Error in License check for IDES ECC 6.0

Hi All,
I am unable to log into our 800 client since yesterday, i am getting the foloowing error while trying to log in
"Logon not possible (error in license check)"
Before this we were getting a warning message that the license will expire in 10 days, so i deleted the old license and then it was ok for rest of the day.
But today we are not able to log in at all.
The new license that we applied at service market place is active and still we have this problem.
Can anyone please tell me how to solve this problem.
Its very urgent as our client has to go for their level two training.
Looking forward for a quick reply.
Thanks in advance
hunky

Hi,
If you keep getting license issues check that the hardware key, validity date, system name, installation number etc.. are right.
If you can't access the system is because theres something wrong with the license, I suggest you to request a new license and make sure all the details are spot on... then install the license. If this doesn't fix your problem... open an OSS to SAP.
Regards
Juan
Please reward with points if helpful

Similar Messages

Server0 getting down and logon not possible ( error in license check)

Hi Guys,
I rebooted my SAP server and after that server0 is in disabled mode, well both the boxes seems to be green but the server0 node in disable mode as if it is maintained by some parameter and I have changed it, which is not the case, also there is no log with dev_server0 since then. I have followed 723909 note and also copied the parameters of a running server but didn't get success. Also when I am trying to login through SAPGUI its giving me error " Logon not possible( error in license check)" while the license is already installed.
dev_w0 log says
M Wed Sep 01 14:42:14 2010
M *** ERROR => sap license, no valid license found [likeyapi_w.c 2260]
M *** ERROR => wlikey_check_webas: There is a permanent license key for "NetWeaver_ADA" in the system but it has never been checked successfully. In this situation a temporary license key mustn't be installed. [sliclikey.c 1314]
M *** ERROR => The temporary license key for NetWeaver_ADA could not be installed [likeyapi_w.c 2305]
SAP ECC 6.0 release 700
DB: MaxDB
OS: Win2k3 server
Please help.
Regards
Mridul Gupta

License issue is resolved but server0 node is still in disable status while the instances shows green, I checked dev_jcontrol log and found :
[Thr 2168] [Node: server0] java home is set by profile parameter
     Java Home: C:\j2sdk1.4.2_25-x64
[Thr 2168] JStartupICheckFrameworkPackage: can't find framework package E:\usr\sap\W6Q\DVEBMGS12\exe\jvmx.jar
JStartupIReadSection: read node properties [ID123322550]
-> node name          : server0
-> node type          : server
-> node execute       : no
-> jlaunch parameters :
-> java path          : C:\j2sdk1.4.2_25-x64
I think the node execute sud be yes, I just wanted to know how I can enable this.
Regards,
Mridul Gupta

Error when installing database instance IDES ECC 5.0 SR1

Hi,
I got an error like this when installing the database instance (non unicode abap system) for IDES ECC 5.0 SR1.
(I use ms sql server 2000 and windows 2003 server)
TRACE
trying to insert package SAPVIEW.STR
TRACE
checking directory IDES/Disc
ERROR 2008-07-13 14:57:41
MSC-01003 ESyException: ESAPinstException: error text undefined
          o
                +
                                  *o Transaction end ************************************************************
ERROR 2008-07-13 14:57:41
FSL-02015 Node D:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB\IDES\Disc\DATA does not exist.
WARNING 2008-07-13 14:57:41
The step fillR3loadPackageTable with step key SAPSYSTEM_DB|ind|ind|ind|ind|ind|0|SAPSYSTEM|ind|ind|ind|ind|ind|0|SAPComponent|ind|ind|ind|ind|ind|0|DatabaseLoad|ind|ind|ind|ind|ind|0|fillR3loadPackageTable was executed with status ERROR.
I have already create this folder :
D:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB\IDES\Disc\DATA does not exist.*
Can anyone help what is the error and how to solve it?
Thanks

Hi,
1. Check the CDs first.
2. D:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB\IDES\Disc\DATA--> this will automatically created by sapinst command.
Regards,
Srini Nookala

