Error in Letter of Credits
Hi All,
I have an issue in identifying the delivery documents which has created an impact in LOC financial document.
Financial document Value is 299,415.00 and 2 consignment issue documents has been created with value of 149,707.50 (each order). Only partial delivery and invoice has been done for both the orders with value: 136,372 and one delivery document with amount 81489.18 needs to be invoiced.
So Total FD value is 299415.00
Already Invoiced value: 136372
Delivery document to be invoiced value is 81489.18 but the consumption in FD document shows 128177.93 against the delivery.
When I analyzed the system no open delivery documents is found other than one mentioned above, I just want to find the delivery document which consumed the value 46688.75.
Screenshot of FD document attached. Please help me to find out. I checked the T-code: VAX1 to identify the document nos linked to FD but none of those document has created impact.
Regards,
Mythily
I just want to find the delivery document which consumed the value 46688.75.
You need to check the delivery to the tune of 128177.93 and not the above value according to me based on the following calculations:-
The screen shot shows the above Open Value. So you need to check how many deliveries are generated for that particular customer out of which,
how many are not PGId
how many are PGId but not invoiced
G. Lakshmipathi
Similar Messages
-
update my iphone 4 and when I go to restore I get Error -50, let me know as I do that without asking for the support that made itunes
currently I have no information on the phone and I need contacts urgetenIf the previous owner bought the apps then they would have to be updated using his/her account. The apps are not yours. You would need to buy your own.
-
A/R Down Payments to Draw Error due to partially credited
Thank you in advance for your help - here is my question:
I have started with a Sales Order of $20,000. I then made an A/R Down Payment Invoice for $5,000. When payment came in, it was in the amount of $4,980 so I credited this amount towards the A/R Down Payment Invoice which left a balance of $20. I then went to make an A/R Invoice for the balance of $15,020 but it would not let me use the "Down Payments to Draw" - presumably because the A/R Down Payment Invoice was still Open. Therefore, I went ahead and issued a credit memo to the customer for the $20. I was then able to use the "Down Payments to Draw" from the A/R Invoice to view my A/R Down Payment but when I clicked on the row, I received the following message:
11/01/2009 15:50:55: This document was partially credited [Message 60511-3]
I have not found a way to bring in the payment of $4,980 or how to appropriately adjust my A/R Invoice for the correct amount. Thank you for your advice on what i did wrong or what I can do now to allow me to reflect the money received in the A/R Invoice.
Here is my SAP version information:
SAP Business One 2007 A (8.00.177) SP:00 PL:38Hi Jeff,
please see this wiki article from the November 2008 edition of the Expert on Phone Newsletter:
[How to deal with a partially credited down payment invoice? |https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=64389447]
All the best,
kerstin -
Lost photos and other errors, Complaint letter
I would like to send Apple a formal complaint letter letting them know how greatly disappointed I am with their products. I was a great fan of Apple and I was even considering buying a new Mac but I am no longer so sure.
For a while I dealt with MobileMe Calendar crashing constantly while trying to enter meetings and other important events. I just figured that they would get to it sooner or later. I have lived with the fact that my iPhone and my iPad lose the wifi connection they have constantly without any logical reason. I have ignored the fact that I cannot use many webpages on my iPhone or my iPad that use flash (including pages the US Army has) or are just not compatible like many realestate MLS search sites, I have watched as iTunes crashed and froze many times on my computer, and I have even put up with the fact that backing up my iPhone can take in excess sometimes of 8 hours.
But today I think I have had it finally, I lost photos that I had taken of my 1 week old daughter born July 1st; as well as photos from the US Army Black Hawk flight training course (I am a Uh-60 pilot in the Army). These were photos that I thought had been backed up on my computer by iTunes, these were photo's that I can never get back now, these are memories that I had wanted to keep. For many years before I joined the Army I was a computer systems engineer and I have a B.S. in Computer Info Sys; so I know how to use a computer lets not assume that the error is on the user behalf in this instance.
Thanks to Apple and thier team of programmers, I have lost some very importnat memories that I can never get back. I am sure any parent or soldier that has lost photos like these would agree there is no excuse, especially when you did everything the way you thought it should have been done. I am more than a little angry that Apple cant seem to get it right when it comes to iTunes and the iPhone, if they want people to use the product then make it work so they don't lose things like I have.
Does any know of an Apple email address that I should send this to with someone that would care on the other end? I am just very disappointed and want to be heard.
From,
A Very Disappointed Army Parenthttp://www.apple.com/feedback/iphone.html
-
Not enough storage space error. wont let me back up
When my 4S attempts to automatically back up I get an error message saying there is not enough storage space. I'd like to see whats taking up the space on the cloud, but when I access the cloud, theres NOTHING that could be taking up that much space! (contacts, notes, calendar, reminders.) I cant even see my pictures on the cloud. Which are supposed to be backing up... so I'd like to know HOW to access the things I am backing up, and WHY it is saying there is not enough room when there is, and WHAT I can do about it. Please help!
Hello ttclarin,
I think it is trying to tell you that you have used your 5GB of iCloud storage. Check your device for iCloud usage and see how much space you are using there.
-Derrick Lambert -
System Alerts for Bank Guarantees and Letter of Credits
Hi
My requirement is to get system alerts when the the Letter of Credit(LOC) or Bank Guarantee (BG) is going to be expired.
We are using Third Party software for master data and other information related to Letter of credit.
In SAP ,I will do special GL for LOC and assign to Reconciliation Account as per standard.
What is the best practice to get system allert, when ever the date is going to get expired.
Many Thanks In advance
RamaHi,
In case you want to send the last record only, then you can use following qurey
SELECT TOP 1 * FROM DBO.OVPM T0 WHERE T0.CashSum >= 10000 AND DATEDIFF(DD, T0.CreateDate, GetDate()) = 0 ORDER BY T0.CreateDate DESC
then in Alert u can set the frequency as 1 minute.
Hope this helps...
BR
Samir Gandhi -
Bank Guarentees & Letter Of Credits
Hi all
hope evy body is doing good
Guys i need a smal favourl ffrom all of u
1) what are the steps to be followed for The letter of credit & Bank guarentees Configuration
2) what is Audit information system(AIS) in SAP
3) And what is Joint Venture Accounting in SAP & What Exactly it deals with
4) treasury Management with Complete flow
if anybody have the config. steps For the above plz... share
Points will rewarde
Thanks & Regards
Seema.T (Hyderabad)Hi
Bank gtee, Performance gtee and Letter of Credit - all three are statistical postings just like contingent assets or liabilities. It should be excluded from the Financial statement version.
These needs to be entered in the below transaction codes:
F-55 - Vendor statistical posting entry
F-56 - Vendor statistical posting entry reversal
F-38 - Customer statistical posting entry
F-19 - Customer statistical posting entry reversal.
1) For entering this, you need to create a special G/L indicator like bank gtee recd or given, letter of credit recd or given and perf gtee recd or given for customer and vendor in FBKP transaction code.
For creating the special G/L indicator, you need to create recon accounts for these entries in FS00.
2) You need to create an offsetting account and provide open item management ticked and post automatically ticked in FS00 tcode.
Enter the entry in the above transaction codes.
In case of reversal entries, in the G/L account column, enter the alternative recon account which you provided in the special G/L indicator, enter customer/vendor number and document number and click edit line items. Set the line item to active, but selecting "+" from the F4 option and click post. This will reverse the document you have made.
Hope it will help you lot
Regards
Aman
Assign points if useful -
Bank a/c Bank Gurantees and Letter of credits, DD s ?
Hi
Pls explain how bank gurantees and Letter of credit customizin and procee of above field explain me with exampls any documents appreciated
[email protected]
RamsHello Pablo,
I had the same situation in Chile. I had to make the procedure manually because:
- I could not determine with which Banks I was going to use for the LoC
- I don't know the amount to be paid in each LoC
- I don't know the payment terms for each LoC.
