Error in IOS transfer using Xmodem

When I transfer IOS from the desktop to a 3750 X switcch via the console at 115200 speed, the number of retries keeps on increasing and the md5 value dos not match the real md5 vlaue. Please tell me how can I mitigate this error and the root cause for the same.

3750X?
Why are you wasting your time with Xmodem? How long does it take to transfer a BIN file to the appliance vie Xmodem? 45 minutes?
A faster alternative is to boot the IOS via the USB stick.
As long as you have a USB thumb drive formatted FAT 16 and the hardware is supported by the appliance, you can boot the appliance via USB. I've done this so many times.

Similar Messages

Error in data transfer using CIF

Hi all,
I am just clueless. I am trying to transfer master data from ERP to EWM but it ain't happening. It is throwing out this error. System:    P6QCLNT800    User: RFC_USER_1 12/11/2010
Function/Q/SAPAPO/CIF_LOC_INBOUND
Text:        Internal error in IGS2, US. RFC: Connection Error.
All my settings and configs are right atleast as per SAP documentation for integrating EWM as an add on. I tried after disabling geocoders for US using the GEOCODERS report. Still I am getting, I have checked my RFC destination and tested my connection it is working fine in SM59. What should I do to proceed further?

Hi Deepak,
Following is the detail I could see:
Cl. User         Function Module                 Queue Name                Destination                       Date        Time
100 SS813794     MCEX_UPDATE_11_QRFC        MCEX11           NONE              27.02.2014 05:33:02
100 SS813794     MCEX_UPDATE_11_QRFC         MCEX11          NONE               02.03.2014 23:00:35
Status                                              TID                       Host      Tran                  Program
Transaction recorded                AC131B362DEC530F145E0001 IGTBILSA VA01                  RSM13000
Transaction recorded                AC131B362DEC5313FE630002 IGTBILSA VA01                  RSM13000
Both the queues which are seen are while I created a sales order in ECC.
If I further double click, it will take me into FM and after clicking queue name 'MCEX11' I could see:
                    LUW Information
        TransID:         AC131B362DEC530F145E0001
        LUW-Cnt:         00000001
Thanks,
AP.

Printing dunning notices using SMARTFORMS,error during parameter transfer

Hi Friends,
                I face a error message "Include text ZGA_DUN_HDR does not exist (object TEXT, ID ST)" when i run the dunning run.
                I had searched every node for text ZGA_DUN_HDR in the smartform,I didnt find the text in it.
However when I execute the smart form for print preview an error message "Printing dunning notices using SMARTFORMS,error during parameter transfer".This error i believe is due to wrong parameter passing in the fm 'GET_SF_DUNN_DATA'.It raises an error no_parameters_found.All parameters are passed correctly.
                Can you guys help me out.
Edited by: RAJIV KAUSHAL on Nov 14, 2008 6:03 PM

you can create this text ZGA_DUN_HDR in SO10 tcode and try ...

Hi, I have a Catalyst 6500 with X6K-SUP2-2ge, the IOS and bootlader image been wiped out, it starts in ROMmon SP mod end can't switch to RP to start download the IOS using Xmodem, though it shouldn't work in ROMmon SP omde but the xmodem is not gving the

Hi, I have a Catalyst 6500 with X6K-SUP2-2ge, the IOS and bootlader image been wiped out, it starts in ROMmon SP modw and I can't switch to RP to start download the IOS using Xmodem, though Xmodem shouldn't work in ROMmon SP mode but the it's not gving the
not executable message, the slot0: and disk0: are not accessable can't see the files inside, when I try the dir slot0: or dir disk0: it says it can't be opened and when I try to boot from them there's noting as well, what can I do to load an IOS image to the booflash: or slot0: ,each time I load the image using Xmodem at the end it gives me *** System received a Software forced crash ***
signal=0x17, code=0x5, context=0x0
When I run the command:
rommom1> boot bootflash:
boot: cannot determine first file name on deice "bootflash:"
rommon2> boot slot0:
boot: cannot open "slot0:"
boot: cannot dtermine first file name on device "slot0:"
BTW System Bootstrap, version 7.1
I''m looking to format the PCMCIA using a PC and format it to FAT16 and copy the boot image into it and then try to load from the PCMCIA afterward if it works I'll format it using the Supervisor engine 2.
Any one have another new idea I can use, thanks in advance

This is a potentially complex issue.
Is this SUP configured to run as IOS native or CatOS Hybrid?
While in ROMMON can you do the 'dev' command and see whad drives are recognized. Then 'dir' the drives that the SUP recognizes.
Can you provide the screen captures as it boots?
You would be bette served by hacing a TAC case.

