ `cat /usr/local/ora10g/lib/sysliblist` -L/usr/local/ora10g/lib -lm `cat /usr/local/ora10g/lib/sysliblist` -L/usr/local/ora10g/lib -lm /usr/local/ora10g/sysman/lib//s0nmetgctl.o -lnmectl -lclntsh -lnmemso -lcore10 -framework JavaVM
rm -f /usr/local/ora10g/bin/emtgtctl2
mv emtgtctl2 /usr/local/ora10g/bin/emtgtctl2
/bin/chmod 6751 /usr/local/ora10g/bin/emtgtctl2
chmod: /usr/local/ora10g/bin/emtgtctl2: Operation not permitted
make: *** [iemtgtctl] Error 1
End output from spawned process.
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'agent emsubagent nmo nmb' of makefile '/usr/local/ora10g/sysman/lib/ins_sysman.mk'. See '/Users/teddy/oraInventory/logs/installActions2005-02-14_01-19-03PM.log' for details.
Exception Severity: 1
I can tell it seems to be an error with chmod, but what that problem is I'm having trouble trying to figure out. I checked the permissions of the file and it seems fine. Thanks for any help.1. install 32-bit glibc libraries (e.g. in my case glibc-devel-2.3.3-74.i386.rpm in Fedora Core 3)
2. test if you can compile programs in 32 bit mode using '-m32' flag
3. run the installer again. -
Error in invoking target 'agent nmo nmb emsubagent'
I'm working on 10gR2 installation on HP-UX 11.23.
Installer gives the following error: Error in invoking target 'agent nmo nmb emsubagent' of
makefile '/opt/app/oracle/product/10.2.0/db_1/sysman/lib/ins_sysman.mk'.
In the log file
INFO: Calling Action unixActions10.2.0.1.0 make
registerOnly = false
installMakePath = /bin/make
installMakeFileName = /opt/app/oracle/product/10.2.0/db_1/sysman/lib/ins_sysman.mk
installTarget = agent nmo nmb emsubagent
undoMakeFileName =
installArguments = ORACLE_HOME=/opt/app/oracle/product/10.2.0/db_1,
logFile = /opt/app/oracle/product/10.2.0/db_1/install/make.log
undoTarget =
progMsg = Building Agent libraries
INFO: The output of this make operation is also available at: '/opt/app/oracle/product/10.2.0/db_1/install/make.log'
INFO:
INFO: Start output from spawned process:
INFO: ----------------------------------
INFO:
INFO: /usr/ccs/bin/make -f /opt/app/oracle/product/10.2.0/db_1/sysman/lib/ins_sysman.mk relink_sharedobj SHAREDOBJ=libnmemso LIBDIR=lib32
INFO: ld s -G -b -o /opt/app/oracle/product/10.2.0/db_1/sysman/lib/libnmemso.sl -c /opt/app/oracle/product/10.2.0/db_1/sysman/lib32/libnmemso.def -L/opt/app/oracle/product/10.2.0/db_1/lib32/ -L/opt/app/oracle/product/10.2.0/db_1/lib32 -L/opt/app/oracle/product/10.2.0/db_1/sysman/lib32/ b /opt/app/oracle/product/10.2.0/db_1/lib32/:/opt/app/oracle/product/10.2.0/db_1/lib/:/opt/app/oracle/product/10.2.0/db_1/sysman/lib32/ /opt/app/oracle/product/10.2.0/db_1/sysman/lib32/libnmem.a /opt/app/oracle/product/10.2
INFO: .0/db_1/sysman/lib32/libnmer.a /opt/app/oracle/product/10.2.0/db_1/sysman/lib32/libnmeu.a /opt/app/oracle/product/10.2.0/db_1/sysman/lib32/libnmt.a /opt/app/oracle/product/10.2.0/db_1/sysman/lib32/libnml.a /opt/app/oracle/product/10.2.0/db_1/sysman/lib32/libnmee.a /opt/app/oracle/product/10.2.0/db_1/sysman/lib32/libnmefmgr.a /opt/app/oracle/product/10.2.0/db_1/sysman/lib32/libnmevr.a /opt/app/oracle/product/10.2.0/db_1/sysman/lib32/libnmehu.a /opt/app/oracle/product/10.2.0/db_1/sysman/lib32/libnmehl
INFO: .a /opt/app/oracle/product/10.2.0/db_1/sysman/lib32/libnmepm.a /opt/app/oracle/product/10.2.0/db_1/sysman/lib32/libnmedc.a /opt/app/oracle/product/10.2.0/db_1/sysman/lib32/libnmedt.a /opt/app/oracle/product/10.2.0/db_1/sysman/lib32/libnmedm.a /opt/app/oracle/product/10.2.0/db_1/sysman/lib32/libnmedr.a /opt/app/oracle/product/10.2.0/db_1/sysman/lib32/libnmeb.a /opt/app/oracle/product/10.2.0/db_1/sysman/lib32/libnmec.a /opt/app/oracle/product/10.2.0/db_1/sysman/lib32/libnmesched.a /opt/app/oracle/prod
INFO: uct/10.2.0/db_1/sysman/lib32/libnmectl.a /opt/app/oracle/product/10.2.0/db_1/sysman/lib32/libnmejc.a /opt/app/oracle/product/10.2.0/db_1/sysman/lib32/libnmej.a -L/opt/app/oracle/product/10.2.0/db_1/jdk/jre/lib/PA_RISC2.0/hotspot -L/opt/app/oracle/product/10.2.0/db_1/jdk/jre/lib/PA_RISC2.0 -ljava -ljvm /opt/app/oracle/product/10.2.0/db_1/sysman/lib32/libnmeclumgr.a /opt/app/oracle/product/10.2.0/db_1/sysman/lib32/libnmecluster.a /opt/app/oracle/product/10.2.0/db_1/sysman/lib32/libnmexml.a -lxml10 -lcore
INFO: 10 -lnls10 -lcore10 -lnls10 -lcore10 -lunls10 -lclntsh -lnnz10 -lpthread -lnsl -lm `cat /opt/app/oracle/product/10.2.0/db_1/lib32/sysliblist` -lm -lpthread
INFO: ld:
INFO: Can't fi
INFO: n
INFO: d librar
INFO: y
INFO: : "jvm"
INFO:
INFO: *** Error exit code 1
INFO:
Stop.
INFO: *** Error exit code 1
INFO:
Stop.
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'agent nmo nmb emsubagent' of makefile '/opt/app/oracle/product/10.2.0/db_1/sysman/lib/ins_sysman.mk'. See '/opt/app/oracle/oraInventory/logs/installActions2005-11-16_10-37-35AM.log' for details.
Exception Severity: 1
Can anyone help?
regards
César.-Did you ever figure this problem out. I am experiencing the same thing.
-
Error in invoking target 'agent nmhs' of makefile - during 11g Installation
Hi guys~
I've just installed 11g (x64) on Fedora 13 (x64)
but during the installation there was an error.
Error in invoking target 'agent nmhs' of makefile
*'/u01/app/.../sysman/lib/ins_emagent.mk'*
This is the log file
[http://lyh913.tistory.com/attachment/[email protected]]
When oracle checked prerequisite packages, there was 8 failed packages such as libaio(i386), libgcc(i386) etc. I installed all of them (i686) with yum, but failed status didn't change. so I ignore them.
And then Error in invoking target 'agent nmhs' of makefile occured
Acturally I was able to excute sqlplus successfully but I'm curious that it is okay with this error.
I think there gonna be a problem sooner or later.
Is there anybody who can help me out? Please~ :-)
Anyway thanks for reading and sorry for my poor English(English isn't my mother tongue)Satish Kandi wrote:
The pre-requisite check has to succeed for the setup to complete successfully (with exceptions).
Have you tried installing the packages without yum?Thank you Satish Kandi~
I tried to download rpm packages and install them after your reply.
But Fedora said that they are already installed.
Failed prerequisite packages were
libaio-0.3.105, compat-libstdc++-33-3.2.3, libaio-devel-0.3.105, libgcc-3.4.6
libstdc++-3.46, unixODBC-2.2.11, unixODBC-devel-2.2.11, pdksh-5.2.14
And I've got these packages.
[root@localhost ~]# rpm -qa | grep i686
nss-softokn-freebl-3.12.4-17.fc13.i686
libtool-ltdl-2.2.6-20.fc13.i686
numactl-devel-2.0.3-8.fc13.i686
libgcc-4.4.4-2.fc13.i686
ksh-20100309-3.fc13.i686
compat-libstdc++-33-3.2.3-68.i686
readline-6.1-2.fc13.i686
libaio-devel-0.3.109-2.fc13.i686
libstdc++-4.4.4-2.fc13.i686
unixODBC-2.2.14-11.fc13.i686
numactl-2.0.3-8.fc13.i686
libaio-0.3.109-2.fc13.i686
unixODBC-devel-2.2.14-11.fc13.i686
glibc-2.12-1.i686
ncurses-libs-5.7-7.20100130.fc13.i686
At first 'glibc(it requires i686)' was failed status but after I installed glibc-2.12-1.i686, it became succeed.
The other packages require i386. Does this mean I should install i386 packages?
Edited by: user10406944 on 2010. 6. 1 오전 3:52
Edited by: user10406944 on 2010. 6. 1 오전 3:52 -
Installation error in invoking target 'agent nmhs'
Dear All,
I am new to this forum and I would like to inquire about the reasons behind a specific installation error of Oracle 11gR2 on Fedora 13 and the way to fix it. The error led to a weired behavior for the EM. I am going to explain everything precisely to flap the correspondence time so please please please bare with me.
I have followed precisely all the pre-requisites for preparing the installation environment (Fedora 13 Linux OS) by following the instructions in the manual that comes on the source installation Disk-1of Oracle 11g R2, like assigning the environment variables, setting kernel parameters, installation of all the required and necessary packages, creating the necessary directories and changing the owner ship, in addition to creation the user 'oracle' and the necessary groups. This installation ends up with a successful working database that can be accessed using sqlplus locally and remotely from another machine. My EM also worked but for a limited period of time for only about 10 to 15 min then after that I cannot access it due to a problem in the agent background process or daemon that is resulted from the error happened during the installation, and need to restart my machine. Here is what happened.
My installation is a stand alone database (database control / console database). Everything went smoothly during the installation except the following error that I couldn't get rid of or fix it, and I just continued the installation by clicking on the continue button of the OUI alert window. The error message on the alert window is:
Error in invoking target 'agent nmhs' of makefile '/u01/app/oracle/product/11.2.0/dbhome_1/sysman/lib/ins_emagent.mk'. See '/u01/app/oraInventory/logs/installActions2010-06-24_03-22-15PM.log' for details.
and here is the contenets (error part) of the installActions2010-06-24_03-22-15PM.log file
INFO: /usr/bin/ld: /u01/app/oracle/product/carried(nmectlt.o): undefined reference to symbol 'B_DestroyKeyObject'
*/usr/bin/ld: note: 'B_DestroyKeyObject' is defined in DSO /u01/app/oracle/product/11.2.0/dbhome_1/lib/libnnz11.so so try adding it to the linker command line*
*/u01/app/oracle/product/11.2.0/dbhome_1/lib/libnnz11.so: could not read symbols: Invalid operation*
INFO: collect2: ld returned 1 exit status
*INFO: make[1]: --- [u01/app/oracle/product/carried] Error 1*
INFO: make[1]: Leaving directory `/u01/app/oracle/product/carried'
*INFO: make: --- [emdctl] Error 2*
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'agent nmhs' of makefile '/u01/app/oracle/product/11.2.0/dbhome_1/sysman/lib/ins_emagent.mk'. See '/u01/app/oraInventory/logs/installActions2010-06-24_03-22-15PM.log' for details.
Exception Severity: 1
INFO: Calling Action unixActions10.2.0.3.0 ; make
registerOnly = false
installMakePath = /usr/bin/make
installMakeFileName = /u01/app/oracle/product/11.2.0/dbhome_1/rdbms/lib/ins_rdbms.mk
installTarget = all_no_orcl
undoMakeFileName =
installArguments = ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1
logFile = /u01/app/oracle/product/11.2.0/dbhome_1/install/make.log
undoTarget =
progMsg = Linking RDBMS Executables
After all the above, I am going to explain here how this error affected the EM. Here is the output of starting the dbconsole:
$ emctl start dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
http://bassam-desktop:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control .... started.
