Error in invoking target ntcontab.o of makefile ../../../ins_net_client.mk
Hi,
please help me on this installation problem as i facing an error. I suppose my make.log file is the same as written on Note:234898.1. The next solution i suppose is fix and install a C++ compiler. Please help/advice/suggest me on C++ compiler. My package gcc installed are (gcc-3.3.4-11 and gcc-c++3.3.4-11).
Thanks and appreciate
feizz,
Ok, on certification matrix, we can read any info :
Documentation Updates :
* Please refer to Oracle9i Release Notes Release 2 (9.2.0.5.0) for information on SLES9 :
* Part number B13670-03 http://www.oracle.com/technology/documentation/oracle9i.html
* Please, also, refer toOracle9i Database Server Patch Set Notes Release 2 (9.2.0.5) Patch Set 4 for Linux x86
To install 9205:
* install 9204 and then the 9205 PatchSet.
* patchset 9.2.0.5 on SLES9 please refer to bug 3809563
Additional steps to be followed prior to Installation for 9204:
* If using Bourne, Bash, or Korn shell: ( /usr/lib/libInternalSymbols.so can be obtained from the orarun package )
o ORACLE_BASE= ; export ORACLE_BASE
o LD_ASSUME_KERNEL=2.4.21; export LD_ASSUME_KERNEL
o LD_PRELOAD=/usr/lib/libInternalSymbols.so ; export LD_PRELOAD
Please, check this patch to see if you are in this situation.
More than, I strongly advise to read note 169706.1 Oracle RDBMS on AIX,HP-UX,Solaris,Tru64,Linux,MacOSX: Versions, Sizes, Requirements Quick Reference
Good luck, and tell us if patch help you.
Nicolas.
Similar Messages
-
Error in invoking target "ntcontab.o"of makefile
hi guys,
i am installing Oracle 10.2.0 s/w on SuSe Linux Ent 10 SP2. at the time of Database installation the following error is displayed.
"Error in invoking target "ntcontab.o"of makefile /oracle/PTS/102_64/network/lib/ins_net_client.mk see /oracle/orainventory/logs/InstallActions-02-02-2009.log "
NFO: Start output from spawned process:
INFO: -
INFO:
INFO: rm -f ntcontab.*
INFO: (if [ "compile" = "compile" ] ; then \
/oracle/PTS/102_64/bin/gennttab > ntcontab.c
gcc -c ntcontab.c
rm -f /oracle/PTS/102_64/lib/ntcontab.o
mv ntcontab.o /oracle/PTS/102_64/lib/
INFO: /usr/bin/ar rv /oracle/PTS/102_64/lib/libn10.a /oracle/PTS/102_64/lib/ntcontab.o ; fi)
INFO: /bin/sh: gcc: command not found
INFO: mv: cannot stat `ntcontab.o': No such file or directory
INFO: /usr/bin/ar: /oracle/PTS/102_64/lib/ntcontab.o: No such file or directory
INFO: make: *** [ntcontab.o] Error 1
INFO: End output from spawned process.
INFO: -
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'ntcontab.o' of makefile '/oracle/PTS/102_64/network/lib/ins_net_client.mk'. See '/oracle/oraInventory/logs/installActions2009-02-26_12-15-10PM.log' for details.
Exception Severity: 1
INFO: Exception handling set to prompt user with options to Retry Ignore
User Choice: Retry
INFO: The output of this make operation is also available at: '/oracle/PTS/102_64/install/make.log'
INFO:
INFO: Start output from spawned process:
INFO: -
INFO:
INFO: rm -f ntcontab.*
INFO: (if [ "compile" = "compile" ] ; then \
/oracle/PTS/102_64/bin/gennttab > ntcontab.c
gcc -c ntcontab.c
rm -f /oracle/PTS/102_64/lib/ntcontab.o
mv ntcontab.o /oracle/PTS/102_64/lib/
INFO: /usr/bin/ar rv /oracle/PTS/102_64/lib/libn10.a /oracle/PTS/102_64/lib/ntcontab.o ; fi)
INFO: /bin/sh: gcc: command not found
INFO: mv: cannot stat `ntcontab.o': No such file or directory
INFO: /usr/bin/ar: /oracle/PTS/102_64/lib/ntcontab.o: No such file or directory
INFO: make: *** [ntcontab.o] Error 1
INFO: End output from spawned process.
INFO: -
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'ntcontab.o' of makefile '/oracle/PTS/102_64/network/lib/ins_net_client.mk'. See '/oracle/oraInventory/logs/installActions2009-02-26_12-15-10PM.log' for details.
Exception Severity: 1
INFO: Exception handling set to prompt user with options to Retry Ignore
User Choice: Retry
INFO: The output of this make operation is also available at: '/oracle/PTS/102_64/install/make.log'
INFO:
INFO: Start output from spawned process:
INFO: -
INFO:
INFO: rm -f ntcontab.*
INFO: (if [ "compile" = "compile" ] ; then \
/oracle/PTS/102_64/bin/gennttab > ntcontab.c
gcc -c ntcontab.c
rm -f /oracle/PTS/102_64/lib/ntcontab.o
mv ntcontab.o /oracle/PTS/102_64/lib/
INFO: /usr/bin/ar rv /oracle/PTS/102_64/lib/libn10.a /oracle/PTS/102_64/lib/ntcontab.o ; fi)
INFO: /bin/sh: gcc: command not found
INFO: mv: cannot stat `ntcontab.o': No such file or directory
INFO: /usr/bin/ar: /oracle/PTS/102_64/lib/ntcontab.o: No such file or directory
INFO: make: *** [ntcontab.o] Error 1
INFO: End output from spawned process.
INFO: -
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'ntcontab.o' of makefile '/oracle/PTS/102_64/network/lib/ins_net_client.mk'. See '/oracle/oraInventory/logs/installActions2009-02-26_12-15-10PM.log' for details.
Exception Severity: 1
INFO: Exception handling set to prompt user with options to Retry Ignore
User Choice: Retry
INFO: The output of this make operation is also available at: '/oracle/PTS/102_64/install/make.log'
INFO:
INFO: Start output from spawned process:
INFO: -
INFO:
INFO: rm -f ntcontab.*
INFO: (if [ "compile" = "compile" ] ; then \
/oracle/PTS/102_64/bin/gennttab > ntcontab.c
gcc -c ntcontab.c
rm -f /oracle/PTS/102_64/lib/ntcontab.o
mv ntcontab.o /oracle/PTS/102_64/lib/
INFO: /usr/bin/ar rv /oracle/PTS/102_64/lib/libn10.a /oracle/PTS/102_64/lib/ntcontab.o ; fi)
INFO: /bin/sh: gcc: command not found
INFO: mv: cannot stat `ntcontab.o': No such file or directory
INFO: /usr/bin/ar: /oracle/PTS/102_64/lib/ntcontab.o: No such file or directory
INFO: make: *** [ntcontab.o] Error 1
INFO: End output from spawned process.
INFO: -
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'ntcontab.o' of makefile '/oracle/PTS/102_64/network/lib/ins_net_client.mk'. See '/oracle/oraInventory/logs/installActions2009-02-26_12-15-10PM.log' for details.
Exception Severity: 1
INFO: Exception handling set to prompt user with options to Retry Ignore
User Choice: Retry
INFO: The output of this make operation is also available at: '/oracle/PTS/102_64/install/make.log'
INFO:
INFO: Start output from spawned process:
INFO: -
INFO:
INFO: rm -f ntcontab.*
INFO: (if [ "compile" = "compile" ] ; then \
/oracle/PTS/102_64/bin/gennttab > ntcontab.c
gcc -c ntcontab.c
rm -f /oracle/PTS/102_64/lib/ntcontab.o
mv ntcontab.o /oracle/PTS/102_64/lib/
INFO: /usr/bin/ar rv /oracle/PTS/102_64/lib/libn10.a /oracle/PTS/102_64/lib/ntcontab.o ; fi)
INFO: /bin/sh: gcc: command not found
mv: cannot stat `ntcontab.o': No such file or directory
INFO: /usr/bin/ar: /oracle/PTS/102_64/lib/ntcontab.o: No such file or directory
INFO: make: *** [ntcontab.o] Error 1
INFO: End output from spawned process.
