Error in JMS Adapter Configuration.

Hi,
Its regarding JMS receiver adapter for MQ Series.
We have MQ 6.0 installed on PI server. While trying to connect thorough JMS receiver adapter we are getting a connection failure error at communication channel level.
The MQ administrator is of the opinion that as MQ is local to the PI server a channel is not required.
In the MQ server, the administrator has created a Manager and Queue which we are using in the JMS receiver channel.
We have provided the queue connection factory as the default one used for MQ 5.3
class also as the default. (All the extra jar files required for MQ 6.0 is deployed).
The error description says:
Error during channel initialization; exception trace: javax.jms.JMSException: MQJMS2005: failed to create MQQueueManager for '10.23.86.134:XBEIG_QMGR1'
at com.ibm.mq.jms.services.ConfigEnvironment.newException(ConfigEnvironment.java:586)
at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:2110)
at com.ibm.mq.jms.MQConnection.createQMNonXA(MQConnection.java:1532)
com.ibm.mq.MQException: MQJE001: An MQException occurred: Completion Code 2, Reason 2059
MQJE011: Socket connection attempt refused.
Any inputs would be very helpful...
Many Thanks,
Rosine.

you can check the SAP Note 856346 - FAQ on JMS adapter it might have some info

Similar Messages

Error in JMS Adapter Configuration...Pls help..

Hi,
My scenario is that FTP->MQ Queue->Local JMS Queue->XI.
MQ Queue has successfully picked up the files from FTP and posted successfully into Local JMS Queue. But XI is unable to pick them up from Local JMS Queue.
It is giving the following error:-
Error during channel initialization; exception trace: javax.jms.JMSException: MQJMS2005: failed to create MQQueueManager for '153.88.140.28:ESEALMW303'
Here are the details what I enetered in the Sender JMS Adapter Configuration:-
Transport Protocol-> WebsphereMQ(Non JMS)
QueueConnection Factory Java Class-> com.ibm.mq.jms.MQQueueConnectionFactory
Queue Java Class->com.ibm.mq.jms.MQQueue
IP address:            153.88.140.28
Server port:            1414
Queue Mgr name ESEALMW303
Channel name        MQMA_ESEALMW303_1
JMS queue            EAB_MDMTOCBS_LQ01
Any help would be appreciated

Soumya,
Refer Abhy's reply in the below thread
XI JMS error MQJMS2005 : failled to create MQQueuemanager for ....
raj.

Sender JMS adapter configuration for IBM MQSeries

Dear All,
i am doing a IBM MQSeries 5.2.x Message ->sender JMS adapter -> XI server -> receiver RFC adapter -> R/3.
i have deployed the JMS adapter with the required jar files of IBM MQSeries 5.2.x in XI server.
in Sender JMS adapter configuration for IBM MQSeries 5.2.x, i have put following data:
1. Transport Protocol: Websphere MQ - is it okay?
in JMS provider settings:
2. in channel name - what should be there?
3. Transport Network protocol should be TCP/IP or WebsphereMQ - how to decide this thing.
4. JMS Complaint - whether WebsphereMQ or JMS API.
in JMS Settings:
5. JMS Queue user - is this IBM MQSeries 5.2.x Queue User or someother user?
6. JMS Message Selector - what data to take here.
So if anybody has connected IBM MQSeries 5.2.x to XI via JMS adapter, please answer my above queries.
Regards,
Rajeev Gupta

Hi Swaroop,
you can send me those documents at my gmail-id : [email protected]
Hi All,
one more question - to connect XI server to IBM MQSeries via JMS adapter in ID, do we need to have a MQSeries Client installed on XI server - or - just by configuring JMS adapter, we can send messages from IBM MQSeries to XI server without any MQSeries client on XI server?
Why Channel name is required in JMS configuration data?
Thanks,
Rajeev Gupta