- The LoC currency was not always the same
If you solve these problems, may be a Z report which reads the Payment Method and a BAPI for GL document creation could help you, but its very complex.
Kind Regards -
Verity Error - Not letting user search with words NOT,AND,OR, etc. Why??
I've meticulously created collections of the music on my ecommerce music site. I am manually stripping off offending characters in the submitted search criteria with this code:
Trim(REReplaceNoCase(URLDecode(URL.searchcriteria),"[()<>##""'@]"," ","all"))
Then, if the user has ticked for an "exact word" search, I'm adding double quotes around it, otherwise, leaving it without. Then submitting it to the right collection for a search with this code (I've substituted ZZZ and XXX for my protection).
<CFSEARCH NAME="ZZZ" COLLECTION="XXX" type="simple" CRITERIA="#cleanedcriteria#" maxrows="300">
When a user does not tick "exact match" but types in any phrase that includes any of the Verity operators, they get the following error:
If you are using type="explicit", you must use Verity Query Language operators such as "<WORD>" or "<STEM>", or surround your search term with quotes. See the documentation for details.
Pass Me Not
will throw the error. but
"Pass Me Not"
which is passed when someone ticks "exact match" does just fine.
From what I've read, the simple search is supposed to assume the <WORD> and <MANY> operators, but it's like that's being ignored. What am I doing wrong, and/or how can I configure this so that my users can type terms, submit, and find what they're looking for?I think I finally understand, and am posting the solution here for others' benefit.
Apparently the simple search is in fact behaving properly and will recognize AND OR NOT as operators instead of part of the search string. The work around for this is to enclose those words in double quotes. So that's what I've done. If the user has not specified an "exact match" search (where I enclose the entire string in double quotes), then I single out these three words and put double quotes around them. It appears to work beautifully.
QED, and am happy to have had a complete uninterrupted discussion with myself.
<cfset cleanedcriteria = ReplaceNoCase(cleanedcriteria,"and","""and""","all")>
<cfset cleanedcriteria = ReplaceNoCase(cleanedcriteria,"not","""not""","all")>
<cfset cleanedcriteria = ReplaceNoCase(cleanedcriteria,"or","""or""","all")> -
Error when purchasing Skype credits
Good evening I tried to charge my credit account with the dream and still error showed me but I did not get my money, receiving stolen card about 25 euros. How can that be? Who returning my money back?
These are user-to-user forums, we won't know why, you will need to do as the message tells you and contact iTunes Support - go to that URL : http://www.apple.com/support/itunes/ww/ , click on your country's flag, and then click on Contact Support at the bottom left of the next screen
-
My computer was installing some updates and when everything was done I tried opening up Mozilla Firefox. I couldn't open it and there was an error message that said:
XULRUNNER
Error: Platform version '12.0' is not comparable with
inversion (then there was a greater than sign) (then an equal sign) 11.0
maxVersion (then there was a less than sign) (then an equal sign) 11.0
So I was not able to click on the confirmation email that was sent to me so I'm afraid nobody will help me. Can someone send me an executable file that will work to my computer email? It's (email removed by mod)
I am doing this message to you from my cell phone and it's email is the one associated with Gmail.Don't worry, we will still help you out :) Just click on the confirmation as soon as you can.
Try to start Firefox in [[Safe mode|Safe mode]]. This mode disables all extensions, user customizations, hardware acceleration, etc. temporarily for diagnostic and troubleshooting. If Firefox works fine in Safe Mode, then this is likely an add-on issue. Restart Firefox in normal mode, then type "About:addons" (without the quotes) in the address bar. Disable your extensions one by one, restarting Firefox between each one, until you find the trouble maker. Once you do, you can disable that add-on and report the issue to that add-on's developer.
A few other basic trouble shooting things you can try is this:
Run all Windows Updates, install all needed service packs, etc.
Update your graphics driver (Firefox uses your graphics card for some rendering, and an out of date graphics card driver can cause problems. [https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers].
Update all your plugins (Flash, Java, etc.): [http://www.mozilla.org/plugincheck/ http://www.mozilla.org/plugincheck/].
Download and Install MalwareBytes Anti-Malware, run a full Scan. [http://www.malwarebytes.org/ http://www.malwarebytes.org/]. This helps check that there are no viruses on your computer causing issues. You can uninstall this program after you clean off any infections.
After doing this, try to open Firefox and update to Firefox version 13 -
App store says install error wont let me purchase mountain lion
purchase can not be completed,any ideas whats up with this message?
Check the model number by holding down the option/alt key while selecting About this Mac under the Apple menu. Select System Information and it will tell you the model number. Compare it to:
Model Number - iMac
You can then check against the link mende1 provided.
If you then go with Niel's suggestion, you can check here.
Computer Compatibility - Lion
You also might want to check applications compatibility since neither lion or Mountain Lion support PowerPC applications.
Application Compatibility -
Error while creating a device.
Hi all,
I tried to create a device and when i click on save it is giving an ABAP dump as below.
The following error text was processed in the system M01 : CREATE DATA: The specified type is not a valid data type.
The error occurred on the application server wicomp05_M01_04 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: GET_USERS_FROM_CDS of program CL_SMMW_USER==================CP
Method: FETCH_USER_LIST of program /1BCWDY/005OX851WLQW549Y03TQ==CP
Method: IF_USER_SEARCH~FETCH_USER_LIST of program /1BCWDY/005OX851WLQW549Y03TQ==CP
Method: ONACTIONON_SEARCH of program /1BCWDY/005OX851WLQW549Y03TQ==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/005OX851WLQW549Y03TQ==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
Method: IF_WDR_ACTION~FIRE of program CL_WDR_ACTION=================CP
Method: DO_HANDLE_ACTION_EVENT of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW=================CP
Is it any bug in the system?
I am currently on SP07 stack.
Please help me in resloving this.
Thanks and regards,
RajeshHi Rohit,
We didnt applied any sap note after upgrading to SP07.if there any sap note for this error pls let me know.I read in some thread that we have to re generate the Data Object userdetails in the basis SC.
When i regenerated the satus becam red.
Please find the ST22 dump details.
root_profile_table = ls_cds_list-tablename . |
104
ENDIF.
105
106
ENDLOOP.
107
108
LOOP AT lt_mbo_segm_infm INTO ls_mbo_segm_infm .
109
110
CASE ls_mbo_segm_infm-sfld_orgname .
111
112
WHEN 'LOGIN_NAME' .
113
tbl_fld_login_nm = ls_mbo_segm_infm-sfld_name .
114
WHEN 'FIRST_NAME' .
115
tbl_fld_first_nm = ls_mbo_segm_infm-sfld_name .
116
WHEN 'LAST_NAME' .
117
tbl_fld_last_nm = ls_mbo_segm_infm-sfld_name .
118
WHEN 'LONG_NAME' .
119
tbl_fld_full_nm = ls_mbo_segm_infm-sfld_name .
120
121
ENDCASE.
122
ENDLOOP.
123
124
125
DATA : var1 TYPE bapiusname .
126
DATA: lt_tmp_ref TYPE REF TO data.
127
DATA: ls_tmp_ref TYPE REF TO data.
128
129
FIELD-SYMBOLS : <lt_tmp> TYPE ANY TABLE.
130
FIELD-SYMBOLS : <ls_tmp> TYPE any,
131
<area> TYPE any.
132
>>>>>
CREATE DATA lt_tmp_ref TYPE TABLE OF (root_profile_table).
134
ASSIGN lt_tmp_ref->* TO <lt_tmp>.
135
136
CREATE DATA ls_tmp_ref TYPE (root_profile_table).
137
ASSIGN ls_tmp_ref->* TO <ls_tmp>.
