Error in ITS display of reports after Unicode changes

Hi
We recently made our systems unicode compatible.
After that upgradation, there are problems in output display of reports.
All the data gets displayed in a single line.
Also few other errors come up in JA language related to alignment.
Report seems to be ok in R/3. We have used standard template for reporting WEBREPORT_REPORTING.
Can someone provide inputs..

Hi,
please try that with a browser supported for the service you are using.
I assume that you are using the service webgui and the browsers supprted are
the Mozilla based Firefox and the Internet Explorer.
Does it work there?
The parameter of interest regarding Unicode stuff for the ITS is the login codepage
and it should be converted automatically during the steps described in the Howto.
regards
Tobias

Similar Messages

Error message when displaying a report in a windows form

Hi,
use Cr 2008.SP3 Fixpack 3.5,
Visual Studio 2008 prof. editon version 9.0.30729.1 SP,
:NET Framework 3.5 sp1
vb.net 2008
when displaying a report in a Windows form sometimes the following error message appears
System.NullReferenceException: Object reference not set to an instance of an object
   bei CrystalDecisions.Windows.Forms.PageControl.OnMouseMove(MouseEventArgs e)
   bei System.Windows.Forms.Control.WmMouseMove(Message& m)
   bei System.Windows.Forms.Control.WndProc(Message& m)
   bei System.Windows.Forms.ScrollableControl.WndProc(Message& m)
   bei System.Windows.Forms.ContainerControl.WndProc(Message& m)
   bei System.Windows.Forms.UserControl.WndProc(Message& m)
   bei CrystalDecisions.Windows.Forms.PageControl.WndProc(Message& m)
   bei System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   bei System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   bei System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
The rest of the error message is in german:
************** JIT-Debuggen **************
Um das JIT-Debuggen (Just-In-Time) zu aktivieren, muss in der
Konfigurationsdatei der Anwendung oder des Computers
(machine.config) der jitDebugging-Wert im Abschnitt system.windows.forms festgelegt werden.
Die Anwendung muss mit aktiviertem Debuggen kompiliert werden.
Zum Beispiel:
<configuration>
    <system.windows.forms jitDebugging="true" />
</configuration>
Wenn das JIT-Debuggen aktiviert ist, werden alle nicht behandelten
Ausnahmen an den JIT-Debugger gesendet, der auf dem
Computer registriert ist, und nicht in diesem Dialogfeld behandelt.
Thank you
Otto

Can you define "sometimes" a bit more?
Is it after a number of runs of a report?
Is it on a particular report?
Is it after you do certain operations on the report (paging, zooming, dill down, print, etc., etc.)?
Can you duplicate the issue if you isolate the report to a new test app?
Did you happen to notice if the issue existed prior to FP 3.5?
Is this on your dev computer or a client computer?
OS?
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Syntax Error while running step 34 (35) after unicode conversion

Hello,
We are converting our test system to Unicode to find out how to do it
in our production system. We are at step 34/35 (Starting RFC job's) in
the database installation so we are almost done but we have encounted a
problem that we can't find a solution to. The error log in Sapinst give this
information:
ERROR      2008-11-09 11:19:19 [iaxxrfcimp.cpp:1103]           CAbRfcImpl::performFunctionCall FRF-00025 Unable to call function.
Error message: ?`>?/?????????>??????/_???&<?(????????????????????????????????????????????????? .
At the same time we can read the following text in dev_w1 (and dev_w0 and so on):
A *** ERROR => Syntax error in program SAPLBTCH                                 [abgen.c      1388]
A *** ERROR => > Include LBTCHF39                                 line 173 [abgen.c      1390]
A *** ERROR => > Statement "âu2018âu2018âu2018âu2018âu2018IF" is not defined. Check your spelling. spelling. [abgen.c      1393]
The error don't always look the same, here is another example:
A *** ERROR => Syntax error in program SAPLSALC                                 [abgen.c      1388]
A *** ERROR => > Include LSALCU54                                 line 55 [abgen.c      1390]
A *** ERROR => > No component exists with the name "MTSYSIDâu2018MTMCNAMEâu2018MTNUMRANGEâu2018MTUIDâu2018". "MTSYSID [abgen.c      1393]
A *** ERROR => > âu2018MTMCNAMEâu2018MTNUMRANGEâu2018MTUIDâu2018". [abgen.c 1395]
The common thing is Syntax error. If we try to log in to the system using SAP Gui we get this message: "Syntax error in program SAPMS380".
In the file dev_disp we can read a lot of these:
Tue Nov 11 14:06:32 2008
*** WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
But we should have enough WP since noone has loggen on to the system.
Facts:
Tue Nov 11 14:06:07 2008
kernel runs with dp version 138000(ext=102000) (@(#) DPLIB-INT-VERSION-138000-UC)
length of sys_adm_ext is 524 bytes
sysno      60
sid        S01
systemid   274 (HP (IA-64) with HP-UX)
relno      6400
patchlevel 0
patchno    258
intno      20020600
make:      single threaded, Unicode, 64 bit
pid        20538
HPUX on Intel IA64 with Oracle 10.0.2.0.2
SAP ERP Central Component 5.0
SAP_ABA     640     0021     SAPKA64021
SAP_BASIS640     0021     SAPKB64021
Please let me know that there is some small setting that I can change to regenerate the programs or something like that...
Br Linus Hellsing

