Error in J1IF01, i.e., when creation of sc challan
Dear Experts,
When Doing J1IF01, Sub-Contracting Challan...
System is giving the Error...
No Modevat Credits availed for 57FC for Excise group --XX
Please help me.....
NOTE:
I have maintained all Cutomizing Settings.
Please...
Hi ,
Firstly i would like to know if you are working on some pirated SAP software?? Usually this error comes from those systems.
when the system licence and your system date does not match this sort od error will be displayed.
Check OMSY settings for periods and is it in line with your system date??
Thanks & regards,
Kiran
Similar Messages
-
RC-50004: Fatal: Error occurred in ApplyDatabase:Control file creation fail
Hi,
During the clone of R12.1 instance, while running the post clone on the DB tier, i am getting the following error
RC-50004: Fatal: Error occurred in ApplyDatabase:Control file creation failed.
when i looked into the log file, i can find this
Creating the control file for hr12at1_jsrc-cn6 database ...
SQL*Plus: Release 11.1.0.7.0 - Production on Tue Nov 17 04:41:58 2009
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1071333376 bytes
Fixed Size 1318172 bytes
Variable Size 427819748 bytes
Database Buffers 629145600 bytes
Redo Buffers 13049856 bytes
Control file created.
alter database open resetlogs
ERROR at line 1:
ORA-01152: file 2 was not restored from a sufficiently old backup
ORA-01110: data file 2:
'/u01/app/oracle11/db/apps_st/u32/oradata/R12HRM/tx_data11.dbf'
Please help
thanks a lot
SasikalaHi,
Sorry, my mistake, I did not pay attention to the cloning part.
For this error, looks like the database was not cleanly shutdown before copying the files or that preclone was not run successfully. You will have to run preclone again, and shutdown the database normally, then copy the file again.
Regards,
Hussein -
RC-50004: Fatal: Error occurred in ApplyDatabase: Control file creation fai
Hi guys,
I am cloning and EBS 12.1.3 from one server to another, and when Configuring the target system database server with ''perl adcfgclone.pl dbTier'', I am getting the following error:
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
MOS is saying that it is due to wrong permissions on the /var/tmp/.oracle directory and we should give it the following permissions:
chmod 777 /var/tmp/.oracle
After giving those permissions and rebooting the server , and running the perl adcfgclone.pl dbTier script, I am still having the same problem:
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
This is the contents of the ApplyDBTier log file (since the file exceed 30.000 characters, i am going to post the parts where the errors occur:
[oratest@DLAERPSRV01 ERP_DLAERPSRV01]$ cat ApplyDBTier_05021530.log
Started ApplyDBTier at Thu May 02 15:30:44 WAT 2013
Version:
ApplyDBTier.java : 120.6.12010000.3
ApplyDBTier (prog) -1 true true true...
# Calling ApplyDBTechStack...
Executing runInstallDriver...
Started unzipping files...
Completed runInstallDriver.
Executing home registration for s_db_oh...
instantiate file:
source : /u02/oratest/db/tech_st/11.1.0/appsutil/template/adouidb.pl
dest : /u02/oratest/db/tech_st/11.1.0/appsutil/clone/ouicli.pl
backup : /u02/oratest/db/tech_st/11.1.0/appsutil/clone/ouicli.pl to /u02/oratest/db/tech_st/11.1.0/appsutil/out/ouicli20.pl
setting permissions: 700
setting ownership: oratest:dba
instantiate file:
source : /u02/oratest/db/tech_st/11.1.0/appsutil/template/config_ux.tmp
dest : /u02/oratest/db/tech_st/11.1.0/rdbms/lib/config.c
backup : /u02/oratest/db/tech_st/11.1.0/rdbms/lib/config.c to /u02/oratest/db/tech_st/11.1.0/appsutil/out/config21.c
setting permissions: 700
setting ownership: oratest:dba
instantiate file:
source : /u02/oratest/db/tech_st/11.1.0/appsutil/template/adlnkoh.sh
dest : /u02/oratest/db/tech_st/11.1.0/appsutil/clone/adlnkoh.sh
backup : /u02/oratest/db/tech_st/11.1.0/appsutil/clone/adlnkoh.sh to /u02/oratest/db/tech_st/11.1.0/appsutil/out/adlnkoh20.sh
