Error in iPhoto Category

Hi, all.
Is it just me, or does anyone else see a problem loading the iPhoto category or any other forum? I refreshed the page today and it was twice as wide as it should be. I figured I needed to freshen up my browser, so I quit Firefox and tried again. This time it wasn't too wide for the screen, but I got something weird.
At the top is the normal iPhoto category page, followed by the beginning of the list of topics. Weird thing is, after 16 topics listed I have an error page:
I've tried loading several times and keep getting it like that. If I choose a subcategory or specific forum I do not get this error.
Anyone else see this?
Regards.

You're Welcome Smtr!
But I don't know if my alert had any bearing on the correction.
Your & Ileen's topics, in this Forum, may have also done the trick!
And Thanks for the !
ali b

Similar Messages

I used migration to send photos form my Mac Book to my I Mac now i get an error message "iPhoto can not be opened because of a problem" Check with the developer to make sure iPhoto works with this version of Max OSX. You may need to install any availabl

I used migration to send photos form my Mac Book to my I Mac now i get an error message "iPhoto can not be opened because of a problem" Check with the developer to make sure iPhoto works with this version of Max OSX. You may need to install any available updates or reinstall IPhoto.
I tried installing Iphoto it said it was downloaded successfully. I still get the error messafe, and can not open any photos of program, any suggestions?

What version of iPhoto do you have on the Macbook and on the iMac? What systems are you running on the Macbook and on the iMac?
Does the message only refer to "a problem" or does it specify what it is?
Happy Holidays

Error Acct. assgt. category 3 not defined (please check your input)

Hello all I'm trying to create BAPI_PO_CREATE and getting error " Acct. assgt. category 3 not defined (please check your input) ".
What is this Account assignment category concept in SAP ? What input value should i change ?

Hi
In addition to Srinivas, account assigment 3 is missing in OME9 in your case
So before running your Bapi make the necessary settings
Thanks
vishnu

To Hosts: System Error in iPhoto '08 forum

In the iPhoto '08 category, the "Installing & Using iPhoto '08" forum is generating a system error message. The other iPhoto forums do not seem to be affected. http://discussions.apple.com/forum.jspa?forumID=1192
Thanks.

Glad it wasn't something on my end that was causing the error. I can get to individual topics via the email response link but not thru the other avenues.
OT

Error while deleting category and hierarchy

Hi All,
I am not able to delete the categories and hierarchy. It is throwing a message products are still assigned to categories. But when I go to maintain products and click on start it is not showing any product. I created another category also. It is showing another error certain set types can be assigned to base categories. I went to se38 and given the program COM_PRODUCT_DELETE_SINGLE also and deleted every product. Still I am not able to delete category.
Again when I delete some set types from the category it is showing another message that products of subcategory already exists. Set type cannot be deleted.
Can anybody suggest me what should I do?
Thanx
Sarvana

Hi Saravana,
If you have tried COM_PRODUCT_DELETE_SINGLE, then I'm guessing that you must be aware of making an entry in the table COMC_PR_TOOL_REG wherein you register the system program that you want to execute for ex: Delete Product, Category etc.
Ensure that there are no entries in the table COMM_PRODUCT. You can also try program COM_PRODUCT_DELETE_ALL to delete all products in the system.
In order to delete Product hierarchy you could use program COM_HIERARCHY_DELETE_ALL or COM_HIERARCHY_DELETE_SINGLE which would delete Hierarchies with All Category Data.
Also, in order to delete Category-Set type relationships, delete entries from the database table COMM_CATFRGR.
Hope this helps.
Regards,
Pavithra
**PS : Please reward points if this helps

I get error message: iPhoto can not run due to an incompatible version of ProKit on this system. What should I do?

Hi, I have an iPhoto that can't run and shows this message. What should I do? I had Aperture before, but I deleted it. Now iPhoto shows some error. Please someone help me,
Thanks,
K3V1Nbot

K3V1Nbot wrote:
Hi, I have an iPhoto that can't run and shows this message. What should I do? I had Aperture before, but I deleted it. Now iPhoto shows some error. Please someone help me,
Thanks,
K3V1Nbot
Update ProKit if there is an update or more recent release.
Pete

Error in Product Category Replication

Hi Gurus,
We are trying to replicate the product category from R/3 4.7C system to SRM5.0 system.
All the relevant table settings have been done in both the systems and we have successfully loaded objects: DNL_CUST_BASIS3 and DNL_CUST_PROD0 from R/3 to SRM system.
Now, the problem is with loading of the object DNL_CUST_PROD1. When we start its intial upload, the outbound queue in SRM system shows that the status of the queue is "SYSFAIL". The details of the error message show : "Filter criteria invalid. See note 0419752". We have set filter for T023 table for MAKTL field, so that only one material group is replicated from R/3 client.
We have checked the relevant release versions mentioned in the note, but our systems are on a higher version release.
Could anyone let us know which correction patch to implement in this case?
Thanks n Regards,
Ancy

OK. GO to R3AR2 AND CLICK THE PENCIL And click new entries
now you get requester name
adapter object =DNL_CUST_PROD1
table name =T023
field name = MATKL
LOW = you are material grup which you want to only rplicate
option = Equality (=low)
high = empty
go to r3ar4 and give your request name and supply dest and source that all
check comm_category table.

Error uploading iphoto book

I am using iphoto 6.0.4. I keep getting an error while trying to upload pictures. It assembles the book okay then always gets stuck at "transferring 119k of 15.1 MB" for a while then an error message pops up saying there was an error with one of the files, try again? If I hit 'try again', it reads 15.1MB of 15.1MB but doesn't ever do anything. I would really like to order a few books but can't seem to get past the ordering page. Any help would be appreciated. Thanks!