Logs are generated in directory /u01/app/oracle/product/carried-desktop_orcl/sysman/log
and here is the output of the status of the dbconsole
$ emctl status dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
http://bassam-desktop:1158/em/console/aboutApplication
EM Daemon is not running.
Logs are generated in directory /u01/app/oracle/product/carried-desktop_orcl/sysman/log
notice the EM Daemon (agent background process) is not running
Becuase of this error, the actual status of the database is not shown up in the EM. For example, if I try to startup my database through the EM, it starts successfully, but its status will not be shown, same thing happens for the listener. Clicking the View Details link in the EM after starting up the database shows up the following:
SQL*Plus: Release 11.2.0.1.0 Production on Sat Jun 26 03:43:36 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
SQL> Connected to an idle instance.
SQL> SQL> ORACLE instance started.
Total System Global Area 1489829888 bytes
Fixed Size 1336624 bytes
Variable Size 922749648 bytes
Database Buffers 553648128 bytes
Redo Buffers 12095488 bytes
Database mounted.
Database opened.
SQL> Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Agent is Not Running
again notice the last line of the message Agent is not running.
After all the above, I beleive that the installation error is the cause of all that. I would appreciate it if you could help me solving this problem. Thanks.
Bassam A. Al-KhaffafHi,
I have successfully installed Oracle 11g R2 after some manual intervention to solve this linker error.
The linker error actually gave the useful hint to solve this problem:
INFO: /usr/bin/ld: /home/akos/app/akos/product/11.2.0/dbhome_1/sysman/lib//libnmectl.a(nmectlt.o): undefined reference to symbol 'B_DestroyKeyObject'
/usr/bin/ld: note: 'B_DestroyKeyObject' is defined in DSO /home/akos/app/akos/product/11.2.0/dbhome_1/lib/libnnz11.so so try adding it to the linker command line
/home/akos/app/akos/product/11.2.0/dbhome_1/lib/libnnz11.so: could not read symbols: Invalid operation
collect2: ld returned 1 exit status
This means that the gcc linker phase lacked an option for "-lnnz11". I run "make agent nmhs" manually,
so the last command that gave an error can be copy&pasted to the command line. Adding "-lnnz11"
after "-lcore11" to the command made it run successfully, and also re-running "make agent nmhs"
on the command line didn't fail now. Then I chose the "Retry" button in the installer GUI and it proceeded.
This change in the Fedora 13 linker was announced at
http://docs.fedoraproject.org/en-US/Fedora/13/html/Release_Notes/sect-Release_Notes-The_GCC_Compiler_Collection.html
In Fedora 12 and earlier it was allowed to an app with library A and the app was able to use symbols
from every other libraries (B, C, ...) that library A was linked with. In Fedora 13 this is not allowed anymore,
your app needs to be linked explicitely with library B, C, etc.
Later, there was another problem with SELinux not allowing text relocation in .../product/11.2.0/dbhome_1/lib/libclntsh.so.11.1
which was solved by running:
chcon -t textrel_shlib_t '.../product/11.2.0/dbhome_1/lib/libclntsh.so.11.1'
and re-running configuration of "Oracle Net Configuration Assistant". This allows keeping SELinux on.
After that, installation and setup of the first database succeeded on Fedora 13. -
'error in invoking target 'client_sharedlib' of makefile' for help
I am installing oracle 10g(10202_database_soxl86)on solaris 10 (sol-10-u10-ga2-x86-dvd.iso) throgh VMware workstation 7.1.4
I fellowing the steps below:
1、 # pkgadd -R /cdrom/Solaris_10/Product SUNWarc SUNWbtool SUNWhea SUNWlibm SUNWlibms SUNWsprot SUNWtoo SUNWi1of SUNWi1cs SUNWi15cs SUNWxwfnt SUNWgcc
2、 # mkdir -p /export/home/app/oracle
# chown -R oracle:oinstall /export/home/app/oracle
3、 # groupadd oinstall
# groupadd dba
# useradd -g oinstall -G dba -s /usr/bin/bash -d /export/home/app/oracle oracle
# passwd oracle
4、$vi .profile
export ORACLE_BASE=/export/home/app
export ORACLE_HOME=$ORACLE_BASE/oracle
export ORACLE_SID=sun
export PATH=$ORACLE_HOME/bin:$PATH
export DISPLAY=192.168.0.1:0.0
stty erase ^h
$ env | grep ORA
results: ORACLE_BASE=/export/home/app
ORACLE_HOME=/export/home/app/oracle
ORACLE_SID=sun
$ env | grep DIS
results:DISPLAY=192.168.0.1:0.0
5、# uname -a
result:SunOS solaris10 5.10 Generic_147441-01 i86pc i386 i86pc
# isainfo -v
result:32-bit i386 applications
pclmulqdq aes sse4.2 sse4.1 ssse3 popcnt tscp sse3 sse2 sse fxsr mmx
cmov sep cx8 tsc fpu
6、# df -k
Filesystem kbytes used avail capacity Mounted on
swap 2437932 112 2437820 1% /tmp
7 、# cd /tmp
# unzip / 10202_database_soxl86.zip
# chown -R oracle:oinstall database/
8、 # su - oracle
$ cd /tmp/database
$ ./runInstaller
Error information:
1、error in invoking target 'client_sharedlib' of makefile
2、Error in invoking target 'relink' of makefile
3、Error in invoking target 'ioracle' of makefile '/export/home/oracle/product/10.2.2/rdbms/lib/ins_rdbms.mk'.
4、Error in invoking target 'nnfgt.o mkldflags client_sharedlib' of makefile '/export/home/oracle/product/10.2.2/network/lib/ins_net_client.mk'
5、Error in invoking target 'install' of makefile '/export/home/oracle/product/10.2.2/sqlplus/lib/ins_sqlplus.mk'.
6、Error in invoking target 'irman' of makefile '/export/home/oracle/product/10.2.2/rdbms/lib/ins_rdbms.mk'.
7、Error in invoking target 'install' of makefile '/export/home/oracle/product/10.2.2/network/lib/ins_net_client.mk'.
Error in invoking target 'install' of makefile '/export/home/oracle/product/10.2.2/plsql/lib/ins_plsql.mk'.
8、Error in invoking target 'ioklist iokinit iokdstry' of makefile '/export/home/oracle/product/10.2.2/network/lib/ins_nau.mk'.
9、Error in invoking target 'utilities ctx_on' of makefile '/export/home/oracle/product/10.2.2/rdbms/lib/ins_rdbms.mk'.
10、Error in invoking target 'agent nmo nmb' of makefile '/export/home/oracle/product/10.2.2/sysman/lib/ins_sysman.mk'.
11、Error in invoking target 'clientonlyinstall' of makefile '/export/home/oracle/product/10.2.2/ldap/lib/ins_ldap.mk'.
12、Error in invoking target 'install' of makefile '/export/home/oracle/product/10.2.2/srvm/lib/ins_srvm.mk'.
13、Error in invoking target 'racg_install' of makefile '/export/home/oracle/product/10.2.2/racg/lib/ins_has.mk'.
14、Error in invoking target 'install' of makefile '/export/home/oracle/product/10.2.2/network/lib/ins_net_server.mk'.
15、Error in invoking target 'all_no_orcl ipc_g' of makefile '/export/home/oracle/product/10.2.2/rdbms/lib/ins_rdbms.mk'.
16、Error in invoking target 'collector' of makefile '/export/home/oracle/product/10.2.2/sysman/lib/ins_emdb.mk'.
details:
Checking installer requirements...
INFO:
INFO: Checking operating
system version: must be 5.10. Actual 5.10
INFO:
Passed
INFO:
INFO: Checking Temp space: must be
greater than 250 MB. Actual 2403 MB Passed
INFO: Checking swap
space: must be greater than 500 MB. Actual 2805 MB Passed
INFO:
Checking monitor: must be configured to display at least 256 colors.
Actual 16777216 Passed
INFO:
INFO: All installer requirements
met.
Exception String: Error
in invoking target 'client_sharedlib' of makefile
'/export/home/oracle/product/10.2.2/network/lib/ins_net_client.mk'.
See '/export/home/oracle/oraInventory/logs/installActions2011-11-
04_08-21-57PM.log' for details.
Exception Severity: 1
INFO: Exception
handling set to prompt user with options to Retry Ignore
User
Choice: Ignore
INFO: 11/4/11 8:37:54 PM CST: Starting install Link
Phase of component Enterprise Manager Agent DB
INFO: 11/4/11 8:37:54
PM CST: Starting install Link Phase of component Enterprise Manager
Common Files
INFO: 11/4/11 8:37:54 PM CST: Starting install Link
Phase of component Oracle Display Fonts
INFO: 11/4/11 8:37:54 PM CST:
Starting install Link Phase of component Oracle Extended Windowing
Toolkit
INFO: 11/4/11 8:37:54 PM CST: Starting install Link Phase of
component Oracle UIX
INFO: 11/4/11 8:37:54 PM CST: Starting install
Link Phase of component SQL*Plus Required Support Files
INFO: 11/4/11
8:37:54 PM CST: Starting install Link Phase of component DBJAVA
Required Support Files
INFO: 11/4/11 8:37:54 PM CST: Starting install
Link Phase of component Oracle OLAP RDBMS Files
INFO: Calling Action
unixActions10.2.0.1.0 registerForMake
installMakePath =
/usr/ccs/bin/make
installMakeFileName =
/export/home/oracle/product/10.2.2/rdbms/lib/ins_rdbms.mk
installTarget = ioracle
installArguments =
ORACLE_HOME=/export/home/oracle/product/10.2.2
undoMakeFileName =
/export/home/oracle/product/10.2.2/rdbms/lib/ins_rdbms.mk
undoTarget = ioracle
undoArguments =
ORACLE_HOME=/export/home/oracle/product/10.2.2
logFile =
/export/home/oracle/product/10.2.2/install/make.log
progMsg =
Unlinking oracle
INFO: Calling Action unixActions10.2.0.1.0 make
installMakePath = /usr/ccs/bin/make
installMakeFileName =
/export/home/oracle/product/10.2.2/rdbms/lib/ins_rdbms.mk
installTarget = olap_on
installArguments =
ORACLE_HOME=/export/home/oracle/product/10.2.2
undoMakeFileName =
/export/home/oracle/product/10.2.2/rdbms/lib/ins_rdbms.mk
undoTarget = olap_off
undoArguments =
ORACLE_HOME=/export/home/oracle/product/10.2.2
logFile =
/export/home/oracle/product/10.2.2/install/make.log
progMsg =
null
INFO: The output of this make operation is also available at:
'/export/home/oracle/product/10.2.2/install/make.log'
INFO:
INFO:
Start output from spawned process:
INFO:
INFO:
INFO: /usr/ccs/bin/ar d
/export/home/oracle/product/10.2.2/rdbms/lib/libknlopt.a xsnoolap.o
INFO: /usr/ccs/bin/ar cr
/export/home/oracle/product/10.2.2/rdbms/lib/libknlopt.a
/export/home/oracle/product/10.2.2/rdbms/lib/xsyeolap.o
INFO: End
output from spawned process.
