Error in J1IF13 Tcode Challan completion
When reversing the subcontracting challan using t.code: J1if13 getting below error message. Please help in resolving the issue
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'INR' with the following details:
Exchange rate '00', amount ' 0.03' and currency key 'INR'.
The data in the transaction currency were transferred from the calling application.
System Response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.
Hi,
Please check the following SAP OSS note
Note 1071752 - Reversing of the cenvat credit in subcontracting.
Thanks & Regards,
Similar Messages
-
Hi Friends,
When i do the "57F4 challan completion", system throws a error "Excise modvat accounts not defined for 57CM transaction and 01 excise group"
How can i fix it?
regards,
sathesHi,
1. Go to SPRO > Logistics - General > Tax on Goods Movements > India > Account Determination > Specify Excise Accounts per Excise Transaction > Here maintain following;
57CM CR Credit CLEAR CENVAT clearing account
57CM DR Debit RG23AT1 RG 23 AT1 Account
57CM DR Debit RG23BED RG 23 BED account
57CM DR Debit RG23ECS RG 23 ECS Account
57CM 01 CR Credit CLEAR CENVAT clearing account
57CM 01 DR Debit RG23AT1 RG 23 AT1 Account
57CM 01 DR Debit RG23BED RG 23 BED account
57CM 01 DR Debit RG23ECS RG 23 ECS Account
2. Go to SPRO > Logistics - General > Tax on Goods Movements > India > Account Determination > Specify G/L Accounts per Excise Transaction > Here maintain GL Accounts for ETT "57CM" with Subtransaction Type "Blank" and "01" both. -
I bought a Mac Book Pro retina display, Serial Number C02J*****2, on 8/11/2012. Unfortunately, I am unable to download updates from the App store.Whenever I tried to download updates, it shows me an error message, "we could not complete your request. there is an error in the App Store. Try again later (100). Your Apple ID has been disabled, contact iTune support". However,the problem still persists even after my password has been successfully reset. What is is the error in the app store? I really need help to resolve this issue.
Moreover,I also need help how to update to the mountain lion free of charge as my Mac pro is four(4) days old.
Sincerely
Asrat Kahsay
N.B. I'M not exactly sure the operating system is "Mac OS X v10.7.x". However, I do know for sure it's Mac OS X v10.7.4
<Edited by Host>The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
The OS X Mt Lion up-to-date program;
http://www.apple.com/osx/uptodate/ -
How to get rid of the error message we could not complete your iTunes store request?
How to get rid of the error message we could not complete your iTunes store request?
having this problem when trying to authorise an newly downloaded app in iTunesBased on the numerous posts regarding iTunes and the App Store, there appears to be an issue at Apple's end. Although Apple has not provided any indication on the cloud status page.
Do not change your settings.
Edit -
Errors with Time Machine (not completing backup, and needing to erase the ".inProgress" package)
I have in a previous discussion been talking about errors with my Time Machine backup. The errors were with a problem with Indexing a file, it fails and stops the whole backup. Each time it attemps another backup, it fills my ".inProgress" package with a (nearly) whole backup, filling my Time Machine hard drive, and thus errasing my previous good backups. The error occurs after about 95% completion.
