Error in Jdeveloper by opening .jws file

Hi
I am trying to open .jws(Application file ) with Jdeveloper,it is giving me error it opens a window that display error message-
The program may be unstable which may results in Data loss.Decide how you want to proceed and click OK
Options-
Save all files and exit
continue
Exit without saving
If i opened individual .jpr (Project file) it is working fine without causing errors.
Please help
Snehal
Edited by: 947450 on Oct 28, 2012 10:32 PM

Before doing something drastic as renaming the systemxx.xx.x.x folder let's try to solve the problem in another way.
When you get the error dialog you normally should see a detail button which should give you access to the stack trace causing the error. Sometimes looking at the stack trace gives a hint how to solve the problem (e.g. there is a not closed xml tag).
If you don't see anything familiar you can try to select the 'continue' option and click ok to resume loading the jsw file. Most of the time jdev is intelligent enough to correct the error and you can work after the work space has loaded successfully.
Timo

Similar Messages

I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file

I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file me be open in another application."Please help I really need to get this file open.

Since you've shown us the folder contents it's a good bet it isn't in use (no lock file). And it doesn't look like the file is mis-named as there doesn't seem to be anything else there that would be the .indd file (but just in case, open it in TextEdit and paste the first few lines here so we can see what the file header says), so the most likely case is the file is damaged. Is that on a removable device of some sort?
You can try the tool at Repair corrupt InDesign Adobe files on Mac OS X or send me a link to the file by private message and I'll try the recovery tool I have for Windows.

Configuration assistant error OPW-000001 cannot open password file

Installing on RH9. The install gives a fail message on the configuration assistant portion. When I run dbca from the command line I get the error
OPW-000001 cannot open password file
The password file for the new database exists with the the permissions, owner and group:
-rwSr----- oracle oinstall filename (highlighted in red)
I have tried running dbca as root and oracle but get the same error.

Does the user have appropriate operating system privileges?

Getting an error message trying to open a file, "Missing required parameter 'from' for method "open'. What do I do?

Getting an error message trying to open a file, "Missing required parameter 'from' for method "open'. I've tried opening in CC and CS5. What do I do? Can the file be salvaged?

Try opening as a copy, and/or copying the file to a new location and try opening that.

Currently using Flash Pro CS5, getting error when trying to open CS4 file. Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version.

Currently using Flash Pro CS5, getting error when trying to open CS4 file. Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version. Has there been a fix or patch to this issue or do I have to convert back to CS4 to open the file?

Having the same problem in CS6. I can tell you that converting back to CS4 will NOT solve the problem. It seems when support for backward compatibility is discontinued, there's just no way to get
any help at all? Absolute failure to provide any user support so far...

HP DESKJET INK ADVANT K209a-z, extraction fialed : error message "0 cannot open output file"

D/Sir,
I have extracted hp deskjet int advant k209a-z driver using 7zip.
I was getting the error "Extraction Failed: Cannot Open Output File".
On extract with 7-zip, I get the message:
0 can not open output file "<folders>/Autorun.inf"
I am on business laptop with Windows XP but tried with Admininstrator login as well.
Please help me. How to extract it sucessfully?

That type of error message may be indicative of a bad file. Did you download it on the web? If so, try again, but do not use a download manager or program to do it, those can occasionally cause problems with compressed files.
It could be possible, also, that some sort of security program on your laptop is blocking the extraction process. If that is the case you should be able to find some error in the Windows event viewer through the control panel.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Output Designer 5.7 Errors - Error 1804 Unable to open configuration file

Hi...Receiving error messages on accessing newly installed Output Designer 5.7. Installed on new Win7 laptop.
Error # 5903 - You must select a Printer before saving.
Error # 1804 - Unable to open configuration file "....\Config\PDF.ICF"
The last error, Error # 1804, closes out the application. File does not exist within the path. Tried uninstalling and reinstalling with the same result.
Any help would be greatly appreciated!
Thanks,
Elena.