INFO: -
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'ntcontab.o' of makefile '/oracle/PTS/102_64/network/lib/ins_net_client.mk'. See '/oracle/oraInventory/logs/installActions2009-02-26_12-15-10PM.log' for details.
Exception Severity: 1
please help me on this issue
Regards
RameshHello Ramesh,
have you installed all the software components of SLES 10 like described in sapnote #958253?
It seems like you don't have installed the gcc compiler.
Regards
Stefan -
Oracle 9i Error in invoking target ntcontab.o of makefile
Does anybody know what this means / how to get the install to continue (I am using Mandrake 8.1) I am new both to Oracle and Linux, help to finally get this installed would be much appreciated.
user2040322 wrote:
n/sh: /usr/bin/gcc: No such file or directory
mv: cannot stat `ntcontab.o': No such file or directoryWhat is OS and do You installed all needed packages?
For example from this error we can see that gcc probably is missing.
Check install guide and install required packages. -
Error in invoking target 'ntcontab.o' of make file. 11g x32 on x64 machine.
Hello all,
We have Red Hat 5.8 x86_64 and we have requirement to install WebTier x32 on our system. As per Oracle documentation it is possible if we apply linux32 bash before installation and do step 2.1.1.2 described in this document -> http://docs.oracle.com/cd/E14571_01/doc.1111/e14260/install.htm
During installation of FMW 11g x32 11.1.1.6.0 we have error on 92% (see attachement).
All installation prerequirements are sucsessfull.
We are applying only HTTP server for Siebel.
######ERROR we are reciewing during installation:
Error in invoking target 'ntcontab.o' of makefile '/app/middleware4/ohs/network/lib/ins_net_client.mk'. See '/app/ora11/oraInventory/logs/install2012-06-28_01-19-16PM.log' for details.
######And this is output from make.log:
/usr/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/app/middleware2/ohs2/rm -f ntcontab.*
(if [ "compile" = "compile" ] ; then \
/app/middleware2/ohs2/bin/gennttab > ntcontab.c ;\
/usr/bin/gcc -c ntcontab.c ;\
rm -f /app/middleware2/ohs2/lib/ntcontab.o ;\
mv ntcontab.o /app/middleware2/ohs2/lib/ ;\
/usr/bin/ar rv /app/middleware2/ohs2/lib/libn11.a /app/middleware2/ohs2/lib/ntcontab.o ; fi)
gcc.orig: no input files
mv: cannot stat `ntcontab.o': No such file or directory
/usr/bin/ar: /app/middleware2/ohs2/lib/ntcontab.o: No such file or directory
make: *** [ntcontab.o] Error 1
######These are packages we got on our system:
automake14-1.4p6-13.el5.1.noarch
automake15-1.5-16.el5.2.noarch
automake16-1.6.3-8.el5.1.noarch
automake17-1.7.9-7.el5.2.noarch
automake-1.9.6-2.3.el5.noarch
binutils-2.17.50.0.6-20.el5.x86_64
compat-db-4.2.52-5.1.x86_64
compat-gcc-34-3.4.6-4.1.x86_64
compat-gcc-34-c++-3.4.6-4.1.x86_64
compat-gcc-34-g77-3.4.6-4.1.x86_64
compat-glibc-2.3.4-2.26.i386
compat-glibc-2.3.4-2.26.x86_64
compat-glibc-headers-2.3.4-2.26.x86_64
compat-libcom_err-1.0-7.i386
compat-libcom_err-1.0-7.x86_64
compat-libf2c-34-3.4.6-4.1.x86_64
compat-libgcc-296-2.96-138.i386
compat-libstdc++-296-2.96-138.i386
compat-libstdc++-33-3.2.3-61.i386
compat-libstdc++-33-3.2.3-61.x86_64
cpp-4.1.2-52.el5.x86_64
elfutils-libelf-0.137-3.el5.i386
elfutils-libelf-0.137-3.el5.x86_64
elfutils-libelf-devel-0.137-3.el5.x86_64
elfutils-libelf-devel-static-0.137-3.el5.x86_64
gcc-4.1.2-52.el5.x86_64
gcc-c++-4.1.2-52.el5.x86_64
gcc-gfortran-4.1.2-52.el5.x86_64
glibc-2.5-81.el5_8.2.i686
glibc-2.5-81.el5_8.2.x86_64
glibc-common-2.5-81.el5_8.2.x86_64
glibc-devel-2.5-81.el5_8.2.i386
glibc-devel-2.5-81.el5_8.2.x86_64
glibc-headers-2.5-81.el5_8.2.x86_64
imake-1.0.2-3.x86_64
java-1.4.2-gcj-compat-1.4.2.0-40jpp.115.x86_64
ksh-20100621-5.el5_8.1.x86_64
libaio-0.3.106-5.i386
libaio-0.3.106-5.x86_64
libaio-devel-0.3.106-5.x86_64
libgcc-4.1.2-52.el5.i386
libgcc-4.1.2-52.el5.x86_64
libstdc++-4.1.2-52.el5.i386
libstdc++-4.1.2-52.el5.x86_64
libstdc++-devel-4.1.2-52.el5.i386
libstdc++-devel-4.1.2-52.el5.x86_64
make-3.81-3.el5.x86_64
openmotif-2.3.1-6.1.el5_8.i386
openmotif-2.3.1-6.1.el5_8.x86_64
sysstat-7.0.2-11.el5.x86_64
Please help with some ideas.
Thank You,
aspxSolved.
heh...2.1.1.2 must be in one line...
aspx -
Hello,
i try to Upgrade from oracle 9.2.0.7 to Oracle 10.2.0.1.
But the Linking to not work.
The Paket: bos-adm-libm is installt.
The Oracle Installer say - all OK, no errors.
The Script: rootpre.sh i run as user: root, befor i strart runInstaller
Here is a part of the file: /oracle/SAP1/oraInventory/logs/installActions2008-05-16_03-23-23PM.log
INFO: Start output from spawned process:
INFO: ----------------------------------
INFO:
INFO: rm -f ntcontab.*
INFO: (if [ "assemble" = "compile" ] ; then /oracle/SAP1/1020_64/bin/gennttab > ntcontab.c ; /oracle/SAP1/1020_64/bin/oraxlc -c ntcontab.c ; rm -f /oracle/SAP1/1020_64/lib/ntcontab.o ; mv ntcontab.o /oracle/SAP1/1020_64/lib/ ; /bin/ar -
X64 rv /oracle/SAP1/1020_64/lib/libn10.a /oracle/SAP1/1020_64/lib/ntcontab.o ; fi)
INFO: (if [ "assemble" = "assemble" ] ; then /oracle/SAP1/1020_64/bin/gennttab > ntcontab.s ; /bin/as -a64 -o ntcontab.o ntcontab.s ; rm -f /oracle/SAP1/1020_64/lib/ntcontab.o ; mv ntcontab.o /oracle/SAP1/1020_64/lib/ ; /bin/ar -X64 rv
/oracle/SAP1/1020_64/lib/libn10.a /oracle/SAP1/1020_64/lib/ntcontab.o ; fi)
INFO: Assembler:
INFO: ntcontab.s: line 20: 1252-023 The symbol t1 is not defined.
ntcontab.s: line 20: 1252-040 The specified expression is not valid.
Make sure that all symbols are defined.
Check the rules on symbols used in an arithmetic expression
concerning relocation.
INFO: make: 1254-004 The error code from the last command is 1.
Stop.
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'ntcontab.o' of makefile '/oracle/SAP1/1020_64/network/lib/ins_net_client.mk'. See '/oracle/SAP1/oraInventory/logs/installActions2008-05-16_03-23-23PM.log' for details.
