Error in Loading Project master Data into BW from R3

Hi Experts,
Actually I am trying to load Project Master Data from R3 to BW through a BW Process chain, Its a daily activity which we are performing since long time.
But since last 2 days loading is getting failed with an error in ST22 in source system (R3):
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
Exception              CX_SY_REF_IS_INITIAL
Date and Time          27.09.2011 01:47:15
Short text
     Access via 'NULL' object reference not possible.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "CL_CGPL_TASK==================CP" had to be
      terminated because it has
     come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
     caught in
    procedure "PREPARE_FOR_RELOAD" "(METHOD)", nor was it propagated by a RAISING
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    You attempted to use a 'NULL' object reference (points to 'nothing')
    access a component (variable: "ME->OUTLINE_PARENT").
    An object reference must point to an object (an instance of a class)
    before it can be used to access components.
    Either the reference was never set or it was set to 'NULL' using the
    CLEAR statement.
I tried to reload the data but no help, I am not sure how to reolve this issue, I also contacted to BASIS even they are not aware of this error.
I am seeking help from you guys.
Please help to overcome this problem...!
Thanks.

it seems basis issue
howver check below links
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/objects_objref_not_assigned-1793688
OBJECTS_OBJREF_NOT_ASSIGNED error in a background execution
thanks
pathak

Similar Messages

Error while loading the master data into hierarchy

Hi,
When i am trying to load the master data into a hierarchy, it is showing me the following error.
"Invalid Entry, hierarchy xxxxxx does not exist".
Can you please tell me what might be the possible cause for this error.
Thanks,
Prateek

Hello
Have you created a hierarchy, I mean go to Transfer structure->Hierarchy structure
->create hierarchy, put a check of whether it is sorted or time dependent etc. after that while loading data through infopackage just check that you have selected an appropriate hierarchy name in hierarchy selection tab.
Hope it will help!!
Regards,
Sandeep

Loading InfoObject master data into Cube

Hi Guys,
I have a question. I created an InfoObject as a data target and loaded data into that data target. I created a cube and I want to include this infoobject in the cube. Now How do I load data into this cube from the InfoObject.Because the InfoObject doesnt have any option to select data targets, since it is master data.
Data is being loaded into the InfoObejct. But when I check the cube there is no data.
How do I load this master data into the cube without update rules?
Thanks in advance.

Hi,
i think u need load some value to transaction data so that you can report on it, but how you are going to decide which row will be having which value from master data? in general value for this should come from transactional data, or you could assign some constant value to it.
Do you want to use any attribute of Inoobject in report? And if you have any key value for that coming from Transaction data, you can use rule type as read from master data
It depends upon your requirememt.
Since you want to restrict the values of the cube which are going into the report then you should include this object into the cube.
In any case if you want to restrict the value of the transactional data in the cube with either the value of the objects ot the attributes of object you will have to add this object into the cube.
As you said you can load master data and use in report but how you are going to use it..............you will have to include it in the cube to use it.
Also you can check whether this object is attribute of some other object already in the cube in that case you can make it navigation attribute and then use it for the restrictions in the cube.
In this case only you do need to add it to the cube,But if it not an attribute of any object then you must add it to the cube.
You have to get the value of your infoobject into Cube from datasource, even though you want to use attributes only.
You will have to add it and it wont have any effect the transaction data getting loaded into the cube will be different from the master data only SID's are matched during loading of the data.
You should load separate master data into the 0recontract infoobject with the master data source and make the respective object contract type and contract category as navigation there.
Also you should add 0recontract to the cube and update it from the transaction data source as you have said that it can be updated.
Then just do the normal restrication at the report level
You can make this display attribute as naviagatioonal first in the master data object and then in the cube make this attribute as navigational.
then you can use it to restrict in the cube
You can use Category as InfoObject in your cube, and while loading data for your infoobject in the rule type you can use option as reading from master data. It will take key of infoobject, and will update attribute value in your cube.
http://help.sap.com/saphelp_nw04s/helpdata/en/e5/f913426908ca7ee10000000a1550b0/content.htm
You can also restrict with attributes value, Just in the restrcition of your infoobject in query designer, slelect left-botton button of 'Dipaly Other Values', here you can select you attribute and its value for restriction as well
Regards,
Hareesh

Error when loading the master data

Hi all,
Can anybody help me out. I am loading the master data from DB Connect source. When i am trying to load it it is giving the runtime error PERFORM_CONFLICT_TAB_TYPE. Can anybody tell me what could be the problem & necessery steps to take.
Thanks in advance.
Regards,
Shaik.

Hi,
Please go through the following threads:
PERFORM_CONFLICT_TAB_TYPE shortdump during data loading into ODS
Perform_conflict_tab_type error
PERFORM_CONFLICT_TAB_TYPE error-Urgent!!
Next time you might want to just search the forum first... lots of surprises!
Hope this helps,
Cheers,
Gimmo

Error while loading 0Plant master data in PSA

Hi,
i am trying to load attributes master data for 0PLANT, but in PSA i get the following error:
<i><b>'Record 1 :Plant CU : No sales organization found; Local currency cannot be checked'</b> .</i>
We are not using SD module and so no sales organization data is maintained have through a couple of posts posted here in SDN,and have applied the correction instructions manually as stated in OSS note : 750322.(As mentioned for case 3). But i still get the same error.