138
139
140
***Search based on the Importing Parameter - I_USER_NAME ******
141
lv_login_name = i_user_name .
142
lv_first_name = i_first_name .
143
lv_last_name = i_last_name .
144
145
wildcard_flag = ''.
146
REPLACE ALL OCCURRENCES OF '*' IN lv_login_name WITH '%'.
147
IF sy-subrc EQ 0.
148
wildcard_flag = 'X'.
149
ENDIF.
150
REPLACE ALL OCCURRENCES OF '*' IN lv_first_name WITH '%'.
151
IF sy-subrc EQ 0.
| 152| wildcard_flag = 'X'.
Thanks and regards,
rajesh -
[Solved] HP Omen 15 - Slow SSD after IRQ 16 error
[EDIT]
Sorry for wasting everyone's time. It turned out that I had only tried installing nvidia/bumblebee without the nomodeset option..and apparently that didn't work properly for some reason.
So if anyone else runs into this problem here's the solution:
1) Boot your installation media with the 'nomodeset' kernel option (this is especially important for live images (fedora,ubuntu,...) which are completely unusable otherwise
2) With nomodeset still enabled, install the nvidia driver, bumblebee and bbswitch
4) Enable bumblebeed.service
3) remove the nomodeset option
Also I updated the microcode on the CPU, but as far as I could tell that didn't affect anything.
[/EDIT]
Hi everyone,
I bought a new HP Omen 15 laptop. In Windows everything runs fine, but on Linux I get an IRQ 16 error after which SSD reads become so painfully slow that the system becomes mostly unusable. This issue has been posted by someone on the Ubuntu forums, but nobody had a solution there.
Hopefully one of you will be able to help me, because right now I'm stuck on Windows for doing my work...and I get absolutely no joy out of that
Hardware:
i7-4710HQ
Nvidia GeForce GTX 860 and Intel® HD Graphics 4600
512GB Samsung XP941 SSD (M.2)
Currently the system dual-boots with Windows 8.1, secure boot disabled, using gummiboot on the windows UEFI partition.
The actual error that (I think) leads to the performance hit is
[ 13.608625] 0000000000000000 96859b6ad089d33d ffff88045f243e28 ffffffff8154fb74
[ 13.608632] 0000000000000000 ffff880083514e00 ffff88045f243e58 ffffffff810cd406
[ 13.608637] 000000013ffeb056 ffff880083514e00 0000000000000000 0000000000000010
[ 13.608643] Call Trace:
[ 13.608646] <IRQ> [<ffffffff8154fb74>] dump_stack+0x4e/0x71
[ 13.608665] [<ffffffff810cd406>] __report_bad_irq+0x36/0xd0
[ 13.608671] [<ffffffff810cd7b7>] note_interrupt+0x257/0x2a0
[ 13.608677] [<ffffffff810cacee>] handle_irq_event_percpu+0xae/0x1f0
[ 13.608682] [<ffffffff810cae71>] handle_irq_event+0x41/0x70
[ 13.608689] [<ffffffff810cdd47>] handle_fasteoi_irq+0x87/0x140
[ 13.608698] [<ffffffff81017362>] handle_irq+0x22/0x40
[ 13.608704] [<ffffffff815581b1>] do_IRQ+0x51/0xf0
[ 13.608711] [<ffffffff815561ad>] common_interrupt+0x6d/0x6d
[ 13.608714] <EOI> [<ffffffff81403aa5>] ? cpuidle_enter_state+0x65/0x1a0
[ 13.608730] [<ffffffff81403a91>] ? cpuidle_enter_state+0x51/0x1a0
[ 13.608737] [<ffffffff81403cc7>] cpuidle_enter+0x17/0x20
[ 13.608745] [<ffffffff810b3539>] cpu_startup_entry+0x3d9/0x460
[ 13.608752] [<ffffffff8104a994>] start_secondary+0x1b4/0x1f0
[ 13.608756] handlers:
[ 13.608809] [<ffffffffa0128410>] ahci_single_irq_intr [libahci]
[ 13.608873] Disabling IRQ #16
What's interesting is, that this problem does not occur if I set the 'nomodeset' kernel option. So probably it's somehow related to graphics. The performance drop is quite visible:
With nomodeset:
hdparm -Tt --verbose /dev/sda
/dev/sda:
Timing cached reads: 21006 MB in 2.00 seconds = 10513.48 MB/sec
Timing buffered disk reads: 2378 MB in 3.00 seconds = 792.36 MB/sec
...and without:
hdparm -Tt --verbose /dev/sda
/dev/sda:
Timing cached reads: 12274 MB in 2.00 seconds = 6140.85 MB/sec
Timing buffered disk reads: 8 MB in 3.20 seconds = 2.50 MB/sec
So just about 0.3% of the original speed.
The above information are form a fresh install without any additional packages installed. Installing nvidia/intel/bumblebee did not help either, so I've left it in the fresh state to be debuggable.
Here are various outputs from some commands that might be useful to determine the error source, let me know if you need anything else!
hdparm /dev/sda
/dev/sda:
multcount = 0 (off)
IO_support = 1 (32-bit)
readonly = 0 (off)
readahead = 256 (on)
geometry = 62260/255/63, sectors = 1000215216, start = 0
lspci
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05)
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5)
00:1c.4 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #5 (rev d5)
00:1c.5 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #6 (rev d5)
00:1f.0 ISA bridge: Intel Corporation HM87 Express LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05)
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)
01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 860M] (rev a2)
07:00.0 SATA controller: Samsung Electronics Co Ltd XP941 PCIe SSD (rev 01)
08:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader (rev 01)
09:00.0 Network controller: Intel Corporation Wireless 7260 (rev c3)
cat /proc/interrupts
CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7
0: 24 0 0 0 0 0 0 0 IR-IO-APIC-edge timer
1: 901 2 2 1 3 1 1 0 IR-IO-APIC-edge i8042
8: 1 0 0 0 0 0 0 0 IR-IO-APIC-edge rtc0
9: 199 49 37 75 13 25 6 18 IR-IO-APIC-fasteoi acpi
12: 4419 17 5 8 2 6 7 7 IR-IO-APIC-edge i8042
16: 3146 195401 312 395 353 184 102 108 IR-IO-APIC 16-fasteoi 0000:07:00.0
24: 0 0 0 0 0 0 0 0 DMAR_MSI-edge dmar0
25: 0 0 0 0 0 0 0 0 DMAR_MSI-edge dmar1
26: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge PCIe PME
27: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge PCIe PME
28: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge PCIe PME
29: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge PCIe PME
30: 6 1 2 9 1 0 1 2 IR-PCI-MSI-edge rtsx_pci
31: 574 190 28 34 154 29 11 7 IR-PCI-MSI-edge xhci_hcd
32: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge 0000:00:1f.2
33: 1 0 0 0 0 0 3 7 IR-PCI-MSI-edge mei_me
34: 5 138 79 0 5 76 10 0 IR-PCI-MSI-edge snd_hda_intel
35: 169 0 1 0 1 0 0 0 IR-PCI-MSI-edge i915
36: 17 3 2 7 6 14 2 11 IR-PCI-MSI-edge iwlwifi
37: 1 26 0 0 32 0 0 0 IR-PCI-MSI-edge snd_hda_intel
NMI: 0 0 0 0 0 0 0 0 Non-maskable interrupts
LOC: 958 2678 1069 355 1505 562 682 321 Local timer interrupts
SPU: 0 0 0 0 0 0 0 0 Spurious interrupts
PMI: 0 0 0 0 0 0 0 0 Performance monitoring interrupts
IWI: 1 1 0 1 0 0 0 0 IRQ work interrupts
RTR: 0 0 0 0 0 0 0 0 APIC ICR read retries
RES: 204 193 207 200 136 177 195 285 Rescheduling interrupts
CAL: 898 819 847 830 822 853 843 869 Function call interrupts
TLB: 10 6 8 3 4 7 3 5 TLB shootdowns
TRM: 0 0 0 0 0 0 0 0 Thermal event interrupts
THR: 0 0 0 0 0 0 0 0 Threshold APIC interrupts
MCE: 0 0 0 0 0 0 0 0 Machine check exceptions
MCP: 2 2 2 2 2 2 2 2 Machine check polls
HYP: 0 0 0 0 0 0 0 0 Hypervisor callback interrupts
ERR: 0
MIS: 0
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.18.6-1-ARCH (builduser@tobias) (gcc version 4.9.2 20141224 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015
[ 0.000000] Command line: initrd=\initramfs-linux.img root=/dev/mapper/VolGroup00-lv_root rw
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009c07efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009c07f000-0x000000009ce7efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009ce7f000-0x000000009cf7efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009cf7f000-0x000000009cffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009f9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000045f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x78e8e018-0x78ea7657] usable ==> usable
[ 0.000000] e820: update [mem 0x78e7d018-0x78e8d057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000006efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000006f000-0x000000000006ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000070000-0x0000000000087fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000078e7d017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000078e7d018-0x0000000078e8d057] usable
[ 0.000000] reserve setup_data: [mem 0x0000000078e8d058-0x0000000078e8e017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000078e8e018-0x0000000078ea7657] usable
[ 0.000000] reserve setup_data: [mem 0x0000000078ea7658-0x000000009c07efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009c07f000-0x000000009ce7efff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000009ce7f000-0x000000009cf7efff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000009cf7f000-0x000000009cffefff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x000000009cfff000-0x000000009cffffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009d000000-0x000000009f9fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000045f5fffff] usable
[ 0.000000] efi: EFI v2.31 by INSYDE Corp.