setting permissions: 700
setting ownership: oratest:dba
Executing script in InstantiateFile:
/u02/oratest/db/tech_st/11.1.0/perl/bin/perl -I /u02/oratest/db/tech_st/11.1.0/perl/lib/5.8.3 -I /u02/oratest/db/tech_st/11.1.0/perl/lib/site_perl/5.8.3 -I /u02/oratest/db/tech_st/11.1.0/appsutil/perl /u02/oratest/db/tech_st/11.1.0/appsutil/clone/ouicli.pl
script returned:
Beginning OUI CLI cloning for s_db_ohThu May 2 15:30:46 2013
/u02/oratest/db/tech_st/11.1.0/appsutil/jre/bin/java -classpath /u02/oratest/db/tech_st/11.1.0/appsutil/java:/u02/oratest/db/tech_st/11.1.0/oui/jlib/OraInstaller.jar:/u02/oratest/db/tech_st/11.1.0/appsutil/java/xmlparserv2.jar oracle.apps.ad.clone.util.OracleHomeCloner -OUICLI -e /u02/oratest/db/tech_st/11.1.0/appsutil/ERP_DLAERPSRV01.xml -nolink -oaVar s_db_oh -homestub db -log /u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/ohclone.log
Running OUI CLI home cloning from within OracleHomeCloner:
/u02/oratest/db/tech_st/11.1.0/oui/bin/runInstaller -clone -silent -force -nolink -waitForCompletion -invPtrLoc /u02/oratest/db/tech_st/11.1.0/admin/oui/ERP_DLAERPSRV01/oraInst.loc ORACLE_HOME=/u02/oratest/db/tech_st/11.1.0 ORACLE_BASE=/u02/oratest/db/tech_st/11.1.0 ORACLE_HOME_NAME=ERP_DB__u02_oratest_db_tech_st_11_1_0 -J-Doracle.installer.noLink=true
Finished OUI CLI cloning for s_db_oh with return code: 0Thu May 2 15:30:56 2013
Executing script in InstantiateFile:
/u02/oratest/db/tech_st/11.1.0/appsutil/clone/adlnkoh.sh
script returned:
adlnkoh.sh started at Thu May 2 15:30:56 WAT 2013
Log file located at /u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/make_05021530.log
Using make file "ins_emagent.mk" for linking SYSMAN utilities...
Error while running adlnkoh.sh.
return code = .16
Please check logfile located at /u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/make_05021530.log
.end std out.
.end err out.
Executing Technology Stack Configuration...
Executing runAutoConfig...
Deleting files of type INSTALL
Checking for file: /u02/oratest/db/tech_st/11.1.0/network/admin/ERP_DLAERPSRV01/sqlnet.ora
Processing driver file: /u02/oratest/db/tech_st/11.1.0/appsutil/template/addbtmpl.drv
Checking for file: /u02/oratest/db/tech_st/11.1.0/appsutil/install/ERP_DLAERPSRV01/txkConfigDbOcm.pl
File exists
File deleted
Checking for file: /u02/oratest/db/tech_st/11.1.0/dbs/initERP.ora
File exists
File deleted
Checking for file: /u02/oratest/db/tech_st/11.1.0/network/admin/ERP_DLAERPSRV01/listener.ora
File exists
File deleted
Checking for file: /u02/oratest/db/tech_st/11.1.0/network/admin/ERP_DLAERPSRV01/tnsnames.ora
File exists
File deleted
Testing for RAC specific parameters before running autoconfig
No RAC specific parameters were found, running with CVM
Starting CVM in INSTE8_SETUP mode
Using Context file : /u02/oratest/db/tech_st/11.1.0/appsutil/ERP_DLAERPSRV01.xml
Attempting to create a back up of the Context file
Created back up file of name :
/u02/oratest/db/tech_st/11.1.0/appsutil/out/ERP_DLAERPSRV01/05021531/ERP_DLAERPSRV01.xml
===========================================================================
Starting synchronization of file system Context file and its templates with those in the database
Database connection : Failed
OAM Context editing support feature: Unverified
OAM Customization support feature : Unverified
File system template : /u02/oratest/db/tech_st/11.1.0/appsutil/template/adxdbctx.tmp
Checking for customizations to Context template
Warning: Unable to connect to Database.
If the system is OAM enabled, this may result in loss of customizations.
Looking for custom template at : /u02/oratest/db/tech_st/11.1.0/appsutil/template/custom/adxdbctx.tmp
Custom template : Not Available
Customizations found : None
File system Context file :/u02/oratest/db/tech_st/11.1.0/appsutil/ERP_DLAERPSRV01.xml
Checking the Context file for possible updates from the Database
Warning: Unable to connect to Database.
