Error in Leave balance display in ESS

HI all
We are on ECC 5.0 and Netweaver 2004. The problem that I am facing is in the Leave balance display in ESS. The entitlement does not show any value even if there is quota available in IT 2006. Am I missing any configuration?
Regards
Rajay

Hi,
Just check your Config in the SAP. Once you are confident on your setting in Leave of ESS in SAP. Ask your Basis guy to check for the patch level and also the authorization. This you are facing for every employee or for particular employee only.
Good Luck.
Om.

Similar Messages

  • Leave balance inconsistent in ESS Portal

    Goodday all,
    I'm stuck here. We are currently on r/3 4.7 and using ESS (ITS Version) via Portal. Recently, we are having problem with one of our leave type. The leave type is not showing the correct balance in ESS leave request. I've checked the absence quota in IT2006 and cross checked with pt_qta10, both are showing the correct result. I've also checked rptkok00 and there were no errors. However, when our user apply for leave via ESS, their balance at the bottom table are showing the wrong value. Any ideas on this?
    Regards

    Dear Deys
    Last few days we are also having same problem, but unable to solve it,
    Can you Please share us how to solve this matter.
    Leave Balance in 2006 is ok, But in ESS showing either 0 or negative leave balance,
    It's humble request to you, Pl share some inputs so that I can  also solve it.
    Thanks .

  • Java.lang.NullPointerException Error in Leave Request tab of ESS in Portal

    Hello All,
    I have configurted ESS/MSS on EP 7.01 SP03, but it is giving error in almost every tab.
    When i navigate in to Employee Self Service < Working Time < Leave Request tab it ends up with error pasted below.
    java.lang.NullPointerException
    Same error appears for other tabs like Employee Self Service < Working Time <Quote Overview/Clocl In/Out Corrections
    Any help to solve this issue will be highly appretiated.
    Thanks
    Vinit

    Full exception chanin from NWA is as below
    Exception occured during processing of Web Dynpro application sap.com/ess~lea/LeaveRequest. The causing exception is nested.
    [EXCEPTION]
    java.lang.NullPointerException
    at com.sap.pcuigp.tracking.BTrackingComp.isValuePackSystem(BTrackingComp.java:290)
    at com.sap.pcuigp.tracking.BTrackingComp.onInit(BTrackingComp.java:206)
    at com.sap.pcuigp.tracking.wdp.InternalBTrackingComp.onInit(InternalBTrackingComp.java:173)
    at com.sap.pcuigp.tracking.BTrackingCompInterface.onInit(BTrackingCompInterface.java:115)
    at com.sap.pcuigp.tracking.wdp.InternalBTrackingCompInterface.onInit(InternalBTrackingCompInterface.java:124)
    at com.sap.pcuigp.tracking.wdp.InternalBTrackingCompInterface$External.onInit(InternalBTrackingCompInterface.java:198)
    at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:922)
    at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:891)
    at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1084)
    at com.sap.pcuigp.xssutils.pernr.FcEmployeeServices.onInit(FcEmployeeServices.java:219)
    at com.sap.pcuigp.xssutils.pernr.wdp.InternalFcEmployeeServices.onInit(InternalFcEmployeeServices.java:273)
    at com.sap.pcuigp.xssutils.pernr.FcEmployeeServicesInterface.onInit(FcEmployeeServicesInterface.java:135)
    at com.sap.pcuigp.xssutils.pernr.wdp.InternalFcEmployeeServicesInterface.onInit(InternalFcEmployeeServicesInterface.java:198)
    at com.sap.pcuigp.xssutils.pernr.wdp.InternalFcEmployeeServicesInterface$External.onInit(InternalFcEmployeeServicesInterface.java:258)
    at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:922)
    at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:891)
    at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1084)
    at com.sap.xss.essceservices.vcceassignmentselection.VcCEAssignmentSelection.onInit(VcCEAssignmentSelection.java:235)
    at com.sap.xss.essceservices.vcceassignmentselection.wdp.InternalVcCEAssignmentSelection.onInit(InternalVcCEAssignmentSelection.java:174)
    at com.sap.xss.essceservices.vcceassignmentselection.VcCEAssignmentSelectionInterface.onInit(VcCEAssignmentSelectionInterface.java:162)
    at com.sap.xss.essceservices.vcceassignmentselection.wdp.InternalVcCEAssignmentSelectionInterface.onInit(InternalVcCEAssignmentSelectionInterface.java:144)
    at com.sap.xss.essceservices.vcceassignmentselection.wdp.InternalVcCEAssignmentSelectionInterface$External.onInit(InternalVcCEAssignmentSelectionInterface.java:220)
    at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:564)
    at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
    at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
    at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
    at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
    at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
    at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
    at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
    at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
    at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:754)
    at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:289)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
    at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
    at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
    at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
    at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:220)
    at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1289)
    at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:356)
    at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:549)
    at com.sap.portal.pb.PageBuilder.wdDoRefresh(PageBuilder.java:593)
    at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:865)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
    at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
    at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
    at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:319)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:684)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
    at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    Edited by: Vinit Soni on Aug 27, 2010 7:59 AM

