Error in Loading Meta Data File for Service 'CL_ACCOUNTING_DOCUMENT_DP'

Hi Guys,
Need to your assistance in solving the below Error.
1. Error while loading metadata file for various service which required Connectors to be created .
Example : CL_ACCOUNTING_DOCUMENT_DP',
BEP
ZCB_COST_CENTER_SRV
1
Cost Center Service
CB_COST_CENTER_SRV
1
BEP
ZCB_GOODS_RECEIPT_SRV
1
Goods Receipt Service
CB_GOODS_RECEIPT_SRV
1
2. While Expanding the node for connectors in ESH_COCKPIT for SAPAPPLH . Below Error occurs
Could not rename Data Type "SIG_IL_USA_2" in SWC EAAPPLH - errors occurred during renaming
Could not rename Data Type "SIG_IL_SDR_2" in SWC EAAPPLH - errors occurred during renaming
Could not rename Data Type "SIG_IL_RES_2" in SWC EAAPPLH - errors occurred during renaming
Could not rename Data Type "SIGN_TYPE_UD_1" in SWC EAAPPLH - errors occurred during renaming
Could not rename Data Type "SIGN_TYPE_SM_1" in SWC EAAPPLH - errors occurred during renaming
Could not rename Data Type "SIGN_TYPE_RR_1" in SWC EAAPPLH - errors occurred during renaming
Could not rename Data Type "RMXTE_TRIALID_1" in SWC EAAPPLH - errors occurred during renaming
Could not rename Data Type "QZUSMKZHL_1" in SWC EAAPPLH - errors occurred during renaming
Could not rename Data Type "QWERKVORG_1" in SWC EAAPPLH - errors occurred during renaming
Could not rename Data Type "QVNAME_2" in SWC EAAPPLH - errors occurred during renaming
Could not rename Data Type "QVMENGE_2" in SWC EAAPPLH - errors occurred during renaming
Could not rename Data Type "QVINSMK_2" in SWC EAAPPLH - errors occurred during renaming
Could not rename Data Type "QVGRUPPE_2" in SWC EAAPPLH - errors occurred during renaming
Could not rename Data Type "QVEZAEHLER_2" in SWC EAAPPLH - errors occurred during renaming

Hi,
do you have solved this issue? We have the same problem with ESH_COCKPIT and SAPAPPLH component.
Regards,
Martin Sindlar

Similar Messages

Language error while loading master data source for text

Hi,
We are getting the following error while loading the data in 0DISTR_CHAN_TEXT data source.
"Error during multibyte alignment for language D (position 2)".
Can we filter the data on the Language ( ='EN'). At the data source level LANGU field is marked for selection but still it is not available as filter at info package level.
Thanks
VV

Hey Vishal,
If the field is marked for Selection at data source level, then it must be available for selection in infopackage.
Try checking in RSA3 and see if it is available for selection over there. Let us know what was the output in R/3.
Regards,
Anjum.

Error in loading the WSDL file. Check the error log for more details

Hello,
I am trying to create a Import Adaptive Webservice Model. I am using the WSDL:
http://www.abysal.com/soap/AbysalEmail.wsdl
I am getting the below error when I choose WSDL source as UDDI or file (I am not using any logical destination)
"Error in loading the WSDL file. Check the error log for more details."
Where can i see the error log? And what is the solution to fix this?
I am able to create the model if i save the wsdl locally on my machine and choose Local File System or File as the WSDL source. But at runtime this fails as the application tries to read the WSDL for metadata info and it looks into the application server for this file.
I also tried creating the old webservice model. And it is able to create the model. But I feel I need to use the new model as this one is deprecated.
Thanks,
Sachin

Hi
For the logs you can search in this directory
Goto Window->Show view->Other->PDE Runtim->Error Log
please try this may it would help you out, try to create a model for you Web Service using Web Service Model (DEPRECATED)
See this link:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/integration%2bof%2bweb%2bservices%2b-%2bdifferent%2bscenarios

HT1386 Error message when trying to sync .. "unable to load provider data from sync services

When trying to sync I phone ... I get an error message saying Unable to load provider data from sync services ....
I have removed and re-installed I tunes and still get this message ..
Thanks for any help !