[ 0.000000] efi: ACPI=0x9cffe000 ACPI 2.0=0x9cffe014 SMBIOS=0x9ce7df18
[ 0.000000] efi: mem00: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000000000000-0x0000000000001000) (0MB)
[ 0.000000] efi: mem01: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000000001000-0x0000000000007000) (0MB)
[ 0.000000] efi: mem02: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000007000-0x000000000006f000) (0MB)
[ 0.000000] efi: mem03: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000000006f000-0x0000000000070000) (0MB)
[ 0.000000] efi: mem04: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000070000-0x0000000000088000) (0MB)
[ 0.000000] efi: mem05: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x0000000000088000-0x000000000009f000) (0MB)
[ 0.000000] efi: mem06: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000000009f000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem07: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000100000-0x0000000001000000) (15MB)
[ 0.000000] efi: mem08: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000001000000-0x0000000001e3b000) (14MB)
[ 0.000000] efi: mem09: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000001e3b000-0x0000000078680000) (1896MB)
[ 0.000000] efi: mem10: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000078680000-0x00000000786a0000) (0MB)
[ 0.000000] efi: mem11: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000786a0000-0x0000000078e7d000) (7MB)
[ 0.000000] efi: mem12: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000078e7d000-0x0000000078ea8000) (0MB)
[ 0.000000] efi: mem13: [Loader Code | | | | | |WB|WT|WC|UC] range=[0x0000000078ea8000-0x000000007ace3000) (30MB)
[ 0.000000] efi: mem14: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000007ace3000-0x000000007b670000) (9MB)
[ 0.000000] efi: mem15: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000007b670000-0x000000007b67a000) (0MB)
[ 0.000000] efi: mem16: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000007b67a000-0x000000007b67f000) (0MB)
[ 0.000000] efi: mem17: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000007b67f000-0x000000007b865000) (1MB)
[ 0.000000] efi: mem18: [Loader Code | | | | | |WB|WT|WC|UC] range=[0x000000007b865000-0x000000007b87f000) (0MB)
[ 0.000000] efi: mem19: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000007b87f000-0x000000007f7d2000) (63MB)
[ 0.000000] efi: mem20: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000007f7d2000-0x000000008001a000) (8MB)
[ 0.000000] efi: mem21: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000008001a000-0x0000000081106000) (16MB)
[ 0.000000] efi: mem22: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081106000-0x00000000815f5000) (4MB)
[ 0.000000] efi: mem23: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000815f5000-0x000000008161b000) (0MB)
[ 0.000000] efi: mem24: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000008161b000-0x0000000081659000) (0MB)
[ 0.000000] efi: mem25: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081659000-0x00000000819e1000) (3MB)
[ 0.000000] efi: mem26: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000819e1000-0x00000000819e2000) (0MB)
[ 0.000000] efi: mem27: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000819e2000-0x00000000819fe000) (0MB)
[ 0.000000] efi: mem28: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000819fe000-0x0000000081a04000) (0MB)
[ 0.000000] efi: mem29: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081a04000-0x0000000081a0c000) (0MB)
[ 0.000000] efi: mem30: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081a0c000-0x0000000081a0d000) (0MB)
[ 0.000000] efi: mem31: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081a0d000-0x0000000081a38000) (0MB)
[ 0.000000] efi: mem32: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081a38000-0x0000000081a3a000) (0MB)
[ 0.000000] efi: mem33: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081a3a000-0x0000000081b48000) (1MB)
[ 0.000000] efi: mem34: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081b48000-0x0000000081b49000) (0MB)
[ 0.000000] efi: mem35: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081b49000-0x0000000081bcc000) (0MB)
[ 0.000000] efi: mem36: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081bcc000-0x0000000081bd4000) (0MB)
[ 0.000000] efi: mem37: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081bd4000-0x0000000081bd5000) (0MB)
[ 0.000000] efi: mem38: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081bd5000-0x0000000081bd7000) (0MB)
[ 0.000000] efi: mem39: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081bd7000-0x0000000081bd8000) (0MB)
[ 0.000000] efi: mem40: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081bd8000-0x0000000081bd9000) (0MB)
[ 0.000000] efi: mem41: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081bd9000-0x0000000081c1b000) (0MB)
[ 0.000000] efi: mem42: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081c1b000-0x0000000081c1c000) (0MB)
[ 0.000000] efi: mem43: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081c1c000-0x0000000081c20000) (0MB)
[ 0.000000] efi: mem44: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081c20000-0x0000000081c22000) (0MB)
[ 0.000000] efi: mem45: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081c22000-0x0000000081c2d000) (0MB)
[ 0.000000] efi: mem46: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081c2d000-0x0000000081c30000) (0MB)
[ 0.000000] efi: mem47: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081c30000-0x0000000081c52000) (0MB)
[ 0.000000] efi: mem48: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081c52000-0x0000000081c53000) (0MB)
[ 0.000000] efi: mem49: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081c53000-0x0000000081c76000) (0MB)
[ 0.000000] efi: mem50: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081c76000-0x0000000081c77000) (0MB)
[ 0.000000] efi: mem51: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081c77000-0x0000000081c78000) (0MB)
[ 0.000000] efi: mem52: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081c78000-0x0000000081c7a000) (0MB)
[ 0.000000] efi: mem53: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081c7a000-0x000000008387f000) (28MB)
[ 0.000000] efi: mem54: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000008387f000-0x000000009bc0e000) (387MB)
[ 0.000000] efi: mem55: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x000000009bc0e000-0x000000009c07f000) (4MB)
[ 0.000000] efi: mem56: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x000000009c07f000-0x000000009c47f000) (4MB)
[ 0.000000] efi: mem57: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x000000009c47f000-0x000000009c67f000) (2MB)
[ 0.000000] efi: mem58: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000009c67f000-0x000000009ce7f000) (8MB)
[ 0.000000] efi: mem59: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x000000009ce7f000-0x000000009cf7f000) (1MB)
[ 0.000000] efi: mem60: [ACPI Reclaim Memory| | | | | |WB|WT|WC|UC] range=[0x000000009cf7f000-0x000000009cfff000) (0MB)
[ 0.000000] efi: mem61: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009cfff000-0x000000009d000000) (0MB)
[ 0.000000] efi: mem62: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000100000000-0x000000045f600000) (13814MB)
[ 0.000000] efi: mem63: [Reserved | | | | | | | | | ] range=[0x00000000000a0000-0x00000000000c0000) (0MB)
[ 0.000000] efi: mem64: [Reserved | | | | | | | | | ] range=[0x000000009d000000-0x000000009fa00000) (42MB)
[ 0.000000] efi: mem65: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000e0000000-0x00000000f0000000) (256MB)
[ 0.000000] efi: mem66: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000feb00000-0x00000000feb10000) (0MB)
[ 0.000000] efi: mem67: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem68: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed00000-0x00000000fed1c000) (0MB)
[ 0.000000] efi: mem69: [Memory Mapped I/O |RUN| | | | | | | | ] range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem70: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed20000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem71: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000ffb00000-0x0000000100000000) (5MB)