Hello Ralph
Here they are:
TOC files
SAPAPPL0.TOC:
vn: R6.40/V1.4
id: 084ac0df0000003d
cp: 4102
data_with_checksum
tab: [HEADER]
fil: SAPAPPL0.001 1024
SAPAPPL1.TOC:
vn: R6.40/V1.4
id: 084ac0df0000003d
cp: 4102
data_with_checksum
tab: [HEADER]
fil: SAPAPPL1.001 1024
EXPORT log:
SAPAPPL0.log
/sapmnt/S01/exe/R3load: START OF LOG: 20081029110702
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4
Compiled Aug 16 2008 18:01:48
/sapmnt/S01/exe/R3load -ctf E /mnt/s01_exp_uni/DATA/SAPAPPL0.STR /mnt/s01_exp_uni/DB/DDLORA.TPL /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL0.TSK ORA -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL0.log
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081029110703
/sapmnt/S01/exe/R3load: START OF LOG: 20081029110709
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4
Compiled Aug 16 2008 18:01:48
/sapmnt/S01/exe/R3load -datacodepage 4102 -e /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL0.cmd -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL0.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(EXP) INFO: check NameTab widths: Ok.
(DB) INFO: Export without hintfile
(RSCP) INFO: UMGCOMCHAR read check, OK.
(RSCP) INFO: init SUMG interface; package name: "SAPAPPL0".
(RSCP) INFO: "/mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL0001.xml" created.
(RSCP) INFO: environemnt variable "I18N_POOL_WIDTH" is not set. Checks are active.
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(RSCP) INFO: UMGSETTINGS nametab creation: ok.
(RSCP) INFO: Global fallback code page = 9491
(RSCP) INFO: Common character set is not 7-bit-ASCII
(RSCP) INFO: Collision resolution method is 'fine'
(RSCP) INFO: R3trans code pages = Normal
(RSCP) INFO: EXPORT TO ... code pages = Normal
(RSCP) INFO: Check for invalid language keys: activated
(RSCP) INFO: I18N_NAMETAB_NORM_ALLOW = 999999999
(RSCP) INFO: I18N_NAMETAB_NORM_LOG   = 1000000002
(RSCP) INFO: I18N_NAMETAB_ALT_ALLOW = 10000
(RSCP) INFO: I18N_NAMETAB_ALT_LOG    = 10003
(RSCP) INFO: I18N_NAMETAB_OLD_ALLOW = 0
(RSCP) INFO: I18N_NAMETAB_OLD_LOG    = 500
(GSI) INFO: dbname   = "S0120081016081020                                                                                "
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "scar                                                            "
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "scar"
(GSI) INFO: release = "B.11.23"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "ia64"
(GSI) INFO: instno   = "1220008646"
(EXP) TABLE: "/BDL/LOCK"
(EXP) TABLE: "/BEV1/BO_CONT"
(EXP) TABLE: "/BEV1/BO_ENQUEUE"
(EXP) TABLE: "/BEV1/CLCONT1"
(EXP) TABLE: "/BEV1/CLDEB"
and so on
(EXP) TABLE: "ADR9S2"
(CNV) WARNING: code page conversion problem
               Number of substitutions: 4
      (row 30 of current buffer, table ADRC)
CLIENT 30 30 30                                        |000             |
ADDRNUMBER 30 30 30 30 30 31 34 38 36 39                   |0000014869      |
DATE_FROM 30 30 30 31 30 31 30 31                         |00010101        |
NATION 20                                              |                |
(CNV) WARNING: code page conversion problem
               Number of substitutions: 2
      (row 41 of current buffer, table ADRC)
CLIENT 30 30 30                                        |000             |
ADDRNUMBER 30 30 30 30 30 32 31 39 38 32                   |0000021982      |
DATE_FROM 30 30 30 31 30 31 30 31                         |00010101        |
NATION 20                                              |                |
(RSCP) INFO: 51 lines written to /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL0001.xml
(EXP) TABLE: "ADRC"
(RSCP) INFO: 3 lines written to /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL0001.xml
(EXP) TABLE: "ADRCOMC"
and then its the same with table SETHEADERT and SKAT and SNAP and STXH.
I will not include the whole file as it is 14213 lines long.
SAPAPPL1.log
/sapmnt/S01/exe/R3load: START OF LOG: 20081029110701
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4
Compiled Aug 16 2008 18:01:48