Jms adapter configuration and testing

Hi,
Please inform the JMS adapter configuration and testing.
Thanks
Naidu

Hi,
tried to reach JMS adapter but was not sure about what to inform it with
Ok, just being silly there... About your problem:
Overview - not complete and a little dated but notetheless good starting point
Exploring JMS and SAP-XI JMS Adaper
JMS FAQ Note - valuable official statements for various questions. Many linked notes which may also be of interrest
http://service.sap.com/sap/support/notes/856346
Driver deployment note
http://service.sap.com/sap/support/notes/1138877
Some other valuable links provided by Chirag Gohil
Re: jms senarios
HTH for starters
Cheers
Jens

JMS Adapter configuration error

Hi All
      My scenario is file to jms.i configured the webspher MQ and i created queues manager and channals.I done JMS receiver like this,
1)Transport protocol:WebspherMQ JMS provied
2)Message porotocol:JMS x.1
3)Adapter Enigen:   Integration Server
4)QueueConnecation Factery Java           Class:com.ibm.mq.jms.MQQueueConnectionFactory
5)Queue Java Class:com.ibm.mq.jms.MQQueue
6)IP Address or server name:Localhost
7)Server port:1414
8)Queue Mannager Name:QM_sapxi
9)channal name:CHANNAL1
10)JMS queue:MQCONN.OUT
11)Transport/netwrok protocol:TCP/IP
12)JMS compliant:WebSpherMQ(non jms)
13)Deliver mode of message Producer:Persist JMS Messages in the JMS provider
14)mapping of the message:Entier message=JMS Payload
finaly i checked my Adapters status,it was red and i got the error Receiver channel. Details: (No detail information set. so pls help me .pls suggest me
thanking u
regards ,
ramesh

Hello Ramesh,
I assume you deployed your jms libraries via SDM.
You can check a successfull deployment in the libraries of the server node via the J2EE Admin tool.
To get a more detailed log, you can augment the log level to debug for destinations
com.sap.aii.af.service.jms & com.sap.aii.adapter.jms. You can do so in the logConfigurator of the J2EE Admin tool.
Afterwards reactivate your comm channel in the configuration. (Just change the short text, so you can change and reactivate.)
When you then go to the defaultTrace file via the logViewer, you should see more details on the error.
Greetings,
Bart

Error in JMS adapter 11g

Hi
I have configured a JMS Adapter in Jdev 11.1.1.3.0 to consume message from a queue(JNDI Name as eis/wljms/WLQueue) on a weblogic server(10.3.1) in a different domain and deployed my BPM process to the soa server 11g.
I created a new outbound connection pool (eis/wljms/WLQueue) in Deployments->JMSAdapter->Configuration->Outbound Connection Pools with Connection Pool Interface: oracle.tip.adapter.jms.IJmsConnectionFactory
Also updated the factory properties field for eis/wljms/WLQueue with :
java.naming.factory.initial=weblogic.jndi.WLInitialContextFactory;java.naming.provider.url=t3://10.75.85.151:9021;java.naming.security.principal=weblogic;java.naming.security.credentials=weblogic
And finally updated the deployment plan for JMSAdapter.
However I am getting the following error :
<May 24, 2010 10:08:29 AM GMT+05:30> <Warning> <oracle.soa.adapter> <BEA-000000>
<JMSAdapter sample JMSMessageConsumer_init: Retrying connection; attempt #1>
<May 24, 2010 10:08:29 AM GMT+05:30> <Warning> <oracle.soa.adapter> <BEA-000000>
<JMSAdapter sample
BINDING.JCA-12141
ERRJMS_CONN_FAC_NOT_FOUND.
ERRJMS_CONN_FAC_NOT_FOUND.
Unable to instantiate connection factory. JMS adapter was unable to look up the
connection factory neither through JNDI nor instantiate it as a Java class.
Please examine the log file to determine the problem.
at oracle.tip.adapter.jms.JMS.JMSConnectionFactoryFactory.getConnectionF
actory(JMSConnectionFactoryFactory.java:207)
at oracle.tip.adapter.jms.JMS.JMSConnectionFactoryFactory.getQueueConnec
tionFactory(JMSConnectionFactoryFactory.java:86)
at oracle.tip.adapter.jms.JMS.JMSConnection.init(JMSConnection.java:173)
at oracle.tip.adapter.jms.inbound.JmsConsumer.init(JmsConsumer.java:862)
Caused by: javax.naming.AuthenticationException [Root exception is java.lang.Sec
urityException: User: weblogic, failed to be authenticated.]
at weblogic.jndi.internal.ExceptionTranslator.toNamingException(Exceptio
nTranslator.java:42)
at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLIni
tialContextFactoryDelegate.java:787)
at weblogic.jndi.WLInitialContextFactoryDelegate.pushSubject(WLInitialCo
ntextFactoryDelegate.java:681)
at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialCon
textFactoryDelegate.java:469)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLIni
tialContextFactoryDelegate.java:376)
at weblogic.jndi.Environment.getContext(Environment.java:315)
at weblogic.jndi.Environment.getContext(Environment.java:285)
at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialCont
extFactory.java:117)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:6
67)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.InitialContext.<init>(InitialContext.java:197)
at oracle.tip.adapter.jms.JMS.JMSFactory.getInitialContext(JMSFactory.ja
va:183)
at oracle.tip.adapter.jms.JMS.JMSConnectionFactoryFactory.getConnectionF
actory(JMSConnectionFactoryFactory.java:131)
... 26 more
Caused by: java.lang.SecurityException: User: weblogic, failed to be authenticat
ed.
at weblogic.common.internal.RMIBootServiceImpl.authenticate(RMIBootServi
ceImpl.java:116)
at weblogic.common.internal.RMIBootServiceImpl_WLSkel.invoke(Unknown Sou
rce)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
dSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
a:473)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.jav
a:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173
Anyone has come across this issue? if yes, how do I resolve this?
Thanks