  • Error in Leave Request:ESS

    Hi All,
    I am getting a error in Leave Request Iview in ESS application.
    I am using EP 7.0.
    I have done the required settings in R/3.Created Rule group,added applciation parameter in iview,JCos are working.
    But still I am getting this error.
    If anybody has the idea on how to solve it please help.
    The initial exception that caused the request to fail, was:
    java.lang.NullPointerException
         at com.sap.xss.hr.lea.blockcale.VcBlockCale.transferFixedBcData(VcBlockCale.java:371)
         at com.sap.xss.hr.lea.blockcale.VcBlockCale.onInit(VcBlockCale.java:262)
         at com.sap.xss.hr.lea.blockcale.wdp.InternalVcBlockCale.onInit(InternalVcBlockCale.java:275)
         at com.sap.xss.hr.lea.blockcale.VcBlockCaleInterface.onInit(VcBlockCaleInterface.java:163)
         at com.sap.xss.hr.lea.blockcale.wdp.InternalVcBlockCaleInterface.onInit(InternalVcBlockCaleInterface.java:144)
         at com.sap.xss.hr.lea.blockcale.wdp.InternalVcBlockCaleInterface$External.onInit(InternalVcBlockCaleInterface.java:220)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:564)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
         at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:756)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:291)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
         at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
         at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:220)
         at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1289)
         at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:356)
         at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:549)
         at com.sap.portal.pb.PageBuilder.wdDoInit(PageBuilder.java:193)
         at com.sap.portal.pb.wdp.InternalPageBuilder.wdDoInit(InternalPageBuilder.java:150)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:756)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:291)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    Regards,
    Sumangala

    Hi,
    Please check whether that particular employee having all the necessary authorization or not in ECC side.
    Also mention the ECC and ESS version with SP level.
    Regards,

  • How to display Error messages through BADI HRPAD00INFTY in ESS ?

    Hi,
    In ESS, I want to perform custom validation on IT1067 ( Health Plan ) and allow only specific combinations of health plans to be selected.   We are on ECC6.0 EhP4 .  This infotype is "NOT PERMITTED" in the new decoupled framework and hence I cannot use NEW BADI's for validation and I am stuck with Classical BADI - HRPAD00INFTY.
    In my classical badi HRPAD00INFTY, after validation, I want to display an error message if "Invalid Combination" is selected by the user.  
    I tried using the following code to display the error message :
              DATA badi_message_handler   TYPE REF TO cl_hrpa_message_list.
              DATA message_handler        TYPE REF TO if_hrpa_message_handler. 
              DATA msg                    TYPE symsg.
              DATA is_ok                  TYPE boole_d.
              CREATE OBJECT badi_message_handler.
              message_handler = badi_message_handler.
              msg-msgid = 'YHBN'.
              msg-msgty = 'E'.
              msg-msgno = '006'.
              msg-msgv1 = c_none_plans. "'Invalid Plan'(z09).
              CALL METHOD message_handler->add_message
                EXPORTING
                  message = msg
                  cause   = message_handler->unknown.
                  is_ok = space.
              badi_message_handler->add_messages( message_handler ).
              RAISE error_with_message.
    The message is displayed in ESS but after that the Java Trace Exception is displayed.   I  want to display the error message in a user friendly way and provide an option to correct the plans.
    Please let me know if anyone has done similar thing or have any suggestions.
    Thanks