In my last post of a similar disscussion, the problem was indexing the Preference Pane files and this caused the whole backup to fail. This was my last post there: (below in some additional info of my situation)
I did exclude the MobileMe.prefPane. And I got:
12/16/11 9:24:50.468 PM com.apple.backupd: Starting standard backup
12/16/11 9:24:50.556 PM com.apple.backupd: Backing up to: /Volumes/3 TB GoFlex Drive/Backups.backupdb
12/16/11 9:25:14.418 PM com.apple.backupd: Waiting for index to be ready (101)
12/16/11 9:27:02.366 PM com.apple.backupd: Deep event scan at path:/ reason:must scan subdirs|
12/16/11 9:27:02.366 PM com.apple.backupd: Finished scan
12/16/11 9:33:37.119 PM com.apple.backupd: Deep event scan at path:/Volumes/Mac OS Lion GM reason:must scan subdirs|
12/16/11 9:33:37.119 PM com.apple.backupd: Finished scan
12/16/11 9:36:15.650 PM com.apple.backupd: 758.92 GB required (including padding), 830.32 GB available
12/16/11 10:25:14.873 PM com.apple.backupd: Copied 22.8 GB of 630.5 GB, 782749 of 2357620 items
12/16/11 11:25:15.335 PM com.apple.backupd: Copied 86.6 GB of 630.5 GB, 1167675 of 2357620 items
12/17/11 12:25:16.227 AM com.apple.backupd: Copied 152.2 GB of 630.5 GB, 1393795 of 2357620 items
Dec 17 01:25:16 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copied 305.2 GB of 630.5 GB, 1413946 of 2357620 items
Dec 17 02:25:16 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copied 457.1 GB of 630.5 GB, 1419190 of 2357620 items
Dec 17 03:19:07 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copied 1736865 files (568.3 GB) from volume Macintosh HD.
Dec 17 03:25:16 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copied 572.1 GB of 630.5 GB, 1848939 of 2357620 items
Dec 17 03:40:33 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Indexing a file failed. Returned 200 for: /Volumes/Mac OS Lion GM/System/Library/PreferencePanes/Mouse.prefPane, /Volumes/3 TB GoFlex Drive/Backups.backupdb/Tom iMac/2011-12-14-171406.inProgress/7DB524DD-EFB9-42A6-8A21-0A2A312EDA6D/Mac OS Lion GM/System/Library/PreferencePanes/Mouse.prefPane
Dec 17 03:40:33 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Aborting backup because indexing a file failed.
Dec 17 03:40:33 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Stopping backup.
Dec 17 03:40:33 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copied 2164998 files (581.1 GB) from volume Mac OS Lion GM.
Dec 17 03:40:33 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copy stage failed with error:11
Dec 17 03:40:50 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Backup failed with error: 11
This time it was the Mouse.prefPane that caused the error. I'd like to exclude the entire PreferencePanes directory.
This was my error message this time:
I just realized this was on my small Developers partition. Perhaps there is an error with the build, OR an error with the initial restore. I'd like to perhaps exclude the entire /Volumes/Mac OS Lion GM. I expect that Time Machine is working fine with my main partition and the error happens when it's almost done with the Mac OS Lion GM partition.
The problem now is that I only have 265 GB of 3 TB available on my Time Machine HDD. If attempt another backup, it'll surely erase about 410 GB of my past saved backups. I've already lost 6 months, and I only have two months left of backups. I need to erase the ".inProgress" package again. That'll take time, and it's impossible to do from this main partition, even at root access. This ".inProgress" has a total of two (nearly) full backups; it didn't cleanup the first full backup attempt while starting the second,perhaps it would have had it finished. But I fear even if I exclude the whole "Mac OS Lion GM" partition, It'll create a third full backup before cleanup and erase ~400 GB of previous good backups. Then, I'll have a total of 4 (nearly) full backups! 3 TB is just enough without any past backups.
Maybe I'll just copy my documentations of my 'errasing the ".inProgress" package' last time (from the Mac OS Lion GM partition) and do a full restore of just that partition. Thus erasing the errors all together. If it doesn't fix the errors then this could be a bug in the build that doesn't allow Time Machine to work. I've always included this partition in Time Machine before, even with other Lion builds, so I suspect that it was an error in the initial restore. (I may be answering my own questions, and that the inital restore (of the small partition) is the problem, and I just need to re-restore the small partition)
Again, I'm going to have to erase the ".inProgress" file to regain 1.53 TB of space before proceeding.
Also, I gave myself permission to read the ".Backup.345781513.887697.log", the log that was created last night when I first started Time Machine this last time. It was interesting, but didn't show the error I could see from the console.
Right now, mds and mdworker appear to be going crazy even after I just now turned off Time Machine. I think I'll let it go for the rest of the night. Then I'll work on erasing the ".inProgress" package from the other partition boot up.
