Error in J2IUN - Monthly Utilization

Dear Experts
I'm running monthly utilization using T code J2IUN. Here the PLA account is not populating for BED duty. but all the carry forward and account balances are available.
Kindly Guide me through this problem.
Regards
JK

Just a brief description:
J2IUN for the month of March(FY-2009). following points are checked in my system.
1. PLA account Balances are posted using T.code J1IH through TR6 Challan for March Month(FY-2009).
2. PLA Balances Extracted in J2I5 and print in J2I6(FY-2009).
3. PLA Balances are updated in Table j_1ipart2 automatically when we do 1 and 2 points.
These above things has been done, but PLA account Balances (Even PLA accounts description) is not displaying in Utilization.
Note: Up to Feb Month Utilization done properly even PLA accounts also displaying so we utilized.

Similar Messages

  • Error in Excise Monthly utilization (J2iUN)

    Dear All,
    While executing T-code J2iUN (monthly utilization)  system gives the error message :-
    Customization for excise group S1 is missing in table Excise group
    Message no. 8I303
    Diagnosis
    The customization details have not been maintained for this company
    Procedure
    Please use the localization IMG or Global settings
    to maintain the company settings
    Kindly provide solution.
    Best Regards,
    Satheesh K

    Hello ,
    J2IUN input parameter's are wrong. Check mentioned customization for excise group and Plant settings.
    SPRO > Logistics General > Tax on goods movements > India > Basic settings > Maintain excise group where you can able to check plant vs excise group assignment.
    Regards
    Mani Kumar

  • Negative Balance in J2IUn - Monthly utilization

    Dear SDNs,
    I am running Transaction J2IUn for April 2009 (Monthly Utilization).
    I am getting Three Account Names
    1. RG23ABED
    2. RG23CBED
    3. PLABED
    Here I am getting Negative value in Available Balance and Rem Balance for RG23ABED and PLABED.
    Any inputs..?
    Thanks in Advance...
    Regards,
    HP

    Hi,
    Check from MM end, whether the amounts are updated while excise capture and post is done.
    Regards,
    Sai

  • Monthly Utilization

    Hi Gurus
    During monthly utilization following error occurs. Also in J2I6 (RG23A Part II), u2018Opening Balanceu2019 amount differs than actual balances since Nov.2011 as shown below:
    Oct.2011  Cl. Bal.       
    75550535     1542515     768840.8     23314928
    Nov. 2011  Op. Bal.
    9073764     185925.1     90715.47     1937327
    In T CODE J2IUN Monthly Utilization
    for an excice invoice i get a dump for ABAP run time error.
    Kindly suggest

    the issue was due to negative balance.Cenvat G/L balances to be carry forwarded.Issue resolved.

  • Monthly utilization error in J2iun

    Dear SAP Guru's
    Please help me I am unable to do the monthly utilization by J2iun for local excise invoice.
    1) The series is maintained for no immediate utilization( check is un ticked) for immediate utilization for local excise.
    2) for Export excise invoice it is working correctly as immediate utilization check is enabled.
    3) For local excise utilization even though the settings are there for monthly or fortnightly utilization even then it is utilizing immediately in J1iin
    Please help to resolve this.
    Regards
    Umesh

    Just a brief description:
    J2IUN for the month of March(FY-2009). following points are checked in my system.
    1. PLA account Balances are posted using T.code J1IH through TR6 Challan for March Month(FY-2009).
    2. PLA Balances Extracted in J2I5 and print in J2I6(FY-2009).
    3. PLA Balances are updated in Table j_1ipart2 automatically when we do 1 and 2 points.
    These above things has been done, but PLA account Balances (Even PLA accounts description) is not displaying in Utilization.
    Note: Up to Feb Month Utilization done properly even PLA accounts also displaying so we utilized.