If the system is OAM enabled, this may result in loss of customizations and the Context files in DataBase and in the file system may be unsynchronized
===========================================================================
Starting Updates of Context file Thu May 02 15:31:44 WAT 2013
found context version : 120.34.12010000.14
available update version : 120.34.12010000.14
No updates to apply
Starting DB listener with command:
/u02/oratest/db/tech_st/11.1.0/appsutil/scripts/ERP_DLAERPSRV01/addlnctl.sh start ERP
Logfile: /u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/addlnctl.txt
You are running addlnctl.sh version 120.1.12010000.4
Starting listener process ERP ...
LSNRCTL for Linux: Version 11.1.0.7.0 - Production on 02-MAY-2013 15:32:23
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Starting /u02/oratest/db/tech_st/11.1.0/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.1.0.7.0 - Production
System parameter file is /u02/oratest/db/tech_st/11.1.0/network/admin/ERP_DLAERPSRV01/listener.ora
Log messages written to /u02/oratest/db/tech_st/11.1.0/admin/ERP_DLAERPSRV01/diag/tnslsnr/DLAERPSRV01/erp/alert/log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=DLAERPSRV01.camairco.local)(PORT=1523)))
STATUS of the LISTENER
Alias ERP
Version TNSLSNR for Linux: Version 11.1.0.7.0 - Production
Start Date 02-MAY-2013 15:32:23
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u02/oratest/db/tech_st/11.1.0/network/admin/ERP_DLAERPSRV01/listener.ora
Listener Log File /u02/oratest/db/tech_st/11.1.0/admin/ERP_DLAERPSRV01/diag/tnslsnr/DLAERPSRV01/erp/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523)))
Services Summary...
Service "ERP" has 1 instance(s).
Instance "ERP", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
addlnctl.sh: exiting with status 0
addlnctl.sh: check the logfile /u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/addlnctl.txt for more information ...
.end std out.
.end err out.
checking DB Connection...
DEBUG: checkDBConnection in()
ADX Database Utility
getConnection() -->
sDbHost : DLAERPSRV01
sDbDomain : camairco.local
sDbPort : 1523
sDbSid : ERP
sDbUser : apps
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@DLAERPSRV01.camairco.local:1523:ERP
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP)))
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP.camairco.local)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
DEBUG: checkDBConnection out()
Skipping Profile Phase
Skipping Apply Phase
Executing CreateDB...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : DLAERPSRV01
sDbDomain : camairco.local
sDbPort : 1523
sDbSid : ERP
sDbUser : apps
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@DLAERPSRV01.camairco.local:1523:ERP
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP)))
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP.camairco.local)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
adcrdb.sh started at Thu May 2 15:32:40 WAT 2013
The environment settings are as follows ...
ORACLE_HOME : /u02/oratest/db/tech_st/11.1.0
ORACLE_SID : ERP
TWO_TASK :
PATH : /u02/oratest/db/tech_st/11.1.0/perl/bin:/u02/oratest/db/tech_st/11.1.0/bin:/usr/bin:/usr/sbin:/u02/oratest/db/tech_st/11.1.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/u02/oratest/db/tech_st/11.1.0/appsutil/clone/bin/../jre/bin:/u02/oratest/db/tech_st/11.1.0/appsutil/clone/bin/../jre/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/oratest/bin:.
LD_LIBRARY_PATH : /u02/oratest/db/tech_st/11.1.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/u02/oratest/db/tech_st/11.1.0/lib:/usr/dt/lib:/u02/oratest/db/tech_st/11.1.0/ctx/lib
Executable : /u02/oratest/db/tech_st/11.1.0/bin/sqlplus
The log information will be written to
/u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/adcrdb_ERP.txt
Creating the control file for ERP_DLAERPSRV01 database ...
SQL*Plus: Release 11.1.0.7.0 - Production on Thu May 2 15:32:40 2013
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORA-27154: post/wait create failed
ORA-27300: OS system dependent operation:semget failed with status: 22
ORA-27301: OS failure message: Invalid argument
ORA-27302: failure occurred at: sskgpbitsper
CREATE CONTROLFILE REUSE SET DATABASE "ERP"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter database open resetlogs
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter tablespace TEMP add tempfile '/u02/oratest/db/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
ALTER DATABASE RENAME GLOBAL_NAME TO "ERP.camairco.local"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Connected to an idle instance.