/sapmnt/S01/exe/R3load -ctf E /mnt/s01_exp_uni/DATA/SAPAPPL1.STR /mnt/s01_exp_uni/DB/DDLORA.TPL /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL1.TSK ORA -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL1.log
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081029110702
/sapmnt/S01/exe/R3load: START OF LOG: 20081029110709
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4
Compiled Aug 16 2008 18:01:48
/sapmnt/S01/exe/R3load -datacodepage 4102 -e /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL1.cmd -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL1.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(EXP) INFO: check NameTab widths: Ok.
(DB) INFO: Export without hintfile
(RSCP) INFO: UMGCOMCHAR read check, OK.
(RSCP) INFO: init SUMG interface; package name: "SAPAPPL1".
(RSCP) INFO: "/mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL1001.xml" created.
(RSCP) INFO: environemnt variable "I18N_POOL_WIDTH" is not set. Checks are active.
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(RSCP) INFO: UMGSETTINGS nametab creation: ok.
(RSCP) INFO: Global fallback code page = 9491
(RSCP) INFO: Common character set is not 7-bit-ASCII
(RSCP) INFO: Collision resolution method is 'fine'
(RSCP) INFO: R3trans code pages = Normal
(RSCP) INFO: EXPORT TO ... code pages = Normal
(RSCP) INFO: Check for invalid language keys: activated
(RSCP) INFO: I18N_NAMETAB_NORM_ALLOW = 999999999
(RSCP) INFO: I18N_NAMETAB_NORM_LOG   = 1000000002
(RSCP) INFO: I18N_NAMETAB_ALT_ALLOW = 10000
(RSCP) INFO: I18N_NAMETAB_ALT_LOG    = 10003
(RSCP) INFO: I18N_NAMETAB_OLD_ALLOW = 0
(RSCP) INFO: I18N_NAMETAB_OLD_LOG    = 500
(GSI) INFO: dbname   = "S0120081016081020                                                                                "
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "scar                                                            "
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "scar"
(GSI) INFO: release = "B.11.23"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "ia64"
(GSI) INFO: instno   = "1220008646"
(EXP) TABLE: "/BDL/ADDONKEYS"
(EXP) TABLE: "/BDL/BADHOST"
and so on until
(EXP) TABLE: "SEWADATCOL"
(EXP) TABLE: "SFHX"
(CNV) WARNING: code page conversion problem
               Number of substitutions: 1
      (row 3519 of current buffer, table SFIWP)
LANGU 4a                                              |J               |
WORDF 82 41 45 82 a8 82 ad 95 4b 97 56 82 aa 82 a0 82 |.AE.¨..K.V.ª. .|
WORDF c8 82 55 45 82 b7 81 42 20 20 20 20 20 20 20 20 |È.UE.·.B        |
WORDF 20 20 20 20 20 20 20 20                         |                |
and table STERM_TEXT. As before I will not include it all, the log file is 7775 lines long.
IMPORT log
SAPAPPL0.log
/sapmnt/S01/exe/R3load: START OF LOG: 20081106102704
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 16 2008 18:23:56
/sapmnt/S01/exe/R3load -ctf I /mnt/s01_exp_uni/DATA/SAPAPPL0.STR /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/DDLORA.TPL /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.TSK ORA -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.log
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081106102705
/sapmnt/S01/exe/R3load: START OF LOG: 20081106103529
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 16 2008 18:23:56
/sapmnt/S01/exe/R3load -dbcodepage 4102 -i /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.cmd -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.log -stop_on_error -k 54FB9C39DB
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname   = "S0120081106091135                                                                                "
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "scar                                                            "
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "scar"
(GSI) INFO: release = "B.11.23"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "ia64"
(DB) INFO: /BDL/LOCK created #20081106103642
(IMP) INFO: import of /BDL/LOCK completed (0 rows) #20081106103642
(DB) INFO: /BDL/LOCK~0 created #20081106103642
(DB) INFO: /BEV1/BO_CONT created #20081106103642
and so on until the end:
(DB) INFO: ZWF_STATUSCHANGE created #20081106173307