Have you tried cross-domain security or domain trust?

Error in JMS adapter MQ to PI

Hi,
We are connecting to Websphere MQ using the JMS adapter.
The message coming from MQ is a flat structure. So we have configured the Message Transform Bean to do the conversion from plain to xml structure according to
http://wiki.sdn.sap.com/wiki/display/XI/HowTo...ContentconversionmodulewithJ2EEJMS+adapter
But when we test a message we end up with this error:
TransportException: No MIME header found at com.sap.aii.adapter.jms.core.channel.filter.ConvertBinaryToXiMessageFilter.filter
I'm not sure if this is related to the content conversion or general settings in the JMS adapter.
Any inputs are highly appreciated.
Thanks
Shakthi

Hi Shakthi,
Actually, it is the error that tells you where the error took place:
com.sap.aii._adapter.jms_.core.channel.filter.ConvertBinaryToXiMessageFilter.filter
You might also want to refer to this thread: Error in JMS Sender Adpater for a few ideas to solve your problem. In general, it is connected to your adapter configuration. Please review it once again ang you should have the problem fixed.
Hope this helps,
Greg

Error with JMS adapter

We are using a JMS adapter with XML input files and we are getting the following error:
:#1.#00144F80C55600310000001A00001BC700DD9B18A4E85181#1288983973313#com.sap.engine.messaging.impl.core.queue.consumer.SendConsumer##com.sap.engine.messaging.impl.core.queue.consumer.SendConsumer.handleRetriesOnException(MessagingException, QueueMessage, MessageController)#J2EE_GUEST#223963##<applicationserver_hostname>_<SID>_623765##8bfba530dea111dfbf9b00144f80c556#MS Queue Worker [JMS_http://sap.com/xi/XI/SystemSend]##0#0#Error##Java###Transmitting the message to endpoint using connection failed, due to: .#3#JMS_http://sap.com/xi/XI/System#com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error transmitting the message over HTTP. Reason: java.io.IOException: Error writing to server#http://<hostname>:50000/sap/xi/engine?type=entry#
One that is interesting is that these errors are occurring on application servers only. Could it be that the Integration Server URL is not fully qualified. In the SLD it's just <hostname>, not <hostname>.test.com (as an example).
Any help is greatly appreciated.