Error in license check - Error getting the hardware key

Hello,
I'm trying to run SAP NetWeaver 7.0 - Java and ABAP Trial Version on Linux - VMware Edition
but I still have a issue to log on, message : "error in license check"
I try everything I found in forums, I have tested the license, see the trace below.
I checked too files dev_w*
It seems there is a problem with server message
I checked in "dev_ms" file, but nothing has been wrote inside.
Please could you help ? maybe someone met the same issue and solved it.
Thanks
trc file: "dev_slic", trc level: 2, release: "700"
Test license for SAP SYSTEM: N4S
rdisp/mshost: n4shost
rdisp/msserv: sapmsN4S
MsIAttachEx: connect to n4shost / sapmsN4S
NiIInit: allocated nitab (2048 at 0xb72fa008)
NiHsLInit: alloc host/serv bufs (100/100 entries)
NiHsLGetNodeAddr: got hostname 'n4shost' from operation system
NiIGetNodeAddr: hostname 'n4shost' = addr 192.168.155.1
NiHsLGetServNo: got service name 'sapmsN4S' from operation system
NiIGetServNo: servicename 'sapmsN4S' = port 0E.11/3601
NiICreateHandle: hdl 0 state NI_INITIAL
NiIInitSocket: set default settings for new hdl 0 / sock 4 (I4; ST)
NiIBlockMode: set blockmode for hdl 0 FALSE
NiITraceByteOrder: CPU byte order: little endian, reverse network, low val .. high val
NiHsLGetServName: found port number 0E.11/3601 in cache
NiIGetServName: port 0E.11/3601 = servicename 'sapmsN4S'
***LOG Q0I=> NiPConnect2: connect (111: Connection refused) [nixxi.cpp 2769]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 4
"dev_slic" [noeol] 26L, 1378C 1,0-1 Top
dev_w8
M Wed Oct 19 11:46:48 2011
M ***LOG Q16=> ThGetMsHwId, DpMBufHwIdGet (HWID_PENDING) [thxxmbuf.c 512]
M *** ERROR => SlicLikeyGetHardwareKey: no hwid from MSG server: -1 [sliclikey.c 1250]
M *** ERROR => wlikey_check_webas: Error getting the hardware key. You might find some information in file "dev_ms" on the message server. [sliclikey.c 1269]
M ***LOG Q16=> ThGetMsHwId, DpMBufHwIdGet (HWID_PENDING) [thxxmbuf.c 512]
M *** ERROR => SlicKCheckLicense: did not get hwid from message server [slicch.c 306]
M *** ERROR => no hwid from msg-server received [likeyapi_w.c 2257]
M ***LOG Q16=> ThGetMsHwId, DpMBufHwIdGet (HWID_PENDING) [thxxmbuf.c 512]
M *** ERROR => SlicLikeyGetHardwareKey: no hwid from MSG server: -1 [sliclikey.c 1250]
M *** ERROR => wlikey_check_webas: Error getting the hardware key. You might find some information in file "dev_ms" on the message server. [sliclikey.c 1269]
M *** ERROR => ThCheckReqInfo: message send/receive failed [thxxhead.c 17124]
M
M Modeinfo for User T8/M0
M
M tm state = 2
M uid = 9
M term type = 0x2
M display = 0x0
M cpic_no = 0
M cpic_idx = -1
M usr = >SAPSYS <
M terminal = > <
M client = >000<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M its_plugin = NO
M allowCreateMode = YES
M blockSoftCanel = NO
M session_id = >4E9DB1D2B02B3BF6E1000000C0A89B01<
M ext_session_id = >4E9DB1D2B02B3BF6E1000000C0A89B01<
M imode = 2
M mode state = 0x42
M mode clean_state = 1
M task_type = ZTTABTC
M lastThFc = THFCBTC
M lastAction = TH_IACT_NO_ACTION
M th_errno = 0
M rollout_reason = 0
M last_rollout_level = 7
M async_receives = 0
M cpic_receive = 0
M em handle = 2
M roll state = 2
M abap state = 2
M em state = 3
M eg state = 1
M spa state = 3
M enq state = 0
M softcancel = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = 255
M debug_mode = 0
M mode type = 0x1
M debug = 0
M msg_count = 31
M tcode = > <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 0
M act enq infos = 0
M em_hyper_hdl = 0xa665a3b0
M plugin_info = NULL
M act_plugin_hdl = -1
M act_plugin_no = 0
M max_plugin_no = 0
M async_receives = 0
M vm = no VM
M
M *** ERROR => ThMBufFullRead: ThOpcodeToMsg [thxxmbuf.c 225]
M *** ERROR => ThMBufGet: ThMBufFullRead [thxxmbuf.c 183]
L *** ERROR => BtcEvtRaise: ThScheduler failed (target=, rc=4) [btcevt.c 223]
L *** ERROR => BtcEojRaise: BtcEvtRaise failed: jobname=BI_WRITE_PROT_TO_APPLLOG , jobcount=11414801, status=A [btcevt.c 52]

Hi,
As you are running a Trial version, I do not think HA/ASCS would be relevant for you.
As you found in the dev_ms trace, the port 3601 for message server is not accessible:
NiIGetServName: port 0E.11/3601 = servicename 'sapmsN4S'
***LOG Q0I=> NiPConnect2: connect (111: Connection refused) http://nixxi.cpp 2769
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 4
Check via command netstat if the port 3601 is free for use. The hardware key is obtained from message server and since this port is not available, neither is the message server/the hardware key. Perhaps a VM restart could also help.
Regards,
Srikishan

Error in license check on (what is supposed to be) the ABAP developer edition 7.02

I obtained (at least what I thought to be) the Developer Edition (7.02), the information for which gave the impression that it had a permanent license, but the license seems to have expired , and now I cannot log on: Status bar says Logon not possible (error in license check).
I've spent a diverting morning searching and even chatting with SAP about how to get running again (they suggested I re-install, which would not be a problem if it didn't take a whole freaking day to do).
Surely this is a known issue, but I can't find it.
What does one do with a piece of software that is supposedly never to expire but does?