Hi,
The issue is due to errorneous record.
Delete the request in Master data and Try the following.
1) Goto PSA --> filter the Status (Red or Green)
Select the Red records and correct the data in which error is throwm.
After correcting the data, save and Right click PSA and give Start update immediately.
2) Load via Infopackage only to PSA and later update from PSA and check.
Any one of the above 2 methods will solve the issue.
Regards,
Balaji V

'Overlapping Time Intervals' error while loading the Master Data

Guys,
          Need you help with this. I am trying to load the Master Data (attribute) for InfoObject 0FMD_FRSITM using DTP from DataSource 0FMD_FRSITM_ATTR and am getting an error 'Overlapping Time Intervals'.
This is happening due to overlapping Valid From/Valid To date's for the same Financial Statement Item (0FMD_FRSITM) with different Editions.
If I select the option 'Ignore Duplicate Records' while loading the data, it is successful. But not all the records are loads and Editions are missing.
Below is an example of how the data looks like.
FRSITM         Valid To                  Valid From                 Edition
1001             12/31/9999             04/01/2010                2010.1.1
1001             01/31/2010             03/01/2010                2010.1.2
1001             12/31/9999             02/01/2010                2010.1.3
In the above scenario, the Valid To Data for record 1 and record 3 is the same (12/31/9999) and the record 3 is being ignore when I select the option 'Ignore Duplicate Records'.
And also I see that the Edition is not the Key Field.
Any suggestions or ideas? Appreciate your help.
Thanks.

FRSITM Valid To Valid From Edition
1001 12/31/9999 04/01/2010 2010.1.1
1001 01/31/2010 03/01/2010 2010.1.2
1001 12/31/9999 02/01/2010 2010.1.3
1. While selecting ignore duplicate, make sure to-date is not part of symantic key.
2. if system comes across two same records it picks up the latest one.
3. It shall merge the timelines is overlap is found.
4. I hope Edition is time dependent attribute
I believe infoobjet key is FRSITM Valid To.
In your case because first record has more period and may be the latets record system ignore the earlier one with the same time interval.
have a look at Q table and you shall be able to figure out for your self.
Hope it helps
Vikash

Getting the error while loading the master data

Hi
i have tried to delete the master data using right click and delete master data, but still there are data.
Now i am trying to load this master data again then i am getting the message "0 from 50033 records"
and data load got failed with error message "master data/text of 0vendor already deleted "
and due to this i could not able to load my other infoprovider (which have 0 vendor).
can any body help me, it very urgent...
thanks and regards
Anupam

Hi Raju,
I assume there are no routines written in the update rules and also you ae directly loading the data from R/3 ( not from any ODS). If that is the case then it could be that, the data maintained in R/3 has overlapping time intervals (since time dependency of attributes is involved). Check your PSA if the same profit center has time intervals which over lap. In that case, you need to get this fixed in R/3. If there are no overlapping time intervals, you can simply increase the error tolerance limit in your info-package and repeat the load.
Hope this helps you.
Thanks & Regards,
Nithin Reddy.

Error while loading the master data

Hi Masters,
When I tried to load the master data, data was not loaded. Monitor tells, in YELLOW color (0 records from 0). Status telling following things
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
Could you please help me...
Thanks & Regards
Raja.S

Hi,
Check the TRFC log.
You can get to this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Removing errors:
If the TRFC is incorrect, check whether the source system is completely connected to the SAP BW. Check especially the authorizations of the background user in the source system.
Resolutions:
Reload the Master Data manually again from Info-package at RSA1.

Error while loading customer master data through Idoc (DEBMAS) from BODS

Hi All,
I am trying to load customer master data from BODS to SAP ECC through IDOC(DEBMAS). The jobs run successfully but IDOC is not getting posted. Please find the error below.
I checked in TSKD table the entry 0 is present. Please help me to resolve this issue.
Thanks & Regards,
Balamurugan G

Hi, did you referred this link : Error during customer master mass update through XD99

Error while loading to Master data attribute 0product

Hi experts,
While loading the data from 0material to 0product master data attribute i am getting a error ' 0MATERIAL : Data record 2421 (''300000072 '):Version '300000072 ' is not valid. I request u all to help me to solve this error.
Diagnosis
    Data record 2421 & with the key '300000072 &' is invalid in value
    '300000072 &' of the attribute/characteristic 0MATERIAL &.
System Response
    The system has recognized that the value mentioned above is invalid, and
    has processed this general error message. A subsequent message may give
    you more information on the error. This message refers to the same
    value, even though it does not state this explicitly.
Procedure
    If this message appears during a data load, maintain the attribute in
    the PSA maintenance screens. If this message appears in the master data
    maintenance screens, leave the transaction and call it again. This
    allows you to maintain your master data.
Please let me know what could be the problem....
Regards,
Prashanth
Edited by: Prashanth Shetty on Jul 16, 2008 7:42 AM