Dear George,
Concerning the issue, in the Integration Engine please try increasing the value of the parameter :
   - icm/HTTP/max_request_size_KB
from the default size of 100MB to e.g., 2GB.
Kindly go through the following link :
- http://help.sap.com/saphelp_nwpi71/helpdata/en/58/108b02102344069e4a31758bc2c810/frameset.htm
for details.
Additionally, it is recommended to setup a large message queue,
i.e.,
add an entry and appropriate value (e.g., 20480 KB) for the TUNING parameter : 'EO_MSG_SIZE_LIMIT'
using
TCODE
   sxmb_adm
    Integration Engine Configuration
      Select Edit mode and Add the TUNING parameter
I Hope this helps.
Best Regards
Nishwanth

Error in JMS Adapter:

Receiving the below error, thought of JMS Drivers problems undeployed and re-deployed several times, but still problem persist in XI.
Success     MP: Processing local module localejbs/SAP XI JMS Adapter/ConvertMessageToBinary
2010-09-09 11:45:21     Error     MP: Exception caught with cause com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Path to object does not exist at SAP XI JMS Adapter, the whole lookup name is localejbs/SAP XI JMS Adapter/ConvertMessageToBinary.
2010-09-09 11:45:21     Error     Exception caught by adapter framework: Path to object does not exist at SAP XI JMS Adapter, the whole lookup name is localejbs/SAP XI JMS Adapter/ConvertMessageToBinary.
Error     Delivery of the message to the application using connection JMS_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Path to object does not exist at SAP XI JMS Adapter, the whole lookup name is localejbs/SAP XI JMS Adapter/ConvertMessageToBinary.: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Path to object does not exist at SAP XI JMS Adapter, the whole lookup name is localejbs/SAP XI JMS Adapter/ConvertMessageToBinary..
2010-09-09 11:45:22     Success     The message status set to WAIT.
2010-09-09 11:45:22     Success     The asynchronous message was successfully scheduled to be delivered at Thu Sep 09 11:50:21 CDT 2010.
The JNDI Libraries are available in Visual Admin, not sure what else causing the issue. Any guru's help is appreciated

XI 3.0 SP20
Regarding the note, that only applied below sp4. We are on SP20. The default values appears but those are not working.This seems to be a problem with Dev only, Q and P is working fine at this moment
If i actually delete module processor's from Sender and Receiver channel, things are working fine. But not sure if it is going to break anything. And this needs to be applied in all landscape. But i have to present a reason, why this weird behavior all of a sudden
Sender
    SAP XI JMS Adapter/ConvertJMSMessageToBinary
    SAP XI JMS Adapter/ConvertBinaryToXMBMessage
Receiver
    SAP XI JMS Adapter/ConvertMessageToBinary
    SAP XI JMS Adapter/SendBinarytoXIJMSService

Error in JMS Adapter for MQ series

We have configured a JMS Adpater to connect to MQ Serries queue manager running on our local server. The XI Server is a remote server where JMS adapter is deployed.
Upon deployment we see following string in JMS adapter log -
Sender channel. Details: com.ibm.mq.jms.MQQueueConnectionFactory
And the status of Adpater is RED.
The Adpater is configured in sender mode.
We have created a local queue in Queme Manger and a Server Connectio channel which is being used in adpater configuration.
Please suggest what could be the missing link here.
Appreciate if you can provide us link s to any docuemtn which details the steps to configure an MQ JMS adapter.
Thanks,
Garima

Hi Garima,
Please check the following:
1. Add dhbcore.jar also to aii_af_jmsproviderlib.sda and deploy it.
2. Check the existence of your JMS drivers.
3. Check the following link and Install the drivers as the way it is mentioned in the guide 'How To Install And Configure External Drivers For JDBC & JMS'
https://websmp204.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000071155&_SCENARIO=01100035870000000202
There are 4 files which needs to be added. http://help.sap.com/saphelp_nw04/helpdata/en/cd/d85a9d6fab7d4dbb7ae421f710626c/frameset.htm
Any of the above solutions should help you solve the problem.
Regards,
Abhy