Exception Severity: 1
make -f ins_net_client.mk install
/bin/chmod 755 /oracle/SAP1/920_64/bin/
- Linking
rm -f trcroute
ld -b64 -o trcroute -L/oracle/SAP1/920_64/network/lib/ -L/oracle/SAP1/920_64/lib/ /oracle/SAP1/920_64/network/lib/s0nur.o /oracle/SAP1/920_64/network/lib/nur.o `cat /oracle/SAP1/920_64/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lnro9 `cat /oracle/SAP1/920_64/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lclient9 -lvsn9 -lwtc9 -lcommon9 -lgeneric9 -lwtc9 -lmm -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9 `cat /oracle/SAP1/920_64/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lnro9 `cat /oracle/SAP1/920_64/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lclient9 -lvsn9 -lwtc9 -lcommon9 -lgeneric9 -lpls9 -ltrace9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9 -lclient9 -lvsn9 -lwtc9 -lcommon9 -lgeneric9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9 -lld -lm `cat /oracle/SAP1/920_64/lib/sysliblist` -lm `if [ "\`/usr/bin/uname -v\`" = "4" ]; \
then echo "-bI:/oracle/SAP1/920_64/lib/pw-syscall.exp"; fi;` -lxsd9 /oracle/SAP1/920_64/lib/nautab.o /oracle/SAP1/920_64/lib/naeet.o /oracle/SAP1/920_64/lib/naect.o /oracle/SAP1/920_64/lib/naedhs.o /oracle/SAP1/920_64/rdbms/lib/defopt.o -lmm
mv -f /oracle/SAP1/920_64/bin/trcroute /oracle/SAP1/920_64/bin/trcroute0
mv trcroute /oracle/SAP1/920_64/bin/trcroute
/bin/chmod 751 /oracle/SAP1/920_64/bin/trcroute
make: 1254-002 Cannot find a rule to create target ionrsd from dependencies.
Stop.
But the ENV: LIBRARY_PATH=/oracle/SAP1/920_64
i have delete with export LIBRARY_PATH=
before i run the runInstaller
If i set the ORACLE_HOME and LIBRARY_PATH
the i can see this:
make -f ins_net_client.mk install
/bin/chmod 755 /oracle/SAP1/1020_64/bin/
- Linking trcroute
rm -f trcroute
ld -b64 -o trcroute -L/oracle/SAP1/1020_64/network/lib/ -L/oracle/SAP1/1020_64/lib/ /oracle/SAP1/1020_64/network/lib/s0nur.o /oracle/SAP1/1020_64/network/lib/nur.o `cat /oracle/SAP1/1020_64/lib/ldflags` -lnsslb10 -lncrypt10 -lnsgr
10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /oracle/SAP1/1020_64/lib/ldflags` -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclieSAP10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lmm -lsnls10 -lnls10 -lcore10 -lsnls10
-lnls10 -lcore10 -lsnls10 -lnls10 -lxml10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /oracle/SAP1/1020_64/lib/ldflags` -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /oracle/SAP1/1020_64/lib/ldf
lags` -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclieSAP10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lpls10 -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lxml10 -lcore10 -lunls10 -lsnls
10 -lnls10 -lcore10 -lnls10 -lclieSAP10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lxml10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 -lld -lm `cat /oracle
/SAP1/1020_64/lib/sysliblist` -lm `if [ "\`/usr/bin/uname -v\`" = "4" ]; \
then echo "-bI:/oracle/SAP1/1020_64/lib/pw-syscall.exp"; fi;` /oracle/SAP1/1020_64/lib/nautab.o /oracle/SAP1/1020_64/lib/naeet.o /oracle/SAP1/1020_64/lib/naect.o /oracle/SAP1/1020_64/lib/naedhs.o /oracle/SAP1/1020_64/rdbms/lib/defopt.
o -lmm
mv -f /oracle/SAP1/1020_64/bin/trcroute /oracle/SAP1/1020_64/bin/trcroute0
mv trcroute /oracle/SAP1/1020_64/bin/trcroute
/bin/chmod 751 /oracle/SAP1/1020_64/bin/trcroute
- Linking
rm -f tnsping
ld -b64 -o tnsping -L/oracle/SAP1/1020_64/network/lib/ -L/oracle/SAP1/1020_64/lib/ /oracle/SAP1/1020_64/network/lib/s0nsping.o /oracle/SAP1/1020_64/network/lib/nsping.o `cat /oracle/SAP1/1020_64/lib/ldflags` -lnsslb10 -lncrypt10 -
lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /oracle/SAP1/1020_64/lib/ldflags` -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclieSAP10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lmm -lsnls10 -lnls10 -lcore10 -lsn
ls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lxml10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /oracle/SAP1/1020_64/lib/ldflags` -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /oracle/SAP1/1020_64/li
b/ldflags` -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclieSAP10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lpls10 -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lxml10 -lcore10 -lunls10 -
lsnls10 -lnls10 -lcore10 -lnls10 -lclieSAP10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lxml10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 -lld -lm `cat /o
racle/SAP1/1020_64/lib/sysliblist` -lm `if [ "\`/usr/bin/uname -v\`" = "4" ]; \
then echo "-bI:/oracle/SAP1/1020_64/lib/pw-syscall.exp"; fi;` /oracle/SAP1/1020_64/lib/nautab.o /oracle/SAP1/1020_64/lib/naeet.o /oracle/SAP1/1020_64/lib/naect.o /oracle/SAP1/1020_64/lib/naedhs.o /oracle/SAP1/1020_64/rdbms/lib/defopt.
o -lmm
mv -f /oracle/SAP1/1020_64/bin/tnsping /oracle/SAP1/1020_64/bin/tnsping0
mv tnsping /oracle/SAP1/1020_64/bin/tnsping
/bin/chmod 751 /oracle/SAP1/1020_64/bin/tnsping
Target "install" is up to date.
What did i wrong ?
The AIX is fresh bootet, without any oracle process start at boottime
Thanks and have a nice weekend
Dennis
Message was edited by:
user636686
Message was edited by:
user636686
Message was edited by:
user636686
Message was edited by:
user636686
Message was edited by:
user636686here are my env from the user i run the runInstaller:
STAGING_AREA=/oracle/stage/920_64
ORACLE_PSRV=SAP1
PATH=/oracle/SAP1/1020_64/bin:/usr/sap/NT1/SYS/exe/run:/bin:/usr/bin:/usr/sbin:/usr/bin/X11:/usr/ucb:/usr/ccs/b
in:/usr/local/bin:/etc:.
SAPBACKUP=/oracle/SAP1/sapbackup
ORACLE_BASE=/oracle
HISTFILE=/oracle/SAP1/.sh_history
TMP=/oracle/SAP1
SAPTRACE=/oracle/SAP1/saptrace
LIBARY_PATH=/oracle/SAP1/1020_64
ORACLE_SID=SAP1
SAPDATA_HOME=/oracle/SAP1
HOME=/oracle/SAP1
SAPARCH=/oracle/SAP1/saparch
ORACLE_HOME=/oracle/SAP1/1020_64
PWD=/oracle/dvd/Disk0/database/Disk1
ENV=/oracle/SAP1/.kshrc
SAPREORG=/oracle/SAP1/sapreorg
xlC.aix50.rte 9.0.0.5 COMMITTED XL C/C++ Runtime for AIX 5.2
xlC.rte 9.0.0.5 COMMITTED XL C/C++ Runtime
xlC.cpp 6.0.0.0 COMMITTED C for AIX Preprocessor
xlC.msg.en_US.cpp 6.0.0.0 COMMITTED C for AIX Preprocessor
gcc-4.2.0-3 -
Error in invoking target 'ntcontab.o on linux while patch application
Please help me to resolve this issue.
I am getting the Error in invoking target 'ntcontab.o' while upgrading the oracle database 10.2.0.1 to 10.2.0.4 on linux 5 x86 machine
Exception Name: MakefileException
Exception String: Error in invoking target 'ntcontab.o' of makefile '/u01/app/oracle/product/10.2.0/db_1/network/lib/ins_net_client.mk'. See '/u01/app/oracle/oraInventory/logs/installActions2009-02-13_10-24-42PM.log' for details.
Exception Severity: 1Duplicate Thread
Re: Error in invoking target 'ntcontab.o' while applying patch 10.2.0.4 on lin -
Please help me to resolve this issue.
I am getting the Error in invoking target 'ntcontab.o' while upgrading the oracle database 10.2.0.1 to 10.2.0.4
Exception Name: MakefileException
Exception String: Error in invoking target 'ntcontab.o' of makefile '/u01/app/oracle/product/10.2.0/db_1/network/lib/ins_net_client.mk'. See '/u01/app/oracle/oraInventory/logs/installActions2009-02-13_10-24-42PM.log' for details.
Exception Severity: 1See '/u01/app/oracle/oraInventory/logs/installActions2009-02-13_10-24-42PM.log' for details.Can you update the thread with the error in this log?
