Error in Itunes when getting a podcast that requires a password
I am receiving a paid for podcast from Kim Komando a computer show. It requires that you pay for it so in order to download her podcast Itunes requires a password, but it seems, frequently, that if the password is not clicked O.K. on quickly enough Itunes gets an error and needs to close which prevents everything from updating as well as her podcasts. Any ideas for preventing this problem. I have already, just yesterday also posted to her message boards, but they are a little slow-some are dated 9/3 I recently noticed so who knows when I'll get picked up there. If this continues, and I have to keep manually downloading the show in order to get it every week and day or miss it I might cancel altogether since it's just not worth it.
Nevermind, I figured it out this morning. The CDs that I have ripped in 192 all load up good without errors and I just have to drag CDs that are ripped in VBR by transferring 2 songs at a time to get it all loaded up. That is weird, but thank goodness it had nothing to do with iTunes. I was just confused... that's all.
Similar Messages
-
When I go to a site that requires a password, i get a pop up that asks if I want the password remembered. There is a gold key. and there is a gray key next to the website address
Tools > Options -> Security - Passwords
un-check = '''Remember passwords for sites''' -
I installed itunes and quick time but when I try to open itunes I get a message that reads "quicktime failed to initialize (error -2096). I have removed both itunes and quicktime from my computer and re-installed them and I still get the same message. What do I do to get itunes to work?
That one is often a compatibility mode problem. Try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode -
When I try to reinstall Itunes, I get the message that says "runtime error". What to do?
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
How do I download a movie to my iphone 3G? When I click 'rent' in itunes, I get a message that there is not enough available local storage, but I can manage storage on my device in 'Settings'. I have activated icloud, but don't know how to change my storage so that I can rent and watch the movie on my phone. thanks for any help you can give.
I always do my Rentals with the itunes program on the computer.
Make rental from itunes store. It will show in movies under library, DO NOT click to play it. Plug in the device to the computer. Click the name of the device on left. Click on movies. There is an option to copy to the device. Sync. obviously you still need space on ipad to put rental but you can have it take computers hard drive space until you need it. -
When i try to open itunes i get a message that says the file "itunes library .itl" cannot be read because it was created by a newer version of itunes
Upgrade iTunes to the latest version. It should be 10.5.3.
-
I recently transfered everything from my emac to another one but now when I try to open iTunes I get the window that states: The file "iTunes Library" cannot be read because it was created by a newer version of iTunes. The computer I transfered to had a bunch of files on it and I got full ownership of what was already there, so, how do I get to my iTunes library, I do have access as an administrator to the iTunes library (that works just fine) already there and I guess I must have had a newer version ofiTunes on my defunt eMac....
Tell us some version numbers please, of your Mac OS versions and iTunes versions on both computers (two eMacs yes?).
dlrobinson49 wrote:
I guess I must have had a newer version ofiTunes on my defunt eMac....
That is a pretty good guess.Try updating the second eMac's iTunes to at least the version that was on the first. -
A lot of my music is on an external Hard Drive, currently "H" drive. When I try to play a song in the Library in Itunes I get the message that it can't find the music. Info says it's in a different location "G" Drive. But it's not. it's in "H" Drive. How do I tell it where to go?
What if you take this same topic of an external hard drive with music but instead of directly attached to the computer the music is on a Network Attached hard drive(NAS)? Will I be able to add music to my ipod without any problem? Step that up a notch, will the two computers on my network be able to recognize the music on the NAS? Will the two users be able to create their own playlists and update their ipods independently? Now step up that up one more notch, will I be able to do this with one PC running XP and my macbook with OS X?
Before I run out and buy a NAS I want to be certain. I also would like to convert my DVD library in the future and put it on the network available to an AppleTV or other UpNp media player in the future, because I love having power at my finger tips. -
2nd day w/my ipad2. Have spent 5 hours trying to get my ipod music to play on the ipad..it has been downloaded and synced. When I click on itunes , I get a window that says "Apple mobile device service is not started." I get music symbol when click ipod.
http://support.apple.com/kb/ts1567
-
When I plug my iPhone into my computer to sync my iTunes I get a message that says "iTunes cannot read the content of the iPhone" and wants me to restore my phone back to factory settings. Any suggestions so that I don't have to restore? I have all of my stuff backed up on iCloud but I really don't want to go through the hassle of wiping it clean and putting everything back on.