That was my entire last post. To add some information, I have two OS X partitons, both Mac OS X Lion. One is my large main partition, the other is one I don't mind testing with. I recently replaced my internal hard drive in my iMac and restored from Time Machine both partitions. This appeared to go smoothly. But I have yet to create a single successful Time Machine backup since. At first it was doing a Full Backup, which I didn't like, but now it just aborts around 95% completion. Each, time, it tries it fills the Time Machine hard drive with duplicate (nearly) full backups errasing my older good backups. I would like to erase the ".inProgress" file to save space.
My main question in this new discussion is does anyone know of a good way of erasing the ".inProgress" file? This is so I can preseerve my previous backups. ACLs and other permissions seem to make it impossible to erase from this startup partition, the one I'm running Time Machine from. Even at root level, if I give myself permission to change permissions or delete a file, it'll say Operation not Permitted instead of Permission Denied. I have been able to delete this ".inProgress" package before when booting from the other partition, but with great difficulty. I have had much help from another Member in this Support Community when it comes to solving my Time Machine problems. I think I have found the problem (indexing files in my small OS X partition), as stated in my copy& pasted post above, but I really need to delete this inProgress package first to save space before continuing!Pondini wrote:
Gator TPK wrote:
Now I'll have to fix the small partition? How's the best way to do this? There could be thousands of files that won't index fine.
See if there's anything you haven't done, that applies, in the pink box of #C3 in Time Machine - Troubleshooting
Otherwise, since most (or all?) of the indexing errors are in OSX, you might want to just reinstall it. Something may have gone wrong sometime, that damaged those files.
I reviewed #C3 in Time Machine - Troubleshooting and I have already done most of those things. I have just learned something new though:
When I included my Main OS X partition again, I got an indexing error for the first time for that partition. I might be interesting to note that the _spotlight process was running, and it's running again (the magnifying glass has a dot and it generically says "Indexing Tom's iMac"). mdworker, mds and backupd processes really are working hard, one moment they used over 500% of my CPU. It's nice to know for once quad core is good for something other than video encoding. (Now if they could just get the Finder to do more than 100.1%, only 1 thread is doing 100%, I'd like to see file size calculations 8 times quicker!)
I never got an indexing error once in the past 2 weeks for that large Mac OS X v10.7.2 main volume, and it had appeared to finish that partition backup before running into problems with my smaller test partition. Also, I had just updated the smaller test partition with a later build of Mac OS X. But It appears that the beta builds are clearly not the problem. I thought I could just restore again (from the December 4th backup) the small partition and both would be fine.
I'll finish reviewing all the suggestions on Time Machine - Troubleshooting and go from there. Hopefully, the _spotlight indexing simutaniously was the only problem. It's strange that the indexing hasn't happened since the original restore last week untill I finally got a good clean complete partial Time Machine backup. Why would the first Time Machine backup trigger indexing again?
For now, I'm going to exclude the Main Partition again, and let another good backup run. And try your suggestions. (And wait till mds, mdworker, etc. to finish!)
I have the logs of the first two sucsessful backups and the last two failed backups from the last 3 hours, if that would help.? -
I tried synching my 2nd generation ipod touch and it told me to update the software. Then it said "error 37" and could not complete updating but it has left me with an ipod that is not recognised by my pc and wont turn on or anything- just black
Error 20, 21, 34, 37: These errors typically occur when security software interferes with the restore and update process. If you are using a PC, follow this article to resolve this issue.
Above from:
http://support.apple.com/kb/TS3694
You also may have to place the iPod in recovery mode. For how see:
iPhone and iPod touch: Unable to update or restore -
everytime i try to download an app from itunes, or to 'view all' the apps listed, the error says; 'We could not complete your iTunes Store reuest. The network connection was reset' I used both my desktop and laptop both on Windows 7 Pro, & net is fine. please help. is there soemthing wrong with apple store temporarily?
The latest message is: 'We could not complete your iTunes Store request. The network connection was reset.'
In between, I got a messge about verifying my payment method. When I tried to submit the details, I kept getting a mmessage stating that my payment method was declined (my card is not near it's expiration date, and works fine).