Thanks Joy
I did try that and it eventually went to backing up. however, after 2 Hrs the bar hadn't moved any ..

Every time I sync my iPod or iPad I get an error message "unable to load provider data from Sync Services"

Every time I connect my my iPod or iPad to my laptop I get the error message "iTunes was unable to load provider data from Sync Services. Reconnect or try again later" There is no problem with my internet connection and syncing then seems to occur OK. I upgraded to iOS 5 recently but have been getting the problem for several months. Due to recent problems with iCloud I am now concerned that this may be something significant that could lead to my losing data.
Anyone got any ideas?

Doublechecking. You've tried the following document?
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert

Hello. I am owner of an iPod Touch 5gen. I have an error "iTunes was unable to load provider data from sync services". I tried: All Apple's tutorials including reseting sync data, reinstalling and deleting all of iTunes components including deleting it fr

Hello. I am owner of an iPod Touch 5gen. I have an error "iTunes was unable to load provider data from sync services". I tried: All Apple's tutorials including reseting sync data, reinstalling and deleting all of iTunes components including deleting it from system registry. My system is Windows 7 64bit.

UPDATE: The true error is : '
"itunes was unable to load data class information from sync services"
Any of the topics didnt work.
Sync on my wife's laptop works.

New Line in data file for sql loader

Hi all,
I have a requirement to load a data file in which some of the rows are in new line as given in following example. If i put a '\n' character in control file, then it will load only those records which have newline in them ignoring non new line ones. please have a look at control fileand provide a solution to it :-
32 grand street ~NY~NY
42 riverdrive,
apt 1B ~PL~TX
Richardson road
apt 32~ SF ~CA
As you see there are newline characters in record 2 and 3, right now my control file looks like this -
LOAD DATA
INFILE 'example.txt' "STR '\r\n'"
INTO TABLE "temp_table"
INSERT
FIELDS TERMINATED BY '~'
TRAILING NULLCOLS
(ADDRESS1,
CITY,
STATE)
If i remove "STR '\r\n'" , then the data gets loaded into different rows like the third record looks like this -
ADDRESS                         CITY                     STATE
Richardson road null null
apt 32 SF CA
Please help.

Your requirement is very unclear.
Is this your INPUT ?
--record 1
32 grand street ~NY~NY
--record 2
42 riverdrive, --"NL"
apt 1B ~PL~TX
--record 3
Richardson road --"NL"
apt 32~ SF ~CAIs this your OUTPUT?
ADDRESS      CITY STATE
32 grand street NY   NY
42 riverdrive,     null null
apt 1B          PL   TX
Richardson road null null
apt 32           SF   CAAre you using Linux or Windows platform?
You should have only one record terminator character.
*\r\n* is Windows The End of Line character (The Carriage Return + The Line Feed).
"STR '\r\n'" = "str X'0D0A'"
If there is no data after \r\n, columns will be null.
http://docs.oracle.com/cd/B28359_01/server.111/b28319/ldr_concepts.htm#i1005800