Error importing Incoming Payments using the Data Transfer Workbench

Every time I try to import Incoming Payments using the Data Transfer Workbench I get an error that the Update Failed - Can not find this object in B1Application-defined or object-defined error65171. I'm using the 3 templates for Payments, Payments_Checks and Payments_Invoices. I've filled them out as I've seen in other postings in this forum. Based on the error message, I really can't tell what I'm doing wrong. Could someone please take a look at my files and let me know what might be causing the error?
I'm using SBO 2007A PL41. Here's what I have entered in my templates for my test file.
Payments file
RecordKey 1
DocEntry (blank)
CardCode 1033985
DocDate 20081215
DocTypte rCustomer
TaxDate 20081215
Payments_Checks file
RecordKey 1
LineNum 0
AccounttNum 0
CheckAccount _SYS00000002152
BankCode CC
Branch 12345
CheckNumber 1
CheckSum 78.7
CountryCode CA
DueDate 20081215
Trnsfrable tNo
Payments_Invoices file
RecordKey 1
LineNum 0
DocEntry 31791
InvoiceType 13
SumApplied 78.7
Thank you.

Hi Suda,
As far as I can tell from the threads you forwarded (and other searches I've done on here), my files are correct. I tried filling out the templates exactly as explained in the first link (see my data below) but it still isn't working. It just gives me the same generic error.
Payments
Record Key....CardCode.....DocDate
1...................1033985.......20081217
Payments_Checks
RecordKey....CheckAccount........CheckNumber....CheckSum
1.................._SYS00000002152..1..................... 78.7
Payments_Invoices
RecordKey....DocEntry.....SumApplied
1..................31791..........78.7
Is it correct that the Payments file should not contain anything in the DocEntry column? (I know that the DocEntry in my Invoices file is the DocEntry of the Invoice). I have a feeling that I'm making a stupid mistake somewhere but I just can't figure it out. Any ideas?
I really appreciate your help with this.
Thanks,
Charlotte

HT4623 on upgrading iPhone 4 to ios 6 using itunes it returned an unknown error then froze completely. It has the iTunes and USB connector on the screen. Reset is not working, I get the same frozen screen.

On upgrading iPhone 4 to ios 6 using iTunes, it returned an unknown error then froze completely with the iTunes icon and USB connector on the screen. Reset didn't work. iTunes doesn't recognize the devise anymore.

if your computer is not recognizing it, try using a different USB port or different usb cable. if that doesnt work you will need to uninstall and reinstall itunes.

ISSUE:regarding production version tab of MRP4 of data transfer using BD10

Hi all,
This is regarding production version tab of MRP4 of data transfer using ALE idoc (BD10).
When i transfer the data using BD10 the production version is received at receiving end through segment
but not created in MRP4 view tab.An error is coming as-
"You wanted to maintain the master record of the material AB_06.04.09(2). However, it is already being processed by the user EBGABAP and is therefore locked."
I logged in as-EBGABAP
Please help me resolve the issue.
Thanks
Edited by: sanu debu on May 6, 2009 11:08 AM
Edited by: sanu debu on May 6, 2009 11:09 AM
Edited by: sanu debu on May 6, 2009 11:11 AM

>
sanu debu wrote:
> Hi,
> I have to upload production version tab data of MRP4 view(MM01).Please suggest a function moduleor bapi for the same.
>
> Thanks.
>
> Edited by: sanu debu on May 6, 2009 3:24 PM
BAPI_MATERIAL_SAVEDATA can be used, populate the respective fields in input parameter PLANTDATA

