Error in LO Extraction with BI7 .
Hi All,
Can anyone suggest me as to how to proceed with LO extraction with Queued Delta method. do we need to activate the Queue manually to work with Delta in LBWQ , I am unable to get the Init load running. I have filled up the setup tables aswell..
Thanks,
Krish..
Points are awarded for a solution.
Hi,
1) Stop all your R/3 users to stop the creation or changing the records in case your R/3 system is PROD
2) set the update mode is Queue delta in LBWE
3) Fill the setup table
4) Create and execute the info package with delta init
5) Schedule the collective run from Tcode LBWE
6) Create and execute the info package with delta load.
With rgds,
Anil Kumar Sharma .P
Similar Messages
-
Error in delta extraction with SAP DataSource 2LIS_11_VAHDR ...
Hi all
I used the old data load process(3.5) in 2004s system.
There are errors in detla extraction with SAP data source
2LIS_11_VAHDR
2LIS_11_VAITM
2LIS_12_VCHDR
2LIS_12_VCITM
The delta data(before/after image) aren't right.
Has anyone experices with this problem?
thanks in advanceNo Problems yet,explain the error message with error number in details here for some one to help you.
Hope it Helps
Chetan
@CP.. -
Error connecting SAP BW7.00/BI7.03 to R/3 4/7/6.20
We recently installed SAPNW2004s from ERP2005 package with BI7.03 addon. Right now we are configuring the system to connect to R/3 system which is a 4.7 appl with 6.20 basis. I am getting below error on RFC connection setting via RSA1 t-code.
"RFC user logon failed. Check the connection.
Message no. R3077
Diagnosis
You tried to logon to BW using the RFC user. This action failed.
System Response
service 'sapgw01' unknown / CPI-C error CM_PRODUCT
Procedure
On the following screen, check the destination from the source system into BW. Make sure you entered the correct password."
But I was able to reach R/3 system from bw system via ping test and viceversa. I know its not a password or user-id issue.
We were successfully able to do the same setup in SAPBW 3.5/BI 3.3
Was there any compatibility issue here between SAPBW7.0 WITH R/3 4.7/6.20 ? OR AM I missing some thing. Pls help.
Thanks
SriniHello,
Please check an entry in the /etc/services file for sapgw01.
sapgw01 3302/tcp
Best regards,
Daiva -
"An error occurred while extracting files from the package "BaseSystem.pkg".
Hello!
I have a
MacBookPro5,5
Prozessortyp:Intel Core 2 Duo
Prozessorgeschwindigkeit:2.26 GHz
Anzahl der Prozessoren:1
Gesamtzahl der Kerne:2
L2-Cache:3 MB
Speicher:2 GB
Busgeschwindigkeit:1.07 GHz
Boot-ROM-Version:MBP55.00AC.B03
SMC-Version (System):1.47f2
Hardware-UUID:A2DD27C4-9829-5A4D-854B-485EF8A6B20F
Problem:
I upgraded Leopard to Snow Leopard. Everything worked fine for a month. To free up disk space I deleted some of the iPhoto flders (modfied and original images). Everything worked still fine. Shut down the computer. Next day it was incredibly slow. At the same time the indexing was running. I stopped indexing, but stll slow. Every operation took minutes. I tried all the tricks that I found in the internet (repaired file permissions, repaired disk, cleared PRAM , moved big filed from desktop, etc.). After 24 full hours of trying all this I decided to erase the hard drive and reinstall, directly from the Snow Leopard Install disk, but it fails after downloading the packages. Below is the part of the log. Then I tried to use the old Leopard install DVD to reinstall Leopard, it then sais estimated time 12 hours or so and eventually crashed, spitting out a lot of "reportcrash" in the log. What is going on? I'm running out of options. Any advice? Would zeroing the hard drive help? If nothing else I plan to buy a new hard drive, since the only explanation I have is that there is a problem with the hard driven although the disk utility says it is OK. I need a bigger one anyway. Any ideas? Thank you!