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: Hewlett-Packard HP OMEN Notebook PC 15/2332, BIOS F.09 12/27/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x45f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7800000000 write-back
[ 0.000000] 1 base 009D000000 mask 7FFF000000 uncachable
[ 0.000000] 2 base 009E000000 mask 7FFE000000 uncachable
[ 0.000000] 3 base 00A0000000 mask 7FE0000000 uncachable
[ 0.000000] 4 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0x9d000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000082000] 82000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[ 0.000000] BRK [0x01b38000, 0x01b38fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x45f400000-0x45f5fffff]
[ 0.000000] [mem 0x45f400000-0x45f5fffff] page 2M
[ 0.000000] BRK [0x01b39000, 0x01b39fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x45c000000-0x45f3fffff]
[ 0.000000] [mem 0x45c000000-0x45f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x400000000-0x45bffffff]
[ 0.000000] [mem 0x400000000-0x43fffffff] page 1G
[ 0.000000] [mem 0x440000000-0x45bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x9c07efff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0x9bffffff] page 2M
[ 0.000000] [mem 0x9c000000-0x9c07efff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x9cfff000-0x9cffffff]
[ 0.000000] [mem 0x9cfff000-0x9cffffff] page 4k
[ 0.000000] BRK [0x01b3a000, 0x01b3afff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[ 0.000000] [mem 0x100000000-0x3ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x7f7d2000-0x80019fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000009CFFE014 000024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 0x000000009CFFE210 0000F4 (v01 HPQOEM SLIC-MPC 00000001 HP 01000013)
[ 0.000000] ACPI: FACP 0x000000009CFF7000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: DSDT 0x000000009CFDB000 018700 (v02 HPQOEM SLIC-MPC 00000000 ACPI 00040000)
[ 0.000000] ACPI: FACS 0x000000009CF67000 000040
[ 0.000000] ACPI: TCPA 0x000000009CFFD000 000032 (v02 HPQOEM INSYDE 00000000 HP 00040000)
[ 0.000000] ACPI: UEFI 0x000000009CFFC000 000236 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: FPDT 0x000000009CFFA000 000044 (v01 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: MSDM 0x000000009CFF9000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: ASF! 0x000000009CFF8000 0000A5 (v32 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: HPET 0x000000009CFF6000 000038 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: APIC 0x000000009CFF5000 00008C (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: MCFG 0x000000009CFF4000 00003C (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: WDAT 0x000000009CFDA000 000224 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFD9000 0007F6 (v01 HPQOEM INSYDE 00001000 ACPI 00040000)
[ 0.000000] ACPI: BOOT 0x000000009CFD7000 000028 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: LPIT 0x000000009CFD6000 000094 (v01 HPQOEM INSYDE 00000000 HP 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFD5000 0003E1 (v01 HPQOEM INSYDE 00001000 ACPI 00040000)
[ 0.000000] ACPI: ASPT 0x000000009CFD4000 000034 (v07 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: DBGP 0x000000009CFD3000 000034 (v01 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFCB000 000539 (v01 HPQOEM INSYDE 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFCA000 000AD8 (v01 HPQOEM INSYDE 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFC6000 003361 (v01 HPQOEM INSYDE 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFBE000 003FC4 (v01 HPQOEM INSYDE 00001000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFC5000 00040A (v01 HPQOEM INSYDE 00001000 ACPI 00040000)
[ 0.000000] ACPI: WDTT 0x000000009CFC4000 000224 (v02 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFC3000 00006B (v01 HPQOEM INSYDE 00001000 ACPI 00040000)
[ 0.000000] ACPI: BGRT 0x000000009CFC2000 000038 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: TPM2 0x000000009CFBD000 000044 (v03 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: DMAR 0x000000009CFBC000 0000A8 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000045f5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x45f5fa000-0x45f5fdfff]
[ 0.000000] [ffffea0000000000-ffffea00117fffff] PMD -> [ffff88044ec00000-ffff88045ebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x45f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0006efff]
[ 0.000000] node 0: [mem 0x00070000-0x00087fff]
[ 0.000000] node 0: [mem 0x00100000-0x9c07efff]
[ 0.000000] node 0: [mem 0x9cfff000-0x9cffffff]
[ 0.000000] node 0: [mem 0x100000000-0x45f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x45f5fffff]
[ 0.000000] On node 0 totalpages: 4175366
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3974 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9922 pages used for memmap
[ 0.000000] DMA32 zone: 635008 pages, LIFO batch:31
[ 0.000000] Normal zone: 55256 pages used for memmap
[ 0.000000] Normal zone: 3536384 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0x9da00000-0x9f9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x78e7d000-0x78e7dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x78e8d000-0x78e8dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x78e8e000-0x78e8efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x78ea7000-0x78ea7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9c07f000-0x9ce7efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9ce7f000-0x9cf7efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9cf7f000-0x9cffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9d000000-0x9f9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
[ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88045f200000 s82880 r8192 d31808 u262144
[ 0.000000] pcpu-alloc: s82880 r8192 d31808 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4110103
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=\initramfs-linux.img root=/dev/mapper/VolGroup00-lv_root rw
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16285004K/16701464K available (5481K kernel code, 908K rwdata, 1720K rodata, 1160K init, 1184K bss, 416460K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:488 0
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2494.211 MHz processor
[ 0.000021] Calibrating delay loop (skipped), value calculated using timer frequency.. 4990.27 BogoMIPS (lpj=8314036)
[ 0.000023] pid_max: default: 32768 minimum: 301
[ 0.000028] ACPI: Core revision 20140926
[ 0.014940] ACPI: All ACPI Tables successfully acquired
[ 0.048477] Security Framework initialized
[ 0.048484] Yama: becoming mindful.
[ 0.049168] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.051306] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.052245] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.052257] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.052448] Initializing cgroup subsys memory
[ 0.052452] Initializing cgroup subsys devices
[ 0.052454] Initializing cgroup subsys freezer
[ 0.052455] Initializing cgroup subsys net_cls
[ 0.052457] Initializing cgroup subsys blkio
[ 0.052472] CPU: Physical Processor ID: 0
[ 0.052473] CPU: Processor Core ID: 0
[ 0.052476] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.053226] mce: CPU supports 9 MCE banks
[ 0.053236] CPU0: Thermal monitoring enabled (TM1)
[ 0.053246] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.053323] Freeing SMP alternatives memory: 20K (ffffffff81a07000 - ffffffff81a0c000)
[ 0.053911] Ignoring BGRT: invalid status 0 (expected 1)
[ 0.055124] ftrace: allocating 20931 entries in 82 pages
[ 0.061596] dmar: Host address width 39
[ 0.061597] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.061601] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[ 0.061602] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.061605] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
[ 0.061606] dmar: RMRR base: 0x0000009cd6f000 end: 0x0000009cd8efff
[ 0.061606] dmar: RMRR base: 0x0000009d800000 end: 0x0000009f9fffff
[ 0.061670] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.061671] HPET id 0 under DRHD base 0xfed91000
[ 0.061671] Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.061783] Enabled IRQ remapping in x2apic mode
[ 0.061784] Enabling x2apic
[ 0.061784] Enabled x2apic
[ 0.061789] Switched APIC routing to cluster x2apic.