-
URGENT - Installing 817 - redhat 7.1 Gives Error in invoking target ntcontab.o
Hi All,
I have installed Redhat 7.1 and I am trying to install oracle 817 ee over it.
after finishing all pre install requirments I succedded to start the installer
- I installed jdk 118 v3
- I added the Display and assume_kernel parameters to bash file
but at the middle of setup it is giving the following error
"Error in invoking target ntcontab.o of makefile
/boot/u01/app/oracle/product/8.1.7/network/lib/ins_net_client.mk" and I tried to reply but it comes again
here is the install log file
"Starting install link phase of component Net8 Required Support Files
Calling action unixActions1.7.1.5.0 registerForMake
installMakePath = /usr/bin/make
installMakeFileName =
/boot/u01/app/oracle/product/8.1.7/network/lib/ins_net_client.mk
installTarget = mkldflags
installArguments = ORACLE_HOME=/boot/u01/app/oracle/product/8.1.7,
undoMakeFileName = null
undoTarget = null
undoArguments = null
logFile = /boot/u01/app/oracle/product/8.1.7/install/make.log
progMsg = Linking ldflags
Calling action unixActions1.7.1.5.0 make
installMakePath = /usr/bin/make
installMakeFileName =
/boot/u01/app/oracle/product/8.1.7/network/lib/ins_net_client.mk
installTarget = ntcontab.o
installArguments = ORACLE_HOME=/boot/u01/app/oracle/product/8.1.7,
undoMakeFileName = null
undoTarget = null
undoArguments = null
logFile = /boot/u01/app/oracle/product/8.1.7/install/make.log
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target ntcontab.o of makefile
/boot/u01/app/oracle/product/8.1.7/network/lib/ins_net_client.mk
Exception Severity: 1
Exception handling set to prompt user with options to RETRY IGNORE"
please tell me what can I do to overcome this taking into consideration that I have downloaded and executed oracle patch published at otn.oracle.com
waiting for your replycheck these
rpm -q compat-libs
rpm -q compat-glibc
rpm -q compat-egcs -
Installation error - Error in invoking target 'ntcontab.o'
OS: RHEL 5 64bit
Oracle 10g (10.2.0.1.0)
Error in invoking target 'ntcontab.o' of makefile '/u01/app/oracle/product/10.2.0/db_1/network/lib/ins_net_client.mk'. See '/u01/app/oracle/oraInventory/logs/installActions2010-07-27_07-58-23AM.log' for details.
INFO: Start output from spawned process:
INFO: ----------------------------------
INFO:
INFO: rm -f ntcontab.*
INFO: (if [ "compile" = "compile" ] ; then \
/u01/app/oracle/product/10.2.0/db_1/bin/gennttab > ntcontab.c ;\
gcc -c ntcontab.c ;\
rm -f /u01/app/oracle/product/10.2.0/db_1/lib/ntcontab.o ;\
mv ntcontab.o /u01/app/oracle/product/10.2.0/db_1/lib/ ;\
/usr/bin/ar rv /u01/app/oracle/product/10.2.0/db_1/lib/libn10.a /u01/app/oracle/product/10.2.0/db_1/lib/ntcontab.o ; fi)
INFO: /bin/sh: line 2: /usr/bin/gcc: Permission denied
INFO: mv: cannot stat `ntcontab.o'
INFO: : No such file or directory
INFO: /usr/bin/ar: /u01/app/oracle/product/10.2.0/db_1/lib/ntcontab.o: No such file or directory
INFO: make: *** [ntcontab.o] Error 1
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'ntcontab.o' of makefile '/u01/app/oracle/product/10.2.0/db_1/network/lib/ins_net_client.mk'. See '/u01/app/oracle/oraInventory/logs/installActions2010-07-27_07-58-23AM.log' for details.
Exception Severity: 1Checking Packages (RPMs)
You will need some RPM development packages for the Oracle installer to build the Oracle modules, otherwise you will get error messages similar to this one:
Error in invoking target ntcontab.o of makefile
/u01/app/oracle/product/9.2.0/network/lib/ins_net_client.mk
NOTE: Always ensure to use the latest RPM versions!
Packages (RPMs) for RH 7.1, 7.2, and RH AS 2.1:
To see if these development packages are installed on your server, run the following command:
rpm -q gcc cpp compat-libstdc++ glibc-devel kernel-headers binutils
For instance, most of these packages will be missing when you installed RedHat 2.1 Advanced Server and if you did not select the "Software Development" package. For the RedHat 2.1 Advanced Server I executed the following commands to install the missing RPMs from the two CDs:
su - root
rpm -ivh cpp-2.96-108.1.i386.rpm \
glibc-devel-2.2.4-26.i386.rpm \
kernel-headers-2.4.9-e.3.i386.rpm \
gcc-2.96-108.1.i386.rpm \
binutils-2.11.90.0.8-12.i386.rpm -
Hello All.
I am trying to install Oracle Application Server 10g release 2(1.2.0.2) on
Red Hat Enterprise Linux ES Release 4 64 bits. But got the following errors.
End output from spawned process.
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'dm_on ioracle' of makefile '/oracle/ias/infra10g1202/rdbms/lib/ins_rdbms.mk'.
See '/oracle/ias/oraInventory/logs/installActions2006-08-07_01-55-22AM.log' for details.
Exception Severity: 1
My OS is
$>cat /etc/issue
Red Hat Enterprise Linux ES release 4 (Nahant Update 3)
$>cat /etc/redhat-release
Red Hat Enterprise Linux ES release 4 (Nahant Update 3)
According to Oracle Application server installation guide 10g release 2 (10.1.2) for linux x86 B19310-01 (page 4-11)
The Software requirements for red hat enterprise linux AS/ES 4.0 system is
http://www.oracle.com/technology/products/ias/bpel/documents/b16226.pdf
glibc-2.3.4-2.19
glibc-common-2.3.4-2.19
binutils-2.15.92.0.2-18
compat-libstdc++-296-2.96-132.7.2
gcc-3.4.5-2
gcc-c++-3.4.5-2
libstdc++-3.4.5-2
libstdc++-devel-3.4.5-2
openmotif21-2.1.30-11.RHEL4.5
pdksh-5.2.14-30.3
setarch-1.6-1
make-3.80-5
gnome-libs-1.4.1.2.90-44.1
sysstat-5.0.5-7.rhel4
compat-db-4.1.25-9
control-center-2.8.0-12.rhel4.2
xscreensaver-4.18-5.rhel4.10
But the OU installer looking for compat-libstdc++-devel-7.3-2.96.128 and compat-libstdc++-7.3-2.96.128 packages. But they are not
mentioned in the requirement software for ES 4.0 and there is no one for ES 4.0. What i have to do.
Checking recommended operating system packages.
Checking for compat-libstdc++-devel-7.3-2.96.128; found Not found. Failed <<<<
Checking for compat-libstdc++-7.3-2.96.128; found Not found. Failed <<<<
The overall result of this check is: Failed<<<<
I tried to link them from another session but unsuccessful.I too had both these issues and a previous one (ntcontab.o of makefile ins_net_client.mk). Here's my 2 cents.
Installing OAS 10gR2 Infrastructure on RHEL 4 Update 4 64 bit.
I had the following, as per the Installation Guide and Release Notes.
binutils-2.15.92.0.2.21 (x86_64)
compat-db-4.1.25.9 (i386)
compat-db-4.1.25.9 (x86_64)
compat-gcc-32-3.2.3.47.3 (x86_64)
compat-gcc-32-c++-3.2.3.47.3 (x86_64)
compat-libgcc-296-2.96.132.7.2 (i386)
compat-libstdc++-33-3.2.3.47.3 (i386)
compat-libstdc++-33-3.2.3.47.3 (x86_64)
control-center-2.8.0.12.rhel4.5 (x86_64)
gcc-3.4.6.3.1 (i386)
gcc-c++-3.4.6.3.1 (x86_64)
glibc-2.3.4.2.25 (i686)
glibc-2.3.4.2.25 (x86_64)
glibc-common-2.3.4.2.25 (x86_64)
glibc-devel-2.3.4.2.25 (i386)
glibc-devel-2.3.4.2.25 (x86_64)
glibc-headers-2.3.4.2.25 (x86_64)
glibc-kernheaders-2.4.9.1.98.EL (x86_64)
gnome-libs-1.4.1.2.90.44.1 (x86_64)
libgcc-3.4.6.3.1 (i386)
libgcc-3.4.6.3.1 (x86_64)
libstdc++-3.4.6.3.1 (i386)
libstdc++-3.4.6.3.1 (x86_64)
libstdc++-devel-3.4.6.3.1 (i386)
libstdc++-devel-3.4.6.3.1 (x86_64)
make-3.80.6.EL4 (i386)
make-3.80.6.EL4 (x86_64)
openmotif-2.2.3.10.RHEL4.5 (i386)
openmotif-2.2.3.10.RHEL4.5 (x86_64)
openmotif21-2.1.30.11.RHEL4.6 (i386)
pdksh-5.2.14.30.3 (i386)
pdksh-5.2.14.30.3 (x86_64)
setarch-1.6.1 (i386)
setarch-1.6.1 (x86_64)
sysstat-5.0.5.11.rhel4 (x86_64)
xscreensaver-4.18.5.rhel4.11 (x86_64)
I encountered the first error. Followed the fix of note 400301.1 (to rename/replace your current gcc binary with a script wrapper for gcc32) ; clicked on "Retry" and... it passed! But then error dm_on ioracle appeared.