Argh! -
Server 2008 Pinter install error OPERATION COULD NOT BE COMPLETED (error 0x900f0214)
I downloaded the HP Universal printer driver for a LaserJet 4250dn network printer to our server running SERVER 2008 SP2.
I dowloaded the zipped executable files for both the PCL5 and PCL6 drivers to the desktop and ran the EXE to unzip the files. When I tried to run the INSTALL.EXE file (as an ADMINISTRATOR) for BOTH drivers, the following occurs:
Answer YES to EULA
Select TRADITIONAL MODE (or DYNAMIC MODE - it doesn't matter - neither one works)
Click INSTALL
Immediately I get the error OPERATION COULD NOT BE COMPLETED (error 0x900f0214)
Click OK
Click FINISH
This happens with both the PCL5 & PCL6 driver installations.
I activated FILE SHARING, PRINTER SHARING, and NETWORK DISCOVERY but did not solve the problem.
I was logged in as the Domain Administrator and the Local Admin also.
Any suggestions?Hi selmore,
This is a commercial line product. For the best answer to your questions you will need to repost your question to the following links.
http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution" -
i have been exporting lightroom web galleries to my iweb site without any problem. Suddenly I get the error message "finder can't complete the operation because some data can't be read or written" - error code -36 - and the move to the sites folder on my idisk fails..... thoughts?
Try this community: MobileMe on my Mac: MobileMe: Apple Support Communities.
And you can continue to use iWeb for some time to come. The following will explain:
It's now confirmed that iWeb and iDVD have been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
On June 30, 2012 MobileMe will be shutdown. HOWEVER, iWeb will still continue to work but without the following:
Features No Longer Available Once MobileMe is Discontinued:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
◼ MobileMe Gallery
All of these features can be replaced with 3rd party options.
I found that if I published my site to a folder on my hard drive and then uploaded with a 3rd party FTP client subscriptions to slideshows and the RSS feed were broken. If I published directly from iWeb to the FPT server those two features continued to work correctly.
There's another problem and that's with iWeb's popup slideshows. Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
Click to view full size
However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone. How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
In addition the iLife suite of applications offered on disc is now a discontinued product and the remaining supported iApps will only be available thru the App Store from now on.
HOWEVER, the iLife 11 boxed version that is still currently available at the online Apple Store (Store button at the top of the page) and those copies still on the shelves of retailers will include iWeb and iDVD. -
Hi gurus,
im getting the following error in the tcode KOK3 (Collective Disp. Internal Orders , part of FI/CO package, KAUF), after applying the new support pack. Error is as follows:
System error: Error in routine T021Q_SON_LESEN SAPMKAUFORC 0
Message no. F4308
Diagnosis
An internal error has occurred.
System Response
Processing cannot be continued.
Procedure
Contact SAP to clarify whether the error can be corrected by a program adjustment or by changes in the parameters.
In order to clarify the error situation, specify the routine T021Q_SON_LESEN in which the error occurred, as well as any other parameters (if specified in the message) which could refer to a key which does not exist.
It tried to find the routine T021Q_SON_LESEN (may be due to its inactivation), but was unable to do find that.
Pl reply.
Thanx,
Naveen VishalIt was resolved due to support pack.
-
I have a MAC Pro from 2011 currently running MAC OS 10.9.5. This weekend I cloned the MAC HD drive to a new SSD drive for improved performance. The clone was completed successfully with no errors. After the clone completed I successfully restarted my system using the SSD as the boot device. I then successfully tested all of my products, including Photoshop CS6 and all of its plug-ins. I successfully tested the key features that I frequently use. Today while attempting to launch Photoshop CS6 a message is being displayed indicating that a scratch disk cannot be found. All drives are available on the system via the Finder and Disk Utility. I can access all drives including the old MAC HD which is no longer the boot device. I've even attempted to launch Photoshop from the old device yet the same error persist. Is there a way to review/edit/change Photoshop preferences if Photoshop doesn't launch? I've even restarted my system several times to see if that would resolve the issues. Does anyone have any recommendations for this issue? Have you previously address this issue?