  • Monthly utilization-J2IUN

    Hi Experts,
    While i am trying to post the monthly utilization in J2IUN ,i am getting below error.
    FI/CO interface: Update call without successful check
    Error message NO-RW100.
    Please help me on it.
    Regards,
    Sumeya offrin

    Dear,
    This is one of the very common issue, from error message you can not judge that what is the error, please follow below process to know the exact root cause of error:
    1. In J2IUN enter all details and switch on the debugging
    2. Execute the screen, it will open in Debugging mode
    3. Put Break point at Function Module "Messages_COunt"
    4. Press F8, system will stop at one point, now press F6 and search for field XMSEG, this is the internal table which stores the error message, for the first time this will be blank, you need to press F6 till the time your cursor reaches second time, once it reaches the second time, you will see some value, this will be exact error message
    The possibilities are
    Business Area error, Profit Center Error, Profit Center not activated etc.
    Please try and let me know if you face any issues.
    Br,Vivek

  • Monthly Utilization J2IUN with Service Tax

    Hi Mentors
    I have one query. While doing the monthly utilization with service tax option my balance not tallying with my utilization amount & my ledger account.
    Before I did all the utilization with cenvat clearing a/c. why it is not matching my balance
    thanks in advance.
    Regards
    Laxman

    Sandeep
    My payables like BED & CESS i want to adjust against the service tax. so i no need to maintain balance in service tax account.
    if i adjust amount against service tax system not allowing
    Laxman

  • Error during J2IUN posting:Error in FI posting

    Hello all,
    I am getting an error " Error in FI posting 20081203" in the J2IUN tcode. I tried to post monthly utilization for the month of November with posting date 30.11.2008. The periods 8 and 9 ae open.
    Please suggest what needs to be done to correct the same.
    Sumeet

    Dear sumeet,
    I think this is not the error of posting period.Please check all the input you are giving is correct one,
    Please check the G/L balances against which you are utilizing via FBL3N , it should not minus in any case.whether available amount is sufficient for utilization for all type of taxes?
    Also check the total entry by simulating the entry- debit / credit is zero?
    Regards,
    Parag

  • J1iin is utilizing immediatly required is monthly utilization

    Dear SAP Guru's
    Please help me I am unable to do the monthly utilization by J2iun for local excise invoice.
    1) The series is maintained for no immediate utilization( check is un ticked) for immediate utilization for local excise.
    2) for Export excise invoice it is working correctly as immediate utilization check is enabled.
    3) For local excise utilization even though the settings are there for monthly or fortnightly utilization even then it is utilizing immediately in J1iin
    Please help to resolve this.
    Regards
    Umesh

    1.Utilization Problem:
    J2IU has to be used for monthly utilization . You will have to  utilize Excise duty liability Excise duty wise by providing all the dispatch plants in the selection screen.
    In the second screen of the j2i5 you will get all the credit balances accumulated in the respective excise group, utilize all the payable duty from accumulated credit shown in the screen.
    Part2 entry will be created once you simulate & save.
    2. Import material return:
    If you material is returned to vendor then no need to reverse the credit.
    Raise an OTHR invoice through J1IS providing the correct duty break-up.
    Regards,
    Akhileshwar K

  • Very urgent-Monthly utilization problem

    Hi All
    I m having problem when i am trying to do monthly utilization
    When i am executing T-Code J2IUN ,I have selected the plant and excise gruop
    After that it is displaying
    RG23ABED
    RG23CBED
    RG23ASED
    RG23CSED
    Correctly that is it is showing all positive amount
    But PLABED it is showing Negative amount
    We have checked with the abaper ,he told us that it is taking current fiscal year amount and previous yr i.e 2007-2008 it is not taking
    What can be the possible solution
    Awaiting for quick response
    Point will be duly awarded for the answers
    regds
    sahilesh

    Dear Shailesh,
    The Balance which is shown in J2IUN transaction is for all the business areas for a particular companycode. When you are doing a utilization for a particular excise group & for a particular period (say Today) then system will show the PLA balance for all the business area in J2IUN for the fiscal year 2008 if your fiscal year variant is fro April-March.  So check the G/L balances of the duties which are shown correctly as well as the PLA G/L balance & also check your PLA G/L account assignment in
    SPRO/Logistics general/Tax on goods movements/Account determination
    Thanks & Regards,
    SAP FC

  • TS3988 I get a "Connection Error - iCloud encountered an error while trying to connect to the server" message; I have been getting this error message for months, on any device I try to login with.