ORA-27154: post/wait create failed
ORA-27300: OS system dependent operation:semget failed with status: 22
ORA-27301: OS failure message: Invalid argument
ORA-27302: failure occurred at: sskgpbitsper
BEGIN dbms_backup_restore.zeroDbid(0); END;
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
ORACLE instance shut down.
Connected to an idle instance.
ORA-27154: post/wait create failed
ORA-27300: OS system dependent operation:semget failed with status: 22
ORA-27301: OS failure message: Invalid argument
ORA-27302: failure occurred at: sskgpbitsper
CREATE CONTROLFILE REUSE SET DATABASE "ERP"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter database open resetlogs
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter tablespace TEMP add tempfile '/u02/oratest/db/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
ALTER DATABASE RENAME GLOBAL_NAME TO "ERP.camairco.local"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
declare lib_ver varchar2(3);
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
ERROR:
ORA-01012: not logged on
Process ID: 0
Session ID: 0 Serial number: 0
Disconnected
exit_code=1
Checking for errors ...
The database has not been successfully created. Shutting down the instance ...
SQL*Plus: Release 11.1.0.7.0 - Production on Thu May 2 15:32:42 2013
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Disconnected
.end std out.
.end err out.
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : DLAERPSRV01
sDbDomain : camairco.local
sDbPort : 1523
sDbSid : ERP
sDbUser : apps
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@DLAERPSRV01.camairco.local:1523:ERP
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP)))
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP.camairco.local)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
StackTrace:
java.lang.Exception: Control file creation failed
at oracle.apps.ad.clone.ApplyDatabase.doConf(ApplyDatabase.java:635)
at oracle.apps.ad.clone.ApplyDatabase.doApply(ApplyDatabase.java:473)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:366)
at oracle.apps.ad.clone.ApplyDBTier.<init>(ApplyDBTier.java:110)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
at java.lang.reflect.Constructor.newInstance(Unknown Source)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:67)
at java.lang.Thread.run(Unknown Source)
[oratest@DLAERPSRV01 ERP_DLAERPSRV01]$
Please guys, how can I solve this problem?@Hussain Sawwan
Hi Hussain,
After successfully configured the DbTier and AppsTier with their respective post clone scripts the appstier was automatically started at the end.
But now, I can't seem to connect with my IE 9 and Firefow browsers.
Link: http://dlaerpsrv01.camairco.local:8002/OA_HTML/
Contents of the portpool.lst:
***** List of ports allocated based on port pool 2 *****
Database Port : 1523 (EXT_PORT)
RPC Port : 1628
Web SSL Port : 4445
ONS Local Port : 6102
ONS Remote Port : 6202
ONS Request Port : 6502
Web Listener Port : 8002
Active Web Port : 8002 (DUP_PORT)
Forms Port : 9002
Metrics Server Data Port : 9102
Metrics Server Request Port : 9202
JTF Fulfillment Server Port : 9302
MSCA Server Port : 10212-10217
MCSA Telnet Server Port : 10212,10214,10216 (DUP_PORT)
MSCA Dispatcher Port : 10806
Java Object Cache Port : 12347
OC4J JMS Port Range for Oacore : 23010-23014
OC4J JMS Port Range for Forms : 23510-23514
OC4J JMS Port Range for Home : 24010-24014
OC4J JMS Port Range for Oafm : 24510-24514
OC4J JMS Port Range for Forms-c4ws : 26510-26514
OC4J AJP Port Range for Oacore : 21510-21514
OC4J AJP Port Range for Forms : 22010-22014
OC4J AJP Port Range for Home : 22510-22514
OC4J AJP Port Range for Oafm : 25010-25014
OC4J AJP Port Range for Forms-c4ws : 26010-26014
OC4J RMI Port Range for Oacore : 20010-20014
OC4J RMI Port Range for Forms : 20510-20514
OC4J RMI Port Range for Home : 21010-21014
OC4J RMI Port Range for Oafm : 25510-25514
OC4J RMI Port Range for Forms-c4ws : 27510-27514
[root@DLAERPSRV01 appltest]#
Entry in the /etc/hosts in my Win 7 Laptop:
192.168.0.245 dlaerpsrv01.camairco.local dlaerpsrv01
What could be the cause of this problem? It is unfortunate to reach at this point and not being able to connect. -
Error occurs during Asset Master Record Creation.