    Hi,
    DATA badi_message_handler   TYPE REF TO cl_hrpa_message_list.
              DATA message_handler        TYPE REF TO if_hrpa_message_handler. 
              DATA msg                    TYPE symsg.
              DATA is_ok                  TYPE boole_d.
              CREATE OBJECT badi_message_handler.
              message_handler = badi_message_handler.
              msg-msgid = 'YHBN'.
              msg-msgty = 'E'.
              msg-msgno = '006'.
              msg-msgv1 = c_none_plans. "'Invalid Plan'(z09).
              CALL METHOD message_handler->add_message
                EXPORTING
                  message = msg
                  cause   = message_handler->unknown.
                  is_ok = space.
              badi_message_handler->add_messages( message_handler ).
         *-- Add following--
        Exit.
              RAISE error_with_message.

  • ESS - Leave Request Display Fields

    Hi:
    On the leave request screen in ESS, the following fields are displayed at the bottom of the screen: 
    Type of Leave
    Date
    Time
    Duration
    Approver
    Note for Approver
    Does anyone know if it is possible to hide the Time fields? If so, where are the changes made? These fields will not be used as part of our leave request process.
    Regards,
    Brian

    Yes personalisation
    or
    Make sure in the counting rule you have defined this absense
    Condition < 1 day? Is this checked? if not checked you ll not
    see the Clock Times
    ALso check the T554s customisation for the absence?
    Minimum duration is given as ?
    Please check the configuration of the
    absence type does it allow the partial day to be booked?
    ie In the Counting Rule ( T556C) can you book only full day or partial
    day.
    Also
    Feature HRSIF had value '0'. So the system
    generated clock times itself. But when you set the feature to '1' then
    the probleme is solved.

  • Error while accessing a service in ESS

    Hi All,
    I have uploaded a PDF file in KM, i have created KM document iview for that, in portal content when i triying to priview this iview it is getting opened. I have assigned this as link in in ESS but when i am trying to access this link i am getting an error "Page Cannot be Displayed", when i check the log file i am getting some error.
    info 2010-04-15 10:39:30:654 ACCESS.OK: Authorization check for caller assignment to J2EE security role [SAP-J2EE-Engine : guests].
    /System/Security/Audit/J2EE com.sap.engine.services.security.roles.audit sap.com/irj gsusapdp04 Server 0 0_47203
    Full Message Text
      ACCESS.OK: Authorization check for caller assignment to J2EE security role [SAP-J2EE-Engine : guests].
      warning 2010-04-15 10:39:23:094 Insufficient permissions for getting SLD access information. You can add permissions for your application via the SLD service in the 'Visual Administrator'.
    /System/Server/SLDService com.sap.sldserv.SldApplicationService sap.com/tcwddispwda gsusapdp04 Server 0 0_47203
    Full Message Text
    Insufficient permissions for getting SLD access information. You can add permissions for your application via the SLD service in the 'Visual Administrator'.
    [permissions_collection_operator]: [permission_collection]:  domain's permissions: [
      standalone: []
      collections:
    {(java.lang.RuntimePermission loadLibrary)(java.lang.RuntimePermission queuePrintJob)(java.lang.RuntimePermission stopThread)}
    *{(java.io.FilePermission * read,write)}*
    *{(java.net.SocketPermission localhost:1024- listen,resolve)(java.net.SocketPermission * connect,resolve)}*
    *{(java.util.PropertyPermission java.version read)(java.util.PropertyPermission java.vm.name read)(java.util.PropertyPermission java.vm.vendor read)(java.util.PropertyPermission os.name read)(java.util.PropertyPermission java.vendor.url read)(java.util.PropertyPermission java.vm.specification.vendor read)(java.util.PropertyPermission os.version read)(java.util.PropertyPermission java.specification.vendor read)(java.util.PropertyPermission java.class.version read)(java.util.PropertyPermission java.specification.name read)(java.util.PropertyPermission file.separator read)(java.util.PropertyPermission java.vm.version read)(java.util.PropertyPermission os.arch read)(java.util.PropertyPermission java.vendor read)(java.util.PropertyPermission java.vm.specification.name read)(java.util.PropertyPermission java.specification.version read)(java.util.PropertyPermission java.vm.specification.version read)(java.util.PropertyPermission * read)(java.util.PropertyPermission path.separator read)(java.util.PropertyPermission line.separator read)}*
    Earlier we have EP 7 with SP14, at that time link was working fine, later due to some problem we have undeployed and redeployed ESS/MSS - BP and upgraded SP14 to SP18 now we are facing this error, can you just help me out solving this issue.
    Thanks & Regards,
    Ramesh.