(IMP) INFO: import of ZWF_STATUSCHANGE completed (0 rows) #20081106173307
(DB) INFO: ZWF_STATUSCHANGE~0 created #20081106173307
(DB) INFO: disconnected from DB
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081106173307
/sapmnt/S01/exe/R3load: START OF LOG: 20081107092517
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 16 2008 18:23:56
/sapmnt/S01/exe/R3load -dbcodepage 4102 -i /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.cmd -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.log -stop_on_error -k 54FB9C39DB
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname   = "S0120081106091135                                                                                "
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "scar                                                            "
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "scar"
(GSI) INFO: release = "B.11.23"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "ia64"
(DB) INFO: disconnected from DB
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081107092541
/sapmnt/S01/exe/R3load: START OF LOG: 20081107111014
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 16 2008 18:23:56
/sapmnt/S01/exe/R3load -dbcodepage 4102 -i /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.cmd -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.log -stop_on_error -k 54FB9C39DB
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname   = "S0120081106091135                                                                                "
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "scar                                                            "
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "scar"
(GSI) INFO: release = "B.11.23"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "ia64"
(DB) INFO: disconnected from DB
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081107111041
The log file is 81163 lines long.
SAPAPPL1.log
/sapmnt/S01/exe/R3load: START OF LOG: 20081106102702
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 16 2008 18:23:56
/sapmnt/S01/exe/R3load -ctf I /mnt/s01_exp_uni/DATA/SAPAPPL1.STR /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/DDLORA.TPL /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL1.TSK ORA -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL1.log
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081106102703
/sapmnt/S01/exe/R3load: START OF LOG: 20081106103529
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 16 2008 18:23:56
/sapmnt/S01/exe/R3load -dbcodepage 4102 -i /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL1.cmd -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL1.log -stop_on_error -k 54FB9C39DB
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname   = "S0120081106091135                                                                                "
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "scar                                                            "
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "scar"
(GSI) INFO: release = "B.11.23"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "ia64"
(DB) INFO: /BDL/ADDONKEYS created #20081106103603
(IMP) INFO: import of /BDL/ADDONKEYS completed (0 rows) #20081106103603
(DB) INFO: /BDL/ADDONKEYS~0 created #20081106103603
(DB) INFO: /BDL/BADHOST created #20081106103603
(IMP) INFO: import of /BDL/BADHOST completed (0 rows) #20081106103603
(DB) INFO: /BDL/BADHOST~0 created #20081106103603
And so on until the end:
(DB) INFO: ZWF_INVH created #20081107211801
(IMP) INFO: import of ZWF_INVH completed (116640 rows) #20081107211817
(DB) INFO: ZWF_INVH~0 created #20081107211818
(DB) INFO: ZWF_INVI created #20081107211818
(IMP) INFO: import of ZWF_INVI completed (20557 rows) #20081107211820
(DB) INFO: ZWF_INVI~0 created #20081107211820
(DB) INFO: disconnected from DB
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081107211820
The log file is 52583 lines long.
There are 55 import log files and 28 export log files.
I hope some of this information is helpful for you and thank you again for your assistance!
Br Linus Hellsing