[ 0.062206] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.095245] smpboot: CPU0: Intel(R) Core(TM) i7-4710HQ CPU @ 2.50GHz (fam: 06, model: 3c, stepping: 03)
[ 0.095250] TSC deadline timer enabled
[ 0.095266] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.095280] ... version: 3
[ 0.095281] ... bit width: 48
[ 0.095281] ... generic registers: 4
[ 0.095282] ... value mask: 0000ffffffffffff
[ 0.095283] ... max period: 0000ffffffffffff
[ 0.095283] ... fixed-purpose events: 3
[ 0.095284] ... event mask: 000000070000000f
[ 0.118723] x86: Booting SMP configuration:
[ 0.118724] .... node #0, CPUs: #1
[ 0.132727] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.139403] #2 #3 #4 #5 #6 #7
[ 0.253216] x86: Booted up 1 node, 8 CPUs
[ 0.253219] smpboot: Total of 8 processors activated (39923.18 BogoMIPS)
[ 0.259240] devtmpfs: initialized
[ 0.261225] PM: Registering ACPI NVS region [mem 0x9ce7f000-0x9cf7efff] (1048576 bytes)
[ 0.261788] pinctrl core: initialized pinctrl subsystem
[ 0.261821] RTC time: 15:05:14, date: 03/07/15
[ 0.261896] NET: Registered protocol family 16
[ 0.272461] cpuidle: using governor ladder
[ 0.285819] cpuidle: using governor menu
[ 0.285860] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.285861] ACPI: bus type PCI registered
[ 0.285863] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.285923] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.285925] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.286198] PCI: Using configuration type 1 for base access
[ 0.299479] ACPI: Added _OSI(Module Device)
[ 0.299481] ACPI: Added _OSI(Processor Device)
[ 0.299482] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.299483] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.302912] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.305266] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.306241] ACPI: Dynamic OEM Table Load:
[ 0.306250] ACPI: SSDT 0xFFFF880448503800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20131115)
[ 0.319415] ACPI: Dynamic OEM Table Load:
[ 0.319425] ACPI: SSDT 0xFFFF8804485D2000 0005AA (v01 PmRef ApIst 00003000 INTL 20131115)
[ 0.332651] ACPI: Dynamic OEM Table Load:
[ 0.332660] ACPI: SSDT 0xFFFF88044858EE00 000119 (v01 PmRef ApCst 00003000 INTL 20131115)
[ 0.384073] ACPI: Interpreter enabled
[ 0.384081] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
[ 0.384088] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
[ 0.384107] ACPI: (supports S0 S3 S4 S5)
[ 0.384108] ACPI: Using IOAPIC for interrupt routing
[ 0.384130] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.388473] ACPI: Power Resource [PG00] (on)
[ 0.390539] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.390543] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.390880] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.391231] PCI host bridge to bus 0000:00
[ 0.391233] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.391234] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.391236] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.391237] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.391237] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.391238] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.391239] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.391240] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[ 0.391241] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.391242] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.391243] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.391244] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.391245] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.391246] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.391247] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 0.391248] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 0.391248] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[ 0.391249] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
[ 0.391255] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[ 0.391363] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.391390] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.391467] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.391495] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
[ 0.391503] pci 0000:00:02.0: reg 0x10: [mem 0xd1000000-0xd13fffff 64bit]
[ 0.391507] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.391511] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.391611] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.391617] pci 0000:00:03.0: reg 0x10: [mem 0xd1710000-0xd1713fff 64bit]
[ 0.391739] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.391754] pci 0000:00:14.0: reg 0x10: [mem 0xd1700000-0xd170ffff 64bit]
[ 0.391806] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.391878] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.391904] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.391922] pci 0000:00:16.0: reg 0x10: [mem 0xd1718000-0xd171800f 64bit]
[ 0.391977] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.392081] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.392094] pci 0000:00:1b.0: reg 0x10: [mem 0xd1714000-0xd1717fff 64bit]
[ 0.392153] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.392226] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.392251] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.392316] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.392392] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.392418] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
[ 0.392477] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.392552] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.392576] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
[ 0.392635] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.392713] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.392742] pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100
[ 0.392924] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[ 0.392937] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
[ 0.392943] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
[ 0.392950] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
[ 0.392956] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
[ 0.392962] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
[ 0.392968] pci 0000:00:1f.2: reg 0x24: [mem 0xd171b000-0xd171b7ff]
[ 0.393001] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.393092] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.393105] pci 0000:00:1f.3: reg 0x10: [mem 0xd1719000-0xd17190ff 64bit]
[ 0.393121] pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f]
[ 0.393269] pci 0000:01:00.0: [10de:1392] type 00 class 0x030200
[ 0.393285] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xd0ffffff]
[ 0.393301] pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.393317] pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
[ 0.393328] pci 0000:01:00.0: reg 0x24: [io 0x3000-0x307f]
[ 0.393338] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 0.393417] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.399365] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 0.399367] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.399370] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd0ffffff]
[ 0.399373] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
[ 0.399511] pci 0000:07:00.0: [144d:a800] type 00 class 0x010601
[ 0.399581] pci 0000:07:00.0: reg 0x24: [mem 0xd1600000-0xd1601fff]
[ 0.399611] pci 0000:07:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 0.399698] pci 0000:07:00.0: PME# supported from D3hot D3cold
[ 0.399751] pci 0000:07:00.0: System wakeup disabled by ACPI
[ 0.406055] pci 0000:00:1c.0: PCI bridge to [bus 07]
[ 0.406061] pci 0000:00:1c.0: bridge window [mem 0xd1600000-0xd16fffff]
[ 0.406133] pci 0000:08:00.0: [10ec:5227] type 00 class 0xff0000
[ 0.406153] pci 0000:08:00.0: reg 0x10: [mem 0xd1500000-0xd1500fff]
[ 0.406285] pci 0000:08:00.0: supports D1 D2
[ 0.406286] pci 0000:08:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.406316] pci 0000:08:00.0: System wakeup disabled by ACPI
[ 0.412720] pci 0000:00:1c.4: PCI bridge to [bus 08]
[ 0.412725] pci 0000:00:1c.4: bridge window [mem 0xd1500000-0xd15fffff]
[ 0.412836] pci 0000:09:00.0: [8086:08b1] type 00 class 0x028000
[ 0.412890] pci 0000:09:00.0: reg 0x10: [mem 0xd1400000-0xd1401fff 64bit]
[ 0.413128] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
[ 0.413183] pci 0000:09:00.0: System wakeup disabled by ACPI
[ 0.419415] pci 0000:00:1c.5: PCI bridge to [bus 09]
[ 0.419420] pci 0000:00:1c.5: bridge window [mem 0xd1400000-0xd14fffff]
[ 0.419464] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.420118] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.420157] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.420195] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.420233] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.420269] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.420305] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.420341] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.420377] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.420652] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 0.420689] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.420760] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.420762] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.420764] vgaarb: loaded
[ 0.420765] vgaarb: bridge control possible 0000:00:02.0
[ 0.420853] PCI: Using ACPI for IRQ routing
[ 0.425911] PCI: pci_cache_line_size set to 64 bytes
[ 0.425949] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
[ 0.425950] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[ 0.425951] e820: reserve RAM buffer [mem 0x78e7d018-0x7bffffff]
[ 0.425952] e820: reserve RAM buffer [mem 0x78e8e018-0x7bffffff]
[ 0.425953] e820: reserve RAM buffer [mem 0x9c07f000-0x9fffffff]
[ 0.425954] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
[ 0.425955] e820: reserve RAM buffer [mem 0x45f600000-0x45fffffff]
[ 0.426019] NetLabel: Initializing
[ 0.426020] NetLabel: domain hash size = 128
[ 0.426021] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.426028] NetLabel: unlabeled traffic allowed by default