ITunes 10.5.3, Unable to Load Class Data from Sync Services, Crashes Repeatedly

Ever since iTunes 10.5.3 on my Windows 7 x64 box, I've been having serious problems keeping iTunes running:
1) Any time I connect my iPhone or iPad, or any time they attempt to sync over WiFi, I get the 'Unable to load class data from sync services' error. It's worth mention that the iPhone or iPad do actually then proceed to sync correctly, and all media / data is synchronized successfully, as far as I've been able to tell. I've reset sync history, restored the iPhone and iPad, manually moved the SyncServices directory, set both the iPhone and iPad up as new, completely uninstalled iTunes and the mobile device software, re-installed, and *nothing* I do fixes this issue or even seems to impact it. Uninstalling iTunes 10.5.3 and reinstalling iTunes 10.5.2 resolves this error.
2) iTunes 10.5.3 has serious crashing problems on my machine, though I've searched through forums and found a lot of other people with the problem. In my case, sporadically as iTunes access the iTunes store (for example, I can always make it happen by subscribing to the Diggnation podcast and telling it to refresh the podcast), I get a full application crash which generates the following event in the event log:
Faulting application name: iTunes.exe, version: 10.5.3.3, time stamp: 0x4f14cc3d
Faulting module name: KERNELBASE.dll, version: 6.1.7601.17651, time stamp: 0x4e211319
Exception code: 0x80000003
Fault offset: 0x0001280c
Faulting process id: 0x564
Faulting application start time: 0x01cce78789dc009a
Faulting application path: D:\Program Files (x86)\iTunes\iTunes.exe
Faulting module path: C:\Windows\syswow64\KERNELBASE.dll
Report Id: ecc77400-537a-11e1-b809-00248c196007
Again, uninstalling iTunes 10.5.3 and re-installing iTunes 10.5.2 fixes this issue as well, but I really shouldn't have to do that. Is there any actual solution to these problems other than dowgrading to an older version?
Yes, I'm running current malware protection (and my system is clean) and yes, I've already checked any other obvious culprits to make sure I don't just have a corrupt library or file somewhere that's causing it. My Windows 7 install is completely up to date from a Windows Update perspective and also from a driver perspective (even including the motherboard and chipset drivers). I made sure to do a system file integrity check (sfc /scannow) and it confirmed my install of Windows isn't suspect, but beyond all that I was able to reproduce these failures on a completely separate machine running Windows 7 x64, without any of my media library or data on it -- iTunes 10.5.3 just seems to be bad news on Windows 7 x64 for me, even though I know there are definitely people are using it successfully. I don't get any other application crashes for any other applications, and I've never had an issue like this with any previous version of iTunes...
Last but not least, in case it matters, I'm running iOS 5.0.1 on both the iPhone4 and the iPad2. The iPhone4 is the GSM AT&T model and the iPad2 is the CDMA Verizon model.

OK, I've given up. Uninstalled iTunes 10.5.3 permanently. It's a shame, 10.5.2 works perfectly but 10.5.3 is a complete and total cluster for me.
Anyone with the same problems who hasn't done this already, just uninstall iTunes and the Apple Mobile Device Service in your Add/Remove Programs, then re-install iTunes 10.5.2. You won't lose your library or any settings or apps, it will just go back to working again.
I wish Apple would acknowledge this so that I'd at least know it would be fixed in the future.

Itunes was unable to load provider data from sync services. Reconnect or try later

Hi everyone
This issue has got me stumped.
I have a Dell Vostro desktop computer with Windows 7 SP1 64 bit edition.
I used to be able to sync now I cannot bakup or sync.
The device is an iphone 4s with the latest software IOS 5.1.
Itunes is version 10.6.0.40, the latest.
To try to fix this problem I removed itunes/quick time completely. Removed Bonjour, Apple Application Support, Apple Mobile Device Support, Apple Software Update,
Deleted the itunes and quick time folders, the common file folders and files, deleted anything related to able under appdata local and roaming, removed apple folder under program data, scanned through registry and removed all apple entries.
Then I rebooted the computer, re-installed itunes/quicktime and have the same error appear again.
I have gone through this process at least 5 times , but still keep getting the same error, cannot go past it.
I found a solution on this forum but it only applies to MACOS, could not find anything suitable for windows 7 environment.
Also searche the web high and low and tried several different advice from people.
This has to be a bug with Itunes! I would like to hear from Apple developers and programmers why I have to suffer so much to sync my device.
As a last resort I am planning to rebuild windows 7 from scratch but is is a big job.
Tried also to disable firewall, antivirus, check the apple windows services are running, nothing works to get me past this error.
Please help someone!
Thanks and regards
Alfred

Did you have a look ath this (rather) long thread about it?
https://discussions.apple.com/message/17214161#17214161 , for example:
danielfromkongsvinger
Re: Unable to load provider data from Sync Services
16.12.2011 20:21 (in response to wisniak)
"I then followed a tip found in PCWorld and performed the following:
1. Make sure iTunes isn't running.
2. Click Start, type regedit, then press Enter.
3. Navigate to this Registry location: HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\Layers
4. Look in the main pane for a key that refers to iTunes. If you find one, delete it, then exit the Registry.
5. Start iTunes. The offending message should be gone!"
This actually worked for me! I have struggeled with this error for years, and now it's gone. Thanks!