Query: Sender JMS Adapter configuration

Hi All,
    I'm trying out a scenario which sends data from a Message Queue to SAP.
    For this I need to configure JMS adapter in the sender side. I would like to know whether <b>should I specify any content conversion parameters like "fieldLength" or "fieldSeperator" as we do it in sender file adapter for XI's indivual field identification.</b>
   If no then how the variables will get mapped properly to the XI outbound ( sender ) Structure from Message Queue???..
   Bcoz I believe MQ sends the data as a single stream of characters not as individual field..
   Please advice..
Regards,
Joe.
Message was edited by: Joe

Hi Satarupa,
          Thanks for your reply.
But if I'm getting say a stream of 10 characters (Name - 4 characters, Address - 5 characters, Option - 1 character totally 10 characters), how the system will know it has to send first 4 characters to name defined in XI, next 5 characters to Address defined in XI and the next 1 character to Option if I don't specify the conversion parameters??
Bcoz the data flows in the same way to XI as it flows for file adapter, where we speciy the content conversion parameters which helps it to send it to the variables defined in XI accordingly.
If you've some docs on both sender and receiver JMS adapters pls. lemme know..
Thanks,
Joe.

Unable to select jms destination in the jms adapter configuration

hi,
I am trying to use JMS queues for consuming messages but after creating the JMS queues(destination) in the application server, i am unable to find the destination while configuring the jms adapter in jdeveloper.
any help would be appreciated

i am using soa 10g. are you saying there is an option for starting the jms server in the application sever or do i have to create a seprate jms erver for creating the jms server etc.
it will be really helpful if you can explain the how to create/start jms server,jms queue etc or provide link to any article that is available. also please note that i am using SOA 10g
thanks in advance

Error in JMS Adapter while communicating with WebSphere MQ 7.5

Guys,
I am trying to integrate JMS Adapter with WebSphere MQ.
JMS Adapter : 14.0.2.0
WebSphere MQ : 7.5
I am getting error like below. Please help me out. Thanks
17/04/14 16:25:49 java.lang.NoSuchMethodError: com.ibm.msg.client.jms.JmsSession.createQueue(Ljava/lang/String;)Ljavax/jms/Queue;
at com.ibm.mq.jms.MQSession.createQueue(MQSession.java:708)
at com.acta.adapter.jms.MQConfigHandler.getQueue(MQConfigHandler.java:74)
at com.acta.adapter.jms.JMSAdapter.getQueue(JMSAdapter.java:547)
at com.acta.adapter.jms.JMSGetOperation.start(JMSGetOperation.java:398)
at com.acta.adapter.sdk.OperationWrapper.runOperation(OperationWrapper.java:171)
at com.acta.adapter.sdk.OperationWrapper.run(OperationWrapper.java:94)
at java.lang.Thread.run(Thread.java:662)
I have added following jars in class path of the adapter.

Problem solved after removing j2ee.jar file from classpath !

JMS Adapter Configuration (Access JMS Provider Generically)

Hi Exports,
How can i configure JMS adapter Using Access JMS Provider Generically, where can we mentioned target server. there is Quename and username and password but there is no target server details field. could you please give me suggetion how to configure this.

Hi,
This will help you
JMS Adapter
/people/kan.th/blog/2007/02/05/exploring-jms-and-sap-xi-jms-adaper
http://help.sap.com/saphelp_nw2004s/helpdata/en/cd/d85a9d6fab7d4dbb7ae421f710626c/content.htm
Sender Jms Adapter
http://help.sap.com/saphelp_nw2004s/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/content.htm
Receiver Jms Adapter
http://help.sap.com/saphelp_nw2004s/helpdata/en/10/b1b4c8575a6e47954ad63438d303e4/content.htm
Regards
Agasthuri Doss

JMS Adapter Configuration at reciver side

Hi,
Actaully I have to configure JMS adapter HAving Content Conversion.
I m getting XML throuh XI and wan to convert it to TEXT File.
Can anyone tell me wat MODULE NAME, TYPE, MODULE Key , PARAmeter NAMe and VAlue i have to take.
Hemant

Hi,
Take a look at this document,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
Regards,
Bhavesh

Error in JMS Adapter Configuration.

Similar Messages

Maybe you are looking for