Error in loading report

Hi to all
I have problem with loading report.
i have connection to oracle database by third party driver(i made odbc by this driver).
when i design my report is not problem and even see preview report by live informations.
but when i want to test my report in windows application the report not load and prompt me that for connection need more information.
this third party driver have specific log in window.when i design report for connection prompt the third party window but when i test application only simple window demonstrated and only want me username and password.
i want to prompt me third party log in window to connect database but i dont how can do it.
please help me .
thx

You don't say what version of CR you are using and this may turn out to be very important info. However, as this is a non standard database driver, requiring non standard login, your solution may be to create a dataset off of the database and then pass the dataset to the report. I this way, the logon is handled by you outside of CR and thus CR does not require to log on to the database. The only other option is to try to use the RAS inPorc SDK - but this will depend on the version of CR you are using. For more info on RAS database login properties see [this|https://wiki.sdn.sap.com/wiki/display/BOBJ/ReportApplicationServerDatabaseConnectivity] wiki. The wiki provides some basic info as well as tips on how to get and set database logon properties. However if this does not help you out, datasets will be the only way to go.
Ludek

Similar Messages

Report Designer - Error when Loading Report

Hi,
We have created a report in Report Designer (7.0) and saved it. When we execute it runs fine. After closing the report and trying to reopen it, the report does not open. It gives an error "Error when Loading Report". Our BI frontend patch is 14.
Did anyone encounter this issue and is there a solution to this.
Thanks
Hemant

Hello,
Please go to SE38 -> RS_REPORT_MAINTAIN,
Type your report name, and DT als "Report Type".
Goto edit mode, copy&paste this XML into txt file and send it to me ([email protected]). I will check whats going on with this report. Loading should be always possible.
Regards, Karol Kalisz, BI Development

Error while loading Reported Financial Data from Data Stream

Hi Guys,
I'm facing the following error while loading Reported Financial Data from Data Stream:
Message no. UCD1003: Item "Blank" is not defined in Cons Chart of Accts 01
The message appears in Target Data. Item is not filled in almost 50% of the target data records and the error message appears.
Upon deeper analysis I found that Some Items are defined with Dr./Cr. sign of + and with no breakdown. When these items appear as negative (Cr.) in the Source Data, they are not properly loaded to the target data. Item is not filled up, hence causing the error.
For Example: Item "114190 - Prepayments" is defined with + Debit/Credit Sign. When it is posted as negative / Credit in the source data, it is not properly written to the target.
Should I need to define any breakdown category for these items? I think there's something wrong with the Item definitions OR I'm missing something....
I would highly appreciate your quick assistance in this.
Kind regards,
Amir

Found the answer with OSS Note: 642591.....
Thanks

New XI serv install - get 'unexpected error' when loading report to package

Brand new install of Crystal Enterprise XI R2. I've setup an object package. When I try to add a crystal report I get 'unexpected error' massage. Any help would be appreciated.

Hello Kraig,
Please post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum:
That forum is monitored by qualified technicians and you will get a faster response there.
Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
Thanks a lot,
Falk

"Load Report Failed" Error after upgrading to CR XI R2 and VS 2005

Previously I had visual studio 2003 and crystal report XI and on my website project and I have this function where users can download their monthly statement. and it was working fine. here is my code of the function...
Private Sub cmdStatement_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdStatement.Click
        Dim pReport As New ReportDocument
        pReport = New ReportDocument()
        Try
            'Dim pTable As Table
            pReport.Load(Server.MapPath(".") & "\reports\MonthlyStatement.rpt")
            pReport.SetDatabaseLogon(dbUser, dbPassword, dbServer, dbDatabase)
            pReport.RecordSelectionFormula = "{CCMSC.CID}='" & mCID & "'"
            Dim pArray() As String =
            DataAccess.SqlPublic.ExecuteDataset(cnString, "webDownloadEStatement", pArray)
            Response.ClearContent()
            Response.ClearHeaders()
            Response.ContentType = "application/pdf"
            pReport.ExportToHttpResponse(CrystalDecisions.[Shared].ExportFormatType.PortableDocFormat, Response, True, "DebtHelper_" & mCID & "_MonthlyStatement")
            pReport.Dispose()
        Catch ex As Exception
            divMessage.Visible = True
            lblMessage.Text = ex.Message
        Finally
            pReport.Dispose()
        End Try
    End Sub
Now, recently I upgraded my crystal to CR XI Release 2 SP6 and also upgraded my web project to Visual Studio 2005 with .NET 2.0. and now it gives me "report load failed" error on the very first line pReport.Load(......)
The project has updated the references related to crystal reports to the 11.5 version from 11.0. Not sure what am I missing here.
I have also opened the report file in the new crystal and saved it. I also opened it in Visual Studio itself and saved it.
I would appreciate any help possible.
Thanks
Raj