Hello SAP Gurus,
The error occurs during asset master record creation.
Our fiscal year variant is Z6 (July to June). The asset was acquired in June 15 (previous fiscal year) but was only set up on July 30 (this fiscal year) . When we put the depreciation start date as 15 June the error appeared. While saving the Asset master we are getting below error.
We tried the same with Post Capitalization of Asset (ABNAN) there also we are getting same error.
ERROR: - as below
u2003
SYST: *You cannot determine the period for rule 02 to 05.08.08 ( todayu2019s date )*
*Message no. AA613*
*Diagnosis*The system could not determine a depreciation period on 05.08.08 for period control 02 of the period control method of phase N1 of depreciation key INTERN-00001-0000.
Procedure
Maintain the assignment of the periods for the period control entered.
Proceed
If the period control you entered is a standard period control, you can assign the periods automatically.Proceed
Please find enclosed attachment for clear description of the error.
Please share your experiences regarding this subject.
Thanking you in anticipation.
Regards,
Suresh.
09986375966Hi,
have you generated the period controls properly? If not, the error is raised correctly by the system.
To generate period controls go to:
IMG Asset Accounting -> Depreciation -> Valuation Methods -> Period Control -> Generate Period Controls / or you can use OA84
Regards,
Markus -
dear associates,
linux version: red hat enterprise linux 4.0.
EBS version: 12.1.1
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instancedear associates,
can u please assist me how can over come this error or problem.
linux version: red hat enterprise linux 4.0.
EBS version: 12.1.1
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance -
I'm in UK but am getting Errors 503, 105007 and 105002 when trying to update
I'm in UK but am getting Errors 503, 105007 and 105002 when trying to publish updates to 2 websites. System maintenance is going on right now in US and Australia but nothing about Europe. its Sunday 1900 here ( UTC+1)
I was getting the same errors about 20 hours ago too - surely maintenance in US won't affect Europe and wouldn't prevent publishing for 24 hours?
Any suggestions = I guess the Adobe help desk will be SNAFUFrom BC Blog Post:
Partner registration, Trial site creation Muse Publish, APIs, FTP and some admin section will not be available for 4 hours on all data centers.
If you see the errors after maintenance is complete contact BC Support. -
Error in begining a session when using UTF16 mode in OCIEnvNlsCtreate
I wrote this code :
OCIEnv* envhp;
OCIError* errhp;
OCIServer* srvhp;
OCISvcCtx* svchp;
OCISession* usrhp;
envhp = (OCIEnv *) 0;
errhp = (OCIError *) 0;
srvhp = (OCIServer *) 0;
svchp = (OCISvcCtx *) 0;
usrhp = (OCISession *) 0;
int mode = OCI_DEFAULT;
char* dblink=/* DBLINK */;
sword status;
OCIEnvNlsCreate ( &envhp, (ub4) mode, (dvoid *)0,(dvoid*(*)(dvoid ctxp, size_t size))0,(dvoid(*)(dvoid ctxp, dvoid memptr, size_t newsize))0,(dvoid (*)(dvoid ctxp, dvoid memptr))0,(size_t)0, (void **)0, (ub2)OCI_UTF16ID, (ub2)OCI_UTF16ID);
OCIHandleAlloc((dvoid*)envhp, (dvoid**)&errhp, (ub4)OCI_HTYPE_ERROR,(size_t)0, (dvoid**)0);
OCIHandleAlloc((dvoid*)envhp, (dvoid**)&srvhp, (ub4)OCI_HTYPE_SERVER,(size_t)0, (dvoid**)0);
status = OCIServerAttach(srvhp, errhp, (text*)dblink,(sb4)strlen(dblink), (ub4)OCI_DEFAULT);
if (status != OCI_SUCCESS)
return 0;
char username = /username*/;
char password = /password*/;
OCIHandleAlloc((dvoid*)envhp, (dvoid**)&svchp, (ub4)OCI_HTYPE_SVCCTX,(size_t)0, (dvoid**)0);
OCIAttrSet((dvoid*)svchp, (ub4)OCI_HTYPE_SVCCTX, (dvoid*)srvhp, (ub4)0,(ub4)OCI_ATTR_SERVER, errhp);
OCIHandleAlloc((dvoid*)envhp, (dvoid**)&usrhp, (ub4)OCI_HTYPE_SESSION,(size_t)0, (dvoid**)0);
OCIAttrSet((dvoid*)usrhp, (ub4)OCI_HTYPE_SESSION, (dvoid*)username,(ub4)strlen(username), (ub4)OCI_ATTR_USERNAME, errhp);
OCIAttrSet((dvoid*)usrhp, (ub4)OCI_HTYPE_SESSION, (dvoid*)password,(ub4)strlen(password), (ub4)OCI_ATTR_PASSWORD, errhp);
status = OCISessionBegin(svchp, errhp, usrhp, OCI_CRED_RDBMS, (ub4)OCI_DEFAULT);
When I use OCI_UTF16ID in OCIEnvNlsCreate it gives me an error in OCISessionBegin. But when I use 871(utf8) instead it works properly. Why does this happen? How can I work whit OCI_UTF16ID?Re: OCIObjectSetAttr() and UTF16 environnement might be of interest, even though it's a little different. Still relates to UTF16 though. --DD
-
how can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,…"
It sounds like if you open Preferences in Word there will be a place where you can specify where to store autorecover files. Right now it sounds like it's pointing to somewhere that doesn't exist.