[ 0.426041] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.426044] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.428075] Switched to clocksource hpet
[ 0.431534] pnp: PnP ACPI init
[ 0.431620] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.431622] system 00:00: [io 0xffff] has been reserved
[ 0.431623] system 00:00: [io 0xffff] has been reserved
[ 0.431624] system 00:00: [io 0xffff] has been reserved
[ 0.431625] system 00:00: [io 0x1800-0x18fe] could not be reserved
[ 0.431626] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.431628] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.431656] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.431658] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.431677] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.431703] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.431705] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.431750] pnp 00:04: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[ 0.431766] pnp 00:05: Plug and Play ACPI device, IDs SYN1ed8 SYN1e00 SYN0002 PNP0f13 (active)
[ 0.431848] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.431849] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.431850] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.431852] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.431853] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.431854] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.431855] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.431856] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.431857] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.431858] system 00:06: [mem 0x9fa20000-0x9fa20fff] has been reserved
[ 0.431860] system 00:06: [mem 0x9fa10000-0x9fa1ffff] has been reserved
[ 0.431861] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.432212] pnp: PnP ACPI: found 7 devices
[ 0.438072] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[ 0.438074] pci 0000:07:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[ 0.438102] pci 0000:01:00.0: BAR 6: assigned [mem 0xb2000000-0xb207ffff pref]
[ 0.438103] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 0.438105] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.438107] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd0ffffff]
[ 0.438109] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
[ 0.438112] pci 0000:07:00.0: BAR 6: assigned [mem 0xd1610000-0xd161ffff pref]
[ 0.438113] pci 0000:00:1c.0: PCI bridge to [bus 07]
[ 0.438117] pci 0000:00:1c.0: bridge window [mem 0xd1600000-0xd16fffff]
[ 0.438123] pci 0000:00:1c.4: PCI bridge to [bus 08]
[ 0.438127] pci 0000:00:1c.4: bridge window [mem 0xd1500000-0xd15fffff]
[ 0.438133] pci 0000:00:1c.5: PCI bridge to [bus 09]
[ 0.438137] pci 0000:00:1c.5: bridge window [mem 0xd1400000-0xd14fffff]
[ 0.438143] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.438144] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.438145] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.438146] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.438147] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.438148] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.438149] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[ 0.438150] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.438151] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.438152] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.438153] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.438154] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[ 0.438155] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[ 0.438156] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[ 0.438157] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[ 0.438158] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
[ 0.438159] pci_bus 0000:00: resource 20 [mem 0x9fa00000-0xfeafffff]
[ 0.438160] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.438161] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd0ffffff]
[ 0.438161] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff 64bit pref]
[ 0.438163] pci_bus 0000:07: resource 1 [mem 0xd1600000-0xd16fffff]
[ 0.438164] pci_bus 0000:08: resource 1 [mem 0xd1500000-0xd15fffff]
[ 0.438165] pci_bus 0000:09: resource 1 [mem 0xd1400000-0xd14fffff]
[ 0.438182] NET: Registered protocol family 2
[ 0.438329] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.438470] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.438574] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.438585] TCP: reno registered
[ 0.438597] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.438635] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.438690] NET: Registered protocol family 1
[ 0.438701] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.440063] PCI: CLS 64 bytes, default 64
[ 0.440092] Unpacking initramfs...
[ 0.535471] Freeing initrd memory: 8480K (ffff88007f7d2000 - ffff88008001a000)
[ 0.535494] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.535496] software IO TLB [mem 0x97c0e000-0x9bc0e000] (64MB) mapped at [ffff880097c0e000-ffff88009bc0dfff]
[ 0.535525] Simple Boot Flag at 0x44 set to 0x1
[ 0.535703] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.535742] microcode: CPU0 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.535747] microcode: CPU1 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.535753] microcode: CPU2 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.535759] microcode: CPU3 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.535764] microcode: CPU4 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.535770] microcode: CPU5 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.535775] microcode: CPU6 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.535781] microcode: CPU7 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.535821] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 0.535836] Scanning for low memory corruption every 60 seconds
[ 0.536021] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.536041] Initialise system trusted keyring
[ 0.536249] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.537029] zpool: loaded
[ 0.537031] zbud: loaded
[ 0.537161] VFS: Disk quotas dquot_6.5.2
[ 0.537181] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.537256] msgmni has been set to 31953
[ 0.537287] Key type big_key registered
[ 0.537431] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.537471] io scheduler noop registered
[ 0.537473] io scheduler deadline registered
[ 0.537490] io scheduler cfq registered (default)
[ 0.537616] pcieport 0000:00:01.0: irq 26 for MSI/MSI-X
[ 0.537711] pcieport 0000:00:1c.0: irq 27 for MSI/MSI-X
[ 0.537809] pcieport 0000:00:1c.4: irq 28 for MSI/MSI-X
[ 0.537906] pcieport 0000:00:1c.5: irq 29 for MSI/MSI-X
[ 0.537967] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.537968] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.537970] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.537981] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.537982] pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
[ 0.537986] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.537996] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.537997] pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
[ 0.538000] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 0.538010] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 0.538011] pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
[ 0.538014] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[ 0.538023] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.538035] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.538055] efifb: probing for efifb
[ 0.538070] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90011c00000, using 8100k, total 8100k
[ 0.538071] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 0.538071] efifb: scrolling: redraw
[ 0.538072] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.541482] Console: switching to colour frame buffer device 240x67
[ 0.544794] fb0: EFI VGA frame buffer device
[ 0.544800] intel_idle: MWAIT substates: 0x42120
[ 0.544801] intel_idle: v0.4 model 0x3C
[ 0.544801] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.545023] GHES: HEST is not enabled!
[ 0.545063] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.545351] Linux agpgart interface v0.103
[ 0.545389] rtc_cmos 00:02: RTC can wake from S4
[ 0.545490] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.545516] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.545524] Intel P-state driver initializing.
[ 0.545680] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.545994] TCP: cubic registered
[ 0.546216] NET: Registered protocol family 10
[ 0.546732] NET: Registered protocol family 17
[ 0.547560] Loading compiled-in X.509 certificates
[ 0.547591] registered taskstats version 1
[ 0.548780] Magic number: 7:609:82
[ 0.548952] rtc_cmos 00:02: setting system clock to 2015-03-07 15:05:15 UTC (1425740715)
[ 0.549136] PM: Hibernation image not present or could not be loaded.
[ 0.551123] Freeing unused kernel memory: 1160K (ffffffff818e5000 - ffffffff81a07000)
[ 0.551126] Write protecting the kernel read-only data: 8192k
[ 0.555482] Freeing unused kernel memory: 652K (ffff88000155d000 - ffff880001600000)
[ 0.557272] Freeing unused kernel memory: 328K (ffff8800017ae000 - ffff880001800000)
[ 0.570421] random: systemd-tmpfile urandom read with 5 bits of entropy available
[ 0.584356] device-mapper: uevent: version 1.0.3
[ 0.584470] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: [email protected]
[ 0.597541] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.602695] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.602710] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.603099] rtsx_pci 0000:08:00.0: irq 30 for MSI/MSI-X
[ 0.603111] rtsx_pci 0000:08:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 30
[ 0.604239] ACPI: bus type USB registered
[ 0.604267] usbcore: registered new interface driver usbfs
[ 0.604273] SCSI subsystem initialized
[ 0.604279] usbcore: registered new interface driver hub
[ 0.604330] usbcore: registered new device driver usb
[ 0.605601] libata version 3.00 loaded.