Thank you Gregg WilliamsBoilerplate text:
Reset Preferences
http://forums.adobe.com/thread/375776
1) Close the program and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (not reversible)
or
2) Move the Folder. See:
http://www.bugge.com/Family-and-friends/Illy/illy.html
--OB -
Bridge CC will not open. Reads "Error: The operation cannot be completed"
Hello,
I just recently downloaded Creative Cloud. I am working on a Mac OSX 10.9.5 and I downloaded Creative Cloud to use both Photoshop and Bridge. Photoshop opens and is working however, Bridge opens for 1 second and then give me the message, "Error: The operation cannot be completed", and then shuts off.
I uninstalled the program and re-installed but still the same problem. Any suggestions would be appreciated.Right-click on the file and choose *Get Info*. At the bottom of the window you will see *Sharing & Permissions*. Click on the lock and enter you password. If your name is there change the permission to Read & Write. If not, add your name to the list and make sure it's set to Read & Write. You should now have access.
-
When I try to purchase Mountain Lion i get an error message: "We could not complete your purchase. The product distribution file could not be verified. It may be damaged or was not signed."
I can purchase other apps, why not Mountain Lion. I get the same message on my wife's IMAC.The only thing that worked for me was to boot in safe mode.
Power down. Then press power button and hold 'shift' key until grey screen with progress bar appears... Once booted and logged in just open safari and browse to applestore.
No trouble at all once I did this.
Hope it helps. -
Hi, my iTunes application is not connecting to the iTunes store. It is coming up with the following error message "we could not complete your itune store request. An unknown error occured (11222)" Can you please assist?
Hi Laura-Wedders,
Thanks for visiting Apple Support Communities.
On August 7th, some users may have been unable to make purchases from the App Store, iTunes Store, Mac App Store, or iBookstore. Apple worked quickly to resolve these issues, however you may have experienced them.
To check the current status of these systems please see:
Apple - Support - System Status
http://www.apple.com/support/systemstatus/
If you are still experiencing issues, you may want to troubleshoot with the following articles:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
All the best,
Jeremy -
Error with s_alr_87013019 tcode
Hi gurus!
I have an error with s_alr_87013019 tcode.
i have a purchase document that its pending and it must be showed on comitment column of s_alr_87013019.
But the comitment column is empty and all the import is in the real column wich is no correct.
Thanks.Hi!
I have discovered that i dont have set the commint management in the type of orden in tcode KOT2.
I have set the flag but i have no lines in commitment for this orden in s_alr_87013019 report.
How can i solve this?
If i execute rkanbu01 whart consecuences can i have?
Thanks
Maybe you are looking for
-
Digital photo professional - export JPG from RAW
Hello! i have a problem with program Digital photo professional, when i want export images from RAW format to JPG. The problem is, that quality of image is much more worse, then in RAW format in DPP. JPG looks blurred and fuzzy. IMAGE LINK: Please ch
-
Hi All, I used BI Publisher conversion utility to convert oracle report 6i to BI Publisher. In the following XML template file i got few quries. I need a hint how can i migrate this report to APEX. Thanks. Ribhi <?xml version="1.0" encoding="UTF-8" ?
-
Re: Satellite A135-S7403 does not pass POST after BIOS update
Hello I have A135-S7403, i know that it's old but i worked good until i install a new Bios version (1.90 for Satellite A130 (PSAD0U/PSAD3U) from the official Toshiba site(here: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=D
-
Can I Change Album Song Order Without Making a Playlist?
Some albums get reissued in a different order than I am used to. To reorder the songs, I have been making a playlist and dragging the songs over in the order I want them. But--this feels like many extra steps. Can you just import the cd, and then reo
-
Oracle 10g Lite Packaging Wizard
I need to publish an application with WTGPACK.exe packing applocation. The document that comes with Oracle 10g Lite is doesn't match the GUI. Does anyone have instructions on how to publish an application using Oracle 10g Lite?