Error in J2IUN - FI posting perid Message no. 8I280

Hi,
Our client had not done "J2IUN" (utilization) for last 8 month. Now we are doing it one by one per month. But when i try to post J2IUN transaction, system gives following message;
Error in FI posting 20100721
Message no. 8I280
This is because MM period is closed so we applied the SAP note 487381 and reopen the MM period with the help of Tcode MMPI. We checked Tcode OMSY to check whether period has opened or not. Old period is opened now but still system is giving same error.
Kindly advice if anyone have gone through this error.
Regards,
Nisha

Guys,
Can you please clear one thing?
Is it necessary that the posting be done in the relevant period?
I tried doing the utilization for a period 8 months back on todays date. The system readily accepted it and posted the doc.
Now my issue is, the Excise people have done JV's for the utilisation till date.
1. How do we reconcile the amounts?
2. If we do the utilization this way, what will be impact on my system?
Please suggest.
Rahul

Similar Messages

Error while trying to post inbound idoc of message type COND_A

Hi,
I am getting error while trying to post inbound idoc of message type COND_A.
If I left Usage & Condition field of segment E1KOMG then 'Table not available' idoc message is coming
and if providing value in above fields then dump is coming.
How to solve ?
Plz do reply
Thanks
Mohit

I do not see any reason why you would need to use COND_A04 if COND_A01 is working.
What if you could get COND_A04 to post and you would face the same result as in COND_A01?
If SAP does not check wrong values, then you have to do it yourself, or you report an incident at SAP (after you have searched for OSS notes that may have fixed this error already)
For example OSS Note 1169998 - IDoc: KONP-LIFNR values not checked
fixed a situation where the vendor number was not validated.

Post Goods Issue - error : Class type does not exist - Message no. VK662

Hi,
I am trying to do Post Goods Issue and getting this error: Class type does not exist
When double click on the error, it shows it is a message no vk662.
Any help to resolve it is appreciated. Thanks in advance.
-Sri

Sri
There is a problem in batch determination.
The batch you assigned to the material does not have a class or if it has a class, that class does not exist.
Display the batch from the delivery item using MSC3N and go into the Classification tab. You should have a class of class type 22. See if that class exists in CL03 and its status in basic data tab. Work on these lines and revert.
Hope this helps.

Var xhr = new XMLHttpRequest(); xhr.open("POST", url,false); working in chrome but not in mozilla 5.0 i am get error "[Exception... " no message " nsresult"

while uploading a file i am getting below error
[Exception... "<no message>" nsresult: "0x805e0006 (<unknown>)" location: "JS frame :<TOP_LEVEL> :: line 80" data: no]
but the same works in chrome
here is the java script code
var xhr = new XMLHttpRequest();
xhr.open("POST", url,false);

HI johibkhan.
I think you have to update Firefox the call you are using needs 12 or higher:
"Gecko 12.0 (Firefox 12.0 / Thunderbird 12.0 / SeaMonkey 2.9) and later support using XMLHttpRequest to read from data: URLs."
[https://developer.mozilla.org/en-US/docs/Web/API/XMLHttpRequest]
But also keep in mind we have developers dedicated to answering questions like this in the Firefox section of stackoverflow.com as well :-) You might get a faster/more accurate response.

There was an error after each try of posting new message. Sorry for multi copies.

There was an error after each try of posting new message. Sorry for multi copies of question about put blob to OS

There was an error after each try of posting new message. Sorry for multi copies of question about put blob to OS

There was an error after each try of posting new message. Sory for multi copies.

There was an error after each try of posting new message. Sory for multi copies of question about InterMedia configuration.

There was an error after each try of posting new message. Sory for multi copies of question about InterMedia configuration.

Error, posting the message

Why do I always get: 'Error, posting the message. Please make sure all required fields are entered' when I had not been given the option in the first place.
You can tell I am finding this interface frustrating. Why is Apple using software that they cannot (or will not) fix and which consistently performs worse than many other services?
Its one good point (for me) is the spelling check.
Xserve Other OS

It looks like the control data for the child segment is not getting populated. you have to find the code which populated the control data and see if it is doing what it should.