    Hi Ramesh,
    I am facing with the same problem. Have you found the solution for it.
    Thanks.

  • Xclock Error: Can't open display: - after upgrading to openSSH 5.2p1

    I have got two servers apssvrX and apssvrZ on OEL. Both were built by the same team using their standard build scripts.
    Having received the servers I had installed Oracle (ODI) product on it successfully.
    Then as a part of requirement and as per Oracle support's advise, I had upgraded the ssh version on apssvrX server from OpenSSH_4.3p2 To OpenSSH_5.2p1, so that, I can implement the chroot jailing.
    As per Oracle advise, I had downloaded the 3 RPMs from "_http://layer1.rack911.com/openssh/rhel5/x86_64/" to run them on my first server i.e., apssvrX and then configured the sshd services following the below steps:
    a) Modify /etc/ssh/sshd_config to comment the below line:
    #Subsystem sftp /usr/libexec/openssh/sftp-server
    b) Add below lines:
    Subsystem sftp internal-sftp
    Match Group sftponly
    ChrootDirectory %h
    X11Forwarding no
    AllowTcpForwarding no
    ForceCommand internal-sftp
    Then lastly, Restart sshd services complete the configuration
    # /etc/init.d/sshd restart
    apssvrX server current details are as below:
    apssvrX$ uname -a
    Linux apssvrX 2.6.18-128.el5 #1 SMP Wed Jan 21 08:45:05 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
    apssvrX$ ssh -V
    OpenSSH_5.2p1, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008
    My problems started from this point onwards. I want to install another Oracle product using OUI, but when I try to execute xclock using the Exceed HummingBird tool on apssvrX server then it fails with the error - (xclock) Error: Can't open display:
    I tried the DISPLAY variable setup as well but to no use.
    Whereas I can successfully execute the xclock on apssvrZ and OUI as well. Its config details are as below:
    apssvrZ$ uname -a
    Linux apssvrZ 2.6.18-128.el5 #1 SMP Wed Jan 21 08:45:05 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
    apssvrZ$ ssh -V
    OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008
    Please advise the way forward.