INFO:
INFO: Calling Action
unixActions10.2.0.1.0 registerForMake
installMakePath =
/usr/ccs/bin/make
installMakeFileName =
/export/home/oracle/product/10.2.2/rdbms/lib/ins_rdbms.mk
installTarget = ioracle
installArguments =
ORACLE_HOME=/export/home/oracle/product/10.2.2
undoMakeFileName =
/export/home/oracle/product/10.2.2/rdbms/lib/ins_rdbms.mk
undoTarget = ioracle
undoArguments =
ORACLE_HOME=/export/home/oracle/product/10.2.2
logFile =
/export/home/oracle/product/10.2.2/install/make.log
progMsg =
Linking Oracle
INFO: 11/4/11 8:37:54 PM CST: Starting install Link
Phase of component Oracle OLAP API
INFO: 11/4/11 8:37:54 PM CST:
Starting install Link Phase of component XDK Required Support Files
INFO: 11/4/11 8:37:54 PM CST: Starting install Link Phase of
component RDBMS Required Support Files for Instant Client
INFO:
11/4/11 8:37:54 PM CST: Starting install Link Phase of component
RDBMS Required Support Files
INFO: 11/4/11 8:37:54 PM CST: Starting
install Link Phase of component Oracle JFC Extended Windowing
Toolkit
INFO: 11/4/11 8:37:54 PM CST: Starting install Link Phase of
component Agent Required Support Files
INFO: 11/4/11 8:37:54 PM CST:
Starting install Link Phase of component Parser Generator Required
Support Files
INFO: 11/4/11 8:37:54 PM CST: Starting install Link
Phase of component Sample Schema Data
INFO: 11/4/11 8:37:54 PM CST:
Starting install Link Phase of component Oracle Starter Database
INFO: 11/4/11 8:37:54 PM CST: Starting install Link Phase of
component Oracle Message Gateway Common Files
INFO: 11/4/11 8:37:54
PM CST: Starting install Link Phase of component XML Parser for
Oracle JVM
INFO: 11/4/11 8:37:54 PM CST: Starting install Link Phase
of component Precompiler Required Support Files
INFO: 11/4/11 8:37:54
PM CST: Starting install Link Phase of component XML Parser for
Java
INFO: 11/4/11 8:37:54 PM CST: Starting install Link Phase of
component Oracle Help for the Web
INFO: 11/4/11 8:37:54 PM CST:
Starting install Link Phase of component Oracle Ice Browser
INFO:
11/4/11 8:37:54 PM CST: Starting install Link Phase of component
Enterprise Manager Baseline
INFO: 11/4/11 8:37:54 PM CST: Starting
install Link Phase of component Oracle Data Mining RDBMS Files
INFO:
Calling Action unixActions10.2.0.1.0 registerForMake
installMakePath = /usr/ccs/bin/make
installMakeFileName =
/export/home/oracle/product/10.2.2/rdbms/lib/ins_rdbms.mk
installTarget = ioracle
installArguments =
ORACLE_HOME=/export/home/oracle/product/10.2.2
undoMakeFileName =
/export/home/oracle/product/10.2.2/rdbms/lib/ins_rdbms.mk
undoTarget = ioracle
undoArguments =
ORACLE_HOME=/export/home/oracle/product/10.2.2
logFile =
/export/home/oracle/product/10.2.2/install/make.log
progMsg =
Unlinking oracle
INFO: Calling Action unixActions10.2.0.1.0 make
installMakePath = /usr/ccs/bin/make
installMakeFileName =
/export/home/oracle/product/10.2.2/rdbms/lib/ins_rdbms.mk
installTarget = dm_on
installArguments =
ORACLE_HOME=/export/home/oracle/product/10.2.2
undoMakeFileName =
/export/home/oracle/product/10.2.2/rdbms/lib/ins_rdbms.mk
undoTarget = dm_off
undoArguments =
ORACLE_HOME=/export/home/oracle/product/10.2.2
logFile =
/export/home/oracle/product/10.2.2/install/make.log
progMsg =
Linking Label Security Option
INFO: The output of this make operation
is also available at:
'/export/home/oracle/product/10.2.2/install/make.log'
INFO:
INFO:
Start output from spawned process:
INFO:
INFO:
INFO: /usr/ccs/bin/ar cr
/export/home/oracle/product/10.2.2/rdbms/lib/libknlopt.a
/export/home/oracle/product/10.2.2/rdbms/lib/dmndmse.o
INFO:
/usr/ccs/bin/ar cr
/export/home/oracle/product/10.2.2/rdbms/lib/libknlopt.a
/export/home/oracle/product/10.2.2/rdbms/lib/dmwdm.o
INFO: End
output from spawned process.
INFO:
INFO: Calling Action
unixActions10.2.0.1.0 registerForMake
installMakePath =
/usr/ccs/bin/make
installMakeFileName =
/export/home/oracle/product/10.2.2/rdbms/lib/ins_rdbms.mk
installTarget = ioracle
installArguments =
ORACLE_HOME=/export/home/oracle/product/10.2.2
undoMakeFileName =
/export/home/oracle/product/10.2.2/rdbms/lib/ins_rdbms.mk
undoTarget = ioracle
undoArguments =
ORACLE_HOME=/export/home/oracle/product/10.2.2
logFile =
/export/home/oracle/product/10.2.2/install/make.log
progMsg =
Unlinking oracle
INFO: 11/4/11 8:37:55 PM CST: Starting install Link
Phase of component Oracle Database 10g interMedia Files
INFO: 11/4/11
8:37:55 PM CST: Starting install Link Phase of component Oracle
interMedia Java Advanced Imaging
INFO: 11/4/11 8:37:55 PM CST:
Starting install Link Phase of component SQLJ Runtime
INFO: 11/4/11
8:37:55 PM CST: Starting install Link Phase of component Oracle
interMedia Annotator
INFO: 11/4/11 8:37:55 PM CST: Starting install
Link Phase of component Oracle JDBC/OCI Instant Client
INFO: 11/4/11
8:37:55 PM CST: Starting install Link Phase of component Oracle
interMedia Locator RDBMS Files
INFO: Calling Action
unixActions10.2.0.1.0 registerForMake
installMakePath =
/usr/ccs/bin/make
installMakeFileName =
/export/home/oracle/product/10.2.2/rdbms/lib/ins_rdbms.mk
installTarget = ioracle
installArguments =
ORACLE_HOME=/export/home/oracle/product/10.2.2
undoMakeFileName =
/export/home/oracle/product/10.2.2/rdbms/lib/ins_rdbms.mk
undoTarget = ioracle
undoArguments =
ORACLE_HOME=/export/home/oracle/product/10.2.2
logFile =
/export/home/oracle/product/10.2.2/install/make.log
progMsg =
Linking oracle
INFO: Calling Action unixActions10.2.0.1.0 make
installMakePath = /usr/ccs/bin/make
installMakeFileName =
/export/home/oracle/product/10.2.2/rdbms/lib/ins_rdbms.mk
installTarget = sdo_on
installArguments =
ORACLE_HOME=/export/home/oracle/product/10.2.2
undoMakeFileName =
/export/home/oracle/product/10.2.2/rdbms/lib/ins_rdbms.mk
undoTarget = sdo_off
undoArguments =
ORACLE_HOME=/export/home/oracle/product/10.2.2
logFile =
/export/home/oracle/product/10.2.2/install/make.log
progMsg =
Linking sdo options
INFO: The output of this make operation is also
available at: '/export/home/oracle/product/10.2.2/install/make.log'
INFO:
INFO: Start output from spawned process:
INFO:
INFO:
INFO: /usr/ccs/bin/ar cr
/export/home/oracle/product/10.2.2/rdbms/lib/libknlopt.a
/export/home/oracle/product/10.2.2/rdbms/lib/kxmwsd.o
INFO: End
output from spawned process.
INFO:
INFO: Calling Action
unixActions10.2.0.1.0 registerForMake
installMakePath =
/usr/ccs/bin/make
installMakeFileName =
/export/home/oracle/product/10.2.2/rdbms/lib/ins_rdbms.mk
installTarget = ioracle
installArguments =
ORACLE_HOME=/export/home/oracle/product/10.2.2
undoMakeFileName =
/export/home/oracle/product/10.2.2/rdbms/lib/ins_rdbms.mk
undoTarget = ioracle
undoArguments =
ORACLE_HOME=/export/home/oracle/product/10.2.2
logFile =
/export/home/oracle/product/10.2.2/install/make.log
progMsg =
Linking Oracle
INFO: 11/4/11 8:37:56 PM CST: Starting install Link
Phase of component Platform Required Support Files
INFO: 11/4/11
8:37:56 PM CST: Starting install Link Phase of component Oracle Core
Required Support Files
INFO: 11/4/11 8:37:56 PM CST: Starting install
Link Phase of component Database Workspace Manager
INFO: 11/4/11
8:37:56 PM CST: Starting install Link Phase of component Oracle
Containers for Java
INFO: 11/4/11 8:37:56 PM CST: Starting install
Link Phase of component Oracle Help For Java
INFO: 11/4/11 8:37:56 PM
CST: Starting install Link Phase of component JDBC Common Files
INFO:
11/4/11 8:37:56 PM CST: Starting install Link Phase of component
Perl Interpreter
INFO: 11/4/11 8:37:56 PM CST: Starting install Link
Phase of component Oracle Code Editor
INFO: 11/4/11 8:37:56 PM CST:
Starting install Link Phase of component Oracle Notification
Service
INFO: 11/4/11 8:37:56 PM CST: Starting install Link Phase of
component Oracle interMedia Client Option
INFO: 11/4/11 8:37:56 PM
CST: Starting install Link Phase of component Oracle JDBC Thin
Driver for JDK 1.2
INFO: 11/4/11 8:37:56 PM CST: Starting install
Link Phase of component Oracle JDBC Thin Driver for JDK 1.4
INFO:
11/4/11 8:37:56 PM CST: Starting install Link Phase of component
Enterprise Manager plugin Common Files
INFO: 11/4/11 8:37:56 PM CST:
Starting install Link Phase of component LDAP Required Support
Files
INFO: 11/4/11 8:37:56 PM CST: Starting install Link Phase of
component Character Set Migration Utility
INFO: 11/4/11 8:37:56 PM
CST: Starting install Link Phase of component Oracle Locale Builder
INFO: 11/4/11 8:37:56 PM CST: Starting install Link Phase of
component PL/SQL Embedded Gateway
INFO: 11/4/11 8:37:56 PM CST:
Starting install Link Phase of component OLAP SQL Scripts
INFO:
11/4/11 8:37:56 PM CST: Starting install Link Phase of component
Database SQL Scripts
INFO: 11/4/11 8:37:56 PM CST: Starting install
Link Phase of component Oracle Globalization Support
INFO: 11/4/11
8:37:56 PM CST: Starting install Link Phase of component Required
Support Files
INFO: 11/4/11 8:37:56 PM CST: Starting install Link
Phase of component Secure Socket Layer
INFO: Calling Action
unixActions10.2.0.1.0 registerForMake
installMakePath =
/usr/ccs/bin/make
installMakeFileName =
/export/home/oracle/product/10.2.2/network/lib/ins_net_client.mk
installTarget = nnfgt.o
installArguments = ORACLE_HOME
=/export/home/oracle/product/10.2.2
undoMakeFileName = null
undoTarget = null
undoArguments = null
logFile =
/export/home/oracle/product/10.2.2/install/make.log
progMsg =
Linking nnfgt
INFO: Calling Action unixActions10.2.0.1.0
registerForMake
installMakePath = /usr/ccs/bin/make
installMakeFileName =
/export/home/oracle/product/10.2.2/network/lib/ins_net_client.mk
installTarget = mkldflags
installArguments =
ORACLE_HOME=/export/home/oracle/product/10.2.2
undoMakeFileName =
null
undoTarget = null
undoArguments = null
logFile =
/export/home/oracle/product/10.2.2/install/make.log
progMsg =
Linking ldflags
INFO: Calling Action unixActions10.2.0.1.0
registerForMake
installMakePath = /usr/ccs/bin/make
installMakeFileName =
/export/home/oracle/product/10.2.2/network/lib/ins_net_client.mk
installTarget = client_sharedlib
installArguments =
ORACLE_HOME=/export/home/oracle/product/10.2.2
undoMakeFileName =
null
undoTarget = null
undoArguments = null
logFile =
/export/home/oracle/product/10.2.2/install/make.log
progMsg =
Building client shared library
INFO: 11/4/11 8:37:56 PM CST: Starting
install Link Phase of component Oracle Database User Interface
INFO:
11/4/11 8:37:56 PM CST: Starting install Link Phase of component
Enterprise Manager Minimal Integration
INFO: 11/4/11 8:37:56 PM CST:
Starting install Link Phase of component Oracle Wallet Manager
INFO:
11/4/11 8:37:56 PM CST: Starting install Link Phase of component
Oracle Clusterware RDBMS Files
INFO: 11/4/11 8:37:56 PM CST: Starting