This is a post from a user named edgar999 and it worked PERFECTLY:
"OK - this is how it works:
In order to backup from iCloud you cannot use iTunes!
Therefore disconnect your device from your computer.
Turn on your device and go to Settings and then go to General.
At the bottom of this submenu there is a buttom "Reset"
If you push that buttom you see 6 different Erase settings to chose from!
Chose "Erase All Content and Settings" because this will wipe everything from your device and will let you restore from iCloud! (I tried the top "Reset All Settings" but that did not let me use iClouds afterwards!)
Once you pushed that buttom your device will be wiped clean and after some time you will see the Device Welcome Screen like on a new device!
After choosing your location you will be asked to setup your WiFi-conection. After you joint to your Wifi you will be given the choice to restore the iPad from a backup from the iCloud. Choosing this backup will prompt you with your apple ID and password.
Restoring from a backup can take some time. The process uses your Wi-Fi connection to download settings, content and data. If you had a lot of content on your device, this can take a while. The restore screen should give you estimates at each stage of the restore process, starting with restoring the settings and then booting into the iPad. When the iPad home screen appears, the device will continue the restore process by downloading all of your applications.
If you are restoring from a backup because you have run into problems with your device that can only be solved by restoring it, you can first choose your latest backup. If you still have problems, you can move on to the next latest backup, repeating the process until (hopefully) the problem is cleared."
THANK YOU edgar999!!!! -
When I open ITunes, I get a message that "iTunes has stopped working". I have tried reinstalling iTunes, creating a new user file, changing the startup programs in accordance with articles in iTunes troubleshooting, but am having no success in getting iTunes to stay open. Any fixes for this problem?
-
My iPad conveys that it is disabled, and that I need to connect to iTunes. When I connect to iTunes I get a message that I need to enter my pass code and open my Ipad, but I don't get the scree with the number board to open with a password. How do I fix this?
You will need to restore it. The sidebar of your iPad appears on itunes even if you dont enter the passcode. There's the option to restore it. More info:
iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software -
My iPad conveys that it is disabled, and that I need to connect to iTunes. When I connect to iTunes I get a message that I need to enter my pass code and open my Ipad, but I don't get the screen to open with a password. How do I fix this?
You will need to restore it. It may not sync, but the iPad's sidebar has to appear you can restore it and it will be as the last time ou synced it to iTunes. For more info:
iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software -
I was installing iTunes 11.1.4 and it was unsuccessful. I get the message 'Error 7 (Windows error 126). If I now try to open iTunes I get the message that 'MSCVR80.dll' is missing from my computer. Trying to download again has not solved the problem.
Troubleshooting issues with iTunes for Windows updates - MSVCR80
-
When I open iTunes, I get a message that the files in my library are "unchecked." What does this mean and how do I fix it?
Windows - Ctrl-clicking a checkbox causes all tracks in the current display to become checked or unchecked.
Additional suggestions in connection with syncing - https://discussions.apple.com/message/19096229
Maybe you are looking for
-
Sharepoint 2013 Server Search Not Working, URGENT!!
Hi thr, im a current sharepoint 2013 server user and im facing a severe problem with sharepoint now, i cannot search using the search bar And the Search Service Application keeps giving me this error, 'The search service is not able to connect to th
-
Need to move Mailboxes from an old Powerbook to a new desktop iMac G5.
I already asked on some discussion group but somehow lost it and have to re enter my question. I have an old Powerbook G4 that I had to use for a few months but now have my new iMac G5 desktop Intel Core and need to copy all the Mail in mailboxes ont
-
Need help getting my surround sound to work when watching TV
I recently got the Samsung Blueray Home Theatre system and it works fine while watching movies, but I can't seem to get the system to work while watching regular tv? Any ideas?
-
I have a MacBook Pro and can't get my microphone to work on the audio port. I go to Preferences and choose the audio port to work for sound input, but it doesn't do it. It only works picks up sound through the internal microphone. Can anyone advise m
-
Highlighting an editable text sprite
I have a bunch of form type of pages on my stage. User enters text, jumps to a new screen, edits more text. Typically, the cursor will be blinking at the sprite in the lowest channel, which would ebbe my top item on the page. Sometimes, I may have fo