    Tried but still same error.
    Affected servers's sshd_config is as below:
    [root@apssvrX]# cat /etc/ssh/sshd_config
    # $OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $
    # This is the sshd server system-wide configuration file. See
    # sshd_config(5) for more information.
    # This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin
    # The strategy used for options in the default sshd_config shipped with
    # OpenSSH is to specify options with their default value where
    # possible, but leave them commented. Uncommented options change a
    # default value.
    #Port 22
    Protocol 2
    Protocol 2
    #AddressFamily any
    #ListenAddress 0.0.0.0
    #ListenAddress ::
    # HostKey for protocol version 1
    #HostKey /etc/ssh/ssh_host_key
    # HostKeys for protocol version 2
    #HostKey /etc/ssh/ssh_host_rsa_key
    #HostKey /etc/ssh/ssh_host_dsa_key
    # Lifetime and size of ephemeral version 1 server key
    #KeyRegenerationInterval 1h
    #ServerKeyBits 768
    # Logging
    # obsoletes QuietMode and FascistLogging
    #SyslogFacility AUTH
    SyslogFacility AUTHPRIV
    #LogLevel INFO
    # Authentication:
    #LoginGraceTime 2m
    PermitRootLogin without-password
    #StrictModes yes
    #MaxAuthTries 6
    #RSAAuthentication yes
    #PubkeyAuthentication yes
    #AuthorizedKeysFile .ssh/authorized_keys
    # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
    #RhostsRSAAuthentication no
    # similar for protocol version 2
    #HostbasedAuthentication no
    # Change to yes if you don't trust ~/.ssh/known_hosts for
    # RhostsRSAAuthentication and HostbasedAuthentication
    #IgnoreUserKnownHosts no
    # Don't read the user's ~/.rhosts and ~/.shosts files
    #IgnoreRhosts yes
    # To disable tunneled clear text passwords, change to no here!
    #PasswordAuthentication yes
    #PermitEmptyPasswords no
    PasswordAuthentication yes
    # Change to no to disable s/key passwords
    #ChallengeResponseAuthentication yes
    ChallengeResponseAuthentication no
    # Kerberos options
    #KerberosAuthentication no
    #KerberosOrLocalPasswd yes
    #KerberosTicketCleanup yes
    #KerberosGetAFSToken no
    # GSSAPI options
    #GSSAPIAuthentication no
    GSSAPIAuthentication yes
    #GSSAPICleanupCredentials yes
    GSSAPICleanupCredentials yes
    # Set this to 'yes' to enable PAM authentication, account processing,
    # and session processing. If this is enabled, PAM authentication will
    # be allowed through the ChallengeResponseAuthentication mechanism.
    # Depending on your PAM configuration, this may bypass the setting of
    # PasswordAuthentication, PermitEmptyPasswords, and
    # "PermitRootLogin without-password". If you just want the PAM account and
    # session checks to run without PAM authentication, then enable this but set
    # ChallengeResponseAuthentication=no
    #UsePAM no
    UsePAM yes
    # Accept locale-related environment variables
    AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
    AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
    AcceptEnv LC_IDENTIFICATION LC_ALL
    #AllowTcpForwarding yes
    #GatewayPorts no
    #X11Forwarding no
    X11Forwarding yes
    #X11DisplayOffset 10
    #X11UseLocalhost yes
    #PrintMotd yes
    #PrintLastLog yes
    #TCPKeepAlive yes
    #UseLogin no
    #UsePrivilegeSeparation yes
    #PermitUserEnvironment no
    #Compression delayed
    #ClientAliveInterval 0
    #ClientAliveCountMax 3
    #ShowPatchLevel no
    #UseDNS yes
    #PidFile /var/run/sshd.pid
    #MaxStartups 10
    #PermitTunnel no
    # no default banner path
    #Banner /some/path
    # override default of no subsystems
    Subsystem sftp /usr/libexec/openssh/sftp-server
    ## Commented the sftp jailing configuration
    ##Subsystem sftp internal-sftp
    ##Match Group sftponly
    ## ChrootDirectory %h
    ## X11Forwarding no
    ## AllowTcpForwarding no
    ## ForceCommand internal-sftp

  • Payroll's Error message: Posting balance is not cleared (period 02 / 2014 a)

    Dear Experts,
    I am new to SAP HR. And would like get help for this issue
    After EHP 6 upgarde, when process the payroll, system prompt this error message: Posting balance is not cleared (period 02 / 2014 a).
    Checked the RT and it showed that the tax employee deduction was RM90.93. But when it comes to payslip display the tax amount showed different figure of RM90.94 which might be the cause for “posting balance is not cleared” message

    Hi,
    ChecK Manoj Shakya's response in the thread.
    Posting to FI-err :3G103, posting balance is not cleared
    Cheers,
    Manoj.

  • During an update of the applications on the BlackBerry smartphone an error message may be displayed "BlackBerry Desktop Software failed to validate your BlackBerry device update - Aborting install due to validation failure. Some packages contained unsatis

    I have reset both my torch and playbook back to original only thing that I kept was my contact. And still problems I am a few min away from leave my loved blackberry and going android !! Or heaven help us Phone
    Issues 1) playbook wont connect to desktop manager anymore 
    2) Play book has 2 calendar icons with two different settings on them ??? I have one that is currently working with my yahoo email and calendar account. 
    3) my Phone when connected to desk top software shows the calendar as read only
    4) Unable to update my phone says During an update of the applications on the BlackBerry® smartphone an error message may be displayed "BlackBerry Desktop Software failed to validate your BlackBerry device update - Aborting install due to validation failure. Some packages contained unsatisfactory dependencies." 
    I just want my email and Calendars to work I am tried of spending nights trying to get these deices working !!! 
    someone please help me. !! 
    I know you are going to ask I have updated everything last time and it is all as update as it can get. 
    As for now as I wait I am going to wipe my phone again and just set everything up again !! If I have to even my contacts AHHHH Help I am starting to think crazy thoughts 

    Did you try to eboot the your PC or laptop where your device is connected ?
    I experienced this with my windows laptop, after a failed to do an update, I restart the laptop and my Torch, then retried, and it's worked

  • How to incert custom leave application IView under ESS overview?