Hi Elena
This is most likely caused by missing admin rights on Win 7. I have seen this problem within my company.
When installing Adobe Output Designer it will be placed in %ProgramFiles% which is your C:\Program Files folder.
In subfolder C:\Program Files\Adobe\Output Designer 5.7\Config there are many configuration files that controls your printer drivers (Presentment targets). Dependent on what user type you are in Win 7 you might not have write access to files in this folder. When you cannot write to this folder you cannot make changes to your printer drivers or install new ones and you are pretty much stuck.
Solution: Create folder C:\MyPrograms and install Adobe Output Designer here.
Ståle

LOAD ALIAS ERROR - 1002000 - Unable to Open Ascii File

LOAD ALIAS ERROR - 1002000 - Unable to Open Ascii File
Edited by: sj0609 on Nov 23, 2011 11:18 AM

Just off the top of my head, have you tried doubling up the backslashes?
I have had problems getting an ASO alternate alias table loaded from MaxL at all (back in v9) but I didn't get the same error you do.

Just started getting error messages: "error in trying to open this file, access denied"

Can anyone help? Just started to get error messages: "error in trying to open this file, access denied" This ha-ppens when trying to open PDF attachemnts to e-mail, something we have been doing for years. No new softare had been loaded recently so I can't explain what is happening. Anyone with any insight in to this situation?

What OS and Adobe Reader version are you using. Also what e-mail application are you using.

Error -1712, can't open ibooks file

HI,
I've been working on htis file for months. I get the error code -1712 andcan't open the file. Any suggestions?
Many thanks!
Elaine

Maximum for upload to the store is 2.0 GB.
See Optimizing performance in your iBooks Author books
If you have issues, use iBA's 'File/Revert to...' menu and see if you have something recent you can use, or as always, go to your main backup and pull from there.

Error message in .docx : 'Open XML file cannot be opened because there are problems with the contents. Details Unspecific error Location: 2'

I have put a lot of work into a docx document on my Mac, but now can't open it as it gives the error message: 'the Open XML file cannot be opened because there are problems with the contents. Details, Unspecific
error, Location: 2'
When opening the original file the message said: 'this file contains word 2007 for Windows equations' etc. but I managed to track changes fine, and saved, closed and re-opened it numerous times without problem. Some graphs seemed moved, and various formulas
were illegible, but no other weirdness was observed.
I have microsoft 2008 installed on my Mac OS X version 10.6.8.
I've tried to fix it using various solutions suggested here, but am afraid am too IT illiterate to have had any luck, please help I'm new to all this!
I've uploaded it to https://www.dropbox.com/s/hkw9k6lyihzoxpc/SittwayPauktawSQUEACREPORT_KD%2BCH.docx

Hi,
This issue is related strictly to oMath tags and occurs when a graphical object or text box is anchored to the same paragraph that contains the equation.
Please use the "Fix it" tool in the following KB article to resolve the problem. See:
http://support.microsoft.com/kb/2528942
Hope this helps.
Regards,
Steve Fan
TechNet Community Support

Error message when I open Dreamweaver files

Hi,
I have troubled of Dreamweaver CS3 and hope some one can help
me. When I open a file from one of my site which is connecting to
database, I got error message that I have to close the Dreamweaver.
It doesn't tell much what exactly wrong at the error message. These
sites were working fine before. Any idea why this happen and how
can I fix it?
Thank in advance!
Kenneth

Not without a little more information. What server model are
you using?
What OS do you run? Can you provide connection code and
recordset code?
Lastly, what version of Dreamweaver did you create your pages
in? If it was
8, was it updated to 8.02?
Nancy Gill
Adobe Community Expert
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)
Technical Editor: Dreamweaver CS3: The Missing Manual,
DMX 2004: The Complete Reference, DMX 2004: A Beginner's
Guide
Mastering Macromedia Contribute
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web Development
"takcw" <[email protected]> wrote in message
news:fj5um4$l7g$[email protected]..
> Hi,
>
> I have troubled of Dreamweaver CS3 and hope some one can
help me. When I
> open
> a file from one of my site which is connecting to
database, I got error
> message
> that I have to close the Dreamweaver. It doesn't tell
much what exactly
> wrong
> at the error message. These sites were working fine
before. Any idea why
> this
> happen and how can I fix it?
>
> Thank in advance!
> Kenneth
>
>
>