Aug 16 05:17:31 localhost OSInstaller[139]: IFPKInstallElement (191 packages)
Aug 16 05:17:35 localhost OSInstaller[139]: PackageKit: ----- Begin install -----
Aug 16 05:17:35 localhost OSInstaller[139]: PackageKit: request=PKInstallRequest <191 packages, destination=/Volumes/Macintosh HD>
Aug 16 05:17:36 localhost OSInstaller[139]: PackageKit: Extracting /Volumes/Macintosh HD/Mac OS X Install Data/BaseSystem.pkg (destination=/Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root, uid=0)
Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/DataPool.c:116 : Error: finished pool without filling it
Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/commonUtils.c: 315: Error: fh_pread -1
Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/StreamCompress or.c:236: Error: write failed for /Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root//System/Library/Frameworks/OpenCL.framework/Versi ons/A/Resources/runtime.amdil.bc: Invalid argument
Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/StreamCompress or.c:260: Error: futimes failed for /Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root//System/Library/Frameworks/OpenCL.framework/Versi ons/A/Resources/runtime.amdil.bc: Invalid argument
Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/StreamCompress or.c:829: Error: returning errno 22 from FinishStreamCompressorQueue
Aug 16 05:32:10 localhost OSInstaller[139]: PackageKit: Install Failed: PKG: extracting "com.apple.pkg.BaseSystem"\nError Domain=PKInstallErrorDomain Code=110 UserInfo=0x12c8366a0 "An error occurred while extracting files from the package “BaseSystem.pkg”." Underlying Error=(Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12e703300 "The operation couldn’t be completed. FinishStreamCompressorQueue error") {\n NSFilePath = "/Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root";\n NSLocalizedDescription = "An error occurred while extracting files from the package \U201cBaseSystem.pkg\U201d.";\n NSURL = "BaseSystem.pkg -- file://localhost/Volumes/Macintosh%20HD/Mac%20OS%20X%20Install%20Data/index.pro duct";\n NSUnderlyingError = "Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12e703300 \"The operation couldn\U2019t be completed. FinishStreamCompressorQueue error\"";\n PKInstallPackageIdentifier = "com.apple.pkg.BaseSystem";\n}
Aug 16 05:32:10 localhost OSInstaller[139]: install:didFailWithError:Error Domain=PKInstallErrorDomain Code=110 UserInfo=0x12c8366a0 "An error occurred while extracting files from the package “BaseSystem.pkg”." Underlying Error=(Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12e703300 "The operation couldn’t be completed. FinishStreamCompressorQueue error")
Aug 16 05:32:11 localhost OSInstaller[139]: Install failed: Die Installation ist aufgrund eines Fehlers fehlgeschlagen. Wenden Sie sich an den Hersteller der Software.
Aug 16 05:32:13 localhost OSInstaller[139]: Allowing machine sleep.
Aug 16 05:32:15 localhost OSInstaller[139]: Memory statistics for 'Installation ist fehlgeschlagen' pane:
Aug 16 05:32:15 localhost OSInstaller[139]: Physical Memory Allocation: 139 MB wired, 259 MB trapped, 397 MB active, 7 MB inactive, 1246 MB free, 1650 MB usable, 2048 MB totalIt sounds to me like your Internal Hard Drive is failing.
I recommend you buy a new one, that is a good candidate for replacing the old one, but install it in an External enclosure and Install a fresh Mac OS X on it from the DVD. You can boot your Mac from any attached drive.
The new System can be used to get some work done, check your emails, and takes the pressure off resolving this immediately. You can also attempt to salvage files off the old drive if needed.
Once things seem to be working, then move the new drive inside the computer. Failures at this point may be due to bad cable, which has been a problem in some of these MacBooks.
Use security erase, write Zeroes, one pass, to re-write every block on the old drive. Any block discovered to be bad will be replaced with spares the drive holds in reserve for this purpose. If more than 10 blocks are pared on one pass, "Initialization Failed!" will be the result. Although you can try the erase again, there is some question whether you want to trust this drive with your precious data. -
Errors occurred during extraction of the existing UDC Connect sources
HI ALL,
I try to create a DataSource with UD Connect on BW 3.5,
i choose a RFC destination, but after of to choose UD connect source appear the next error message "Errors occurred during extraction of the existing UDC Connect sources".