    Dear Team,
    We are developed custom leave application like Work & Time & now that displaying at work set row
    My client requirement is Custom leave application should also display under ESS Overview with iView pic along with other iView’s.
    Please share the your valuable suggestions on this
    Thanks,
    Srinivas

    What's the type of appilication you have developed, is it WDABAP based or ...
    Ask your portal consultant to create an iview for your application based on your application type (I.e WD ABAP/Transaction code etc) and assign that to page and then under role of ESS for Work & Time workset in portal content admin.

  • Employee Photo not displayed in ESS- Who's Who Services

    Hi All..
    My employee photo upload was successful in Quality System . I can also view the photo both in R/3 employee related facsmiles , header of PA20, PA30. and also the same photo's are displayed in ESS - Who's Who services.
    steps I used-
    OANR, OAC2, V_T585O, OAC3, OAC0 and for manual upload OAAD & OAOH.
    For Mass Upload - program- OA_UPLOAD_AND_LINK
    In production in the same way , all the photo's can be seen in the facsmiles but if I checked in Who's Who..Its coming like a outline with a red cross on top corner but without any photo.
    Kindly give your valuable suggesions..
    Thanks in advance...

    Hi Alok,
    I am also facing the same issue in Prod Environment. If u r having the solution, please share with me.
    I checked in NWA Trace is not registering.
    currently i am facing issue with Employee Photo Under ESS--> Emp Search --> Change Own Data.
    All my Employee Photos are uploaded in ECC, i am able to see from PA30 Header.
    we are having same setup in QA- Environment , all the employee Photos we are able to see from Portal.
    But in Production Environment, We are Having One Central Instance and Three application Instances and configured Load Balancing among Central Instance and Application Instances.
    All the Servers Content Server in SICF t-Code is activated.
    If i login into Prod Portal [either Centeal Instance or Application Instance] some time Employee Photo is Displaying Some time not,i.e No Photo at the top of corner X symbol. If i right click check on that URL, its poiting to the ECC server content server.
    But If Not is Displaying --> Size is Showing Not Avaliable but Demension is Displaying.
    But if Photo is Displaying ---> Both Size and Dimensions are Displaying Properly...
    PHOTO URL Path  When Photo is  Displaying
    http://xxx025.xxx.com:8011/sap/bc/contentserver/490?get&pVersion=0046&contRep=A2&docId=4CA926D07B816545E1000000AC16020B&accessMode=r&authId=CN%3DMRP&expiration=20101016091012&secKey=MIH4BgkqhkiG9w0BBwKggeowgecCAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGBxzCBxAIBATAZMA4xDDAKBgNVBAMTA01SUAIHIBADFBNVRjAJBgUrDgMCGgUAoF0wGAYJKoZIhvcNAQkDMQsGCSqGSIb3DQEHATAcBgkqhkiG9w0BCQUxDxcNMTAxMDE1MDkwNjMxWjAjBgkqhkiG9w0BCQQxFgQUS%2BicVNGV7i6eSE8TXK5R3umNS%2FgwCQYHKoZIzjgEAwQvMC0CFQCPAZf3C48Lvl6i935mlsVqMw95owIUUJFedqFO2AoLGe6QCHHqBMSObIU%3D
    Type : JPEG Image
    Size : Not Avaliable
    Dimension: 170*200 Pixels.
    PHOTO URL Path  When Photo is Not Displaying
    http://yyy024.yyy.com:8010/sap/bc/contentserver/490?get&pVersion=0046&contRep=A2&docId=4CA927D07B816545E1000000AC16020B&accessMode=r&authId=CN%3DMRP&expiration=20101016091451&secKey=MIH3BgkqhkiG9w0BBwKggekwgeYCAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGBxjCBwwIBATAZMA4xDDAKBgNVBAMTA01SUAIHIBADFBNVRjAJBgUrDgMCGgUAoF0wGAYJKoZIhvcNAQkDMQsGCSqGSIb3DQEHATAcBgkqhkiG9w0BCQUxDxcNMTAxMDE1MDg1NzQ3WjAjBgkqhkiG9w0BCQQxFgQUAP9cyWhLiOtkp4vwo9KK%2FPQtxWgwCQYHKoZIzjgEAwQuMCwCFDs729ib7fVKbiGKz5CPPd1YHch3AhR7NVgtXJI7ej07GiKMpG06lZPWoQ%3D%3D
    Type : JPEG Image
    Size : 3527 Bytes
    Dimension : 170*200 Pixels.
    We are always opening the Portal with Fully Qualifies Domain Name (FQDN)
    Please suggets the Solution, how to get rid of this Porduction Issue.
    Thanks & Regards
    Ganesh