install Link Phase of component Oracle RAC Required Support Files-
HAS
INFO: 11/4/11 8:37:56 PM CST: Starting install Link Phase of
component SQL*Plus
INFO: Calling Action unixActions10.2.0.1.0
registerForMake
installMakePath = /usr/ccs/bin/make
installMakeFileName =
/export/home/oracle/product/10.2.2/sqlplus/lib/ins_sqlplus.mk
installTarget = install
installArguments =
ORACLE_HOME=/export/home/oracle/product/10.2.2
undoMakeFileName =
null
undoTarget = null
undoArguments = null
logFile =
/export/home/oracle/product/10.2.2/install/make.log
progMsg =
Linking SQLPLUS executables
INFO: 11/4/11 8:37:56 PM CST: Starting
install Link Phase of component Enterprise Manager plugin Common
Files
INFO: 11/4/11 8:37:56 PM CST: Starting install Link Phase of
component iSQL*Plus
INFO: 11/4/11 8:37:56 PM CST: Starting install
Link Phase of component Oracle Recovery Manager
INFO: Calling Action
unixActions10.2.0.1.0 registerForMake
installMakePath =
/usr/ccs/bin/make
installMakeFileName =
/export/home/oracle/product/10.2.2/rdbms/lib/ins_rdbms.mk
installTarget = irman
installArguments =
ORACLE_HOME=/export/home/oracle/product/10.2.2
undoMakeFileName =
null
undoTarget = null
undoArguments = null
logFile =
/export/home/oracle/product/10.2.2/install/make.log
progMsg =
Linking RMAN utility
INFO: 11/4/11 8:37:56 PM CST: Starting install
Link Phase of component HAS Common Files
INFO: 11/4/11 8:37:56 PM
CST: Starting install Link Phase of component Precompiler Common
Files
INFO: Calling Action unixActions10.2.0.1.0 make
installMakePath = /usr/ccs/bin/make
installMakeFileName =
/export/home/oracle/product/10.2.2/precomp/lib/ins_precomp.mk
installTarget = links
installArguments =
ORACLE_HOME=/export/home/oracle/product/10.2.2
undoMakeFileName =
/export/home/oracle/product/10.2.2/precomp/lib/ins_precomp.mk
undoTarget = rmlinks
undoArguments =
ORACLE_HOME=/export/home/oracle/product/10.2.2
logFile =
/export/home/oracle/product/10.2.2/install/make.log
progMsg =
Linking links
INFO: The output of this make operation is also
available at: '/export/home/oracle/product/10.2.2/install/make.log'
INFO:
INFO: Start output from spawned process:
INFO:
INFO:
INFO: (cd
/export/home/oracle/product/10.2.2/precomp/public ; rm -f SQLCA.H)
INFO: (cd /export/home/oracle/product/10.2.2/precomp/public ; rm -f
ORACA.H)
INFO: (cd /export/home/oracle/product/10.2.2/precomp/public
; rm -f SQLDA.H)
INFO: (cd
/export/home/oracle/product/10.2.2/precomp/public ; rm -f SQLCA.COB)
INFO: (cd /export/home/oracle/product/10.2.2/precomp/public ; rm -f
ORACA.COB)
INFO: (cd
/export/home/oracle/product/10.2.2/precomp/public ; rm -f SQLCA.FOR)
INFO: (cd /export/home/oracle/product/10.2.2/precomp/public ; rm -f
ORACA.FOR)
INFO: (cd
/export/home/oracle/product/10.2.2/precomp/public ; rm -f
BNDDSC.FOR)
INFO: (cd
/export/home/oracle/product/10.2.2/precomp/public ; rm -f
SELDSC.FOR)
INFO: (cd
/export/home/oracle/product/10.2.2/precomp/public ; ln -s sqlca.h
SQLCA.H)
INFO: (cd /export/home/oracle/product/10.2.2/precomp/public
; ln -s oraca.h ORACA.H)
INFO: (cd
/export/home/oracle/product/10.2.2/precomp/public ; ln -s sqlda.h
SQLDA.H)
INFO: (cd /export/home/oracle/product/10.2.2/precomp/public
; ln -s sqlca.cob SQLCA.COB)
INFO: (cd
/export/home/oracle/product/10.2.2/precomp/public ; ln -s oraca.cob
ORACA.COB)
INFO: (cd
/export/home/oracle/product/10.2.2/precomp/public ; ln -s sqlca.for
SQLCA.FOR)
INFO: (cd
/export/home/oracle/product/10.2.2/precomp/public ; ln -s oraca.for
ORACA.FOR)
INFO: (cd
/export/home/oracle/product/10.2.2/precomp/public ; ln -s bnddsc.for
BNDDSC.FOR)
INFO: (cd
/export/home/oracle/product/10.2.2/precomp/public ; ln -s seldsc.for
SELDSC.FOR)
INFO: End output from spawned process.
INFO:
INFO: Calling Action
unixActions10.2.0.1.0 make
installMakePath = /usr/ccs/bin/make
installMakeFileName =
/export/home/oracle/product/10.2.2/precomp/lib/ins_precomp.mk
installTarget = relink
installArguments =
ORACLE_HOME=/export/home/oracle/product/10.2.2,EXENAME=proc
undoMakeFileName = null
undoTarget = null
undoArguments = null
logFile = /export/home/oracle/product/10.2.2/install/make.log
progMsg = Linking proc
INFO: The output of this make operation is
also available at:
'/export/home/oracle/product/10.2.2/install/make.log'
INFO:
INFO:
Start output from spawned process:
INFO:
INFO:
INFO: Linking
/export/home/oracle/product/10.2.2/precomp/lib/proc
INFO: ld:
INFO:
fatal:
INFO: library -l
INFO: clntsh
INFO: : not found
INFO:
INFO: ld:
INFO: fatal:
INFO: file processing errors. No output written to
INFO: /export/home/oracle/product/10.2.2/precomp/lib/proc
INFO:
INFO:
*** Error code 1
The following command caused the error:
echo "Linking
/export/home/oracle/product/10.2.2/precomp/lib/proc"; \
rm -f
/export/home/oracle/product/10.2.2/precomp/lib/proc; \
/usr/ccs/bin/ld -o
/export/home/oracle/product/10.2.2/precomp/lib/proc -
L/export/home/oracle/product/10.2.2/precomp/lib/ -
L/export/home/oracle/product/10.2.2/lib/ -dy
/export/home/oracle/product/10.2.2/lib/prod/lib/crti.o
/export/home/oracle/product/10.2.2/lib/prod/lib/crt1.o
/export/home/oracle/product/10.2.2/lib/s0m
INFO: ain.o
/export/home/oracle/product/10.2.2/precomp/lib/pdc.o
/export/home/oracle/product/10.2.2/precomp/lib/pds.o
/export/home/oracle/product/10.2.2/precomp/lib/libproc2.a
/export/home/oracle/product/10.2.2/lib/libslax10.a
/export/home/oracle/product/10.2.2/precomp/lib/libpgp.a -lpls10 -
lplp10 /export/home/oracle/product/10.2.2/lib/libplc10.a -lsnls10 -
lunls10 -lnls10
/export/home/oracle/product/10.2.2/rdbms/lib/kpudfo.o -lclntsh `cat
/export/home/oracle/product/10.2.2/lib/ldflags` -lnsslb10 -
lncrypt10
INFO: -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/export/home/oracle/product/10.2.2/lib/ldflags` -lnsslb10 -
lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -
lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lmm -lsnls10 -lnls10 -
lcore10 -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lxml10 -
lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat
/export/home/oracle/product/10.2.2/lib/ldflags` -lnsslb10 -
lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/export/home/oracle/product/1
INFO: 0.2.2/lib/ldflags` -lnsslb10
-lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -
lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lpls10 -lsnls10 -lnls10
-lcore10 -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lxml10 -
lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 -lclient10 -
lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lsnls10 -lnls10 -lcore10
-lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lxml10 -lcore10 -
lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat
/export/home/oracle/product/10.2.2/lib/sy
INFO: sliblist` -R
/opt/SUNWcluster/lib:/export/home/oracle/product/10.2.2/lib:/opt/ORC
Lcluster/lib/ -Y
P,:/opt/SUNWcluster/lib:/opt/ORCLcluster/lib/:/usr/ccs/lib:/usr/lib
-Qy -lc -lrt -laio -lposix4 -lm
/export/home/oracle/product/10.2.2/lib/prod/lib/crtn.o; \
/bin/chmod
755 /export/home/oracle/product/10.2.2/precomp/lib/proc
INFO: make:
Fatal error: Command failed for target
`/export/home/oracle/product/10.2.2/precomp/lib/proc'
INFO: End
output from spawned process.
INFO:
INFO: Exception thrown from
action: make
Exception Name: MakefileException895824 wrote:
I am installing oracle 10g(10202_database_soxl86)on solaris 10 (sol-10-u10-ga2-x86-dvd.iso) throgh VMware workstation 7.1.4
I fellowing the steps below:
1、 # pkgadd -R /cdrom/Solaris_10/Product SUNWarc SUNWbtool SUNWhea SUNWlibm SUNWlibms SUNWsprot SUNWtoo SUNWi1of SUNWi1cs SUNWi15cs SUNWxwfnt SUNWgcc
2、 # mkdir -p /export/home/app/oracle
# chown -R oracle:oinstall /export/home/app/oracle
3、 # groupadd oinstall
# groupadd dba
# useradd -g oinstall -G dba -s /usr/bin/bash -d /export/home/app/oracle oracle
# passwd oracle
4、$vi .profile
export ORACLE_BASE=/export/home/app
export ORACLE_HOME=$ORACLE_BASE/oracle
export ORACLE_SID=sun
export PATH=$ORACLE_HOME/bin:$PATH
export DISPLAY=192.168.0.1:0.0
stty erase ^h
$ env | grep ORA
results: ORACLE_BASE=/export/home/app
ORACLE_HOME=/export/home/app/oracle
ORACLE_SID=sun
$ env | grep DIS
results:DISPLAY=192.168.0.1:0.0
5、# uname -a
result:SunOS solaris10 5.10 Generic_147441-01 i86pc i386 i86pc
# isainfo -v
result:32-bit i386 applications
pclmulqdq aes sse4.2 sse4.1 ssse3 popcnt tscp sse3 sse2 sse fxsr mmx
cmov sep cx8 tsc fpu
6、# df -k
Filesystem kbytes used avail capacity Mounted on
swap 2437932 112 2437820 1% /tmp
7 、# cd /tmp
# unzip / 10202_database_soxl86.zip
# chown -R oracle:oinstall database/
8、 # su - oracleLook no further. You modified your .profile to set the environment, but you did that as root, then did an su to oracle. That oracle session never saw the environment changes (ORACLE_HOME, etc) you did to your (root) profile. All Oracle specific tasks should be done logged on as the oracle software owner - oracle. Once root made the necessary prereqs at the OS level (pkgadd, groupadd, useradd) you should have logged off as root and logged on as oracle, THEN proceeded to fix your .profile, etc., and run the installer. NEVER act as a dba while logged on as root. NEVER log on as root to do ANYTHING that does not REQUIRE root access.
$ cd /tmp/database
$ ./runInstaller
<snip> -
Hi,
I am trying to install Oracle 10.2.0.1(64 bit) on RHEL 4.0(2.6.9-5.ELsmp). When installation was on linking stage i got three error messages which are given below.
(1)Error in invoking target 'install' of makefile '/oracle/app/oracle/product/10.2.0/db_2/ctx/lib/ins_ctx.mk'.
(2)Error in invoking target 'agent nmo nmb' of makefile '/oracle/app/oracle/product/10.2.0/db_2/sysman/lib/ins_sysman.mk'.
(3)Error in invoking target 'all_no_orcl' of makefile '/oracle/app/oracle/product/10.2.0/db_2/rdbms/lib/ins_rdbms.mk'
Due to this errors, installation of Oracle was not successfull. Can you please tell me what is causing this errors?
I have followed all steps given on following link eventhough it is throwing these errors.
http://www.oracle.com/technology/pub/articles/smiley_10gdb_install.html#rhel4
Please help in this matter as soon as possible.
Regards,
RJ.
Message was edited by:
RJivMake sure you have followed all steps according to the platform's install guide and you have met all prerequisites (verify all required install packages and in case you have done so, don't skip the prerequisites warning). It could also be an issue with the 64 bit library path.
~ Madrid -
Error in Invoking target 'nmo' of makefile... on Oracle 11g to RHEL 5
Error in invoking target 'nmo' of makefile 'u01/app/oracle/product/11.2.0/dbhome_1/sysman/lib/ins_emagent.mk'. See '/u01/app/oracle/orainventory/logs/installActions2009-12-31_03-06-04.log' for details.