Hi again Tracy,
Before going any further I would create a new user account on your computer and try to send a book from over there. This is help eliminate the possibility that there is something wrong with just your user account.
For instructions on creating a new account go here --> http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh168.html
If that fails then continue:
I wonder if you have ever been able to order books in the past. It sounds like the upload speed on your internet connection might be too slow for the iphoto print server.
I'm not familiar with "Direcway". Is this cable, dsl, fiberoptic, or satellite?
If its Satellite we can probably stop right here. Satellite internet is NOTORIOUS for having poor upload speeds and intermittent connection quality.
If it is satellite read my following comments and give them a shot just to cover your bases.
If you are running your computer through a router or hub like an Airport Extreme, Linksys, etc. I would recommend plugging your computer directly into the internet (modem or whatever you have in your setup). By bypassing this extra devices you eliminate possible interference from those device and devote as much speed to your computer as possible.
Often ISPs will save cost by giving us high download speeds so we can us web sites with relative ease. But the upload speed (or ability to send data out) is fairly slow.
You have to have a good solid connection (not a lot of packet loss) that is running at a minimum speed of 152 kbps or twice that of a standard telephone modem running 56k.
To test your connection you can go to http://www.dslreports.com/stest this will check your upload and download speed.
Essentially if your upload speed is very low or it looses a lot of data in transit (packet loss) there isn't much you can do on the computer end. Its an issue with your ISP.
If all else fails you may want to use a friends computer to publish your book if they have access to a different connection type. You can also look to see if there is an Apple Authorized Service Provider or Reseller (not to mention an Apple Store, which would be perfect) in your area. http://www.apple.com/buy/
You can copy your iphoto library onto a CD/DVD and take it in. You can then publish from their computer.
I hope that helps.
Please check back if you need further assistance.
Cheers!

Facing error updating iPhoto and downloading xCode from Apple store

hi there,
im trying to update my iPhoto, it was downloading perfectly well for more than an hour, then when i came back to check on its' progress it has stopped downloading and the message "An error has occured" was next to it, tried to update it several times but no use, any idea why it happened? and how can i solve it?
on the other hand i'm trying to download xCode application from Apple store, it has been more than couple of hours and it's still "Waiting..." to download, it keeps freezing on "waiting", this is my third time deleting it and redownloading it again. any solutions?
will highly appreciate your help...

Have you tried quitting the App Store program and restarting it? Have you tried restarting your computer?

Error in iPhoto 6: "no pages from the document were selected to be printed"

Getting this error: "no pages from the document were selected to be printed" after -- you guessed it -- selecting a photo and trying to print (from iPhoto 6).
Everything was working fine (I had successfully printed several photos) and then I tried to get the printer to communicate through a Bluetooth dongle plugged into the printer, and now the printing won't work, although I'm plugged into the printer via USB. Printer is an Epson PictureMate PM200.
I've tried deleting the iPhoto preferences file, but that didn't seem to help.
Thanks!

Okay, so I ran the disk utility, repairing disk permission as well as deleting the iPhoto permissions file, and I have successfully printed - yippee =).
Thanks, Old Toad.

Error popups Item category to be assigned

Hello Sir/madam
"There is no item category assigned to account to the specified company code" , if a pop up , message comes like this , what the way to sortout, such error, have assigned in charted occount, in F-02 after updating, amount, once try to save, this type of error is given,
Been to spro and did document spliting,-activate document splitting, but, again error is coming, and the trasaction is not accepted.
thanking you,
warm regards

Hi
Please give in document splitting accounting which you are using in for posting in f-02 and give category save. Then go to f-02 please check.
Regards
Ramesh

Error in IPhoto

when i tag a face in a photo in iphoto and then upload that very same picture to facebook , using the iphoto uploader ... it shows in facebook that some other person in my friends list has been tagged....this is leading to a lot of problems...please help!

Post in the iPhoto forum area - http://discussions.apple.com/category.jspa?categoryID=143

ERROR : No item category exists (Table T184L LB VERP )

There is a error log "No item category exists (Table T184L LB VERP ) " when i try to create outbound delivery to subcontractor vendor via TCode ME2O.
I already add item category LB VERP via TCode 0184, but it still error.
Could anyone help me please
Thanks & Best Regards,
Saiful arif

Hi Arif,
Did you define delivery item category for LB VERP record in transaction 0184?
Regards,
Csaba
Edited by: Csaba Szommer on Oct 28, 2008 10:32 AM

Error with Valuation Category in Accounting 1 Tab of Material Master

Dear All,
I have created plant and also activated the "Split Activation" for that plant through SPRO-MM-Valuation & A/c Assignment ---Split valuation.
But when i Extend the material form another plant the "Valuation Category" field in Accounting 1 Tab of Material Master becomes INACTIVE (i.e. it becomes gray). Where as for the plant (from which i am copying the material) the same field is ACTIVE.
Please suggest me what might be the error.
I have checked the setting for both the plants i.e. in which it is working and the other where it is not working. The settings are same.
Please help.
Thanks in advance.

Hi Shailendra
If this is for a single material.
I hope u r using MM01 only by giving reference of existing mat., in this case, at this stage only you have to maintain Valuation Category.
Once the material is created, the field will become gray.
This is what I know. If still, there is any way to make this field active, if u come to know, please let me know too.

Error in Item Category Determination

Hai,
When I am trying to define the Item category determination for the quotation type I get the following error message
"only quotation items can be assigned to package transaction types"
Can you please let me know the reason for the error
Thanks,
Vijay

I was able to resolve it.

Error in iPhoto Category

Similar Messages

Maybe you are looking for