    I get a "Connection Error - iCloud encountered an error while trying to connect to the server" message; I have been getting this error message for months, on any device I try to login with.

    Hi
    I am sorry can't help you because I have same problem when login to icloude.com and try insert to Contacts!
    Many times happen.
    what is issues ?

  • Error in J2IUN - FI posting perid  Message no. 8I280

    Hi,
    Our client had not done "J2IUN" (utilization) for last 8 month. Now we are doing it one by one per month. But when i try to post J2IUN transaction, system gives following message;
    Error in FI posting 20100721
    Message no. 8I280
    This is because MM period is closed so we applied the SAP note 487381 and reopen the MM period with the help of Tcode MMPI. We checked Tcode OMSY to check whether period has opened or not. Old period is opened now but still system is giving same error.
    Kindly advice if anyone have gone through this error.
    Regards,
    Nisha

    Guys,
    Can you please clear one thing?
    Is it necessary that  the posting be done in the relevant period?
    I tried doing  the utilization for a period 8 months back on todays date. The system readily accepted it and posted the doc.
    Now my issue is, the Excise people have done JV's for the utilisation till date.
    1. How do we reconcile the amounts?
    2. If we do the utilization this way, what will be impact on my system?
    Please suggest.
    Rahul

  • Posting error..mid month cost cenre chenged

    Hi All
    One employee transferred (18.04.2011) mid month. So i have changed position (cost centre also), then employee have one cost centre in 01.04.2011 to 17.04.2011 and from 18.04.2011 onwards in another cost centre. While doing posting (PC00_M99_CIPE) system is showing below error.
    u201CBalancing field "Profit Centre" in line item 009 not filledu201D Message no. GLT2201u201D
    Here, line item 009 is /559(bank transfer wage type)
    Thanks and Regards
    Madhu Bijjala

    Hello Madhu,
    Please check with the Finance team.  Some of the settins related to cost center and profit center needs to be changed.
    Check the below thread for your reference.
    Balancing field "Profit Center" in line item 001 not filled
    GLT2201 - Balancing field profit center in line item 001 not filled
    Hope this helps.
    Best Regards.
    Karan.

  • Runtime error in J2IUN -  "DYNPRO_FIELD_CONVERSION" / "Conversion Error*"

    Hi All,
    I am facing run time error problem during Transaction J2IUN "DYNPRO_FIELD_CONVERSION" / "Conversion Error"
    Error analysis:
    The program has been interrupted and cannot resume.
    Program "J_1IRUTZN" attempted to display fields on screen 9000.
    An error occurred during the conversion of this data.
    There was a conversion error in the output of fields to the screen.
    The formats of the ABAP output field and the screen field may not match.
    Some field types require more space on the screen than in the ABAP
    program. For example, a date output field on the screen requires two
    more characters than the corresponding field in the ABAP program. When
    the date is displayed on the screen, an error occurs resulting in this
    error message.
    Screen name.............. "J_1IRUTZN"
    Screen number............ 9000
    Screen field............. "UTIL1-REM_BAL"
    Error text............... "FX015: Sign lost."
    Other data:
    Kindly guide me to resolve the issue.
    Regards,
    P.S.Chitra

    Hi,
    Here comes the solution...
    Please implemet the SAP note 1252418...
    Looking very much relavent to your problem...
    Regs,
    Lokesh.

  • Monthly utilization of Cenvat problem

    Hi ALL
    While doing utilization for for the month of JAN the key user has maintained todays date i.e.04.05.2008.and done the utilization.i.eJ2iun.
    As it has posted in todays date it has done utilization till today.
    Now I Reversed the document and want to do the same in 01.01.2008 to 31.01.2008
    how we can do this?Plz guide.Consider this is very urgent Pls its very urgent.

    Hi,
    We are also facing same problem 2 weeks back,I found out that not sufficient Balance in RG23A BED account that's why system took Corresponding PLA account,This message is also confirmed from SAP also.
    And aslo maintain Proper Debit and Credit entry of MRDY t.type.
    Raghu

Maybe you are looking for