======================================================
INFO: Start output from spawned process:
INFO: ----------------------------------
INFO:
INFO: /u01/app/oracle/product/11.2.0/dbhome_1/sysman/lib/ins_emagent.mk:113:
INFO: warning: overriding commands for target `nmosudo'
/u01/app/oracle/product/11.2.0/dbhome_1/sysman/lib/ins_emagent.mk:52: warning: ignoring old commands for target `nmosudo'
INFO: make -f /u01/app/oracle/product/11.2.0/dbhome_1/sysman/lib/ins_emagent.mk relink_exe EXENAME=nmo
INFO: make[1]: Entering directory `/u01/app/oracle/product/11.2.0/dbhome_1/sysman/lib'
INFO: /u01/app/oracle/product/11.2.0/dbhome_1/sysman/lib/ins_emagent.mk:113:
INFO: warning: overriding commands for target `nmosudo'
INFO:
INFO: /u01/app/oracle/product/11.2.0/dbhome_1/sysman/lib/ins_emagent.mk:52:
INFO: warning: ignoring old commands for target `nmosudo'
INFO:
INFO: gcc -o /u01/app/oracle/product/11.2.0/dbhome_1/sysman/lib/nmo -L/u01/app/oracle/product/11.2.0/dbhome_1/lib/ -L/u01/app/oracle/product/11.2.0/dbhome_1/sysman/lib/ -L/u01/app/oracle/product/11.2.0/dbhome_1/lib/stubs/ `cat /u01/app/oracle/product/11.2.0/dbhome_1/lib/sysliblist` -lm `cat /u01/app/oracle/product/11.2.0/dbhome_1/lib/sysliblist` -ldl -lm -L/u01/app/oracle/product/11.2.0/dbhome_1/lib /u01/app/oracle/product/11.2.0/dbhome_1/sysman/lib/s0nmo.o /u01/app/oracle/product/11.2.0/dbhome_1/sysman/lib/libn
INFO: mo.a -lcrypt -ldl `cat /u01/app/oracle/product/11.2.0/dbhome_1/lib/sysliblist` -ldl -lm
INFO: /
INFO: usr/bin/ld: skipping incompatible /u01/app/oracle/product/11.2.0/dbhome_1/lib/stubs//libdl.so when
INFO: searching for -ldl
/usr/bin/ld: skipping incompatible /u01/app/oracle/product/11.2.0/dbhome_1/lib/stubs//libm.so when searching for -lm
/usr/bin/ld: skipping incompatible /u01/app/oracle/product/11.2.0/dbhome_1/lib/stubs//libpthread.so when searching for -lpthread
/usr/bin/ld: skipping incompatible /u01/app/oracle/product/11.2.0/dbhome_1/lib/stubs//libnsl.so when searching for -lnsl
/usr/bin/ld: skipping incompatible
INFO: /u01/app/oracle/product/11.2.0/dbhome_1/lib//libirc.a when searching for -lirc
/usr/bin/ld: skipping incompatible /u01/app/oracle/product/11.2.0/dbhome_1/lib/libirc.a when searching for -lirc
/usr/bin/ld: cannot find -lirc
INFO: collect2:
INFO: ld returned 1 exit status
INFO: make[1]:
INFO: *** [u01/app/oracle/product/11.2.0/dbhome_1/sysman/lib/nmo] Error 1
INFO:
INFO: make[1]: Leaving directory `/u01/app/oracle/product/11.2.0/dbhome_1/sysman/lib'
INFO: make: *** [nmo] Error 2
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'nmo' of makefile '/u01/app/oracle/product/11.2.0/dbhome_1/sysman/lib/ins_emagent.mk'. See '/u01/app/oracle/orainventory/logs/installActions2009-12-31_03-06-04PM.log' for details.
Exception Severity: 1
=============================================================
I would appreciate any help you all could provide. Thank you,
Eric
Edited by: user12262586 on Dec 31, 2009 1:35 PMAlso, a common problem seems to be prereq packages not installed, however, that is not the case here.
rpm -q binutils compat-db control-center gcc gcc-c++ glibc glibc-common \ gnome-libs libstdc++ libstdc++-devel make pdksh sysstat xscreensaver libaio op
enmotif21
binutils-2.17.50.0.6-9.el5
binutils-2.17.50.0.6-9.el5
compat-db-4.2.52-5.1
compat-db-4.2.52-5.1
control-center-2.16.0-16.el5
control-center-2.16.0-16.el5
gcc-4.1.2-44.el5
gcc-c++-4.1.2-44.el5
gcc-c++-4.1.2-44.el5
glibc-2.5-34
glibc-2.5-34
glibc-common-2.5-34
gnome-libs-1.4.2-0.ximian.0.8
libstdc++-4.1.2-44.el5
libstdc++-4.1.2-44.el5
libstdc++-devel-4.1.2-44.el5
libstdc++-devel-4.1.2-44.el5
make-3.81-3.el5
make-3.81-3.el5
pdksh-5.2.12-5
sysstat-7.0.2-3.el5
sysstat-7.0.2-3.el5
xscreensaver-3.14-1
libaio-0.3.106-3.2
libaio-0.3.106-3.2
openmotif21-2.1.30-9lba -
Error in invoking target 'install' after extproc32 in x86_64 installation
Hi
I am trying to install patch p4547809 (9.2.0.8) however when it gets to 99% of the installation I get this error:
Error in invoking target 'install' of makefile '/u01/oracle/9ir2db/rdbms/lib/ins_rdbms.mk'
According to the log file the error is as follows:
Linking external procedure agent (/u01/oracle/9ir2db/rdbms/lib/extproc32)
rm -f /u01/oracle/9ir2db/rdbms/lib/extproc32
gcc -m32 -o /u01/oracle/9ir2db/rdbms/lib/extproc32 -L/u01/oracle/9ir2db/rdbms/lib32/ -L/u01/oracle/9ir2db/lib32/ -L/u01/oracle/9ir2db/lib32/stubs/ /u01/oracle/9ir2db/rdbms/lib32/hormc.o /u01/oracle/9ir2db/rdbms/lib32/defopt.o /u01/oracle/9ir2db/rdbms/lib32/homts.o -lagtsh -lpls9 -lplp9 -lclntsh -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9 /u01/oracle/9ir2db/lib32/libgeneric9.a `cat /u01/oracle/9ir2db/lib32/sysliblist` -Wl,-rpath,/u01/oracle/9ir2db/lib:/lib:/usr/lib -lm `cat /u01/oracle/9ir2db/lib32/sysliblist` -ldl -lm -lvsn9
/usr/lib/gcc/x86_64-redhat-linux/3.4.6/libgcc_s_32.so: undefined reference to `dl_iterate_phdr@GLIBC_2.2.4'
collect2: ld returned 1 exit status
make[1]: *** [u01/oracle/9ir2db/rdbms/lib/extproc32] Error 1
make[1]: Leaving directory `/u01/oracle/9ir2db/rdbms/lib'
make: *** [extproc32] Error 2
End output from spawned process.
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'install' of makefile '/u01/oracle/9ir2db/rdbms/lib/ins_rdbms.mk'. See '/u01/oracle/oraInventory/logs/installActions2006-12-07_12-11-52PM.log' for details.
Exception Severity: 1
*** Cancel Dialog: ***
User Selected: Stop installation of all products.
Here are some additional details:
rpm -q binutils gcc gcc-c++ glibc gnome-libs libstdc++ libstdc++-devel make \ pdksh sysstat xscreensaver libaio binutils-2.15.92.0.2-21gcc-3.4.6-3
gcc-c++-3.4.6-3
glibc-2.3.4-2.25
gnome-libs-1.4.1.2.90-44.1
libstdc++-3.4.6-3
libstdc++-devel-3.4.6-3
make-3.80-6.EL4
sysstat-5.0.5-11.rhel4
xscreensaver-4.18-5.rhel4.11
libaio-0.3.105-2
>
I would appreciate any assistance on this. ThanksProblem is the compiler version. You need to use gcc 3.2 instead of 3.4.
-
Hello all,
I am attempting to install Oracle12c GI on two virtual nodes (in Fusion VMware) and am getting the following error message (Both nodes are configured exactly the same):
INFO: Start output from spawned process:
INFO: ----------------------------------
INFO:
INFO:
INFO: - Linking recovery manager (rman)
INFO: rm -f /opt/oragrid/rdbms/lib/rman
INFO: /opt/oragrid/bin/orald -o /opt/oragrid/rdbms/lib/rman -m64 -z noexecstack -Wl,--disable-new-dtags -L/opt/oragrid/rdbms/lib/ -L/opt/oragrid/lib/ -L/opt/oragrid/lib/stubs/ /opt/oragrid/lib/s0main.o /opt/oragrid/rdbms/lib/sskrmed.o /opt/oragrid/rdbms/lib/skrmpt.o -ldbtools12 -lclient12 -lsql12 -lpls12 -lrt -lplp12 -lsnls12 -lunls12 -lnls12 -lslax12 -lpls12 -lrt -lplp12 /opt/oragrid/lib/libplc12.a -lclntsh -lclntshcore `cat /opt/oragrid/lib/ldflags` -lncrypt12 -lnsgr12 -lnzjs12 -ln12 -lnl12 -lnro12 `cat
INFO: /opt/oragrid/lib/ldflags` -lncrypt12 -lnsgr12 -lnzjs12 -ln12 -lnl12 -lnnz12 -lzt12 -lztkg12 -lztkg12 -lclient12 -lnnetd12 -lvsn12 -lcommon12 -lgeneric12 -lmm -lsnls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lxml12 -lcore12 -lunls12 -lsnls12 -lnls12 -lcore12 -lnls12 `cat /opt/oragrid/lib/ldflags` -lncrypt12 -lnsgr12 -lnzjs12 -ln12 -lnl12 -lnro12 `cat /opt/oragrid/lib/ldflags` -lncrypt12 -lnsgr12 -lnzjs12 -ln12 -lnl12 -lclient12 -lnnetd12 -lvsn12 -lcommon12 -lgeneric12 -lsn
INFO: ls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lxml12 -lcore12 -lunls12 -lsnls12 -lnls12 -lcore12 -lnls12 -lclient12 -lnnetd12 -lvsn12 -lcommon12 -lgeneric12 -lsnls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lxml12 -lcore12 -lunls12 -lsnls12 -lnls12 -lcore12 -lnls12 `cat /opt/oragrid/lib/sysliblist` -Wl,-rpath,/opt/oragrid/lib -lm `cat /opt/oragrid/lib/sysliblist` -ldl -lm -L/opt/oragrid/lib
INFO: test ! -f /opt/oragrid/bin/rman ||\
mv -f /opt/oragrid/bin/rman /opt/oragrid/bin/rmanO
INFO: mv /opt/oragrid/rdbms/lib/rman /opt/oragrid/bin/rman
INFO: chmod 751 /opt/oragrid/bin/rman
INFO: chmod 755 /opt/oragrid/bin
INFO:
INFO: - Linking Oracle
INFO: rm -f /opt/oragrid/rdbms/lib/oracle
INFO: /opt/oragrid/bin/orald -o /opt/oragrid/rdbms/lib/oracle -m64 -z noexecstack -Wl,--disable-new-dtags -L/opt/oragrid/rdbms/lib/ -L/opt/oragrid/lib/ -L/opt/oragrid/lib/stubs/ -Wl,-E /opt/oragrid/rdbms/lib/opimai.o /opt/oragrid/rdbms/lib/ssoraed.o /opt/oragrid/rdbms/lib/ttcsoi.o -Wl,--whole-archive -lperfsrv12 -Wl,--no-whole-archive /opt/oragrid/lib/nautab.o /opt/oragrid/lib/naeet.o /opt/oragrid/lib/naect.o /opt/oragrid/lib/naedhs.o /opt/oragrid/rdbms/lib/config.o -lserver12 -lodm12 -lcell12 -lnnet12 -lskgx
INFO: p12 -lsnls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lxml12 -lcore12 -lunls12 -lsnls12 -lnls12 -lcore12 -lnls12 -lclient12 -lvsn12 -lcommon12 -lgeneric12 -lknlopt `if /usr/bin/ar tv /opt/oragrid/rdbms/lib/libknlopt.a | grep xsyeolap.o > /dev/null 2>&1 ; then echo "-loraolap12" ; fi` -lskjcx12 -lslax12 -lpls12 -lrt -lplp12 -lserver12 -lclient12 -lvsn12 -lcommon12 -lgeneric12 `if [ -f /opt/oragrid/lib/libavserver12.a ] ; then echo "-lavserver12" ; else echo "-lavstub12"; fi` `if [ -f
INFO: /opt/oragrid/lib/libavclient12.a ] ; then echo "-lavclient12" ; fi` -lknlopt -lslax12 -lpls12 -lrt -lplp12 -ljavavm12 -lserver12 -lwwg `cat /opt/oragrid/lib/ldflags` -lncrypt12 -lnsgr12 -lnzjs12 -ln12 -lnl12 -lnro12 `cat /opt/oragrid/lib/ldflags` -lncrypt12 -lnsgr12 -lnzjs12 -ln12 -lnl12 -lnnzst12 -lzt12 -lztkg12 -lmm -lsnls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lxml12 -lcore12 -lunls12 -lsnls12 -lnls12 -lcore12 -lnls12 -lztkg12 `cat /opt/oragrid/lib/ldflags` -lncrypt12
INFO: -lnsgr12 -lnzjs12 -ln12 -lnl12 -lnro12 `cat /opt/oragrid/lib/ldflags` -lncrypt12 -lnsgr12 -lnzjs12 -ln12 -lnl12 -lnnzst12 -lzt12 -lztkg12 -lsnls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lxml12 -lcore12 -lunls12 -lsnls12 -lnls12 -lcore12 -lnls12 `if /usr/bin/ar tv /opt/oragrid/rdbms/lib/libknlopt.a | grep "kxmnsd.o" > /dev/null 2>&1 ; then echo " " ; else echo "-lordsdo12"; fi` -L/opt/oragrid/ctx/lib/ -lctxc12 -lctx12 -lzx12 -lgx12 -lctx12 -lzx12 -lgx12 -lordimt12 -lclsra12 -ldbc
INFO: fg12 -lhasgen12 -lskgxn2 -lnnzst12 -lzt12 -lxml12 -locr12 -locrb12 -locrutl12 -lhasgen12 -lskgxn2 -lnnzst12 -lzt12 -lxml12 -lgeneric12 -loraz -llzopro -lorabz2 -lipp_z -lipp_bz2 -lippdcemerged -lippsemerged -lippdcmerged -lippsmerged -lippcore -lippcpemerged -lippcpmerged -lsnls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lxml12 -lcore12 -lunls12 -lsnls12 -lnls12 -lcore12 -lnls12 -lsnls12 -lunls12 -lsnls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lxml12 -lcore12
INFO: -lunls12 -lsnls12 -lnls12 -lcore12 -lnls12 -lasmclnt12 -lcommon12 -lcore12 -laio -lons `cat /opt/oragrid/lib/sysliblist` -Wl,-rpath,/opt/oragrid/lib -lm `cat /opt/oragrid/lib/sysliblist` -ldl -lm -L/opt/oragrid/lib
INFO: /
INFO: usr
INFO: /
INFO: bin
INFO: /
INFO: ld
INFO: :
INFO:
INFO: cannot
INFO:
INFO: find
INFO:
INFO: -
INFO: ljavavm12
INFO:
INFO: collect2:
INFO: ld returned 1 exit status
INFO:
INFO: make: *** [/opt/oragrid/rdbms/lib/oracle] Error 1
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'irman ioracle' of makefile '/opt/oragrid/rdbms/lib/ins_rdbms.mk'. See '/opt/oraInventory/logs/installActions2013-11-25_04-25-06PM.log' for details.