Problem in loading meta data !!!!

Hi,
While creating metadata in IDX2, I am getting communication error 'Error when opening an RFC connection' .
I have created port SAP<SYSTEM ID> and client no & giving rfc des of sap system in idx1 . and while loading meta data i an getting above error .
I able to load meta data if i use other (non sap ) port eg abc and usng   rfc des of sap system . but idocs are not reaching xi
What are the steps we should do for loading metadata by using sap port i.e client .
Please help me solve this problem
Thanks,
Sridhar

HI
ALE SETTINGS TO POST IDOC OUT OF SAP R/3
We need to do the following settings in XI
1)   Create an RFC Destination to the Sending System in transaction code (SM59)
a)   Choose create
b)   Specify the name of the RFC destination
c)   Select connection type as 3 and save
d)   In the technical settings tab enter the details SAP SID/URL and system number#
e)   Enter the Gateway host as same details above SID/URL
f)   Gateway service is 3300+system number#
g)   In the Logon /Security tab, enter the client user & Password details of Destination system
h) Test the connection and remote logon.Both should be succesful
2) Create Port Using Transaction Code IDX1
a)   Select create new button
b)   Enter the port name as SAP+SID (The starting char should be SAP)
c)   Enter the destination client
d)   Enter the RFC Destination created in SAP R/3 towards other system
e)   Save
3) Load Meta Data for IDOC Using transaction Using Transaction (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1
                    SETTINGS IN SAP R/3
     We need to do the following settings in R/3
     Logon to Sap R/3 System
1)   Create an RFC Destination to XI in transaction code (SM59)
a)   Choose create
b)   Specify the name of the RFC destination
c)   Select connection type as 3 and save
d)   In the technical settings tab enter the details SAP SID/URL and system number#
e)   Enter the Gateway host as same details above SID/URL
f)   Gateway service is 3300+system number#
g)   In the Logon /Security tab, enter the client user & Password details of Destination system
h)   Test the connection and remote logon.Both must be succesful
2)   Create communication Port for Idoc processing Using Transaction(We21)
a)   First Select Transactional RFC and then click create button
b)   Enter the destination port name as SAP+SID (The starting char should be SAP)
d)   Enter the RFC Destination created in SAP R/3 towards other system.
e)   Save
3)   Create Partner Profile with Outbound Parameters (WE20)
a)   Create New
b)   Create the Partner no. name as same the logical system name of the destination system
c)   Select Partner type LS
d)   Enter details for Type: US/USER, Agent, and Lang
     Then Save
e)   Select Partner no. and LS which were create above
f)   Now we have to give some Outbound Parameters.So click on ADD TO Create Outbound Parameter
g)   Select Message type
h)   Double click on Message Type and Then Enter the details for Receiving port, Pack size=1 and Basic type
I)   save
4)   In Transaction SALE, Create Logical System
a). Go to Basic Settings-> First Define logical systems
     and then assign logical systems
b)   Double click on Define the logical systems
c)   Give data for your Logicaal System and Name
d)   Now click on Save.Here one window may appear just click on Continue.Now the Logical System name is ready
e)   Assign the logical system name to the client
5)   Create Customer Distribution model in the transaction code BD64
1)   Click on the Create modal View button and enter the short text, Technical name etc as shown below
2)   Now select the created model view and click on Add message type button .A pop up box appears, enter Sending system, receiving system and message type
3)   Save the Distribution model
    Generate Partner Profiles
Click on Menu Item Generate Partner Profiles
    It leads to the next transaction where in the selection screen you have to provide Model view name, Partner System logical system and execute
    Then, you will be intimated about the partners, port creation, and outbound parameters creation
4)   Distribute Customer Distribution Model
    In the menu item GO to Edit->Modal View-> Distribute to the destination client
    Popup window appears ,press Enter
You will be intimated about the the Modal View Distributed
PLZ REWARDS POINTS
VIKAS