Error posting new messages in Discussion Forum Portlet.

I've installed the Discussion Forum Portlet from the Integration Tools version 9.0.4.0. I'm trying to post a message but I'm getting the following error:
'Unable to perform the operation: Row was not found using request parameter: 000100000004313530350000003E000000F95C4B5E59.' I've deleted the posting and reposted but the same error keeps coming up.
Any ideas?
Thanks,
Denise

Contents of application.log:
11/26/03 9:36 AM Started
11/26/03 9:36 AM Started
11/26/03 9:36 AM forum: oracle.jsp.runtimev2.JspServlet: init
11/26/03 9:36 AM forum: 9.0.2.2 Started
11/26/03 9:36 AM forum: 9.0.2.2 Stopped
11/26/03 9:36 AM Started
11/26/03 9:40 AM Started
11/26/03 9:58 AM forum: oracle.jsp.runtimev2.JspServlet: init
11/26/03 9:58 AM forum: 9.0.2.2 Started
11/26/03 9:58 AM forum: oracle.webdb.provider.v2.adapter.SOAPServlet: init
11/26/03 9:59 AM forum: ServletLogger - Logging level: 4
11/26/03 9:59 AM forum: [id=(null), instance=(null)] CONFIGURATION: Invalid or null value for property - executionWarningTimeout = null - setting to default value of 20 seconds
11/26/03 10:08 AM forum: [id=1069859279192ApplicationServerThread-6, instance=31122_DISCUSSIONFORUM_PORTLET_3933761] CONFIGURATION: Default container renderer not specified
11/26/03 10:08 AM forum: [id=1069859279192ApplicationServerThread-6, instance=31122_DISCUSSIONFORUM_PORTLET_3933761] CONFIGURATION: defaulting container renderer to DefaultContainerRenderer
11/26/03 10:08 AM forum: [instance=(null), id=(null)] WARNING: Request has exceeded its warning timeout Time[elapsed=20069ms. Warning timeout=20000ms.] Request[id=1069859279192ApplicationServerThread-6 providerId=3933761 portletId=1 portletName=DiscussionForum_Portlet portletInstance=31122_DISCUSSIONFORUM_PORTLET_3933761 user=PORTAL] Thread[ name=ApplicationServerThread-9 priority=5 alive=true interrupted=false groupName=main]
11/26/03 10:45 AM forum: [id=1069861494237ApplicationServerThread-12, instance=31124_DISCUSSIONFORUM_PORTLET_3933761] WARNING: EditInfo: OID server Port not an integer:
12/8/03 4:47 PM forum: 9.0.2.2 Stopped
12/8/03 4:47 PM Stopped (Shutdown executed by jazn.com/admin from 127.0.0.1 (127.0.0.1))
12/8/03 4:52 PM Started
12/9/03 1:38 PM forum: oracle.jsp.runtimev2.JspServlet: init
12/9/03 1:38 PM forum: 9.0.2.2 Started
12/9/03 1:38 PM forum: oracle.webdb.provider.v2.adapter.SOAPServlet: init
12/9/03 1:38 PM forum: ServletLogger - Logging level: 4
12/9/03 1:38 PM forum: [id=(null), instance=(null)] CONFIGURATION: Invalid or null value for property - executionWarningTimeout = null - setting to default value of 20 seconds
12/9/03 1:38 PM forum: [id=1070995094324ApplicationServerThread-11, instance=31123_DISCUSSIONFORUM_PORTLET_3933761] CONFIGURATION: Default container renderer not specified
12/9/03 1:38 PM forum: [id=1070995094324ApplicationServerThread-11, instance=31123_DISCUSSIONFORUM_PORTLET_3933761] CONFIGURATION: defaulting container renderer to DefaultContainerRenderer
12/9/03 1:38 PM forum: [id=1070995119760ApplicationServerThread-11, instance=31123_DISCUSSIONFORUM_PORTLET_3933761] WARNING: EditInfo: OID server Port not an integer:
12/9/03 1:39 PM forum: [id=1070995151896ApplicationServerThread-11, instance=31123_DISCUSSIONFORUM_PORTLET_3933761] WARNING: EditInfo: OID server Port not an integer:
12/9/03 1:39 PM forum: [id=1070995161009ApplicationServerThread-8, instance=31123_DISCUSSIONFORUM_PORTLET_3933761] WARNING: EditInfo: OID server Port not an integer:
12/11/03 2:19 PM Started
12/12/03 3:18 PM forum: oracle.jsp.runtimev2.JspServlet: init
12/12/03 3:18 PM forum: 9.0.2.2 Started
12/12/03 3:18 PM forum: oracle.webdb.provider.v2.adapter.SOAPServlet: init
12/12/03 3:18 PM forum: ServletLogger - Logging level: 4
12/12/03 3:18 PM forum: [id=(null), instance=(null)] CONFIGURATION: Invalid or null value for property - executionWarningTimeout = null - setting to default value of 20 seconds
12/12/03 3:18 PM forum: [id=1071260317481ApplicationServerThread-9, instance=31123_DISCUSSIONFORUM_PORTLET_3933761] CONFIGURATION: Default container renderer not specified
12/12/03 3:18 PM forum: [id=1071260317481ApplicationServerThread-9, instance=31123_DISCUSSIONFORUM_PORTLET_3933761] CONFIGURATION: defaulting container renderer to DefaultContainerRenderer