Hi,
   The issue is due to errorneous record.
Delete the request in Master data and Try the following.
1) Goto PSA --> filter the Status (Red or Green)
Select the Red records and correct the data in which error is throwm.
After correcting the data, save and Right click PSA and give Start update immediately.
2) Load via Infopackage only to PSA and later update from PSA and check.
Any one of the above 2 methods will solve the issue.
Regards,
Balaji V

Error while loading to master data infoobject hierarchy (0RPM_PORT_ITEM_HIERARCHY)

Hi All,
I have an issue while loading the data from psa to master data infoobject.
DTP Error:
When we had extracted the data from ECC to PSA, the values for field "IOBJNM" are not populated for 0RPM_PORT_ITEM_HIERARCHY
Thus it is throwing an error while populating this data to the target.
From where this field will fetch the values?
Why these values are not being populated from ECC?
Will there be any issue from BI side? can anyone help me on this.

Hi Raman,
yes I had extracted data in RSA3
There are no values for the field "object".
Do you have any idea why these values are missing?

Getting Duplicate data Records error while loading the Master data.

Hi All,
We are getting Duplicate data Records error while loading the Profit centre Master data. Master data contains time dependent attributes.
the load is direct update. So i made it red and tried to reloaded from PSA even though it is throwing same error.
I checked in PSA. Showing red which records have same Profit centre.
Could any one give us any suggestions to resolve the issues please.
Thanks & Regards,
Raju

Hi Raju,
I assume there are no routines written in the update rules and also you ae directly loading the data from R/3 ( not from any ODS). If that is the case then it could be that, the data maintained in R/3 has overlapping time intervals (since time dependency of attributes is involved). Check your PSA if the same profit center has time intervals which over lap. In that case, you need to get this fixed in R/3. If there are no overlapping time intervals, you can simply increase the error tolerance limit in your info-package and repeat the load.
Hope this helps you.
Thanks & Regards,
Nithin Reddy.

First Loading of Master data into ODS

Hello BW gurus,
I have read the below mentioned sentence in a material stating that
'By using flexible updating, it is possible to write master data from different sources into a consolidated object (master data ODS object) before this is stored in individual master data tables.'
1) why master data from different sources is being written into ODS first , before it is stored in individual Master Data tables ?
2) Is every master data from source systems first loaded into ODS before it is stored in individual Master Data tables?

hi,
1) why master data from different sources is being written into ODS first , before it is stored in individual Master Data tables ?
Ans - In real time scenarios y may have to load data from various source system (liks sap,non sap,flat file).also more than on r3 source system is also possible. hence to have consolidation of the master data based on source system we load master data to ods first. but is not always. one few master datas like - Batch number,delivery number,invoice number. u can also load directly to master data tables using direct update.
2) Is every master data from source systems first loaded into ODS before it is stored in individual Master Data tables?
not mandatory, it depends on requirement.
Ramesh

Data error when loading to master data?

Hi,
I am loading data from Data base to BW.It is a master data loading.I got an error in the 8th package of the load for the time field which is server update time(reference 0TIME) .The data server update time for that particular record is '19900101'.I am really confused what is the error with this kind of data?
Here is error message:
0TIME: Data record 1797 ('3YV4C0EJBWTGO1CA'): Version '199001' is not valid
Message no. RSDMD194
Diagnosis
Data record 2. with the key '3.' is invalid in value '4.' of the attribute/characteristic 1..
System Response
The system has recognized that the value mentioned above is invalid, and has processed this general error message. A subsequent message may give you more information on the error. This message refers to the same value, even though it does not state this explicitly.
Procedure
If this message appears during a data load, maintain the attribute in the PSA maintenance screens. If this message appears in the master data maintenance screens, leave the transaction and call it again. This allows you to maintain your master data.
Please help me to resolve this also explain what is the differnce in this kind of data?
Thanks,
Vasu

right click on the master data --> delete master date, BUT you will only be able to delete master data not used in a cube (you'll get a pop up to confirm this)...if you want to delete master data already used in a cube, you need to delete the contents of this cube first (and any other cube where this master data is used)...only then you can completely delete the master data entries
M.

Getting error while loading omaterial master data

Hi all,
I am loading data to omaterial_attr .i am getting an error material number version is invalid.but in source system itself it shows that perticular material number master data also.what's the problem? there are totally 3000 records.only for 100 records i am getting that error.but in sourcesystem(r/3) i have all these material number values also.
0MATERIAL : Data record 12 ('A02 '): Version 'A02 ' is not valid

Hi Rama,
I dont think this error is due to space because if u have specified ALL_CAPITALS in RSKC then space is included in it by default. Moreover, there wont be any space in ur data in PSA.
Have you maintained the material number format???? If not, this error can come.
Assign points if this helps.
Regards,

Error in Loading Project master Data into BW from R3

Similar Messages

Maybe you are looking for