I undo'ed the change of gcc (e.g.: renaming my gcc script and reverting to my gcc binary), and immediately installed the following packages; I believed they are not mentioned in the notes:
compat-glibc-2.3.2-95.30.i386
compat-glibc-2.3.2-95.30.x86_64
compat-glibc-headers.2.3.2-95.30.x86_64
gcc-3.4.6-3.1.x86_64
clicked "Retry" and.... it progressed further!
But then I stumbled upon other errors. The logs mentioned something about ld execution not finding -libgcc. I stopped the installation and proceeded to install:
libgcc-3.4.6-3.1.i386
libgcc-3.4.6-3.1.x86_64
I then started the installer from scratch, and the installation was successful!
So ideally, I guess you need:
- All the packages mentioned in this post
- The partial workaround of note 400301.1 SHOULD NOT BE NEEDED.
- Regarding individual packages, be careful that you update (rpm -Uvh) and not install (rpm -ivh) your packages. Try re-installing (or I should say, re-updating) using --force if you already have them there.
Just for the record, nowhere in the documentation are these packages mentioned. I deducted these by comparing the installed rpm's on a server I had previously configured: it was pre-set to host a 10gR2 64bit database (with all it's required rpm's), but was changed to host a OAs10gR2 at the last minute. That's why that installation gave me no headaches.
I hope my notes are clear and useful for you, I'm just extatic that it finally worked :)
Greetings!
Message was edited by:
chibione -
Hello all,
I am attempting to install Oracle12c GI on two virtual nodes (in Fusion VMware) and am getting the following error message (Both nodes are configured exactly the same):
INFO: Start output from spawned process:
INFO: ----------------------------------
INFO:
INFO:
INFO: - Linking recovery manager (rman)
INFO: rm -f /opt/oragrid/rdbms/lib/rman
INFO: /opt/oragrid/bin/orald -o /opt/oragrid/rdbms/lib/rman -m64 -z noexecstack -Wl,--disable-new-dtags -L/opt/oragrid/rdbms/lib/ -L/opt/oragrid/lib/ -L/opt/oragrid/lib/stubs/ /opt/oragrid/lib/s0main.o /opt/oragrid/rdbms/lib/sskrmed.o /opt/oragrid/rdbms/lib/skrmpt.o -ldbtools12 -lclient12 -lsql12 -lpls12 -lrt -lplp12 -lsnls12 -lunls12 -lnls12 -lslax12 -lpls12 -lrt -lplp12 /opt/oragrid/lib/libplc12.a -lclntsh -lclntshcore `cat /opt/oragrid/lib/ldflags` -lncrypt12 -lnsgr12 -lnzjs12 -ln12 -lnl12 -lnro12 `cat
INFO: /opt/oragrid/lib/ldflags` -lncrypt12 -lnsgr12 -lnzjs12 -ln12 -lnl12 -lnnz12 -lzt12 -lztkg12 -lztkg12 -lclient12 -lnnetd12 -lvsn12 -lcommon12 -lgeneric12 -lmm -lsnls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lxml12 -lcore12 -lunls12 -lsnls12 -lnls12 -lcore12 -lnls12 `cat /opt/oragrid/lib/ldflags` -lncrypt12 -lnsgr12 -lnzjs12 -ln12 -lnl12 -lnro12 `cat /opt/oragrid/lib/ldflags` -lncrypt12 -lnsgr12 -lnzjs12 -ln12 -lnl12 -lclient12 -lnnetd12 -lvsn12 -lcommon12 -lgeneric12 -lsn
INFO: ls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lxml12 -lcore12 -lunls12 -lsnls12 -lnls12 -lcore12 -lnls12 -lclient12 -lnnetd12 -lvsn12 -lcommon12 -lgeneric12 -lsnls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lxml12 -lcore12 -lunls12 -lsnls12 -lnls12 -lcore12 -lnls12 `cat /opt/oragrid/lib/sysliblist` -Wl,-rpath,/opt/oragrid/lib -lm `cat /opt/oragrid/lib/sysliblist` -ldl -lm -L/opt/oragrid/lib
INFO: test ! -f /opt/oragrid/bin/rman ||\
mv -f /opt/oragrid/bin/rman /opt/oragrid/bin/rmanO
INFO: mv /opt/oragrid/rdbms/lib/rman /opt/oragrid/bin/rman
INFO: chmod 751 /opt/oragrid/bin/rman
INFO: chmod 755 /opt/oragrid/bin
INFO:
INFO: - Linking Oracle
INFO: rm -f /opt/oragrid/rdbms/lib/oracle
INFO: /opt/oragrid/bin/orald -o /opt/oragrid/rdbms/lib/oracle -m64 -z noexecstack -Wl,--disable-new-dtags -L/opt/oragrid/rdbms/lib/ -L/opt/oragrid/lib/ -L/opt/oragrid/lib/stubs/ -Wl,-E /opt/oragrid/rdbms/lib/opimai.o /opt/oragrid/rdbms/lib/ssoraed.o /opt/oragrid/rdbms/lib/ttcsoi.o -Wl,--whole-archive -lperfsrv12 -Wl,--no-whole-archive /opt/oragrid/lib/nautab.o /opt/oragrid/lib/naeet.o /opt/oragrid/lib/naect.o /opt/oragrid/lib/naedhs.o /opt/oragrid/rdbms/lib/config.o -lserver12 -lodm12 -lcell12 -lnnet12 -lskgx
INFO: p12 -lsnls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lxml12 -lcore12 -lunls12 -lsnls12 -lnls12 -lcore12 -lnls12 -lclient12 -lvsn12 -lcommon12 -lgeneric12 -lknlopt `if /usr/bin/ar tv /opt/oragrid/rdbms/lib/libknlopt.a | grep xsyeolap.o > /dev/null 2>&1 ; then echo "-loraolap12" ; fi` -lskjcx12 -lslax12 -lpls12 -lrt -lplp12 -lserver12 -lclient12 -lvsn12 -lcommon12 -lgeneric12 `if [ -f /opt/oragrid/lib/libavserver12.a ] ; then echo "-lavserver12" ; else echo "-lavstub12"; fi` `if [ -f
INFO: /opt/oragrid/lib/libavclient12.a ] ; then echo "-lavclient12" ; fi` -lknlopt -lslax12 -lpls12 -lrt -lplp12 -ljavavm12 -lserver12 -lwwg `cat /opt/oragrid/lib/ldflags` -lncrypt12 -lnsgr12 -lnzjs12 -ln12 -lnl12 -lnro12 `cat /opt/oragrid/lib/ldflags` -lncrypt12 -lnsgr12 -lnzjs12 -ln12 -lnl12 -lnnzst12 -lzt12 -lztkg12 -lmm -lsnls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lxml12 -lcore12 -lunls12 -lsnls12 -lnls12 -lcore12 -lnls12 -lztkg12 `cat /opt/oragrid/lib/ldflags` -lncrypt12
INFO: -lnsgr12 -lnzjs12 -ln12 -lnl12 -lnro12 `cat /opt/oragrid/lib/ldflags` -lncrypt12 -lnsgr12 -lnzjs12 -ln12 -lnl12 -lnnzst12 -lzt12 -lztkg12 -lsnls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lxml12 -lcore12 -lunls12 -lsnls12 -lnls12 -lcore12 -lnls12 `if /usr/bin/ar tv /opt/oragrid/rdbms/lib/libknlopt.a | grep "kxmnsd.o" > /dev/null 2>&1 ; then echo " " ; else echo "-lordsdo12"; fi` -L/opt/oragrid/ctx/lib/ -lctxc12 -lctx12 -lzx12 -lgx12 -lctx12 -lzx12 -lgx12 -lordimt12 -lclsra12 -ldbc
INFO: fg12 -lhasgen12 -lskgxn2 -lnnzst12 -lzt12 -lxml12 -locr12 -locrb12 -locrutl12 -lhasgen12 -lskgxn2 -lnnzst12 -lzt12 -lxml12 -lgeneric12 -loraz -llzopro -lorabz2 -lipp_z -lipp_bz2 -lippdcemerged -lippsemerged -lippdcmerged -lippsmerged -lippcore -lippcpemerged -lippcpmerged -lsnls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lxml12 -lcore12 -lunls12 -lsnls12 -lnls12 -lcore12 -lnls12 -lsnls12 -lunls12 -lsnls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lcore12 -lsnls12 -lnls12 -lxml12 -lcore12
INFO: -lunls12 -lsnls12 -lnls12 -lcore12 -lnls12 -lasmclnt12 -lcommon12 -lcore12 -laio -lons `cat /opt/oragrid/lib/sysliblist` -Wl,-rpath,/opt/oragrid/lib -lm `cat /opt/oragrid/lib/sysliblist` -ldl -lm -L/opt/oragrid/lib
INFO: /
INFO: usr
INFO: /
INFO: bin
INFO: /
INFO: ld
INFO: :
INFO:
INFO: cannot
INFO:
INFO: find
INFO:
INFO: -
INFO: ljavavm12
INFO:
INFO: collect2:
INFO: ld returned 1 exit status
INFO:
INFO: make: *** [/opt/oragrid/rdbms/lib/oracle] Error 1
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'irman ioracle' of makefile '/opt/oragrid/rdbms/lib/ins_rdbms.mk'. See '/opt/oraInventory/logs/installActions2013-11-25_04-25-06PM.log' for details.