[ 0.605678] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.605685] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.605779] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.605808] xhci_hcd 0000:00:14.0: irq 31 for MSI/MSI-X
[ 0.606024] hub 1-0:1.0: USB hub found
[ 0.606063] hub 1-0:1.0: 14 ports detected
[ 0.609623] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.609626] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.609780] hub 2-0:1.0: USB hub found
[ 0.609795] hub 2-0:1.0: 6 ports detected
[ 0.610944] ahci 0000:00:1f.2: version 3.0
[ 0.611066] ahci 0000:00:1f.2: irq 32 for MSI/MSI-X
[ 0.611083] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.611102] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
[ 0.611105] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst
[ 0.611516] scsi host0: ahci
[ 0.611639] scsi host1: ahci
[ 0.611727] scsi host2: ahci
[ 0.611822] scsi host3: ahci
[ 0.611861] ata1: SATA max UDMA/133 abar m2048@0xd171b000 port 0xd171b100 irq 32
[ 0.611863] ata2: DUMMY
[ 0.611864] ata3: DUMMY
[ 0.611865] ata4: DUMMY
[ 0.621966] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.624998] ahci 0000:07:00.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 0.625001] ahci 0000:07:00.0: flags: 64bit ncq led clo only pio ccc
[ 0.625238] scsi host4: ahci
[ 0.625288] ata5: SATA max UDMA/133 abar m8192@0xd1600000 port 0xd1600100 irq 16
[ 0.808604] xhci_hcd 0000:00:14.0: Error while assigning device slot ID
[ 0.808642] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host supports is 32.
[ 0.808673] usb usb2-port2: couldn't allocate usb_device
[ 0.808738] xhci_hcd 0000:00:14.0: Error while assigning device slot ID
[ 0.808768] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host supports is 32.
[ 0.808798] usb usb2-port6: couldn't allocate usb_device
[ 0.932036] ata1: SATA link down (SStatus 0 SControl 300)
[ 0.952070] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.952367] ata5.00: ATA-9: SAMSUNG MZHPU512HCGL-000H1, UXM62H1Q, max UDMA/133
[ 0.952370] ata5.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.952660] ata5.00: configured for UDMA/133
[ 0.952785] scsi 4:0:0:0: Direct-Access ATA SAMSUNG MZHPU512 2H1Q PQ: 0 ANSI: 5
[ 0.955003] sd 4:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/476 GiB)
[ 0.955028] sd 4:0:0:0: [sda] Write Protect is off
[ 0.955030] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.955038] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.956407] sda: sda1 sda2 sda3 sda4 sda5
[ 0.956825] sd 4:0:0:0: [sda] Attached SCSI disk
[ 0.968695] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[ 1.302451] usb 1-4: new high-speed USB device number 3 using xhci_hcd
[ 1.539371] tsc: Refined TSC clocksource calibration: 2494.224 MHz
[ 1.646163] usb 1-13: new full-speed USB device number 4 using xhci_hcd
[ 1.718430] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.821454] usb 1-13: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.972758] systemd[1]: systemd 218 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
[ 1.972914] systemd[1]: Detected architecture 'x86-64'.
[ 1.973342] systemd[1]: Set hostname to <hp_arch>.
[ 2.046Sorry should have mentioned that. Yeah I tried that and it delays the error message a little bit (about 20 seconds after boot vs instantly). In the end it leads to the exact same error though.
-
Error in Applying Java support packages through JSPM
Hi All,
While Applying support packages, Package CAF 7.00 SP 13 is through an error
help required.
For detailed information see the log file of the Deploy Service.
07/12/05 21:55:26 - ***********************************************************
Dec 5, 2007 9:55:26 PM Info: End of log messages of the target system.
Dec 5, 2007 9:55:26 PM Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
Dec 5, 2007 9:55:26 PM Error: Aborted: development component 'caf/UI/ptn/common'/'sap.com'/'MAIN_APL70VAL_C'/'1497914'/'0', grouped by software component 'CAF'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.13.0.20070809092315''/'0':
Caught exception during application deployment from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Cannot deploy application sap.com/cafUIptn~common..
Reason: Clusterwide exception: Failed to deploy application sap.com/cafUIptn~common. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?; nested exception is:
com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application sap.com/cafUIptn~common. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Dec 5, 2007 9:55:26 PM Info: Starting to save the repository
Dec 5, 2007 9:55:28 PM Info: Finished saving the repository
Dec 5, 2007 9:55:28 PM Info: Starting: Update: Selected software component 'CAF'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.13.0.20070809092315''/'0' updates currently deployed software component 'CAF'/'sap.com'/'MAIN_APL70P06_C'/'1000.7.00.6.0.20060221161956''/'0'.
Dec 5, 2007 9:55:28 PM Error: Aborted: software component 'CAF'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.13.0.20070809092315''/'0':
Failed deployment of SDAs:
development component 'caf/UI/ptn/common'/'sap.com'/'MAIN_APL70VAL_C'/'1497914'/'0' : aborted
Please, look at error logs above for more information!
Dec 5, 2007 9:55:28 PM Info: Starting to save the repository
Dec 5, 2007 9:55:30 PM Info: Finished saving the repository
Dec 5, 2007 9:55:30 PM Info: Starting: Update: Selected software component 'LM-TOOLS'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.13.0.20070906104634''/'0' updates currently deployed software component 'LM-TOOLS'/'sap.com'/'MAIN_APL70P06_C'/'1000.7.00.6.1.20060302145618''/'0'.
Dec 5, 2007 9:55:30 PM Error: Aborted: software component 'LM-TOOLS'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.13.0.20070906104634''/'0':
No further description found.
Dec 5, 2007 9:55:30 PM Info: Starting to save the repository
Dec 5, 2007 9:55:32 PM Info: Finished saving the repository
Dec 5, 2007 9:55:32 PM Info: J2EE Engine is in same state (online/offline) as it has been before this deployment process.
Dec 5, 2007 9:55:32 PM Error: -
At least one of the Deployments failed -
Regards,
Prashant.Hello Prashant.
Check this supporting SAP note 1010640. It will solve your problem.
This is typical problem when you upgrade from < SP8 to higher version.
You need to Undeploy the CAF components from the system using SDM first and then reply the patches from JSPM.
It should go with out errors.
Let us know if this worked.
*Reward points for helpful answer.
Regards,
Prashant P.
Maybe you are looking for
-
In Pricing Procedure PO is created the lowest price has to be picked
Hi All, In Pricing procedure there is price for material in outline agreement, inforecod and material specific price, my client want when a PO is created the the lowest price has to be picked. Kindly let me know the process for the issue hope to he
-
Hello! We are using Diadem Version 11.0 and the hardware cDAQ with the voltage measurement hardware NI9229/9239. I am trying to sample the voltage by at least 4khz, but I always get an error message that says that this rate isn't supplied by the hard
-
VPN/RDC HP OfficeJet 4632 printing
I am trying to print from my Office workstation to my Laptop with USB connection to the HP OfficeJet 4632 printer. I have installed the print drivers for the OJ 4632 on the Office workstation that is running Win 7 Pro x64. The workstation showes the
-
Hey everybody, I have a problem with designing my input-ready query. I know that I have to restrict the data that every record can uniquely be identified. If I define a very strict filter, I can enter plan data. But if I add only one characteristic t
-
Hi, I'm using a paged af:table and getting in the logs "<RenderingContext> <getTranslatedString> Could not fetch resource key Page from the skin myskin.desktop" (roughly translated). Solution in non-portal application is to specify resource bundle wi