ERROR when Trying to create support message in satellite system

Hi
I have a wired problem.
My user's are opening support message in the solman through the ECC system.
But when a user is open a support message with the component FI he get the following message:
"Error in Local Message System: Component FI does not exist: Check your entry Message was Not Created"
I'm working with ECC6 and SOLAMN 4.
Why I can't generate support message with the component "FI" ?
Please advice
Best regards
Lior Grinberg

Hi
SAP Component is FIN Financials not FI that is why I thnk u r getting an error.
Normal process is
Whenever your user will post any message from any Transactions of FI module in ECC they goto help->create support message
This will automatically fill the SAP Component
Secondly if they are posting from initial logon screen they can choose the value by pressing F4 in SAP component field
Hope it solves ur problem
Regards
Prakhar

Getting error while preparing to send sharing message

I have seen many people post up about this same error, however I am going to share some details in the troubleshooting I have performed.
Environment: Exchange 2013. Cloud hosted. Internet connectivity using any number of clients. Mostly OWA, but a few Outlook 2010 and Outlook 2013.
1. User A with Outlook 2010 or Outlook 2013 right clicks on the calendar and clicks "Share" -> "Share Calendar". They look up User B in the Global Address List and click "Send." An error window pop-up states "Error while
preparing to send sharing message." User A is able to click on Calendar Permissions and add User B to the correct permissions. User A with OWA is able to right click on the calendar and click "Share Calendar" and it will send the message, no
errors.
2. User B with Outlook 2010 or Outlook 2013 on the same computer that User A was trying to do this from right clicks on the calendar and clicks "Share" -> "Share Calendar". They look up User A in the Global Address List and click "Send".
No errors and the message goes through fine. It works correctly with OWA as well.
I have seen people put up "autodiscover" and "permissions" or other things. This is obviously not a permission issue because the same thing that can be accomplished in OWA can't be accomplished in Outlook. It isn't an autodiscover issue
because the same thing that one person can accomplish on a computer/Outlook, another cannot. This is the same error that I have seen since the time of Outlook 2007 and have yet to see a valid solution.
Thanks,
Don

Hi Don,
Hope it is the solution:
You can't share your calendar in Outlook 2007
http://support.microsoft.com/kb/2836889
Thanks
Mavis
Mavis Huang
TechNet Community Support

HP Officejet Pro 8500 A910 Scan to email failure Error Server Failure Try again Later message