Exception Severity: 1
Below are my VM specs:
**************************************************************Installed RPM's*****************************************************************
cat /etc/redhat-release
Red Hat Enterprise Linux Server release 6.4 (Santiago)
rpm -qa gcc
gcc-4.4.7-3.el6.x86_64
rpm -qa make
make-3.81-20.el6.x86_64
rpm -qa|grep oracle
oracleasmlib-2.0.4-1.el6.x86_64
oracle-logos-60.0.14-1.0.1.el6.noarch
oracle-rdbms-server-12cR1-preinstall-1.0-8.el6.x86_64
kmod-oracleasm-2.0.6.rh1-2.el6.x86_64
oraclelinux-release-notes-6Server-9.x86_64
oraclelinux-release-6Server-4.0.4.x86_64
oracleasm-support-2.1.8-1.el6.x86_64
***************************************************************JAVA***************************************************************************
java version "1.7.0_45"
Java(TM) SE Runtime Environment (build 1.7.0_45-b18)
Java HotSpot(TM) 64-Bit Server VM (build 24.45-b08, mixed mode)
*************************************************************SYSCTL**************************************************************************
# Kernel sysctl configuration file for Red Hat Linux
# For binary values, 0 is disabled, 1 is enabled. See sysctl(8) and
# sysctl.conf(5) for more details.
# Controls IP packet forwarding
net.ipv4.ip_forward = 0
# Controls source route verification
net.ipv4.conf.default.rp_filter = 1
# Do not accept source routing
net.ipv4.conf.default.accept_source_route = 0
# Controls the System Request debugging functionality of the kernel
kernel.sysrq = 0
# Controls whether core dumps will append the PID to the core filename.
# Useful for debugging multi-threaded applications.
kernel.core_uses_pid = 1
kernel.core_pattern=/var/adm/crash/cores/%e.sig%s
# Controls the use of TCP syncookies
net.ipv4.tcp_syncookies = 1
# Disable netfilter on bridges.
net.bridge.bridge-nf-call-ip6tables = 0
net.bridge.bridge-nf-call-iptables = 0
net.bridge.bridge-nf-call-arptables = 0
# Controls the default maxmimum size of a mesage queue
kernel.msgmnb = 65536
# Controls the maximum size of a message, in bytes
kernel.msgmax = 65536
# Controls the maximum shared segment size, in bytes
# Controls the maximum number of shared memory segments, in pages
kernel.shmall = 4294967296
# oracle-rdbms-server-12cR1-preinstall setting for fs.file-max is 6815744
fs.file-max = 6815744
# oracle-rdbms-server-12cR1-preinstall setting for kernel.sem is '250 32000 100 128'
kernel.sem = 250 32000 100 128
# oracle-rdbms-server-12cR1-preinstall setting for kernel.shmmni is 4096
kernel.shmmni = 4096
# oracle-rdbms-server-12cR1-preinstall setting for kernel.shmall is 1073741824 on x86_64
# oracle-rdbms-server-12cR1-preinstall setting for kernel.shmmax is 4398046511104 on x86_64
kernel.shmmax = 4398046511104
# oracle-rdbms-server-12cR1-preinstall setting for net.core.rmem_default is 262144
net.core.rmem_default = 262144
# oracle-rdbms-server-12cR1-preinstall setting for net.core.rmem_max is 4194304
net.core.rmem_max = 4194304
# oracle-rdbms-server-12cR1-preinstall setting for net.core.wmem_default is 262144
net.core.wmem_default = 262144
# oracle-rdbms-server-12cR1-preinstall setting for net.core.wmem_max is 1048576
net.core.wmem_max = 1048576
# oracle-rdbms-server-12cR1-preinstall setting for fs.aio-max-nr is 1048576
fs.aio-max-nr = 1048576
# oracle-rdbms-server-12cR1-preinstall setting for net.ipv4.ip_local_port_range is 9000 65500
net.ipv4.ip_local_port_range = 9000 65500
# The below entries were added and deal with an r_filtering issue oracle wants private interconnects set loose
net.ipv4.conf.eth4.rp_filter = 2
net.ipv4.conf.eth6.rp_filter = 2
net.ipv4.conf.eth1.rp_filter = 1
*************************************************************Filesystem************************************************************************
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/vg_oracle12c-lv_root
8.9G 3.5G 5.0G 42% /
tmpfs 2.2G 0 2.2G 0% /dev/shm
/dev/sda1 485M 101M 359M 22% /boot
/dev/mapper/vg_oracle12c-lv_home
2.0G 70M 1.9G 4% /home
/dev/mapper/vg_oracle12c-lv_tmp
4.5G 541M 3.7G 13% /tmp
/dev/mapper/vg_oracle12c-lv_var
5.0G 956M 3.8G 20% /var
/dev/mapper/oracle_vg-oragrid
20G 5.0G 14G 27% /opt/oragrid
.host:/ 466G 137G 330G 30% /mnt/hgfs
*******************************************************************CPU INFO*******************************************************************************
cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 70
model name : Intel(R) Core(TM) i7-4850HQ CPU @ 2.30GHz
stepping : 1
cpu MHz : 2294.967
cache size : 6144 KB
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts mmx fxsr sse sse2 ss syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts nopl xtopology tsc_reliable nonstop_tsc aperfmperf pni pclmulqdq ssse3 fma cx16 sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand hypervisor lahf_lm ida arat epb xsaveopt pln pts dts fsgsbase smep
bogomips : 4589.93
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 70
model name : Intel(R) Core(TM) i7-4850HQ CPU @ 2.30GHz
stepping : 1
cpu MHz : 2294.967
cache size : 6144 KB
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts mmx fxsr sse sse2 ss syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts nopl xtopology tsc_reliable nonstop_tsc aperfmperf pni pclmulqdq ssse3 fma cx16 sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand hypervisor lahf_lm ida arat epb xsaveopt pln pts dts fsgsbase smep
bogomips : 4589.93
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management:
processor : 2
vendor_id : GenuineIntel
cpu family : 6
model : 70
model name : Intel(R) Core(TM) i7-4850HQ CPU @ 2.30GHz
stepping : 1
cpu MHz : 2294.967
cache size : 6144 KB
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts mmx fxsr sse sse2 ss syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts nopl xtopology tsc_reliable nonstop_tsc aperfmperf pni pclmulqdq ssse3 fma cx16 sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand hypervisor lahf_lm ida arat epb xsaveopt pln pts dts fsgsbase smep
bogomips : 4589.93
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management:
processor : 3
vendor_id : GenuineIntel
cpu family : 6
model : 70
model name : Intel(R) Core(TM) i7-4850HQ CPU @ 2.30GHz
stepping : 1
cpu MHz : 2294.967
cache size : 6144 KB
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts mmx fxsr sse sse2 ss syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts nopl xtopology tsc_reliable nonstop_tsc aperfmperf pni pclmulqdq ssse3 fma cx16 sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand hypervisor lahf_lm ida arat epb xsaveopt pln pts dts fsgsbase smep
bogomips : 4589.93
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management:
*******************************************************************************Memory************************************************************************
free -m
total used free shared buffers cached
Mem: 4331 3972 359 0 30 3412
-/+ buffers/cache: 530 3801
Swap: 14323 0 14323
****************************************************************************Network***************************************************************************
Note eth0 is NAT and used for internet connectivity, eth1 is the public network (static and accessible to the hypervising machine running fusion ), eth4 and and eth6 are private, and eth3 is connected to an openfiler storage appliance (This is also a VM serving out ISCSI targets).
eth0 Link encap:Ethernet HWaddr 00:50:56:22:C6:91
inet addr:192.168.90.140 Bcast:192.168.90.255 Mask:255.255.255.0
inet6 addr: fe80::250:56ff:fe22:c691/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:227 errors:0 dropped:0 overruns:0 frame:0
TX packets:225 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:24414 (23.8 KiB) TX bytes:18545 (18.1 KiB)
eth1 Link encap:Ethernet HWaddr 00:50:56:3A:AE:95
inet addr:192.168.3.2 Bcast:192.168.3.255 Mask:255.255.255.0
inet6 addr: fe80::250:56ff:fe3a:ae95/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:482561 errors:0 dropped:0 overruns:0 frame:0
TX packets:450616 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:483728272 (461.3 MiB) TX bytes:501489666 (478.2 MiB)
eth3 Link encap:Ethernet HWaddr 00:50:56:24:40:AB
inet addr:192.168.5.2 Bcast:192.168.5.255 Mask:255.255.255.0
inet6 addr: fe80::250:56ff:fe24:40ab/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4944 errors:0 dropped:0 overruns:0 frame:0
TX packets:3817 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:6186232 (5.8 MiB) TX bytes:346478 (338.3 KiB)
eth4 Link encap:Ethernet HWaddr 00:50:56:3F:77:AA
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::250:56ff:fe3f:77aa/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1222 errors:0 dropped:0 overruns:0 frame:0
TX packets:978 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:205198 (200.3 KiB) TX bytes:168464 (164.5 KiB)
eth6 Link encap:Ethernet HWaddr 00:50:56:22:72:E3
inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::250:56ff:fe22:72e3/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:354 errors:0 dropped:0 overruns:0 frame:0
TX packets:116 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:54390 (53.1 KiB) TX bytes:17992 (17.5 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:194338 errors:0 dropped:0 overruns:0 frame:0
TX packets:194338 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:920534042 (877.8 MiB) TX bytes:920534042 (877.8 MiB)
*****************************************************************************ORACLE ASM AND MULTIPATH INFO********************************************
/etc/init.d/oracleasm listdisks
VOTE1
VOTE2
VOTE3
vote3 (14f504e46494c45523434517a65422d4b6364682d57544f65) dm-8 OPNFILER,VIRTUAL-DISK
size=3.0G features='0' hwhandler='0' wp=rw
`-+- policy='round-robin 0' prio=1 status=active
`- 3:0:0:2 sdh 8:112 active ready running
vote2 (14f504e46494c45526e6c6a48324a2d6a4347462d7a465074) dm-6 OPNFILER,VIRTUAL-DISK
size=3.0G features='0' hwhandler='0' wp=rw
`-+- policy='round-robin 0' prio=1 status=active
`- 3:0:0:1 sdg 8:96 active ready running
vote1 (14f504e46494c45525763646753422d594262512d414a6275) dm-7 OPNFILER,VIRTUAL-DISK
size=3.0G features='0' hwhandler='0' wp=rw
`-+- policy='round-robin 0' prio=1 status=active
`- 3:0:0:0 sdf 8:80 active ready running
If any more information is necessary please request and I will provide, as you can see there is more than enough memory and disk space for the installation. The only exception being that I am using a different 'oraInventory', 'gridhome', and 'oraBase'. I have looked closely at the output and the problem seems to be a file called 'ljavavm12', I have highlighted the line in bold above in the log output. Any help with this would be greatly appreciated.