The RFC destination is OK.
In the CCMS Monitor the Java Connectors and Enterprise Java Beans are available.
Help me please!
regards!Hi, me again, I change some parameters and now is working but wrong!!!!! when I try to select a UD connect, in the match code i get the next list:
6B偡浡彏啔䐠#############
#########彏啔###########
#############偡浡彏啔偡浡彏啔
please if anyone knows what is going on help me...!!
tnx -
Hi this message appears after 2 hours downloading Mavericks in App Store :
an error occurred while extracting files from the package "mzps4135638417199433253.pkg"
Same with "CMD + R"
Help...It sounds to me like your Internal Hard Drive is failing.
I recommend you buy a new one, that is a good candidate for replacing the old one, but install it in an External enclosure and Install a fresh Mac OS X on it from the DVD. You can boot your Mac from any attached drive.
The new System can be used to get some work done, check your emails, and takes the pressure off resolving this immediately. You can also attempt to salvage files off the old drive if needed.
Once things seem to be working, then move the new drive inside the computer. Failures at this point may be due to bad cable, which has been a problem in some of these MacBooks.
Use security erase, write Zeroes, one pass, to re-write every block on the old drive. Any block discovered to be bad will be replaced with spares the drive holds in reserve for this purpose. If more than 10 blocks are pared on one pass, "Initialization Failed!" will be the result. Although you can try the erase again, there is some question whether you want to trust this drive with your precious data. -
Error in BEX7.0 with Excel 2007
Previously we had Excel 2003. It was working fine with BI7.0
When we installed Excel 2007, and trying to open a query.. it is giving folowing error
"Critical Program Error Occured. The Program has to close. Please refer to the trace for further information"
I thought its authorization issue, so I traced using ST01 for this. But there the return code is showing Sucess ( RT = 4). So can anyone let me know where is the errror.
Client wants to work with EXcel 2007 with BI7.0
Please consider this as urgent
savithaHi Savitha,
support on office 2007 is available with FEP 2.
check with the SAP note 1013140
also check the thread
Re: Excel 2007 and BEX Analyzer
Hope this resolves
Regards
Karthik. -
Error to start Extract Process....
hi,
when i am trying to start DataPump process then it send me the error.
GGS ERROR ZZ-0KL The trail './dirdat/ta' is not assigned to extract 'EPMP2'. Assign the trail to the extract with the command "ADD EXTTRAIL/RMTTRAIL ./dirdat/ta, EXTRACT EPMP2.
cant' start all the procees..
help????Hi,
This problem related to assigning the trail file to pump process, Make sure the below steps which you have configured correctly,
Primary Extract:
GGSCI > ADD EXTRACT <ext name>, TRANLOG, BEGIN NOW
GGSCI > ADD EXTTRAIL <path of local trail file in source server > , EXTRACT <above same ext name >
For data pump process(secondary extract):
GGSCI > ADD EXTRACT <pump name > , EXTTRAILSOURCE < above same local trail file path >
For remote trail :
ADD RMTTRAIL < path of remote trail file, which is the path in remote server > , EXTRACT < above pump name>
Hopefully this will help you
Annamalai. -
Greetings,
I'm getting the following runtime error: SAPSQL_CURSOR_ALREADY_OPEN during extraction of infoSource: 0CO_OM_CCA_9.
Runtime Errors SAPSQL_CURSOR_ALREADY_OPEN
Date and Time 23.05.2011 11:10:44
Short text
Attempt to open a database cursor which was already open.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLBWOMR" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An OPEN CURSOR statement established that the cursor
was already open. This means that it was not closed in the previous
processing with CLOSE CURSOR.
I Checked OSS notes for my infosource error with no luck.
Could you help in that matter?