Error trying to display a report file in FDM event script

Hi
I am trying to display a file (report) during an event script and receive an error "Object reference not set to an instance of an object" . The process works in version 9.3 but is generating this error during our upgrade testing on 11.1.2.2 (different hardware)
The file (check report) is getting written correctly the \OutBox\Log directory. The file contains a standard Check Report with a file extension .pdf ( lngFileType = 31)
We have no issues creating the file
We try to display the file on the screen for the user using the following code which fails with the "Object reference not set to an instance of an object" error and also a message "Could not load XML file:" with the file name and path
'Open report file in web client
RES.PlngActionType = 4
RES.PstrActionValue = strFileName
Symptoms:
We can open the same file as text with RES.PlngActionType = 1
Everyone has rights to open/read a file in the directory
File can be opened manually and appears correct
Any help would be appreciated. I have not found similar issues on the forum. Support has offered no suggestions to date

Hi and thanks for your response.
Yes, we have tried all the various type of files ( ScriptActionTypes). The Type = 1 will open the file, but as a text stream without formatting, etc. If we try type = 3 we receive a different error message:
Error: Invalid Report ID: 0
Detail: Stacktrace:
upsAppServerDM._clsAppServerDM.fPublishReport(lngReportID[Int32], lngPubFileType[Int32], strReportSQL[String], strSubReportSQL[String])
Hyperion.FDM.Pages.ViewReportActionEvent.ExecuteReport(reportID[Int32], sqlStatement[String])
Hyperion.FDM.Pages.ViewReportActionEvent.PreviewReport()
Also, the Validation Report is enabled (we are using check with warnings - ID133), I have tried changing the default Web Settings from .PDF to .html and back again and tried the various other default options available under Web Settings.
If we create a simple test text file, we can open the file as text (Type = 1)
Here is the complete error message employing Type = 4 (XML)
Error: Object reference not set to an instance of an object.
Detail: Stacktrace:
Hyperion.FDM.Pages.IntersectionSummaryCheck.FillTitleRow()
Hyperion.FDM.Pages.IntersectionSummaryCheck.Page_Load(sender[Object], e[EventArgs])
System.Web.UI.Control.OnLoad(e[EventArgs])
Hyperion.FDM.Pages.BasePage.OnLoad(e[EventArgs])

Alignment problem on abap report after Unicode conversion

Hi,
I've recently convert my system to unicode. Now my user is complaining the aged debtor report (ABAP) is having a column alignment problem when displaying the Japanese character.
I'm not sure what to do now. Have anyone experience this and let me know how can I sove the problem?
/Eida

Hi,
you need to regenerate the data
For this regeneration, you start the program RKETREGP with the parameter
application class 'KK', subclass '01' and table name 'KKROBJ'.
br, Guido

How to validate data in editable ALV report after making changes

Hi Folks,
My requirement is to display data in ALV format with quantity field is editable. Once we get the data in display mode only quantity field is enabled right. I am going to make changes to that quantity field and updating that modifed value to the database table. Before updating databse table i want to validate the data for perticluar field which I edidted(Quantity).
Can you guide me on this.
Currently I am using FM: GET_GLOBALS_FROM_SLVC_FULLSCR and calling the method CHECK_CHANGED_DATA.
I want to validate the quantity data.
If I entered negative value like -100 instead of 100. It should validate and show some popup screen or message.
Pls guide me on this or give some code to do that.
Thanks&Regards,
Surendra

Hey Surendra,
Check if this helps: Link:[Click here|Edit Field in Oops Alv;
There are many posts available for this requirement. Please look SDN/web for same.
Regards,
Santosh

Incorrect BEx Report After Hierarchy Change

Company A belong to a hierarchy during Period 1 u2013 Period 3/2010. However, beginning P4/2010, Company A is no longer placed under this hierarchy.
When users run Income Statement report using this hierarchy in P6/2010, they are unable to view revenue registered by this company during P1u2013P3/2010 as the company is no longer available in this hierarchy during that period.
May I know how can we report this missing revenue figures for Company A whenever the report is executed post P4/2010?
Thanks!