Hi! Ludek,
I have tried to hard code the path. I checked the win/temp folder and the aspnet account already has the read/write permissions.
Below is the detailed error message:
Error Message: Load report failed.
Page Error Occurred: /MyDebthelper/reports.aspx
ExceptionType: System.Exception
Inner Exception: System.Runtime.InteropServices.COMException (0x800001F5): The Report Application Server failed at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
Stack Trace: at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename) at MyDebthelper.reports.cmdStatement_Click(Object sender, EventArgs e) in C:\Documents and Settings\RBhavsar\My Documents\Visual Studio 2005\Projects\MyDebtHelper\MyDebthelper\reports.aspx.vb:line 83 at System.Web.UI.WebControls.Button.OnClick(EventArgs e) at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Thanks
Raj
Edited by: debthelper on Apr 30, 2010 5:21 PM

Load Report Failed Error

LOAD REPORT ERROR
We are working on the Crystal Reports version 2008 sp3 (12.0) with windows application. When the user tries to open more than 75 reports, this error is occurring. Please give us suggestion to resolve this issue.
We have tried following Code changes.
1.In Registry Settings Job Limit i changed to -1
2.Released all the report document objects once report generated.
ReportDocument.Close();
ReportDocument.Dispose();
3.GC.Collect();
GC.Collect();
GC.WaitForPendingFinalizers();
GC.Collect();
Eventhough still i am getting error like "Load Report Failed"
"The maximum report processing jobs limit configured by your system administrator has been reached."
Once Report document objects are reached 75.how to decrese it?(without closing application)
How can we resolve this issue.Any other suggestion are there for decreasing report document objects in crystal Engine.
Please suggest me.
Thanks in Advance.

There are two distinct concepts to consider:
1) Concurrent Processor License (CPL)
The CR engine is limited to 3CPL meaning that 3 concurrent reports can be processed by the report engine. Subsequent requests are queued up and processed as a license becomes available (in the event viewer you may see messages along the lines of; job x submitted, waiting y seconds for available license). The .close and .dispose methods free up memory taken up processing a report. Not doing so, increases memory used until there is no more memory to be had, leading to issue such as loading of reports, unstable computers and crashes.
2) Print Job
A Print Job is defined as almost any job a report is requested to do. E.g.; paging is a Print Job, Zooming, subreport, etc. One report could have 75+ print jobs associated with it simply by putting a subreport into a detail section which contains 75+ records and the subreport runs per each record. I suspect this is where your issue lies. There is a way to increase the number of print jobs, however the engine is optimized for this number and increasing it may lead to unanticipated consequences. See the article [Crystal Reports Maximum Report Processing Jobs Limit|http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/f053713e-3e3d-2c10-2a81-f79259e54023]. One note on the above article. I mention that setting the value to 0 essentially removes the limit. While that is true in certain cases, doing so is playing with fire....
One other article to take note of is [Troubleshooting the error; Load Report Failed|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d02f7cd3-f18b-2d10-55ad-dab2200f68fc]
- Ludek

Crystal 10 Reports fail with error: "Load Report Failed"

Hi,
this seems to be a mystery. A client has Crystal 10 reports run from a Visual Studio 2003 application (.NET 1.1) running fine on and old server.
Once the .NET application is installed on a new Windows 2003 server, all Crystal 10 reports fail with the error message: "Load report failed" Source: CrystalDecisions.CrystalReport.Engine.
I set the worker process in the application pool to "system admin" and all Crystal reports failed. I had thought it was a security issue. I even removed Crystal 10 and installed Crystall XI Developer Edition and all reports raised the exact same error message from CrystalDecisions.CrystalReport.Engine.
Crystal does call the stored procedure to retrieve the data but cannot load the PDF. I have used 3 different physical servers, one Win 2003 64-bit and two Win 2003 32-bit and get the same error.
Help!
Thanks

Hi Mak,
It seems that you are having issue with SDK's.
Post your question in Business Objects SDK Application Development ->
.NET Development - Crystal Reports Forum.
That forum is monitored by qualified technicians and you will get a faster response there. Also, all SDK's queries remain in one place and thus can be easily searched in one place.
Thank you for your understanding,
Shweta