Libre ~ Error 2038 "failed to open the file"

Good morning.
I have a Libre-eBook reader Pro.
I have downloaded and synced from Kobo to my Libre with no problems.
But when I try to download ebooks from the public library they download and open in Digital Editions just fine. I drag and drop them into the bookshelf marked Libre-eBook Reader Pro.
They show up when I turn on my ebook, but when I try to open them I get the 'failed to open the file'.
I was also getting the Error 2038 in Digital Editions when I did the drag and drop thing. I read through the forum and went through the steps recommended for the Nook ~ deleting the digital editions folder on my ebook and having Adobe reauthorize it. I no longer get the 2038 error message in Adobe, but I am still unable to open the books from the library.
I have tried deleting the books from ereader and ADE and redownloading from the Library. Didn't help.
Any other suggestions?
Thanks.
Heather

Hi Ambs101010,
Based on my research, the error can be caused by that the machine.config file is incorrect or corrupted. Please use the following steps to troubleshoot the issue and check if the error still occurs.
1. Open the machine.config in Visual Studio and check if there is any syntax errors. If syntax errors exist, modify the machine.config file directly. For more details, please review this similar
thread.
2. If the error still persists, please follow the steps to replace the machine.config file. Another alternative method is to replace the current machine.config with the machine.config file from another computer.
      a. Go to the folder C:\windows\Microsoft.NET\Framework\v2.0.50727\CONFIG
      b. Rename the file machine.config to machine.config.old
      c. Make a copy of the file machine.config.default and rename the copy to be machine.config
      d. If your Operating System is 64-bit, go to the folder C:\windows\Microsoft.NET\Framework64\v2.0.50727\CONFIG and repeat the above steps
      e. Reboot your computer
Thanks,
Lydia Zhang

Error WUC-14 after open a File with CLIENT_TEXT_IO.FOPEN (Oracle 10g)

Hi,
the error WUC-14 occurs during open a file with forms10g.
F_VersandZahlen := CLIENT_TEXT_IO.FOPEN (F_Dateiname,'w');
Afterwards the error message it ist possible to write into the file and close it correctyl (without am error message - also the Information is correkt).
During debugging the error occurs in the function GETPROPERTY (Webutil).
the error occurs only sometimes.
Can anybody help me to solve the problem ?
best regards,
Alexandra Schermann

Hi Alexandra,
You can catch the exception in Exceptions part and close the file. Something like,
DECLARE
F_VersandZahlen CLIENT_TEXT_IO.FILE_TYPE;
BEGIN
F_VersandZahlen := CLIENT_TEXT_IO.FOPEN (F_Dateiname,'w');
<do your processing>
EXCEPTION
WHEN OTHERS THEN
CLIENT_TEXT_IO.FCLOSE(F_VersandZahlen);
END;-Arun

Error when trying to open Mac file with Captivate 6 Win

I've tried opening Captivate 6 files (.cptx/.cptl) that were created on the Mac version with Captivate 6 on Win7. Got the error message "can't open file" telling me to check the file and my resources. Resources are ok, the file was sent via email.
How can I set up a workflow for Captivate 6 between Mac and PC users that works? The discussion to Win files crashing Captivate Mac didn't help as there's no solution posted. Are there any issues concerning the compatibility of Mac and Win files within Captivate 6?
Any help is very much appreciated a we've got a deadline looming.
Regards,
Susanne

Same problem here. Something to do with path to
swfobject_modified.js??
Even though I have correct path I still can't get it to work
on CMS site, even though it works OK on static site:
www.askew.co.nz (SWF is a red ellipse with mirrored "S")
The problem page (CMS site) is here:
http://askew-site.fjstaging01.pbstaging.com/
The error is:

(line 144 Uncaught ReferenceError: swfobject is not
defined)

Error in Jdeveloper by opening .jws file

Similar Messages

Maybe you are looking for