Exception Severity: 1
Below are my VM specs:
**************************************************************Installed RPM's*****************************************************************
cat /etc/redhat-release
Red Hat Enterprise Linux Server release 6.4 (Santiago)
rpm -qa gcc
gcc-4.4.7-3.el6.x86_64
rpm -qa make
make-3.81-20.el6.x86_64
rpm -qa|grep oracle
oracleasmlib-2.0.4-1.el6.x86_64
oracle-logos-60.0.14-1.0.1.el6.noarch
oracle-rdbms-server-12cR1-preinstall-1.0-8.el6.x86_64
kmod-oracleasm-2.0.6.rh1-2.el6.x86_64
oraclelinux-release-notes-6Server-9.x86_64
oraclelinux-release-6Server-4.0.4.x86_64
oracleasm-support-2.1.8-1.el6.x86_64
***************************************************************JAVA***************************************************************************
java version "1.7.0_45"
Java(TM) SE Runtime Environment (build 1.7.0_45-b18)
Java HotSpot(TM) 64-Bit Server VM (build 24.45-b08, mixed mode)
*************************************************************SYSCTL**************************************************************************
# Kernel sysctl configuration file for Red Hat Linux
# For binary values, 0 is disabled, 1 is enabled. See sysctl(8) and
# sysctl.conf(5) for more details.
# Controls IP packet forwarding
net.ipv4.ip_forward = 0
# Controls source route verification
net.ipv4.conf.default.rp_filter = 1
# Do not accept source routing
net.ipv4.conf.default.accept_source_route = 0
# Controls the System Request debugging functionality of the kernel
kernel.sysrq = 0
# Controls whether core dumps will append the PID to the core filename.
# Useful for debugging multi-threaded applications.
kernel.core_uses_pid = 1
kernel.core_pattern=/var/adm/crash/cores/%e.sig%s
# Controls the use of TCP syncookies
net.ipv4.tcp_syncookies = 1
# Disable netfilter on bridges.
net.bridge.bridge-nf-call-ip6tables = 0
net.bridge.bridge-nf-call-iptables = 0
net.bridge.bridge-nf-call-arptables = 0
# Controls the default maxmimum size of a mesage queue
kernel.msgmnb = 65536
# Controls the maximum size of a message, in bytes
kernel.msgmax = 65536
# Controls the maximum shared segment size, in bytes
# Controls the maximum number of shared memory segments, in pages
kernel.shmall = 4294967296
# oracle-rdbms-server-12cR1-preinstall setting for fs.file-max is 6815744
fs.file-max = 6815744
# oracle-rdbms-server-12cR1-preinstall setting for kernel.sem is '250 32000 100 128'
kernel.sem = 250 32000 100 128
# oracle-rdbms-server-12cR1-preinstall setting for kernel.shmmni is 4096
kernel.shmmni = 4096
# oracle-rdbms-server-12cR1-preinstall setting for kernel.shmall is 1073741824 on x86_64
# oracle-rdbms-server-12cR1-preinstall setting for kernel.shmmax is 4398046511104 on x86_64
kernel.shmmax = 4398046511104
# oracle-rdbms-server-12cR1-preinstall setting for net.core.rmem_default is 262144
net.core.rmem_default = 262144
# oracle-rdbms-server-12cR1-preinstall setting for net.core.rmem_max is 4194304
net.core.rmem_max = 4194304
# oracle-rdbms-server-12cR1-preinstall setting for net.core.wmem_default is 262144
net.core.wmem_default = 262144
# oracle-rdbms-server-12cR1-preinstall setting for net.core.wmem_max is 1048576
net.core.wmem_max = 1048576
# oracle-rdbms-server-12cR1-preinstall setting for fs.aio-max-nr is 1048576
fs.aio-max-nr = 1048576
# oracle-rdbms-server-12cR1-preinstall setting for net.ipv4.ip_local_port_range is 9000 65500
net.ipv4.ip_local_port_range = 9000 65500
# The below entries were added and deal with an r_filtering issue oracle wants private interconnects set loose
net.ipv4.conf.eth4.rp_filter = 2
net.ipv4.conf.eth6.rp_filter = 2
net.ipv4.conf.eth1.rp_filter = 1
*************************************************************Filesystem************************************************************************
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/vg_oracle12c-lv_root
8.9G 3.5G 5.0G 42% /
tmpfs 2.2G 0 2.2G 0% /dev/shm
/dev/sda1 485M 101M 359M 22% /boot
/dev/mapper/vg_oracle12c-lv_home
2.0G 70M 1.9G 4% /home
/dev/mapper/vg_oracle12c-lv_tmp
4.5G 541M 3.7G 13% /tmp
/dev/mapper/vg_oracle12c-lv_var
5.0G 956M 3.8G 20% /var
/dev/mapper/oracle_vg-oragrid
20G 5.0G 14G 27% /opt/oragrid
.host:/ 466G 137G 330G 30% /mnt/hgfs
*******************************************************************CPU INFO*******************************************************************************
cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 70
model name : Intel(R) Core(TM) i7-4850HQ CPU @ 2.30GHz
stepping : 1
cpu MHz : 2294.967
cache size : 6144 KB
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts mmx fxsr sse sse2 ss syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts nopl xtopology tsc_reliable nonstop_tsc aperfmperf pni pclmulqdq ssse3 fma cx16 sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand hypervisor lahf_lm ida arat epb xsaveopt pln pts dts fsgsbase smep
bogomips : 4589.93
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 70
model name : Intel(R) Core(TM) i7-4850HQ CPU @ 2.30GHz
stepping : 1
cpu MHz : 2294.967
cache size : 6144 KB
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts mmx fxsr sse sse2 ss syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts nopl xtopology tsc_reliable nonstop_tsc aperfmperf pni pclmulqdq ssse3 fma cx16 sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand hypervisor lahf_lm ida arat epb xsaveopt pln pts dts fsgsbase smep
bogomips : 4589.93
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management:
processor : 2
vendor_id : GenuineIntel
cpu family : 6
model : 70
model name : Intel(R) Core(TM) i7-4850HQ CPU @ 2.30GHz
stepping : 1
cpu MHz : 2294.967
cache size : 6144 KB
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts mmx fxsr sse sse2 ss syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts nopl xtopology tsc_reliable nonstop_tsc aperfmperf pni pclmulqdq ssse3 fma cx16 sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand hypervisor lahf_lm ida arat epb xsaveopt pln pts dts fsgsbase smep
bogomips : 4589.93
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management:
processor : 3
vendor_id : GenuineIntel
cpu family : 6
model : 70
model name : Intel(R) Core(TM) i7-4850HQ CPU @ 2.30GHz
stepping : 1
cpu MHz : 2294.967
cache size : 6144 KB
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts mmx fxsr sse sse2 ss syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts nopl xtopology tsc_reliable nonstop_tsc aperfmperf pni pclmulqdq ssse3 fma cx16 sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand hypervisor lahf_lm ida arat epb xsaveopt pln pts dts fsgsbase smep
bogomips : 4589.93
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management:
*******************************************************************************Memory************************************************************************
free -m
total used free shared buffers cached
Mem: 4331 3972 359 0 30 3412
-/+ buffers/cache: 530 3801
Swap: 14323 0 14323
****************************************************************************Network***************************************************************************
Note eth0 is NAT and used for internet connectivity, eth1 is the public network (static and accessible to the hypervising machine running fusion ), eth4 and and eth6 are private, and eth3 is connected to an openfiler storage appliance (This is also a VM serving out ISCSI targets).