Unable To Build iOS App Using Native Extension

I’m trying to create a native extension for iOS and use that extension as part of an IPA app for iOS I create from a SWF file using the ADT tool (i.e. the normal use-case for iOS). Note: I have already successfully created the native extension and APK app for Android and now I am trying to build the iOS side.
I have been primarily using the information found at the following websites:
http://www.adobe.com/devnet/air/articles/building-ane-ios-android-pt3.html
http://www.adobe.com/devnet/air/articles/building-ane-ios-android-pt5.html
http://help.adobe.com/en_US/air/build/WS901d38e593cd1bac35eb7b4e12cddc5fbbb-8000.html
I have also searched the Adobe forums for the answer to my question without success.
The error I receive is:
ld: warning: ignoring file /var/folders/c3/mpg4frwn2j1f8scw4jctbmv9hfkswj/T/bd3fbd4a-cf56-4fd6-a06d-d69ea92dc620/lib com.mycompany.MyExtension.a, file was built for archive which is not the architecture being linked (armv7): /var/folders/c3/mpg4frwn2j1f8scw4jctbmv9hfkswj/T/bd3fbd4a-cf56-4fd6-a06d-d69ea92dc620/lib com.mycompany.MyExtension.a
Undefined symbols for architecture armv7:
"_MyExtensionInitializer", referenced from:
      _g_com_adobe_air_fre_fmap in aotInfo.o
"_MyExtensionFinalizer", referenced from:
      _g_com_adobe_air_fre_fmap in aotInfo.o
ld: symbol(s) not found for architecture armv7
Compilation failed while executing : ld64
I receive the above error when I execute the following command:
adt -package -target ipa-ad-hoc -storetype pkcs12 -keystore certificate.pfx -provisioning-profile provisioning_profile.mobileprovision MyApp.ipa MyApp.xml MyApp.swf -extdir packaged-extensions
where the folder “packaged-extensions” contains the ANE file I created using this command:
adt -package -target ane packaged-extensions/MyExtension.ane MyExtension.xml -swc MyExtension.swc -platform Android-ARM -platformoptions platformAndroidARM.xml -C dependencies . -C platform/Android . -platform iPhone-ARM -platformoptions platformiOSARM.xml -C platform/IOS . -platform default -C platform/default library.swf
where the content of the files are as follows:
MyApp.xml:
<application xmlns="http://ns.adobe.com/air/application/4.0">
    <id>MyApp</id>
    <versionNumber>0.0.1</versionNumber>
    <filename>MyApp</filename>
    <initialWindow>
        <content>MyApp.swf</content>
        <visible>true</visible>
        <width>600</width>
        <height>600</height>
    </initialWindow>
    <supportedProfiles>mobileDevice</supportedProfiles>
        <extensions>
                <extensionID>com.mycompany.MyExtension</extensionID>
        </extensions>
</application>
MyExtension.xml:
<extension xmlns="http://ns.adobe.com/air/extension/4.0">
        <id>com.mycompany.MyExtension</id>
        <versionNumber>0.0.1</versionNumber>
        <platforms>
                <platform name="Android-ARM">
                        <applicationDeployment>
                                <nativeLibrary>MyExtension.jar</nativeLibrary>
                                <initializer>com.mycompany.MyExtension</initializer>
                        </applicationDeployment>
                </platform>
                <platform name="iPhone-ARM">
                        <applicationDeployment>
                                <nativeLibrary>libMyExtensionIOSLibrary.a</nativeLibrary>
                                <initializer>MyExtensionInitializer</initializer>
                                <finalizer>MyExtensionFinalizer</finalizer>
                        </applicationDeployment>
                </platform>
                <platform name="default">
                        <applicationDeployment/>
                </platform>
        </platforms>
</extension>
platformiOSARM.xml:
<platform xmlns="http://ns.adobe.com/air/extension/4.0">
<linkerOptions>
    <option>-ios_version_min 5.1</option>
    <option>-liconv</option>
</linkerOptions>
</platform>
MyExtensionIOSLibrary.m (yes, I know it doesn't do anything - it's simple on purpose to help isolate the error):
#import "FlashRuntimeExtensions.h"
void MyContextInitializer(void* extData, const uint8_t *ctxType, FREContext ctx, uint32_t *numFunctionsToTest, const FRENamedFunction **functionsToSet) {
return;
void MyExtensionInitializer(void **extDataToSet, FREContextInitializer* ctxInitializerToSet, FREContextFinalizer* ctxFinalizerToSet) {
    *extDataToSet = NULL;
    *ctxInitializerToSet = &MyContextInitializer;
void MyExtensionFinalizer(void *extData)
    return;
I am using XCode to build MyExtensionIOSLibrary.m into a library file with a .a filename extension. My relevant build settings are:
iOS Deployment Target: iOS 5.1
Architectures: armv7
Build Active Architectures Only: No
Product Scheme: Release
Compile Sources As: Objective-C
Any ideas? Please help.