Thanks
-RoulaHave a look on following note:
[1373960 - BW extractor: Runtime error SAPSQL_CURSOR_ALREADY_OPEN|https://service.sap.com/sap/support/notes/1373960] -
Error message: "Cannot extract the embedded font DAAAAA+Arial MT..."
hello,
after open an pdf file I get the error message "Cannot extract the embedded font DAAAAA+Arial MT..." I get this message with Adobe Reader Version 6.x, 7.x, 8.x and 9.0 on three different pc (Windows XP). The file was written with Adobe Acrobat Version 8.1
I found the kb402950 but the solution to use Version 7.x didn`t work.
Any other ideas?Hey k%20street,
There seems to be a font issue within this particular file, but you cannot do anything using only Reader.
So, as long as it displays correctly, there should be no problem with printing. It is simply a warning that apparently something was a miss in an embedded font and result might not be as expected.
Regards,
Anubha -
RSA3: error occured during extraction hierarchy
Hi,
I have created 2 sets using tcode cxsa, ZAAA and ZBBB. Table that used for this set is FIMC and the field is RBUNIT. After that, i create generic hierarchy datasource using tcode BW07, enter the table name and field,then execute (custom data source with name 'ZFIECCS_HIER_CONS_UNIT' created). I don't use option 'Hierarchies of Sets with Compounding' here.
After that i try to use tcode RSA3, enter the datasource = ZFIECCS_HIER_CONS_UNIT, enter HIENAME = ZAAA or ZBBB but i get message error 'Error occured during extraction'.
I try to debug this extractor and find error happen in FM GSBH_HIERARCHY_TRANSFER_SETS, this happen because i_s_hiebas-hclass <> i_s_hiersel-hclass.
Then i try to execute program RSA1HCAT using tcode SE38. I enter my datasource and execute. I found that ZAAA and ZBBB not in list of hierarchy that can be accessed.
Anyone can help my problem?
Regards,
Satria BudimanHi,
Go to RSA6 and see if data source is using the correct version or not.you can select the data source and click on chek option on the top and see if its any error.
If it is dump then there is no other option but to retransport it again.
try to see if the extract struture used by this data source is active or not??
See if you are getting the error in the test systems also or not.
Issue could be with the reallignment also where a controlling master data is changed.
Thanks
Ajeet -
0PM_PRM_PLCS_1 error occured during extraction
Dear gurus ,
i have make entry im pm_c05 table and extract the data first time ,it works fine .when i again try to load data it give me error .i have checked in rsa3 and while extraction it is giving error " Error occured during extraction " . our bi is is on 7.0 and erp 0n ehp 6.4 .i have implemented the sap note 0001243299 but again gettinng the same error.please help me outHi Faisal:
I've found a long list of SAP Notes that might be applicable to your environment, even though it is not mandatory to implement all of them to solve the issue you're facing right now, please consider the convenience of installing them on your system to fix some potential problems in advance.
Note 1344048 - "0PM_PRM_PLCS_1: Delta upload does not work as expected"
Note 1285238 - "0PM_PRM_PLCS_1: Errors during extraction, poor performance"
Note 1323965 - "0PM_PRM_PLCS_1: Calculation for services"
Note 1338093 - "0PM_PRM_PLCS_1: Execution factor not taken into account"
Note 1339189 - "0PM_PRM_PLCS_1: Error occurs for alternative indicator"
Note 1340188 - "0PM_PRM_PLCS_1: Revision of the calculation module"
Note 1312783 - "0PM_PRM_PLCS_1: Implementing additional fields"
Note 1314158 - "0PM_PRM_PLCS_1: Incorrect result during extraction"
Note 1356256 - "0PM_PRM_PLCS_1: Poor system performance with strategy plans"
Note 1416214 - "Overlap of records due to key constraints in 0PM_DS07"
Note 1446484 - "Planned costs, costing, ECP: Incorrect message KI 217"
Note 1508442 - "ECP, extractor 0PM_PRM_PLCS_1: error ME024 or ME025"
Regards,
Francisco Milán. -
Update turbotax 2013 error can't extract from archive on install and launch
I installed my turbotax 2013. Then it said to update. I downloaded the update. Then it said install and relaunch. Up comes this message, "An error occurred while extracting the archive. Please try again later. No matter what I try. It comes up with same error message. I was online with intuit techs and they haven't solved it yet. Any ideas?