eth0 Link encap:Ethernet HWaddr 00:50:56:22:C6:91
inet addr:192.168.90.140 Bcast:192.168.90.255 Mask:255.255.255.0
inet6 addr: fe80::250:56ff:fe22:c691/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:227 errors:0 dropped:0 overruns:0 frame:0
TX packets:225 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:24414 (23.8 KiB) TX bytes:18545 (18.1 KiB)
eth1 Link encap:Ethernet HWaddr 00:50:56:3A:AE:95
inet addr:192.168.3.2 Bcast:192.168.3.255 Mask:255.255.255.0
inet6 addr: fe80::250:56ff:fe3a:ae95/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:482561 errors:0 dropped:0 overruns:0 frame:0
TX packets:450616 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:483728272 (461.3 MiB) TX bytes:501489666 (478.2 MiB)
eth3 Link encap:Ethernet HWaddr 00:50:56:24:40:AB
inet addr:192.168.5.2 Bcast:192.168.5.255 Mask:255.255.255.0
inet6 addr: fe80::250:56ff:fe24:40ab/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4944 errors:0 dropped:0 overruns:0 frame:0
TX packets:3817 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:6186232 (5.8 MiB) TX bytes:346478 (338.3 KiB)
eth4 Link encap:Ethernet HWaddr 00:50:56:3F:77:AA
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::250:56ff:fe3f:77aa/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1222 errors:0 dropped:0 overruns:0 frame:0
TX packets:978 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:205198 (200.3 KiB) TX bytes:168464 (164.5 KiB)
eth6 Link encap:Ethernet HWaddr 00:50:56:22:72:E3
inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::250:56ff:fe22:72e3/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:354 errors:0 dropped:0 overruns:0 frame:0
TX packets:116 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:54390 (53.1 KiB) TX bytes:17992 (17.5 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:194338 errors:0 dropped:0 overruns:0 frame:0
TX packets:194338 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:920534042 (877.8 MiB) TX bytes:920534042 (877.8 MiB)
*****************************************************************************ORACLE ASM AND MULTIPATH INFO********************************************
/etc/init.d/oracleasm listdisks
VOTE1
VOTE2
VOTE3
vote3 (14f504e46494c45523434517a65422d4b6364682d57544f65) dm-8 OPNFILER,VIRTUAL-DISK
size=3.0G features='0' hwhandler='0' wp=rw
`-+- policy='round-robin 0' prio=1 status=active
`- 3:0:0:2 sdh 8:112 active ready running
vote2 (14f504e46494c45526e6c6a48324a2d6a4347462d7a465074) dm-6 OPNFILER,VIRTUAL-DISK
size=3.0G features='0' hwhandler='0' wp=rw
`-+- policy='round-robin 0' prio=1 status=active
`- 3:0:0:1 sdg 8:96 active ready running
vote1 (14f504e46494c45525763646753422d594262512d414a6275) dm-7 OPNFILER,VIRTUAL-DISK
size=3.0G features='0' hwhandler='0' wp=rw
`-+- policy='round-robin 0' prio=1 status=active
`- 3:0:0:0 sdf 8:80 active ready running
If any more information is necessary please request and I will provide, as you can see there is more than enough memory and disk space for the installation. The only exception being that I am using a different 'oraInventory', 'gridhome', and 'oraBase'. I have looked closely at the output and the problem seems to be a file called 'ljavavm12', I have highlighted the line in bold above in the log output. Any help with this would be greatly appreciated.
Regards,
AlexResolved my own issue,
for anyone else having the same problem, here is how it was resolved:
ljavavm12 is part of libjavavm12.a, for some reason this file was not copied into the $GRID_HOME, after doing so make went through fine.
'cp /opt/oragrid/javavm/jdk/jdk7/lib/libjavavm12.a /opt/oragrid/lib/'
Alex, -
Error in invoking target 'agent nmhs' of makefile - during 11g Installation
Hi guys~
I've just installed 11g (x64) on Fedora 13 (x64)
but during the installation there was an error.
Error in invoking target 'agent nmhs' of makefile
*'/u01/app/.../sysman/lib/ins_emagent.mk'*
This is the log file
[http://lyh913.tistory.com/attachment/[email protected]]
When oracle checked prerequisite packages, there was 8 failed packages such as libaio(i386), libgcc(i386) etc. I installed all of them (i686) with yum, but failed status didn't change. so I ignore them.
And then Error in invoking target 'agent nmhs' of makefile occured
Acturally I was able to excute sqlplus successfully but I'm curious that it is okay with this error.
I think there gonna be a problem sooner or later.
Is there anybody who can help me out? Please~ :-)
Anyway thanks for reading and sorry for my poor English(English isn't my mother tongue)Satish Kandi wrote:
The pre-requisite check has to succeed for the setup to complete successfully (with exceptions).
Have you tried installing the packages without yum?Thank you Satish Kandi~
I tried to download rpm packages and install them after your reply.
But Fedora said that they are already installed.
Failed prerequisite packages were
libaio-0.3.105, compat-libstdc++-33-3.2.3, libaio-devel-0.3.105, libgcc-3.4.6
libstdc++-3.46, unixODBC-2.2.11, unixODBC-devel-2.2.11, pdksh-5.2.14
And I've got these packages.
[root@localhost ~]# rpm -qa | grep i686
nss-softokn-freebl-3.12.4-17.fc13.i686
libtool-ltdl-2.2.6-20.fc13.i686
numactl-devel-2.0.3-8.fc13.i686
libgcc-4.4.4-2.fc13.i686
ksh-20100309-3.fc13.i686
compat-libstdc++-33-3.2.3-68.i686
readline-6.1-2.fc13.i686
libaio-devel-0.3.109-2.fc13.i686
libstdc++-4.4.4-2.fc13.i686
unixODBC-2.2.14-11.fc13.i686
numactl-2.0.3-8.fc13.i686
libaio-0.3.109-2.fc13.i686
unixODBC-devel-2.2.14-11.fc13.i686
glibc-2.12-1.i686
ncurses-libs-5.7-7.20100130.fc13.i686
At first 'glibc(it requires i686)' was failed status but after I installed glibc-2.12-1.i686, it became succeed.
The other packages require i386. Does this mean I should install i386 packages?
Edited by: user10406944 on 2010. 6. 1 오전 3:52
Edited by: user10406944 on 2010. 6. 1 오전 3:52 -
Hello,
Doing an install of an Oracle 8.1.7 database on a Linux SLES8 SP2a
After I run the runinstaller, I've a problem !
The message:
Error in invoking target ntcontab.o of make file ¤ORACLE_HOME/network/lib/ins_net_client.mk
I install the glibc-2.1.3-stubs OK
I run ./setup_stubs.sh then in the graphical environnement RETRY
but I've the same problem !
Any ideas ? What is going on ?