Regards,
AlexResolved my own issue,
for anyone else having the same problem, here is how it was resolved:
ljavavm12 is part of libjavavm12.a, for some reason this file was not copied into the $GRID_HOME, after doing so make went through fine.
'cp /opt/oragrid/javavm/jdk/jdk7/lib/libjavavm12.a /opt/oragrid/lib/'
Alex, -
Error in invoking target 'relink' of makefile precomp//lib/ins_precomp.mk
Hi Experts,
I am getting following error while installing oracle at the linking phase
ORACLE 10.2 /AIX 5.3
Error in invoking target 'relink' of makefile '/oracle/DNB/102_64/precomp/lib/ins_precomp.mk'.
See '/oracle/oraInventory/logs/installActions2007-05-15_03-35-04PM.log' for details.
And the make.log has following entry
SEVERE ERROR: Symbol table entry 18 in object /oracle/DNB/102_64/lib//libnnz10.a[truntim.o]:
Field n_offset contains 56885504. Valid values are between 4 and 915.
ld: 0711-251 SEVERE ERROR: Symbol table entry 18 in object /oracle/DNB/102_64/lib//libnnz10.a[truntim.o]:
Field n_offset contains 56885504. Valid values are between 4 and 915.
ld: 0711-866 INTERNAL ERROR: Output symbol table size miscalculated.
ld: 0711-759 INTERNAL ERROR: Source file xoutxx.c, line 470.
Depending on where this product was acquired, contact your service
representative or the approved supplier.
make: The error code from the last command is 16.
Regards
Arif AHmed
919820008732
make.log
ld: 0711-870 WARNING: Symbol table entry 17 in object /oracle/DNB/102_64/lib//libnnz10.a[pkcs11db.o]:
Unknown symbol type 0. The symbol is being copied to the output file.
ld: 0711-870 WARNING: Symbol table entry 18 in object /oracle/DNB/102_64/lib//libnnz10.a[pkcs11db.o]:
Unknown symbol type 18. The symbol is being copied to the output file.
ld: 0711-870 WARNING: Symbol table entry 115 in object /oracle/DNB/102_64/lib//libnnz10.a[pkcs11db.o]:
Unknown symbol type 0. The symbol is being copied to the output file.
ld: 0711-870 WARNING: Symbol table entry 251 in object /oracle/DNB/102_64/lib//libnnz10.a[pkcs11db.o]:
Unknown symbol type 0. The symbol is being copied to the output file.
ld: 0711-593 SEVERE ERROR: Symbol C_BSTAT (entry 252) in object /oracle/DNB/102_64/lib//libnnz10.a[pkcs11db.o]:
The symbol refers to a csect with symbol number 0, which was not
found. The new symbol cannot be associated with a csect and
is being ignored.
ld: 0711-870 WARNING: Symbol table entry 7 in object /oracle/DNB/102_64/lib//libnnz10.a[truntim.o]:
Unknown symbol type 1. The symbol is being copied to the output file.
ld: 0711-870 WARNING: Symbol table entry 8 in object /oracle/DNB/102_64/lib//libnnz10.a[truntim.o]:
Unknown symbol type 0. The symbol is being copied to the output file.
ld: 0711-870 WARNING: Symbol table entry 17 in object /oracle/DNB/102_64/lib//libnnz10.a[truntim.o]:
Unknown symbol type 0. The symbol is being copied to the output file.
ld: 0711-251 SEVERE ERROR: Symbol table entry 18 in object /oracle/DNB/102_64/lib//libnnz10.a[truntim.o]:
Field n_offset contains 56885504. Valid values are between 4 and 915.
ld: 0711-251 SEVERE ERROR: Symbol table entry 18 in object /oracle/DNB/102_64/lib//libnnz10.a[truntim.o]:
Field n_offset contains 56885504. Valid values are between 4 and 915.
ld: 0711-866 INTERNAL ERROR: Output symbol table size miscalculated.
ld: 0711-759 INTERNAL ERROR: Source file xoutxx.c, line 470.
Depending on where this product was acquired, contact your service
representative or the approved supplier.
make: The error code from the last command is 16.
Stop.
Install Action
ld: 0711-870 WARNING: Symbol table entry 7 in object /oracle/DNB/102_64/lib//libnnz10.a[pk
INFO: cs11db.o]:
Unknown symbol type 1. The symbol is being copied to the output file.
ld: 0711-870 WARNING: Symbol table entry 8 in object /oracle/DNB/102_64/lib//libnnz10.a[pkcs11db.o]:
Unknown symbol type 0. The symbol is being copied to the output file.
ld: 0711-870 WARNING: Symbol table entry 17 in object /oracle/DNB/102_64/lib//libnnz10.a[pkcs11db.o]:
Unknown symbol type 0. The symbol is being copied to the output file.
ld: 0711-870 WARNING: Symbol table entry 18 in object /oracle/DNB/102_64/lib//libnnz1
INFO: 0.a[pkcs11db.o]:
Unknown symbol type 18. The symbol is being copied to the output file.
ld: 0711-870 WARNING: Symbol table entry 115 in object /oracle/DNB/102_64/lib//libnnz10.a[pkcs11db.o]:
Unknown symbol type 0. The symbol is being copied to the output file.
ld: 0711-870 WARNING: Symbol table entry 251 in object /oracle/DNB/102_64/lib//libnnz10.a[pkcs11db.o]:
Unknown symbol type 0. The symbol is being copied to the output file.
ld: 0711-593 SEVERE ERROR: Symbol C_BSTAT (entry 252) in object /oracle/DNB
INFO: /102_64/lib//libnnz10.a[pkcs11db.o]:
The symbol refers to a csect with symbol number 0, which was not
found. The new symbol cannot be associated with a csect and
is being ignored.
ld: 0711-870 WARNING: Symbol table entry 7 in object /oracle/DNB/102_64/lib//libnnz10.a[truntim.o]:
Unknown symbol type 1. The symbol is being copied to the output file.
ld: 0711-870 WARNING: Symbol table entry 8 in object /oracle/DNB/102_64/lib//libnnz10.a[truntim.o]:
Unknown symbol type 0. The symbol is being copied to the
INFO: output file.
ld: 0711-870 WARNING: Symbol table entry 17 in object /oracle/DNB/102_64/lib//libnnz10.a[truntim.o]:
Unknown symbol type 0. The symbol is being copied to the output file.
ld: 0711-251 SEVERE ERROR: Symbol table entry 18 in object /oracle/DNB/102_64/lib//libnnz10.a[truntim.o]:
Field n_offset contains 56885504. Valid values are between 4 and 915.
ld: 0711-251 SEVERE ERROR: Symbol table entry 18 in object /oracle/DNB/102_64/lib//libnnz10.a[truntim.o]:
Field n_offset contains 56885504. Valid val
INFO: ues are between 4 and 915.
ld: 0711-866 INTERNAL ERROR: Output symbol table size miscalculated.
INFO: ld: 0711-759 INTERNAL ERROR: Source file xoutxx.c, line 470.
Depending on where this product was acquired, contact your service
representative or the approved supplier.
INFO: make: The error code from the last command is 16.
Stop.
INFO: End output from spawned process.
INFO: -
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'relink' of makefile '/oracle/DNB/102_64/precomp/lib/ins_precomp.mk'. See '/oracle/oraInventory/logs/installActions2007-05-17_11-25-50AM.log' for details.
Exception Severity: 1
INFO: Exception handling set to prompt user with options to Retry Ignore
User Choice: Retry
INFO: The output of this make operation is also available at: '/oracle/DNB/102_64/install/make.log'
INFO:
INFO: Start output from spawned process:
INFO: -
INFO:
INFO: Linking /oracle/DNB/102_64/precomp/lib/proc
System Information
<Host>:/oracle/DNB/install/ORA>lsps -a
Page Space Physical Volume Volume Group Size %Used Active Auto Type
paging01 hdiskpower4 swapvg 10240MB 1 yes yes lv
paging00 hdiskpower4 swapvg 10240MB 1 yes yes lv
hd6 hdisk0 rootvg 2048MB 1 yes yes lv
<Host>:/oracle/DNB/install/ORA>lsattr -El sys0 -a realmem
realmem 4194304 Amount of usable physical memory in Kbytes False
<Host>:/oracle/DNB/install/ORA>lsdev | grep aio
aio0 Available Asynchronous I/O (Legacy)
posix_aio0 Available Posix Asynchronous I/O
<Host>:/oracle/DNB/install/ORA>lsattr -EHl sys0 | grep maxuproc
maxuproc 2048 Maximum number of PROCESSES allowed per user True
<Host>:/oracle/DNB/install/ORA>oslevel -s
5300-05-03
<Host>:/oracle/DNB/install/ORA>lsuser oradnb
oradnb id=3861 pgrp=dba groups=dba,oper,sapinst home=/oracle/DNB shell=/bin/csh gecos=SAP Database Administrator login=true su=true rlogin=true daemon=true admin=false sugroups=ALL admgroups= tpath=nosak ttys=ALL expires=0 auth1=SYSTEM auth2=NONE umask=22 registry=files SYSTEM=compat or LDAP logintimes= loginretries=0 pwdwarntime=0 account_locked=false minage=0 maxage=0 maxexpired=-1 minalpha=0 minother=0 mindiff=0 maxrepeats=8 minlen=0 histexpire=0 histsize=0 pwdchecks= dictionlist= fsize=-1 cpu=-1 data=-1 stack=-1 core=8388604 rss=65536 nofiles=2000 fsize_hard=-1 cpu_hard=-1 data_hard=-1 stack_hard=-1 core_hard=8388604 roles=
<Host>:/oracle/DNB/install/ORA>java -fullversion
java full version "J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM) build caix64142-20061124 (SR7)"
Checking the Software Requirements on AIX
http://download-east.oracle.com/docs/html/B10811_05/ch2.htm#i1009960
<Host>:/oracle/<SID>/install/ORA>oslevel -r
5300-05
<Host>:/oracle/<SID>/install/ORA>lslpp -l bos.adt.base bos.adt.lib bos.adt.libm bos.perf.perfstat \
> bos.perf.libperfstat bos.perf.proctools
Fileset Level State Description
Path: /usr/lib/objrepos
bos.adt.base 5.3.0.51 COMMITTED Base Application Development
Toolkit
bos.adt.lib 5.3.0.50 COMMITTED Base Application Development
Libraries
bos.adt.libm 5.3.0.40 COMMITTED Base Application Development
Math Library
bos.perf.libperfstat 5.3.0.50 COMMITTED Performance Statistics Library
Interface
bos.perf.perfstat 5.3.0.50 COMMITTED Performance Statistics
Interface
bos.perf.proctools 5.3.0.50 COMMITTED Proc Filesystem Tools
Path: /etc/objrepos
bos.perf.libperfstat 5.3.0.0 COMMITTED Performance Statistics Library
Interface
bos.perf.perfstat 5.3.0.50 COMMITTED Performance Statistics
Interface
<Host>:/oracle/<SID>/install/ORA>/usr/sbin/instfix -i -k "IY43980 IY44810 IY45462 IY45707 IY46214 IY46605 \
> IY48525 IY51801 IY56024"
There was no data for IY43980 in the fix database.
There was no data for IY44810 in the fix database.
There was no data for IY45462 in the fix database.