Hi
I think you have to maintain the previous hierarchy so that all the GL accounts(chart of accounts - compounded with GL account) related to company A still exist in the hierarchy.
If there is a complete change in structure of hierarchy, then also add company A related nodes in the new hierarchy for the current financial year since Company A was partially existed in this FY.
Regards,
Pruthvi R

Unicode changes Multibye character problem

Hello,
We have made our production system unicode compliant. We have item master interface which extract data from material master. After unicode compliant, description fields length is increased and it affected our extract. There is not any change in description field before or after unicode changes. Given below three lines, First two lines is before unicode compliant, which is correct and third is after unicode compliant. You can clearly see the all the other fields after description has been moved by 2 characters. We want extract should generated as mentioned in first two lines.
MC01666-PT campaÃ±a redencion PAE re 0.020 31.0806030 9999 ZMPL 2 20060209 18
MC01666-PT campaÃ±a redencion PAE re 0.020 31.0806030 9999 ZMPL 2 20060209 18 MC01666-PT campaÃÂ±a redencion PAE re 0.020 31.0806030 9999 ZMPL 2 20060209 18
We have done following changes to make program unicode compliant. But this seems to be not working.
open dataset wm_datasetname for output in text mode encoding default.
Please advise. It's urgent.
Thanks

Hi Darshil...
Yes. i have tried ENCODING DEFAULT / ENCODING NON-UNICODE / ENCODING UTF-8. But it is not working,
By the way, these non-english characters are french.
Thanks
Yogesh

Error when trying to display a report

Hi,
when trying to display a report in Forms 11g 11.1.1.4 the window do not shows anything, the weblogic 10.3.4 is installed on Windows Server 2008 R2
The logs i saw are these, what could be the reason of the error, what should i do to fix it ??
rwserver_diagnostic.log
[2012-11-13T06:10:13.861-08:00] [WLS_REPORTS] [WARNING] [] [oracle.reports.server] [tid: 15] [userId: weblogic] [ecid: 8d029db4c88cfa6e:72f4635e:13ab3dc02b9:-8000-000000000000ccd7,0] [APP: reports#11.1.1.2.0] Multicast:init java.net.SocketException: Unrecognized Windows Sockets error: 0: no Inet4Address associated with interface
[2012-11-13T06:10:13.861-08:00] [WLS_REPORTS] [WARNING] [] [oracle.reports.server] [tid: 15] [userId: weblogic] [ecid: 8d029db4c88cfa6e:72f4635e:13ab3dc02b9:-8000-000000000000ccd7,0] [APP: reports#11.1.1.2.0] Multicast:init java.net.SocketException: Unrecognized Windows Sockets error: 0: no Inet4Address associated with interface
rwservlet_diagnostic.log
[2012-11-13T06:10:10.272-08:00] [WLS_REPORTS] [WARNING] [] [oracle.reports.servlet] [tid: 11] [userId: weblogic] [ecid: 8d029db4c88cfa6e:72f4635e:13ab3dc02b9:-8000-000000000000ccd7,1:29117] [APP: reports#11.1.1.2.0] Multicast:init java.net.SocketException: Unrecognized Windows Sockets error: 0: no Inet4Address associated with interface
[2012-11-13T06:10:10.288-08:00] [WLS_REPORTS] [WARNING] [] [oracle.reports.servlet] [tid: 11] [userId: weblogic] [ecid: 8d029db4c88cfa6e:72f4635e:13ab3dc02b9:-8000-000000000000ccd7,1:29117] [APP: reports#11.1.1.2.0] Multicast:init java.net.SocketException: Unrecognized Windows Sockets error: 0: no Inet4Address associated with interface
[2012-11-13T06:10:13.689-08:00] [WLS_REPORTS] [WARNING] [] [oracle.reports.servlet] [tid: 11] [userId: weblogic] [ecid: 8d029db4c88cfa6e:72f4635e:13ab3dc02b9:-8000-000000000000ccd7,1:29117] [APP: reports#11.1.1.2.0] RWClient:startInProcessServer start inprocess server rep_wls_reports_srvweblogic_asinst_1
[2012-11-13T06:10:14.656-08:00] [WLS_REPORTS] [WARNING] [] [oracle.reports.servlet] [tid: 15] [userId: weblogic] [ecid: 8d029db4c88cfa6e:72f4635e:13ab3dc02b9:-8000-000000000000ccd7,0] [APP: reports#11.1.1.2.0] Multicast:init java.net.SocketException: Unrecognized Windows Sockets error: 0: no Inet4Address associated with interface
[2012-11-13T06:10:14.656-08:00] [WLS_REPORTS] [WARNING] [] [oracle.reports.servlet] [tid: 15] [userId: weblogic] [ecid: 8d029db4c88cfa6e:72f4635e:13ab3dc02b9:-8000-000000000000ccd7,0] [APP: reports#11.1.1.2.0] Multicast:init java.net.SocketException: Unrecognized Windows Sockets error: 0: no Inet4Address associated with interface
WLS_REPORTS-diagnostic.log
[2012-11-09T13:44:41.421-08:00] [WLS_REPORTS] [NOTIFICATION] [] [oracle.reports.adminlogconfig] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <WLS Kernel>] [ecid: 0000Jfb8SNZ4YrWFLziOOA1GbN_0000002,0] [APP: reports#11.1.1.2.0] LogConfig.load: logging.xml
[2012-11-13T06:10:14.032-08:00] [WLS_REPORTS] [NOTIFICATION] [] [oracle.security.oes.util.logging.Log4jConfigurator] [tid: Thread-36] [userId: weblogic] [ecid: 8d029db4c88cfa6e:72f4635e:13ab3dc02b9:-8000-000000000000ccd7,0] Could not find log4j configuration for MicroSM.
[2012-11-13T06:10:14.235-08:00] [WLS_REPORTS] [NOTIFICATION] [JPS-03258] [oracle.jps.authorization.provider] [tid: Thread-36] [userId: weblogic] [ecid: 8d029db4c88cfa6e:72f4635e:13ab3dc02b9:-8000-000000000000ccd7,0] Initializing UserUtils; mbean: com.bea.security.providers.authorization.asi.ASIAuthorizationProviderMBeanImpl@f6467a1e([ASI Authorization Provider]), instance: null
[2012-11-13T06:10:14.235-08:00] [WLS_REPORTS] [NOTIFICATION] [JPS-03258] [oracle.jps.authorization.provider] [tid: Thread-36] [userId: weblogic] [ecid: 8d029db4c88cfa6e:72f4635e:13ab3dc02b9:-8000-000000000000ccd7,0] Initializing UserUtils; using directory: RootOrg!AdminDir, anonymous user: anonymousRegards
Carlos