'Load report failed' msg reported by CrystalDecisions.CrystalReports.Engine

Dear member,
We are using Crystal Report viewer (Version 11.5) from our Web based product on Windows Server 2003.
Sometime when we run the report generating application we get the error message 'Load report failed'.
So far, we don't find any problem in our product.
Has someone experienced a similar problem?
How did you solve the issue?
Thanks and best regards,
Makoto
Below are the error messages detail logged on event logs.
Event Type:     Error
Event Source:     AvantGard eTreasury
Event Category:     None
Event ID:     140
Date:          4/02/2011
Time:          2:21:31 PM
User:          N/A
Computer:     JP0010SWFIN41
Description:
The description for Event ID ( 140 ) in Source ( AvantGard eTreasury ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Source: CrystalDecisions.CrystalReports.Engine
Target: EnsureDocumentIsOpened
Function: .Initialise
Message: Load report failed..
Event Type:     Error
Event Source:     AvantGard eTreasury
Event Category:     None
Event ID:     140
Date:          4/02/2011
Time:          2:14:18 PM
User:          N/A
Computer:     JP0010SWFIN41
Description:
The description for Event ID ( 140 ) in Source ( AvantGard eTreasury ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Source: CrystalDecisions.CrystalReports.Engine
Target: PEOpenEngineEx
Function: .Initialise
Message: Attempted to read or write protected memory. This is often an indication that other memory is corrupt..

Make sure you are closing and disposing of the report object once you are finished with them.
What Service Pack are you on?
Thank you
Don

Error in report generation-Load report failed

I have installed crystal reports for VS2005 runtime in my live environment.When i try to load the report file from a .Net page i am getting the error'Error in Report generation-Load report failed'.
This works fine in development and testing but when moved to production we are having issues.
I believe i have a workaround i.e i need to open the rpt in a VS 2005 environment and re-write the connection string again.This fix had worked in development and testing when we had the same issue.
But not sure if this is a known issue with crystal reports and if so do we have any hot fixes for the same.
Please help.

Hi Don,
The reason why i posted the item on 'data Connectivity issues' is because i suspect the problem is with the connection string.Though i had provided the correct connection string,re-writing the connection string with the same info might help to fix the issue with loading the report.
Does it mean that there is a problem in the connectivity?
I have a risk here that i cant re-write the connection string..i.e to open the RPT file in VS2005 and bind it.The production web server & database server sits in a third party environment and it is not in the company network.So i cant connect to this server to re-write from any other severs in the network.
Is there any fix which can applied to the server to get this issue resolved?
Cheers
Nithya.

Crystal Reports with VS2005 - Load Report failed Error....

Post Author: rajeshvijayan
CA Forum: Older Products
Hi,
I am running Crystal Reports viewer on IIS6.0 and windows server 2003, which was installed using the redistributable package that comes along with Visual Studio 2005. We open these reports through a web based application 1 which is run on a different application pool on IIS. We have about 3 to 4 other web applications runing on the same IIS. All the other Web applications are working fine.
This web application 1 has 2 parts - one is the normal data display quiries from the back end SQL server 2005 and the other is the Crystal Reports which also quires data from SQL Server 2005. At times i find that these reports all of them throw an error - Load Report Failed. At the same time the Part 1 of this application does work fine in showing the data that is queried from the database. Moreover at this stage, I dont find any errors in the Event viewer. If i restart this application pool alone, the reports starts working fine again.
I had gone through a few of the news groups and have made all the necessary permission related changes like the TEMP Folder, ASP.NET temporary folder, the folder in which the crystal reports is placed etc but still the same error throws up after some point in time. Wanted to know if there is any special configuration required on the Application pool when it comes to Crystal Reports. We have bout 10 to 15 users using this application for testing and it only throws this error at times and not always.
Looking forward to any kind of solution from your side.
Regards
Rajesh