Login with SAP* and enter transaction SLicense (there you can see information about license and validity).
There you can see an install button which opens a folder where the license should be (txt file sent from SAP by E-Mail after you entered the information in the websit formular which was mentioned above).
It should be the same mechanism for 7.02.
Cheers

N4S Test Drive New License not Allowing Logon (error in license check)

I reinstalled my N4S testdrive after a NIC failure caused all sorts of problems - the demo license had expired, so I requested and received a new demo license from SAP.
I've installed the license via SLICENSE, and the license is showing as successfully installed, and has the green light next to it. However, I can only logon as SAP* - none of the other created users can logon - the error message on client 001 is:
Logon not possible (error in license check).
I've reinstalled the license, but this hasn't helped. I'm wondering if there is something still on my system pointing to the old expired license. Has anyone come across this before or have any ideas?
Many thanks.

Hi,
i had same problem and on tr "\nslicense", on tab "Digitally-Signed licenses", on the left of message "A valid license key is required to operate this system" , there's the name of product (of course).
If you request your license key on http://service.sap.com/sap/bc/bsp/spn/minisap/minisap.htm there are various system Ids with the same name.
In my product "NetWeaver_ADA" the correct license is the second of three products with name "NPL - SAP NetWeaver 7.02" . When you receive your license via mail you have to find "SWPRODUCTNAME=" , in my case i found "SWPRODUCTNAME=NetWeaver_ADA" because that's my product.
Hi have requested 3 licenses and lost 4 hours,
regards

LOGON NOT POSSIBLE. ERROR IN LICENSE CHECK -- NO HWid from message Server

We could logon to the EC6 system. I
Stopped the EC6 system and started
it . It started with License Key
Error. the License key was available
and was shown in SLICENSE transaction
but it was giving LOGON NOT POSSIBLE.
ERROR IN LICENSE CHECK.
SO I deleted the TEMP and the Original
License via command SAPLICENSE -DELETE
and then REINSTALLED THE LICENSE with
the details
SAP System: EC6
Inst. Number: 0020174764
Hardware Key: Z1686313186
System Number: 310590866
Expires On: 31.12.9999
Key:
RZKGNA79K9U4F7D7SGGOWU1V
The License was successfully installed
but Still the samer error .LOGON NOT
POSSIBLE. ERROR IN LICENSE CHECK
Somehow it is not getting the hardware
key.But when I run the command
saplince -get then it returns
saplicense: HARDWARE KEY = Z1686313186
DEV_W0 log says that
M ***LOG Q16=> ThGetMsHwId, DpMBufHwIdGet (HWID_PENDING) [thxxmbuf.c 509]
M *** ERROR => SlicKCheckLicense: did not get hwid from message server [slicch.c 306]
M *** ERROR => no hwid from msg-server received [likeyapi_w.c 2268]
Please Help

Sergo
My sapmsEC6 has been assigned to 3601 port as my instanace number is 01 . So that is correct. the Thread which has given didn't help . Thanks for you inputs.
Yogesh

Script Error message when checking for updates....

Post Author: rcoleman
CA Forum: General Feedback
Getting a Script Error message when checking for updates or logging in to Crystal Reports. CR Developer v XI 11.0.0.1994.
Script Error
Line 481
Position 41
If g3()=True then main=True: Exit Fun
FYI to the Site Administrator

parkerpress wrote:
Any idea how to solve this if I haven't activated the 3GS service? I've been doing fine on wireless only.
Steve
Same problem here. After upgrading to iOS 4.2.1 a couple of weeks ago I'm getting the same error as the OP in the first post. I've never activated the 3G service.
I tried turning the cellular service on and checking for updates, pulled and replaced the SIM card, rebooted, nothing helps. I'm still getting the error when I click on the "Check for Update" button in iTunes (v10.1) when my iPad 64GB 3G is connected to my iMac. Any help would be appreciated. TIA.