There was no data for IY45707 in the fix database.
There was no data for IY46214 in the fix database.
There was no data for IY46605 in the fix database.
All filesets for IY48525 were found.
There was no data for 5 in the fix database.
There was no data for IY51801 in the fix database.
There was no data for IY56024 in the fix database.
<Host>:/oracle/<SID>/install/ORA>lslpp -l X11.motif.lib mqm.Client.Bnd mqm.Server.Bnd
Fileset Level State Description
Path: /usr/lib/objrepos
X11.motif.lib 5.3.0.50 COMMITTED AIXwindows Motif Libraries
lslpp: 0504-132 Fileset mqm.Client.Bnd not installed.
lslpp: 0504-132 Fileset mqm.Server.Bnd not installed.
<Host>:/oracle/<SID>/install/ORA>lslpp -l bos.rte.aio
Fileset Level State Description
Path: /usr/lib/objrepos
bos.rte.aio 5.3.0.51 COMMITTED Asynchronous I/O Extension
Path: /etc/objrepos
bos.rte.aio 5.3.0.0 COMMITTED Asynchronous I/O Extension
<Host>:/oracle/<SID>/install/ORA>/usr/sbin/instfix -i -k "IY48526 IY47055 IY40034"
There was no data for IY48526 in the fix database.
There was no data for IY47055 in the fix database.
There was no data for IY40034 in the fix database.Dear @Prince Jose
how to enamble CIO?
maybe your can give a step by step..
regards,
RhA -
ERROR IN INVOKING TARGET 'RELINK' OF MAKEFILE '/INS_PRECOMP.mk' in 11g Form
Hi,
I am installing 11g Forms & Report [11.1.2]s on AIX 6.1, all other JDK and Weblogic Server installed Successfully without any error.
When i installed 11g Forms & Reports i am getting this below error on 92% of completion.
ERROR IN INVOKING TARGET 'RELINK' OF MAKEFILE '///INS_PRECOMP.mk'
What is this error. Oracle Support says its a well known error to be solve by create a symlink as root user.
They advised us to do this following
Yes, there is a known issue with AIX OS.
Before starting the Oracle Fusion Middleware 11g Classic installation on IBM AIX, check for "xlc" availability on the system. It should be present either under /usr/bin/ or under >/usr/vac/bin directory.
If /usr/vac/bin/xlc is present, create the following symlink as root user:
# ln -s /usr/vac/bin/xlc /usr/local/bin/xlc
If /usr/bin/xlc is present, create the following symlink as root user:
# ln -s /usr/bin/xlc /usr/local/bin/xlc
Please clean up the failed install and start new install once you follow the above steps and let me know the results.The above steps are given by metalink support.
But we do not have the XLC folder in our OS.
Will you kindly advice me, why is that XLC folder Required ?
If it is a Compilers folder why we need that in Production Server Installation. ?
Kindly Advice me, we are hanged in this step for a more than 3 Days..
Regards
PajaXLC is a compiler for AIX. If you don't have it, and someone believes you do then you will need to install it. Because you did not mention what MOS note you were reading it is hard to say if this is a good plan or not. Take a look here:
http://www.google.com/search?q=aix+xlc
Also, if you haven't already done so, this note may offer some guidance:
<blockquote>Installing Oracle On Aix:'Error In Invoking Target 'Relink' Of Makefile ...' ld: 0706-006 Cannot find or open library file: -l m (Doc ID 309668.1)</blockquote>
And this patch is worth installing once you correct the current problem as you will need it for future patch installations: Patch ID: 13990099 -
Error in invoking target 'ntcontab.o' of make file. 11g x32 on x64 machine.
Hello all,
We have Red Hat 5.8 x86_64 and we have requirement to install WebTier x32 on our system. As per Oracle documentation it is possible if we apply linux32 bash before installation and do step 2.1.1.2 described in this document -> http://docs.oracle.com/cd/E14571_01/doc.1111/e14260/install.htm
During installation of FMW 11g x32 11.1.1.6.0 we have error on 92% (see attachement).
All installation prerequirements are sucsessfull.
We are applying only HTTP server for Siebel.
######ERROR we are reciewing during installation:
Error in invoking target 'ntcontab.o' of makefile '/app/middleware4/ohs/network/lib/ins_net_client.mk'. See '/app/ora11/oraInventory/logs/install2012-06-28_01-19-16PM.log' for details.
######And this is output from make.log:
/usr/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/app/middleware2/ohs2/rm -f ntcontab.*
(if [ "compile" = "compile" ] ; then \
/app/middleware2/ohs2/bin/gennttab > ntcontab.c ;\
/usr/bin/gcc -c ntcontab.c ;\
rm -f /app/middleware2/ohs2/lib/ntcontab.o ;\
mv ntcontab.o /app/middleware2/ohs2/lib/ ;\
/usr/bin/ar rv /app/middleware2/ohs2/lib/libn11.a /app/middleware2/ohs2/lib/ntcontab.o ; fi)
gcc.orig: no input files
mv: cannot stat `ntcontab.o': No such file or directory
/usr/bin/ar: /app/middleware2/ohs2/lib/ntcontab.o: No such file or directory
make: *** [ntcontab.o] Error 1
######These are packages we got on our system:
automake14-1.4p6-13.el5.1.noarch
automake15-1.5-16.el5.2.noarch
automake16-1.6.3-8.el5.1.noarch
automake17-1.7.9-7.el5.2.noarch
automake-1.9.6-2.3.el5.noarch
binutils-2.17.50.0.6-20.el5.x86_64
compat-db-4.2.52-5.1.x86_64
compat-gcc-34-3.4.6-4.1.x86_64
compat-gcc-34-c++-3.4.6-4.1.x86_64
compat-gcc-34-g77-3.4.6-4.1.x86_64
compat-glibc-2.3.4-2.26.i386
compat-glibc-2.3.4-2.26.x86_64
compat-glibc-headers-2.3.4-2.26.x86_64
compat-libcom_err-1.0-7.i386
compat-libcom_err-1.0-7.x86_64
compat-libf2c-34-3.4.6-4.1.x86_64
compat-libgcc-296-2.96-138.i386
compat-libstdc++-296-2.96-138.i386
compat-libstdc++-33-3.2.3-61.i386
compat-libstdc++-33-3.2.3-61.x86_64
cpp-4.1.2-52.el5.x86_64
elfutils-libelf-0.137-3.el5.i386
elfutils-libelf-0.137-3.el5.x86_64
elfutils-libelf-devel-0.137-3.el5.x86_64
elfutils-libelf-devel-static-0.137-3.el5.x86_64
gcc-4.1.2-52.el5.x86_64
gcc-c++-4.1.2-52.el5.x86_64
gcc-gfortran-4.1.2-52.el5.x86_64
glibc-2.5-81.el5_8.2.i686
glibc-2.5-81.el5_8.2.x86_64
glibc-common-2.5-81.el5_8.2.x86_64
glibc-devel-2.5-81.el5_8.2.i386
glibc-devel-2.5-81.el5_8.2.x86_64
glibc-headers-2.5-81.el5_8.2.x86_64
imake-1.0.2-3.x86_64
java-1.4.2-gcj-compat-1.4.2.0-40jpp.115.x86_64
ksh-20100621-5.el5_8.1.x86_64
libaio-0.3.106-5.i386
libaio-0.3.106-5.x86_64
libaio-devel-0.3.106-5.x86_64
libgcc-4.1.2-52.el5.i386
libgcc-4.1.2-52.el5.x86_64
libstdc++-4.1.2-52.el5.i386
libstdc++-4.1.2-52.el5.x86_64
libstdc++-devel-4.1.2-52.el5.i386
libstdc++-devel-4.1.2-52.el5.x86_64
make-3.81-3.el5.x86_64
openmotif-2.3.1-6.1.el5_8.i386
openmotif-2.3.1-6.1.el5_8.x86_64
sysstat-7.0.2-11.el5.x86_64
Please help with some ideas.
Thank You,
aspxSolved.
heh...2.1.1.2 must be in one line...
aspx -
Error in invoking target 'install' of makefile - Oracle Database 11g Releas
Error in invoking target 'install' of makefile '/home/oracle/B/product/11g/ctx/lib/ins_ctx.mk'. See '/home/oracle/app/oraInventory/logs/installActions2012-03-19_03-17-52PM.log' for details.
OS : Oracle Linux - Red Hat Enterprise Linux Server release 6.2
Oracle : 11g Release 2
Edited by: user13426437 on Mar 20, 2012 10:04 AMHere is the error message
INFO: gcc -o ctxhx -m64 -L/home/oracle/B/product/11g/ctx/lib/ -L/home/oracle/B/product/11g/lib/ -L/home/oracle/B/product/11g/lib/stubs/ /home/oracle/B/product/11g/ctx/lib/
ctxhx.o -L/home/oracle/B/product/11g/ctx/lib/ -lm -lsc_fa -lsc_ex -lsc_da -lsc_ca -lz -lctxhx -Wl,-rpath,/home/oracle/B/product/11g/ctx/lib -lsnls11 -lnls11 -lcore11 -lsn
ls11 -lnls11 -lcore11 -lsnls11 -lnls11 -lxml11 -lcore11 -lunls11 -lsnls11 -lnls11 -lcore11 -lnls11 `cat /home/oracle/B/product/11g/lib/sysliblist`
INFO: /usr/bin/ld: warning: libstdc++.so.5, needed by /home/oracle/B/product/11g/ctx/lib//libsc_fa.so, not found (try using -rpath or -rpath-link)
/home/oracle/B/product/11g/ctx/lib/libwv_core.so: undefined reference to `__cxa_pure_virtual@CXXABI_1.2'
/home/oracle/B/product/11g/ctx/lib//libsc_fa.so: undefined reference to `__gxx_personality_v0@CXXABI_1.2'
/home/oracle/B/product/11g/ctx/lib/libwv_core.so: undefined reference to `
INFO: vtable for __cxxabiv1::__class_type_info@GLIBCPP_3.2'
/home/oracle/B/product/11g/ctx/lib/libsc_ch.so: undefined reference to `__gxx_personality_v0'
/home/oracle/B/product/11g/ctx/lib/libwv_core.so: undefined reference to `vtable for __cxxabiv1::__si_class_type_info@GLIBCPP_3.2'
/home/oracle/B/product/11g/ctx/lib/libwv_core.so: undefined reference to `std::ios_base::Init::Init()@GLIBCPP_3.2'
/home/oracle/B/product/11g/ctx/lib/libwv_core.so: undefined reference to `std::ios_base::Init::~Init()@GLIBCPP_3.2'
/h
INFO: ome/oracle/B/product/11g/ctx/lib/libwv_core.so: undefined reference to `operator delete(void*)@GLIBCPP_3.2'
collect2: ld returned 1 exit status
INFO: make: *** [ctxhx] Error 1
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'install' of makefile '/home/oracle/B/product/11g/ctx/lib/ins_ctx.mk'. See '/home/oracle/app/oraInventory/logs/installActions2012-03-19_03-17-52PM.log' for details.
Exception Severity: 1
INFO: Linking Text executables
INFO: Linking Text executables
INFO: The output of this make operation is also available at: '/home/oracle/B/product/11g/install/make.log'
INFO:
Maybe you are looking for
-
ALSA plays only one source at a time
OK. I give up ... I'm posting. I've spent about 6 hours going back and forth and I'm about the same as I started. Long story short... This is a fresh install. Audio worked "out of the box" but I soon realized that if I'm playing music I cannot play a
-
I still having problems w IPHOTO
Process: iPhoto [400] Path: /Applications/iPhoto.app/Contents/MacOS/iPhoto Identifier: com.apple.iPhoto Version: 8.1 (8.1) Build Info: iPhotoProject-4150000~4 Code Type: X86 (Native) Parent Process: launchd
-
Hello experts, This is the problem: I have this program which generates records using bdc procedures... the program runs perfectly in the list so 1 record shows correctly. However, when I looked in the background, I'm getting duplicate records (if we
-
Error starting J2EE after EP installation
Hi, I'm trying to install EP 6.0 SP9 in WAS 6.40 SP9 on Linux PowerPC. WAS is an standalone instance (only JAVA part). The installation is aborted in the J2EE Start step (the step before the latest step). After that I cannot start J2EE Engine anymore
-
I updated Firefox from 11 to 12 today. When I reload a page with changed content the scrollbar is down and I have to scroll up to see the new content. Is the a bug that was introduced with Firefox 12?