Error in loading the WSDL file

hi
when i am creating a Adaptive Webservice model with the sneak preview 2004s
while Choosing the published service from UDDI
i am getting and error called
"Error in loading the WSDL file"
i have gone through the log files it basically saying that
Caused by: java.io.IOException: Cannot connect to http://192.168.1.69:50100/QuickCarRentalService/Config1?wsdl, passing via http proxy: :80: Connection refused: connect
but i am not using any proxy server
what all changes i need to do in proxy server settings
Regards
JM

Hi John,
For changing the Proxy Settings in NWDS.
Navigate to Window --> Preferences.
Under Work Bench, Select Proxy Settings.
There is a Check box saying "Use Proxy Sever", uncheck this one;
and try imprting you WSDL file again.
Hope it helps.
Regards,
Alka.

Error while loading master data.

I am facing error while loading master data in a infoobject.
The error comes when I run DTP fo rloading data from PSA to infoobject.
The error wordings are : "MCK_PRDT1 : Data record 1 ('Bleach '): Version 'Bleach ' is not valid"
Please help me in understanding this Version errror and suggest a solution for this.

SAP metodology integration MDM & BW you can look at:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0f1f135-0015-2b10-5e83-acca118e17aa
You can turn matching strategy in MDM Data manager for delete dublicate of records
and then use MDM Syndicator for export data to file and then load that file to BW
If you use OHD you cannot load from BW to MDM repository 10 records and unload only 5 because
in BW every record has unique key.
also you can use MDM ABAP or Java API for delete dublicate of records
Edited by: Kanstantsin Chernichenka on May 8, 2009 1:02 PM

Getting Error while accessing the data using odata service

Hi All,
Iam new to SAP FIORI.
Iam getting the below error while accessing the data using odata service.
"Failed to load resource: the server responded with a status of 404 (Not found)"
"No 'Access-Control-Allow-Origin' header is present on the requested resource. Origin "
i have tried all the solutions like changing the url pattern "proxy/htttp".
and disabled - security in chrome (Chrome is Updated version).
i tried with IE still got the same problem.
And installed all the required software in eclipse
While installing GWPA plugin i got the following error.
let me know if any one have idea.
Thanks in advance.

> Do you want to add and/or update the data in the already existing tables or do you want to replace the content completely?
>
> so in that way :
> bot the options are fine what ever take less time.
Sorry mate, but YOU have to know what you want here.
I gave you an easy to follow set of steps.
As you don't seam to mind the outcome, just might just use them...
> I wanted to know weathe i can use the loadercli for thie export import or not? if yes then is there any new steps to do before i do the export import?
We had this discussion before...
>
> For that the easiest option would be just to drop the tables of SAPR3 and run the import again.
>
> For ease of use you could also just do:
> - logon as superdba
> - drop user SAPR3
> - create user SAPR3 password SOMEPW not exclusive dba
>
> After these steps you can easily pump the data into the database again.
>
> So here in th above given steps , i am creating a new SAPR3 user and why it is not exclusive dba ?
> i already have that user SAPR3 can i use the same.
Yes, you do have the SAPR3 user.
But you don't seem to like to read documentation or learn about how the tools work or anything like that.
Therefore I gave you s simple way to reach your goal.
Of course it's possible to reuse the user.
But then you would have to deal with already existing tables, already existing data etc.
You don't seem to be able to do that. So, the easy steps might be better suited for your needs.
regards,
Lars

ITunes was unable to load provider data from Sync Services. Reconnect or try again later

i just had this message for the fist time when trying to sync my iphone 4: "iTunes was unable to load provider data from Sync Services. Reconnect or try again later"
what i did is that:
- i unplugged my iphone 4
- clicked on "edit" in itunes, "Preferences", "devices", "reset synck history"
- Uninstalled itunes
- restarted the lap top
- reinstalled itunes
then i tired and the iphone synced fine. i tried it a few times and it was fine.
but i have 2 questions:
1- could this be cause by excessive syncing, since i do sync my phone almost twice a week.
2- is what i did good enough for a solution or do i need to rename folders and resort to the other solutions provided?