"Logon Not Possible (Error in License Check)" at DR Site

Hi,
I am doing DR ( Disaster Recovery ) Site. I used Tivoli Storage Manager ( TSM ) to take FS Backup & DB Backup.
On the DR site I restore the same backup successfully and the resultant is I am able to run my SAP server.
When I try to connect through SAP Logon. it gives me first screen.
Problem none of the user is permitted to enter except sap*. for other user following message come.
"Logon Not Possible (Error in License Check)".
i know how to apply new license but in requesting permanent license the SAPnet is not asking hardware key.
Best Regards,
Syed Saifuddin
Software Architect ( JEE 5 )
SAP BASIS Administrator

Hi Syed,
Please check the SAP Note
Note 94998 - Requesting license keys and deleting systems.
Also check the sapms<sid> port.
Thanks,
Prabhat

Error in license check using SAP*

Dear All,
Even though we have deleted the SAP* password in DB level, I am unable to login R3 level
using SAP/Pass and with the parameter login/no_automatic_user_sap =0;
when i login to R3 level using SAP*/PASS , Errors is " LOGON not possible ( error in license check)
Could you please let me know , how can we rectify this error?
Thanks and Regards

Hi,
This Error will come if you have changed any port recently.
Most probable msserv_internal port will create problem.
Steps:
You need to check this on os level as you cant login to SAP.
1) Check start profile for parameter msserv_internal if its there comment it and restart SAP system
2) Check instance profile for parameter msserv_internal if its there comment it and restart SAP system.
3) Check default profile for parameter msserv_internal if its there comment it and restart SAP system.
update status once done!
Regards,
Gagan Deep Kaushal

Error in license check while loging in practice version

Hi,
I have practice version of SAP BI in my laptop..today I tried to log on but it says
Logon Not possible (error in license check) can anyone please help me suggesting best thing to do to get the version back for practice ??
Thanks,
Sandhya

Its SAP BI 7.0 version and I am able to give the log in id and password system ..I made changes to the date...still I am getting this error
I am getting this ABAP Error after I have changed the datee...
Run Time Error : ZDATE_ILLEGAL_LOCTIME
Date and Time : 2005-10-07 03:39:22
Short Text :
Error in SAP kermnel
The current ABAP "SAPMSYST" program had to be terminated because the ABAP processor detected an internal system error.
Error Analysis :
The ABAP interpreter always determines the local time relative to the datebase time.
Can some one please help ?

FRM-40506: Oracle error: unable to check for record uniqueness

Hello everyone
I have an emergency problom. the context is:
I have a master -detail structure in a form. first, my detail is a tabulation view, so it has severals records. Then, when i try to commit the form ii received the message <<<FRM-40506: Oracle error: unable to check for record uniqueness>>.
i made a test by changing the detail block presentation to Form. and i could save because my detail has one record.
Could someone has any idea how can I save my master-detail form with severals records in my detail.
Master
[code_p] [non_P]
Detail
[code_p] [product1]
[code_p] [product2]
[code_p] product3]
[code_p] [productn]
thanks!

Error Cause:
Processing error encountered while checking a record's primary key items for uniqueness. The table associated with the current block of the form does not exist, or you do not have authority to access the table.
You can review the error documentation:
http://www.errorpro.com/oracleerrors/oraerror.php?level1=Oracle&send=Send&ecode=FRM-40506&Submit=Search

HT4623 Every time I try to update, I get a message saying unable to update- an error occurred while checking for a software update

Every time I try to update, I get a message saying unable to update- an error occurred while checking for a software update

im having a similiar problem but my iphone 4s is stuck in the recovery mode.. like every time i restore the phone to factory setting it redownloads the firmware but nothing changes. any ideas?

Sap license error--error is "login not possible (error in license check)u0094

Hi,
I we are not able to login in our IDES r/3 system, it is showing login not possible (error in license check), only sap* is able to login . I have already applied sap license that will
Expires on 31-12-9999, I have old license also it was expired on 07-02-1996 it is under red light, second one under green light. I tried to del old one but system says through sap* not possible, only sys admin will do..what I can do now..

Hi,
When your license expired you can only login to the system with SAP* user.When you are login using sap* and deleting old license you will get a popup with this message <b>SAP* WHEN THE VALID SYSTEM LICENSES HAS EXPIRED,ONLY THE SAP* CAN LOG ON TO THE SYSTEM.IN THIS CASE,IT WOULD BE DANGEROUS TO LICENSE
THIS IS WHY THE SAP* IS NEVER ALLOWED TO DELETE A LICENSE</b>
So can cannot delete the expired license with SAP*.If u want to delete means try to login with <b>dilog user</b> and go to slicense T-code.
Select the expired license in menu goto EDIT->Delet license(shift+f2)
kiran kumar.v

Suddenly started receiving a error message when checking for updates in app store nsurlerrordomain error - 1012 how to fix?

Suddenly started receiving a error message when checking for updates in app store nsurlerrordomain error - 1012 how to fix?

Thanks Linc I will sit tight for a while to see what happens before chasing up customer service. Cheers.

Error in License check for IDES ECC 6.0

Similar Messages

Maybe you are looking for