Philippehey, i found something about gcc and that you have to link two files yourself, everything has gone well up until i tried to link the second file and got the error:
/usr/bin/ld: cannot find -lxml10-lunls10
collect2: ld returned 1 exit status
The command i was trying to run was this:
linuxbox:/home/oracle# gcc -o /home/oracle/OraHome_1/rdbms/lib/extproc -L/home/oracle/OraHome_1/rdbms/lib/ -L/home/oracle/OraHome_1/lib/ -L/home/oracle/OraHome_1/lib/stubs/ /home/oracle/OraHome_1/rdbms/lib/hormc.o /home/oracle/OraHome_1/rdbms/lib/defopt.o /home/oracle/OraHome_1/rdbms/lib/homts.o -lagtsh -lpls10 -lplp10 -lclntsh -lcore10 -lxml10-lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 /home/oracle/OraHome_1/lib/libgeneric10.a `cat /home/oracle/OraHome_1/lib/sysliblist` -Wl,-rpath,/home/oracle/OraHome_1/lib -lm `cat /home/oracle/OraHome_1/lib/sysliblist` -ldl -lm -L/home/oracle/OraHome_1/lib -lvsn10 -lnro10
I'm not sure where the missing file is supposed to be, what it does or how to fix it. I'm just stuck now.
Any suggestions? -
Error in invoking target 'ntcontab.o' of make file.
Hi,
Operating System:Enterprise Linux Release 5 Update 2 for x86 (32 Bit)
Database:Oracle Database 10g Release 2 (10.2.0.1.0) for Linux x86
When I am trying to installt database on the VMware virtaul machine i am getting the following error durig the linking phase of installation(at 62%)
error in invoking target 'ntcontab.o' of make file.
I have googled for this error,but i didn't find any solution which fits my requirement.
I am hoping a expert advice from this forum for my problem.
Thank You all..Hi , I have all rpms installed on RHEL 5 but still getting below error...
/usr/bin/make -f ins_net_client.mk mkldflags ORACLE_HOME=/11gdb/app/db11gee/product/11.1.0/db_1//usr/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/11gdb/app/db11gee/product/11.1.0/db_1/rm -f ntcontab.*
(if [ "compile" = "compile" ] ; then \
/11gdb/app/db11gee/product/11.1.0/db_1/bin/gennttab > ntcontab.c ;\
/usr/bin/gcc -c ntcontab.c ;\
rm -f /11gdb/app/db11gee/product/11.1.0/db_1/lib/ntcontab.o ;\
mv ntcontab.o /11gdb/app/db11gee/product/11.1.0/db_1/lib/ ;\
/usr/bin/ar rv /11gdb/app/db11gee/product/11.1.0/db_1/lib/libn11.a /11gdb/app/db11gee/product/11.1.0/db_1/lib/ntcontab.o ; fi)
In file included from /usr/include/sys/types.h:31,
from ntcontab.c:7:
/usr/include/bits/types.h:31:20: error: stddef.h: No such file or directory
mv: cannot stat `ntcontab.o': No such file or directory
/usr/bin/ar: /11gdb/app/db11gee/product/11.1.0/db_1/lib/ntcontab.o: No such file or directory
make: *** [ntcontab.o] Error 1
/usr/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/11gdb/app/db11gee/product/11.1.0/db_1/rm -f ntcontab.*
(if [ "compile" = "compile" ] ; then \
/11gdb/app/db11gee/product/11.1.0/db_1/bin/gennttab > ntcontab.c ;\
/usr/bin/gcc -c ntcontab.c ;\
rm -f /11gdb/app/db11gee/product/11.1.0/db_1/lib/ntcontab.o ;\
mv ntcontab.o /11gdb/app/db11gee/product/11.1.0/db_1/lib/ ;\
/usr/bin/ar rv /11gdb/app/db11gee/product/11.1.0/db_1/lib/libn11.a /11gdb/app/db11gee/product/11.1.0/db_1/lib/ntcontab.o ; fi)
In file included from /usr/include/sys/types.h:31,
from ntcontab.c:7:
/usr/include/bits/types.h:31:20: error: stddef.h: No such file or directory
mv: cannot stat `ntcontab.o': No such file or directory
/usr/bin/ar: /11gdb/app/db11gee/product/11.1.0/db_1/lib/ntcontab.o: No such file or directory
make: *** [ntcontab.o] Error 1
/usr/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/11gdb/app/db11gee/product/11.1.0/db_1/rm -f ntcontab.*
(if [ "compile" = "compile" ] ; then \
/11gdb/app/db11gee/product/11.1.0/db_1/bin/gennttab > ntcontab.c ;\
/usr/bin/gcc -c ntcontab.c ;\
rm -f /11gdb/app/db11gee/product/11.1.0/db_1/lib/ntcontab.o ;\
mv ntcontab.o /11gdb/app/db11gee/product/11.1.0/db_1/lib/ ;\
/usr/bin/ar rv /11gdb/app/db11gee/product/11.1.0/db_1/lib/libn11.a /11gdb/app/db11gee/product/11.1.0/db_1/lib/ntcontab.o ; fi)
In file included from /usr/include/sys/types.h:31,
from ntcontab.c:7:
/usr/include/bits/types.h:31:20: error: stddef.h: No such file or directory
mv: cannot stat `ntcontab.o': No such file or directory
/usr/bin/ar: /11gdb/app/db11gee/product/11.1.0/db_1/lib/ntcontab.o: No such file or directory
make: *** [ntcontab.o] Error 1
/usr/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/11gdb/app/db11gee/product/11.1.0/db_1/rm -f ntcontab.*
(if [ "compile" = "compile" ] ; then \
/11gdb/app/db11gee/product/11.1.0/db_1/bin/gennttab > ntcontab.c ;\
/usr/bin/gcc -c ntcontab.c ;\
rm -f /11gdb/app/db11gee/product/11.1.0/db_1/lib/ntcontab.o ;\
mv ntcontab.o /11gdb/app/db11gee/product/11.1.0/db_1/lib/ ;\
/usr/bin/ar rv /11gdb/app/db11gee/product/11.1.0/db_1/lib/libn11.a /11gdb/app/db11gee/product/11.1.0/db_1/lib/ntcontab.o ; fi)
In file included from /usr/include/sys/types.h:31,
from ntcontab.c:7:
/usr/include/bits/types.h:31:20: error: stddef.h: No such file or directory
mv: cannot stat `ntcontab.o': No such file or directory
/usr/bin/ar: /11gdb/app/db11gee/product/11.1.0/db_1/lib/ntcontab.o: No such file or directory
make: *** [ntcontab.o] Error 1 -
Problem during installation(error in invoking target 'ntcontab.o' of make f
Hi,
Operating System:Enterprise Linux Release 5 Update 2 for x86 (32 Bit)
Database:Oracle Database 10g Release 2 (10.2.0.1.0) for Linux x86
When I am trying to installt database on the VMware virtaul machine i am getting the following error durig the linking phase of installation(at 62%)
error in invoking target 'ntcontab.o' of make file.
I have googled for this error,but i didn't find any solution which fits my requirement.
I am hoping a expert advice from this forum for my problem.
Thank You all..Please post your Installation problems on under the Installation Topic => Database Installation
Maybe you are looking for
-
Hi, In my example I want to get all the rows of the table. The table has 20 rows. The visibleRowCount is set to 7 and firstVisibleRow is set to 3. I have created the table as var oTable = new sap.ui.table.Table({ id: "oTable
-
Touch screen on Iphone slowly, over a few days stopped responding. Went to Genius Bar and was given a new 3GS because they didn't know how to fix the issue. Cool. Went home synced with Macbook Pro (new-12/2010), two days later same issue. This time w
-
How do I tell which hard drive an application is launching from?
Hello. I am first time user of the support communities here. I have searched the forums prior to posting, but haven't been able to find an answer. I have a 2011 model Mac Mini (purchased 12/2011) running OSX Lion. A couple weeks ago, I started get
-
HT201210 What to do when error message "Ipad server can not be contacted"
Trying to update ipad with current ios4 software and itunes is displaying error message of itunes server can not be contacted. How do I get around this??
-
Adobe Reader 8 with older Celeron processor
I have a 5 year old laptop with Celeron 1.1GHz & 128 KB cache. Adobe 8 requirements specify Pentium III all of which have 256 KB cache. Some Pentium IIIs are slower - 433 MHz than my Celeron. Should I try installing Adobe Reader 8 or stick with Adobe