This is not really the correct forum to be posting Reports issues. However, if I were to guess, your issue is likely related to the known issues related to installing FMw11R1 on machines which had IPv6 enabled. In most cases, disabling IPv6 would correct the problem, however some issues were not resolved even after disabling IPv6 post-install. I would recommend patching to WLS 10.3.6 and FMw 11.1.1.6 as these versions include fixes for all of those issues as far as I recall.
Consider referring to this MyOracleSupport document if you have access:
Steps to Maintain Oracle Fusion Middleware 11g Release 1 (11.1.1) (Doc ID 1073776.1)

Error in displaying hierachry report with TableView and Tableiterator

Hello,
I tried to create a BSP as shown in this tutorial:
/people/vijaybabu.dudla/blog/2008/08/04/display-hierarchy-report-in-bsp-using-tableview-and-tableview-iterator
When starting the BSP I get an error that a field symbol is not assigned in the method get_column_name.
When debugging the method get_column_name I can see that row_ref is initial. So the field symbols <row> and <col> are not assigned to any values, which causes the error some lines below.
METHOD get_column_value .
*-To get the Column values which is used in the Interator
FIELD-SYMBOLS: <row> TYPE ANY, <col> TYPE ANY, <cur> TYPE ANY.
ASSIGN row_ref->* TO <row>.
ASSIGN COMPONENT column_name OF STRUCTURE <row> TO <col>.
DATA tempchar(240) TYPE c.
IF currency IS NOT INITIAL.
    ASSIGN COMPONENT currency OF STRUCTURE <row> TO <cur>.
    WRITE <col> CURRENCY <cur> TO tempchar.
    MOVE tempchar TO column_value.
    CONCATENATE column_value ` ` <cur> INTO column_value.
ELSE.
    WRITE <col> TO tempchar.
    MOVE tempchar TO column_value.
ENDIF.
CONDENSE column_value.
ENDMETHOD.
Any help?
Thank you

Hi Patrick,
Thank you for the answer.
Unfortunately there is still the error with the unassigned field symbol after implementing the render_row_start method.
Any help?
Edit: It works now. There was an error with a wrong variable name (stupig mistake.)
Thanks for the help!
Edited by: Robert Karlovic on Mar 5, 2009 10:29 AM

Report 6i/Webdb -Not able to display the report in the browser - rep- 3002 error.