-
Help needed,
I am getting this message sandbox environment error no test user account, when downloading any application from iTunes, friend told me to sign out and sign in iTunes it might solve the problem , and i triyed it but still I cannot login I to my itune account. Same message keeping. Popping up, this problem started supricly today.Take a look at the instructions here.
http://www.technogal.net/2012/03/this-is-not-test-user-account-please.html -
Hi,
Not able to open PDF or do any changes even if the PDF opens. Run Time Error is shown every time when trying to open PDF. Please helpHi Shilpa ,
Please refer to the following link and see if that helps you out.
https://helpx.adobe.com/acrobat/kb/runtime-error-roaming-profile-workflows.html
Are you trying to access the PDF with Acrobat or Adobe Reader?
Regards
Sukrit Dhingra -
Fatal Internal Error: "image.cpp", line 13192 when trying to insert a cursor to graph
NOTE: This IS a duplicate post from the Breakpoint. Text slightly changed. The post in Breakpoint can be deleted. All comments should be placed in this thread.
I resolved the "Fatal Internal Error: "image.cpp", line 13192 when trying to insert a cursor to graph", but would like to share to find out if others have seen this and to determine whether this is a bug, or if it's time to redo my PC, or buy a new one..
I have an existing graphs (qt 6) which originally had 2 cursors. This occurred while trying to add the third cursor.
Up until attempting to add the last cursor, the program worked great, and I had been running tests for a while. However, I do recall seeing this problem when creating the original cursors, but not to this extent. Plus I don't remember the original error message from that time.
I needed to add one more cursor to the existing graphs. As soon as I add a new cursor and set it's properties, I get a nasty error message and without warning LV8.2 simply closes itself (well, the only warning was the error message. Tried it 3 times, same result.
Here are the steps:
Shut down the PC, went for a coffee, rebooted the PC. Opened the LV project, opened the VI. Immediately went to the graph properties to add the new cursor by doing the following steps:
Right click graph indicator icon on block diagram.
Select Properties.
Click on cursor tab.
Click on Add
Select Cursor 2 (3rd one, newly created)
Change color
Select cursor as a line
Remove checkmark for "show cursor"
Click OK
I need to do this to 3 other graphs, same steps. And as soon as I get to the step before clicking OK, I get the error message.
I managed to get an additional one done, by immediately saving after each step (yep going in & out of the properties). But I've had this problem before when creating the first two cursors.
Is it a bug? Anyone else seen this? Using LV8.2. And the message is right about LOOSING ALL unsaved work!!!!
Here are more observations:
Tried creating a new one on the second graph. As soon as I clicked on the color, it crashed!