First off, you are not seeing a kernel panic but an inability to load the kernel file "mach_kernel," which is damaged or missing.
This is apparently because of a file system error (Invalid Key Length), a serious error Disk Utility is not designed to repair, since the repair usually involves loss of data & that app is very conservative about such things.
It is almost impossible that the update itself is responsible for creating this error but very common for one to exacerbate it if it already exists. This is because file system errors corrupt files when the OS writes files to the disk, & updates write a lot of files to the disk.
If you have implemented a backup strategy, the fix is straightforward, if a little time consuming: reformat the drive, do a new install of the OS from the installer disks, & restore your data from your backups.
If you have not implemented a backup strategy, you now know why one is essential: no data you cannot afford to lose should reside only in one place like your internal hard drive. Data is lost every day because of human error, theft, hardware failure, or a host of other reasons. Only a good backup strategy can prevent this.
Assuming the second situation applies to you, your best bet is to purchase a more powerful disk repair utility like DiskWarrior to see if it can repair the file system damage with minimal data loss. Be sure you read & heed the app's manual before using it! Failure to do so, or attempting to use the computer before the errors are repaired, will almost certainly result in more data loss. -
An error occurred while communicating with BI server
dear all,
when i executing my query on BEx analyzer it gives me whole summerised report but after filtering it shows me following error message:
An error occurred while communicating with the BI server.
As a result of this error, the system has been disconnected from the BI server.
Detailed Description:
No more storage space available for extending an internal table.
pls provide the solution as soon as possible.Hello,
I am guessing that there is a memory related ABAP dump that follows this disconnection too? Please review below:
353579 SYSTEM_NO_ROLL -> Solution: Increase the value of the parameter ztta/max_memreq_MB
706579 SYSTEM_NO_ROLL dump with large documents.
530741 SYSTEM_NO_ROLL runtime error with delta extraction
Please also review these general memory parameter notes to ensure the landscape is optimally set-up.
425207 - SAP memory management, current parameter ranges
146289 Parameter Recommendations for 64-Bit SAP Kernel
How many cells are being selected, you will probably need to add more filters or use a smaller timeframe etc. to reduce the result set.
Regards,
Michael Devine -
Internet Download error message: the connection with the server has been reset
With an WRT54GS v6 firmware v 1.50.9 on Windows XP SP2 with Internet Explorer 7, Intel wireless internal adaptor w/ 802.11b, I was getting the error message "The connection with the server has been reset" when downloading most anything from the Internet. My IP address would then be reset and download would be interrupted. To resolve, I turned off the WZC (Wireless Zero Configuration) Services, and this seems to correct the problem.
Control Panel > Admin Tools > Services > Wireless Zero Configuration > Disable
Hopes this helps.Hi!
Im using Windows 7.... I tried looking for the Wireless Config - but it isn't in the Services options!
So, what can I do now?
Thanx
Maybe you are looking for
-
Is there a way to reagrrange my apps? or set up folders to put them into by subject?
Is there a way to rearrange my Apps or set up folders to put them into by subject?
-
Time Capsule needs to be sent back to the design shop!!!!
Clearly this product has serious compatibility issues and needs a lot more work to be part of the Apple family of high quality products. Mine is going in the bin!
-
ORA-00932: inconsistent datatypes: expected - got BLOB
Hello Why in the following query I got the above error (SELECT distinct K_PRESTAA_IMGA FROM (SELECT NVL(IMG_ESAME, EMPTY_BLOB() ) K_PRESTAA_IMGA FROM table UNION all SELECT NVL(IMG_ESAME, EMPTY_BLOB() )
-
My mac no longer saves its state when the battery runs out.. ??
Earlier when My mac drained it's battery & was not plugged in, it would give me a warning then save it's state & shut down.... Now 1 1/2 years into my Macbook Pro 17" intel it turns off but doesn't save my state, so anything not saved is lost.. (basi
-
How to fix wifi cannot open after upgrade it to ios7?
after upgrade it using itunes, the problem for my wifi encountered. when i turn it on, nothings happen. the icon never change it to ON.