  • Providing Calender option for dates in Leave Request form in ESS Portal

    Hello All,
    Can anyone tell me how to get the calender option for the From date and To date fields in the craete leave request iview in ESS ?
    In the backend R/3 transaction, we are able to see the calender option. But it is not visible in the portal.
    Thanks for your help...
    Regards,
    Bindu

    Go to:
    IMG > Personnel Management > Employee Self-Service (Web Dynpro ABAP) > Service-Specific Settings > Working Time > Leave Request > Processing Processes > Define Processing Processes for Each Rule Group
    Select your Rule Group
    Under Record Partial-Day Absences in   you have three options: Hours and Clock Times / Hours / Clock Times
    You should select Hours and save the record.
    With this, you will only have the duration and clock times will not be displayed.
    Regards,
    Harshal

  • Asset Balances Display

    Hi All
    I have a problem in Asset Display. My client follows calander year. He has not closed his accounts yet for the calander year 2007.
    He has also not done AJRW- Fiscal Year Change.
    But when the client is trying to look inot the Asset Balance Display, for the Asset Number or Cost Centre wise or plant or by location, system is throwing the following ERROR.
    "Fiscal year change not yet made for company code 1001
    Message no. AB059
    Diagnosis
    You have not yet carried out a fiscal year change for company code 1001, although the current system date is in the new fiscal year.
    Procedure
    Carry out the fiscal year change for company code 1001.
    Proceed"
    Now my doubt is " Why system is throwing error for a fiscal year change"? I am only viewing the calander year 2007 data as an asset balance display. infact no data has been posted for january - 2008 as yet.
    When i am viewing the Asset balance display for 2007, why should system thorw an error ? If the system is correct, then what am i supposed to do ?
    I REQUEST ALL THE  SAP GURUS, TO HELP ME IN THIS REGARD AND SUTIABLE POINTS WILL BE AWARDED.
    Thanks & Regards
    Rishikesh
    I REQUEST YOU ALL SAP GURUS TO HELP

    Hi,
    although this question was posted a year ago, it is a recurring problem. If you need to know more about fiscal year change in asset accounting, look at http://www.siliconlabs.fi/files/AA_YearEndClosing.pdf.
    Ritva

  • Populate cost centre in IT 2001 via Leave application submitted through ESS

    Gurus,
    we have a scenario to populate CC in "Cost Assignment" Tab of IT 2001, when a leave is submitted via ESS. Now we have enabled the additional fileds on ESS and when leave application iView is opened, the CC field is displayed and is defaulted with a CC through an User Exit. But when this leave is approved and posted to IT 2001, the Cost Assignment tab is not populated. However the CC value is very much available in the intermediate table "ptarq_extra_info".
    Basically, the CC to be stored in table ASSOB ASSHR.
    Many thanks.
    Sid

    Gurus,
    we have a scenario to populate CC in "Cost Assignment" Tab of IT 2001, when a leave is submitted via ESS. Now we have enabled the additional fileds on ESS and when leave application iView is opened, the CC field is displayed and is defaulted with a CC through an User Exit. But when this leave is approved and posted to IT 2001, the Cost Assignment tab is not populated. However the CC value is very much available in the intermediate table "ptarq_extra_info".
    Basically, the CC to be stored in table ASSOB ASSHR.
    Many thanks.
    Sid

Maybe you are looking for