Thanks for the reply.
yes.I've created a static library with 3rd party frameworks and pulled the .a from product folder(Debug-iphoneos).
and the framework didn't work(armv7 not supported error occurs ..don't know why) with it's original folder structure .
so I followed below link to change folders inside the 3rd party framework and figured out but now the application crashes on startup without giving an error message. .
スタッフ日記 - 【ANE作成】外部フレームワークを含むANE作成時の注意点(iOS) | 株式会社マリエッタ

Error when transporting transfer rules

Hi, i got an error when i transport transfer rules. i got the following errors in various transfer rules:
Mapping between data source 0CUSTOMER_ATTR and source system EMP300 is inconsistent
AND
Reference to transfer structure 0CUSTOMER_ATTR_BB not available. No activation possible.
I tried to activate the data sources and transport them several times, but i got the same errors. Checking manually i can see the data sources active in my source system, in development and productive instances.
Thanks in advance.
Diego Lombardini

Hello Diego
Do you choose the correct Transfer Structure in DEV?
I mean the one that is assigned to EMP300.
Are you saying that your PROD have the following:
0customer_text_BA
And that your DEV only have the following:
0customer_text_BB
If the answer to the above questions is YES;
Find out if some one has assigned ATTR to 0CUSTOMER directly in PROD or somebody has changed 0CUSTOMER_ATTR in DEV without transporting it to PROD.
I think that one way to resolve this problem is to use the option "overwrite origanls" in STMS.
Use it with caution and do not mass transport when you use this option.
Good luck
/FZA
Message was edited by: Fariborz Zangoui
Message was edited by: Fariborz Zangoui

Error during asset transfer: No depr areas for receiving revenue

Hi....
when I am posting an asset transfer transaction [Inter company transfer with transfer method 2: Net method] and simulating, I am getting an error message stating "No Depr areas for receiving the revenue". Kindly help me solve this error.
Thanks
Satya

Hi....
I am posting the transfer from with revenue details as NBV from depr area 01, and using the transfer variant as 2 [Net Method]. Still it gives the same error.
I then try posting a manual revenue and again it shows the same error.
Finally, I use No revenue option, and it accepts. do not why this is happening?
Kindly help.
Thanks

Error in ios 8.1

Today I used my iphone 5s ios 8.1 and accidentally found a way to get around touch id and password. Who can I write an error in Ios 8.1?

HI All
Please reply.

Error message on iPad using safari and iMessage/ FaceTime.

I'm having trouble with my iPad (3). Just recently I keep getting the same error message when searching using safari, it says cannot open page as too many redirects occurred. I've tried closing all tabs, clearing the history and clearing cookies and data but nothing is working. I can still use google and use my Facebook and Twitter apps. Also since clearing data, I have been logged out of iMessage and FaceTime, when I try and log back in again it says that an error occurred during activation. What's wrong with my iPad?! I updated my iOS software a few weeks ago so I assumed that couldn't be the problem. Please help!

You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
Try again to see if the problem persists.

Error in Data Transfer Process (DTP) Urgent!

Hi,
ive encountered an error in uploading data from R3 using DTP in a specific cube and it says "Exceptions in Subset: Load and Generation" and "Dump: ABAP/4 processor: MESSAGE_TYPE_X", how can i fix this problem? is there any problem with the upgrade process of our system or in KERNEL? and what is KERNEL? Please help me guys.....
Thanks,
nips

Please do not post the same question twice.
Error in Data Transfer Process (DTP) Urgent!

My iPod touch 5th gen won't turn on after updating to iOS 8 using the computer,help!?

On my computer (using windows) I tried to update my iPod touch 5th gen to iOS 8 using iTunes, using this website http://www.gottabemobile.com/2014/09/17/the-secret-to-skipping-long-ios-8-downlo ads-and-problems/ as a guide.
It kept coming up with this error http://support.apple.com/en-us/HT201442 after the update.
Now my iPod won't turn on and it shows the charger with the lightening with an arrow above it pointing to the iTunes logo.
So i plugged it into iTunes but i don't know what i'm supposed to do, any help?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Air iOS - To use TestFlight Beta Testing, build 1.0.0 must contain the correct beta entitlement.

Hi,
I published my iOS app and uploaded it to iTunes Connect to run an external beta test through Apple TestFlight but I got this error:
To use TestFlight Beta Testing, build 1.0.0 must contain the correct beta entitlement.
I created my certificate 3 days ago and it contains the beta entitlement.
I published the iOS app with the latest Flash CC 2014 version on a Mac with Air 15.
How to fix that error?
Thanks

I'm using flasProfesionnalcc 2014, using Air SDK 16... I have the same problem.
>In summary... I am using Air SDK 16.0 and added the following to my app xml file:
<Entitlements>
<![CDATA[ <key>get-task-allow</key>
<false/>
<key>beta-reports-active</key>
<true/> ]]>
</Entitlements>
But when I try to insert the <Entilements> code into de xml file I receive a error when a try to complile:
Error application.Entilemens is a unexpected element/atribute
How to fix that error?
Thanks

Error in IOS transfer using Xmodem

Similar Messages

Maybe you are looking for