HP Officejet Pro 8500 A910n ( CM758A ) Scan to email failure Error Server Failure Try again Later message
Ran HP Print & Scan Doctor - finds no problems. When sending a scanned document to the user email it has " Error Server Failure Try again Later " message . Can run test to the scanner without any errors. Tried to reset the printer - same result.
Any help would be much apreciated. AHuber

Hello there! Welcome to the forums @TheShadow42 ,
I read about the scan to email issue you are having and I will gladly try to help you! I would suggest checking your scan to email settings from the EWS, and perhaps run the scan to email wizard again. You should also see a scan and test option in the setup.
Here is a link to the User Manual, that has quite a bit of great info. Check out page 62 for the scan to email information.
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Travel Expense - Posting run error - Error during creation of posting run

Hi Guru's,
Look forward for your insights. Here you go with my question.
We are implementing Expense Mgt with Portal with out scope for payroll in SAP. I have set up Expense type, WT, Symbolic A/c to G/L Accounts. Im performing Unit testing currently.
Created Expense trip in ESS, from R/3 tcode PRAP, have approved trip, and settled through Tcode - PREC.
When I try to create posting run under transfer to accounting, I get following error
Error during creation of posting run number (->PR1
Message no. 56840
I'm not sure why this error was popping up. Appreciate your suggestion.
Regards
Praveen.N

Hi,
Since you are trying to make payment through FI, you need to maintain ur employee as Vendor. You can do it through PRAA.
So while creating posting run for this trip, it checks if the respective Vendor for this employee is maintained or not.
Pls maintain it as vendor and see if the errors are still coming.
Rakesh

PARSE_APPLICATION_DATA Error during XML = ABAP conversion: Response Message; CX_ST_DESERIALIZATION_ERROR in /1SAI/SAS0446CC11CC6EC1AD4789 Line 24 An error occurred when deserializing in the simple transformation program /1SAI/SAS0446CC11CC6EC1AD4789

Hi Experts ,
i have a scenario proxy to soap where i am getting error while getting the response .
we are sending the request successfully and getting response .some times we are getting in proxy level error below
PARSE_APPLICATION_DATA Error during XML => ABAP conversion: Response Message; CX_ST_DESERIALIZATION_ERROR in /1SAI/SAS0446CC11CC6EC1AD4789 Line 24 An error occurred when deserializing in the simple transformation program /1SAI/SAS0446CC11CC6EC1AD4789 (Cha
Please help us to fix this bug in proxy response.
Regards
Ravi

Hello Ravinder,
Can you please post the complete stack trace, it seems to be some fields are getting truncated i,e data sent from the program to the proxy object might be violating some length restrictions.
Please check your message interface field lengths and what is being passed to the proxy.
Regards,
Ravi.

Error Occurred During the Posting - Cash Document Posting (DPM)

Dear Experts,
while trying to Post the Cash Documents from DPM session we got the below message :
we have tried to check the application log by pressing on the button in the screen "application log"
but we get nothing just the same message that appears on the screen we tried to repost to get the details of the error but we get the same message .
So where to find more details about the errors cause my problem that i cant get more info about the error to resolve it.
any help is appreciated , Thanks In advance
Regards.
Ahmed Salam.
Basis Team.

HI,
Since, the reason is unknown, I suggest to check if you have implemented below SAP notes.
1346373 - Cash desk redesign improving cashdesk robustness
1364422 - Missing link to clearing document in DBM cash journal
Regards
Ganesh

[SOLVED] Alpine - Error sending: No default posting command

Hi, I have installed the Alpine mail client yesterday, and it all works nicely, except I can't send mail. Everytime I try I get this message:
Error sending: No default posting command
I have tried googling around, and from what I understand Alpine uses sendmail by default, but I haven't got it installed, nor I can find it in the repos. Is there any way I can change this? And what can I use to send mail?
Thanks.
Last edited by finferflu (2007-12-26 16:02:13)

I haven't dug it enough yet, and I'm not sure that this is possible, even though Alpine is very customisable as far as I can see.
I'll let you know if I find anything

Error in J2IUN - FI posting perid Message no. 8I280

Similar Messages

Maybe you are looking for