OK
Here's what I did:
1. Copy all of the contents in C:\Program Files\Common Files\Apple\Apple Application Support to C:\Program Files\Common Files\Apple\Mobile Device Support folder, overwriting anything it if asked.
2. Rright-click on the Computer icon on your desktop (or in the start menu) and select Properties. Click on Advanced System Settings. Then clik on Environment Variables. If you don't have a user variable called PATH, click New... and add it, or select it and click Edit...
Now, add to the beginning of the user PATH the following two directories:
c:\program files\commmon files\apple\Apple Application Support
c:\program files\commmon files\apple\Mobile Device Support
Be sure to put a semi-colon (;) between the two directories.
Click OK three times to save your settings.
Step #2 might require a reboot.
After these 2 steps sync works again (touch wood).
Seems that sometimes there's an additional possibility (which I didn't perform):
If you are still having problems after following these steps, it's possible another application uses one of the same DLLs as iTunes (but a different version) and Windows is finding it in the PATH before the Apple file paths added above. You can check this by opening a DOS command prompt window and executing the following commands:
where libxml2.dll
where sqlite3.dll
where libtidy.dll
Examine the pathnames listed by these commands. If any paths are listed before the ...\Common Files\Apple\... paths, you'll want to remove those paths from the PATH environment variable.

When you try to send or to receive email in Outlook 2010, you may receive one of these error messages: 0x8004010F: Outlook data file cannot be accessed. or 0x8004010F: The operation failed. An object could not be found.

0x8004010F: The operation failed. An object could not be found.
1. reviewed Profile instructions
2. Ran SytTools thinking it would fix the error. NO although I could send received I ended up with a giant pst
3. Back to Profile Instructions.
4. Set up new profile with my email address. email address tested well. Run Outlook. loads as outlook data PST
and gmail address PST. Deleted all the Gmail subscriptions to improve speed. Original error was gone but have two GIGANIC PST FILES.
5. Set up another new profile with my email address and a named pst. Run Outlook under that Profile -
comes up with newly named pst and the gmail addrress pst (although I can't figure out where that pst is located. Will not let me use email address as default Profile. Tried different approaches and still ended up always with the gmail address pst. Deleted
all profiles but email address and comes up.
6. Should I just go ahead and use the gmail address pst I need to import data or download data from gmail
to get last years correspondence.e
7. Outlook is my lifeblood, I am in communications and every submitted email gets moved to a file with an update.
Help?
8. One option is to merge psts but might make worse mess.
Thanks. Beautiful Beach weather here!

To resolve error 0x8004010F , identify the current location of your default Outlook data file, and then create a new Outlook profile.
Step 1- Locate the default Outlook data file
Click Start, and then click Control Panel.
In Control Panel, click Mail.
In the Mail Setup - Outlook dialog box, click Show Profiles.
Select your current Outlook profile, and then click Properties.
In the Mail Setup - Outlook dialog box, click Data Files.
Select the Data Files tab in the Account Settings dialog box, and then note the name and location of the default data file for your profile (a check mark will denote the default data file).
Click Close.
Step 2 - Create a new Outlook profile
Step 3 - Configure your new Outlook profile as the default profile
More detailed steps you can refer to this KB article:
http://support.microsoft.com/kb/2659085

Error in Loading Meta Data File for Service 'CL_ACCOUNTING_DOCUMENT_DP'

Similar Messages

Maybe you are looking for