Would someone tell what I missed, I have set up the following:
1) a report using report builder on NT
2) my database is in Unix
3) my report server is started in NT
4) I run webdb listener for the following code: http://myweb.com/cgi/rwcgi60.exe?server=repserver+report=myreport+userid=usid/pw/connect_string+destype=cache+desformat=html. Then, I receive this message:
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - Report Job has terminated with error.
Reports Server Replies:
REP-3002: Error initializing printer. Please make sure a printer is installed.
Why is it thinking I want to use the printer whereas I want to display the report in the browser?. Any help would be appreciated.
null

It sounds like that your Web CGI did not configure right. To test if your CGI configuration is correct, type:
http://hostname:port/cgi-bin/rwcgi60exe?
If you get a help screen, then you should be able to bring up your report.
Regards,
Xiaoling

Internal error when try to display Interactive Report

Hello Gurus
I'm facing problem with displaying Interactive Reports in Web GUI (CRM 2007). When I try to open existing report or new created one, I see on the display area error "Load failed, Internal error" (no other system errors)
I think all configuration is done well, I have checked it by reports: Z_OLTP_CONFIG_CHECK and Z_OLTP_CONFIG_CHECK_BI, and except error DataSource /CRMBW/BOOL_TEXT is not active, everything is ok.
By the way - how can active this data source, while I can't find it anywhere, even in repository (RSA5)?
I thought maybe problem is with my browser or Flash player, but other functionalities uses flash work good (ie. key figures).
Any hints?
Best regards
Lukasz

Hi Łukasz ,
the answer: CRM Interactive Reporting- "Load failed, Internal error"
Pzdr,
Mateusz

After installing ilife '11 when i opened iPhoto its display a message"You can't open your current photo library using this version of iPhoto, what can i do sir??

i buy apple mac book on 12.04.2012, mac osx 10.7.2, 500gb hdd,4gb ram, i installed ilife '11 in it, after installing ilife '11 when i opened iPhoto its display a message"You can’t open your current photo library using this version of iPhoto,You have made changes to your photo library using a newer version of iPhoto. Do you want to quit and use the latest version of iPhoto, or do you want to create a new photo library? but option coming only quit, when i check for software update it shows ur software is up to date, waht can i do sir, how can i use my iphoto???

Make sure you are updated to the latest version - 9.2.1
LN

I occasionally get an error that forces me to shut down/restart my computer. After restart, a message pops up stating that an error has occurred and a report will be sent to Apple. This hass been going on for several months, and Apple has never contacted

I occasionally get an error that forces me to shut down/restart my computer. After restart, a message pops up stating that an error has occurred and a report will be sent to Apple. This has been going on for several months, and Apple has never contacted me about this problem. Other than the forced shutdown/restart, I have had no problems with Garage Band.

I occasionally get an error that forces me to shut down/restart my computer. After restart, a message pops up stating that an error has occurred and a report will be sent to Apple. This has been going on for several months, and Apple has never contacted me about this problem. Other than the forced shutdown/restart, I have had no problems with Garage Band.

Getting 404 not found error-while creating classic report - after sql query

my work space - upgrade
while iam trying to develop a page today in work space - under classic report - after i provided the query and when pressed next to go to report attribuites section - iam facing 404 not found issue.,
this is happening just today.
and all teh other pages are working fine - do not know what ios the issue - can anybody help me here please..
query used for classic report
select DISTINCT cust.customer,prod.ebs_team
from
CUSTOMER_11i@upgrade Cust
,BUG_PRODUCTS@upgrade PROD
where 1=1
and cust.product_id = prod.product_id
and prod.prodline = 'EBS'
and IS_CUST_11 = 'YES'
and NVL(IS_CUST_121,'NO') = 'NO'
and NVL(IS_CUST_12,'NO') = 'NO'
order by 1;
with regards
Shiva Prasad.k
Edited by: user759720 on Feb 14, 2012 5:00 AM

Hi Shiva,
to diagnose a 404 error please have a look at http://www.inside-oracle-apex.com/oracle-apex-got-404-not-found-2/
This should give you sufficient information to find out what is actually failing.
Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

Error in ITS display of reports after Unicode changes

Similar Messages

Maybe you are looking for