See the error explanation below. It is really clear, now anyone can solve it LOL!!... According to the error log, there's a bad image out there
.\manager\image.cpp(13192) : DAbort: bad image in ValidateImage
$Id: //labview/branches/Europa/dev/source/manager/image.cpp#47 $
0x007A81E8 - LabVIEW <unknown> + 0
0x007A7BDB - LabVIEW <unknown> + 0
0x00829D74 - LabVIEW <unknown> + 0
0x008546CD - LabVIEW <unknown> + 0
0x00C054E6 - LabVIEW <unknown> + 0
0x0081B9C8 - LabVIEW <unknown> + 0
0x0081EB9A - LabVIEW <unknown> + 0
0x0084D9D4 - LabVIEW <unknown> + 0
0x00854663 - LabVIEW <unknown> + 0
0x00C054E6 - LabVIEW <unknown> + 0
0x0085F7A1 - LabVIEW <unknown> + 0
0x00BBACDD - LabVIEW <unknown> + 0
0x00C06A2F - LabVIEW <unknown> + 0
0x0085AA46 - LabVIEW <unknown> + 0
0x00C06A2F - LabVIEW <unknown> + 0
I observed the title bar after making changes to the properties. I noticed that 3 out of 4 times, while changing the properties of the graphs to include the cursor, and saving after each & every step, that there were no stars appearing on the title bar to indicate "unsaved changes". Saving was also much slower than usual. I suspect, the program never got to placing the star before saving occurred. However, I am noting everything.
After creating the cursors, saving was and is normal, and the program runs well.. I have run tests without problems.
Does anyone have a clue at what causes this? Has anyone seen this before?
Thanks,
RayRHi Donovan,
I can't remember seeing this elsewhere. When I get a chance, I'll create a new (blank) vi with new graphs and will repeat the steps.
I will let you know if I see this in the new vi.
Thanks!
RayR -
I was updated my Iphone 4s from computer(ITunes).ITunes get error and update failed.(When Iphone is preparing.).And now ı can't use my IPhone.At the screen there is a USB cable and up of the screen there is ITunes' logo.PLEASE HELP!
Read what i say. Put iPhone in DFU mode. Connect with USB cable and restore.
Read:
http://www.apple.com/support/iphone/assistant/restore/ -
Error message to be thrown when multiple enteries are not entered
Hello Guys,
I have used a select-options with no intervals in the selection screen.
If the user enters one value in the range, its working.
But I want a error message to be thrown when only one entry is entered. User should enter more than one entry always.
I used low and high but its not working.
Kindly guide me.No intervals only works on the main screen. If the press the right arrow and go to the ADDL choices, they can choose the entire database table in a single range....Your test is, therefore, too simplistic. If you want to limit this on both the main and the additional choices screens, you have to implement Function Module SELECT_OPTIONS_RESTRICT in the Load-of-Program or Initialization event.
Why not select from a table into a work table where the values are IN the select-options and see how many the user obtained?
Something like this:
Select <your field> from <your table> into table <your internal table>
where <your field> IN <your select-options>.
if lines( <your internal table> ) lt 2.
<your error message>.
endif. -
Error at the time of PR creation
I am facing a Error at the time of PR creation:-
Status "Material Inactive" of material 30001668 does not allow external procurement
Message no. ME053
how to active the material.you have a material status in your material master, either at plant level or at general level.
Just remove the status.
Plant level status can be found in almost any plant view,
general level in general data view -
FIM MA Export errors. There is an error executing a web service object creation.
While checking for the permission, we have figured that the Built-In Synchronization account is being deleted by an Expiration Workflow.
FIM MA Export errors. There is an error executing a web service object creation.
While checking for the permission, we have figured that the Built-in Synchronization account was deleted by an Expiration Workflow
Is there a way to restore. Thanks.I would re-run FIM setup - I think it can re-create this account
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.
Maybe you are looking for
-
Ringtone m4r file not appearing in Tones/Ringtones
Hi I have a iPhone 4s and have created a 30sec ringtone with the Ringtone app. Having followed the instructions, I have managed to transfer the file to my PC. In Windows Explorer, I can see that the file type is .m4r and the item type is Ringtone. Ho
-
XI R2 link between CUID and the file name in the I-FRS
Hi, I would like to know how can I make the link between the file name of a webi document in the I-FRS and the CUID of this document in XI R2. In the activity universe, I made a report showing a list of webi document with their CUID. I would like to
-
HT1369 playing a movie in itunes
I am having difficulty playing two movies I added from digital download in my Itunes. I have a Windows 8 PC and unable to pay the movies on my desktop or laptop.
-
Cookies I removed. Dumping of Firefox did. On a disk through search that there was webalta - removed. All the same somewhere sits. How to get rid of it forever?
-
Cannot submit form to formscentral
I have a pdf form that I edited with Acrobat Professional 11 and uploaded to formscentral and added the submit button and created a file for distribution. The submit button only works on PC's and not the Samsung Galaxy tab 2 tablets that we need the