Post Author: mikeeby
CA Forum: Deployment
Yes I too have been fighting this problem. I was using a XML Data file and schema file for my u201Cdatabase templateu201D in the report. I would then run my query using the .NET SQLClient then fill the report with my dataset table using the SetDataSource method from the ReportDocument object.
I tried both embedded and runtime loaded reports all worked fine on my development machine but would NOT work on my production server. I use all the server installs, played with user rights, registering DLLu2019s still nothing. I went as far as creating a winform app to fix the problem. I then had exactly the same problem, I was catching the error and it originated from the viewer control in both winform and webforms.
What finally worked for me was to attach to the database using OLE DB instead of XML/schema (xml/xsd) datasource then pasting my SQL Query into the database connection command this gave me the fields to build the report. I actually used the u201CSet Database Locationu201D Dialog in Crystal Reports so I didnu2019t have to redesign my report. This dialog works very weird but I managed to figure it out. I then used an embedded report and all seem to be well. I think there is a problem with the Crystal Reports .NET Server Install and Merge Modules used with .NET with XML files, but I cannot be sure, all I know is this worked for me.
I am concerned that if my database server is moved or renamed my report might break because the server connection is embedded in the report, but for right now it is working. I thought that was the reason for using the xsd file was to eliminate the dependence on a server connection in the report.
Good luck and I hope this helps you fix your problem too. If it does please let me know I have see so many reports of people asking questions about this problem and it seems like most are left hanging.
Mike

Unable to load report error

Hi
This started with an asp.net application which I have been maintaining for several years, on an XP 32-bits box. Alas, the box died, and I have acquired a new Development machine, now with Windows 7/64-bits. I have installed Visual Studio 2010 and Crystal reports (13.0.,9), including runtime for 32 and 64 bits.
I got the "unable to load report" error, and I think I have tried everything I could find on the web related to solving this issue.
Finally I got Down to creating a new dummy asp.net application with a dummy report just displying the text TEST. This report Works fine when run from within VS, but if I deploy it to the web server on the Development machine I also get the unable to load report failure.
I believe this is a configuration issue. The application has run fine for years, I just can't get it to Work on the new development machine.
Please help
Peter

Make sure that process has read / write rights to the %TEMP% folder. Process Monitor may help.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Crystal report error while loading the file

We are facing a customer issue that the reports are not getting previewed from the citix environment. It is not able to find the path of the reports. This the error that they are getting
2014-07-09 11:54:11,159 [1] ReportingEngine.LogMessages ERROR - Error in Report Engine : Internal Error: Error occured while previewing.
CrystalDecisions.Shared.CrystalReportsException: Load report failed. ---> System.Runtime.InteropServices.COMException: The system cannot find the path specified.
at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options)
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
--- End of inner exception stack trace ---
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
at ReportingEngine.CrystalReportTool.ConfigureReport()
at ReportingEngine.PeriopReport.ExecuteReport()
This happens only from the citrix environment.
The customer is using Citrix XenApp 6.5
Operating system : Windows Server 2008 R2 standard
System type = 64 bit
Crystal Report Version 2008

Hello,
It's exactly what it says, the path to the report is not correct, user does not have permission to it or it simply doesn't exist.
Check Ctrix's Forum, there are known issues with it and CR.
Don

Bex Report Designer: Error while loading metadata

hi experts,
I am working with BI7 Bex Report Designer and we are using SP9. when i tried to load the Query in Report Designer its giving below error.
Error while loading metadata.
Check the Query and portal settings.(but the query is working fine in Analyzer).
and its giving message class RSBOLAP, message number 018 and Description is java system error: incoming call is not authorized.
when i double click the error its giving below error details.
Diagnosis
An error occurred in the BI components on the SAP J2EE Engine.
System Response
Procedure
Contact your system administrator to have the error analyzed in detail.
Procedure for System Administration
Start the Visual Administrator, log on to the SAP J2EE Engine and choose "<J2EE_SID>" ->"Server" -> "Services" -> "Log Viewer".
The file "defaultTrace.trc" includes detailed information about the error that occurred. In Windows, you can find this file in the Log Viewer under "Cluster <computer name>" -> "Server <server number>" -> "<drive>:\usr\sap\<SID>\JC<INSTANCE>\j2ee\cluster\server<NUMBER>\log". ". In Unix, the file is located under "/usr/sap/<SID>/JC<INSTANCE>/j2ee/cluster/server<NUMBER>/log".
If the file does not include enough detail about the error, you can increase the log level to obtain more information. To do this, choose "<J2EE_SID>" -> "Server" -> "Services" -> "Log Configurator". On the "Locations" tab page, choose "com" -> "sap" -> "ip" -> "bi" -> "webapplications". Using the selection list on the right side of the screen, you can increase the log level, whereby "DEBUG" represents the log level with the most information. You can save your settings by choosing the "Save" icon. The change to the log level is active immediately. Once you have successfully analyzed the error, you should set the log level back to its default value using the appropriate pushbutton; continuous writing to the log file negatively affects the overall performance of the system.
could you plz suggest me how to rectify the problem.
regards
vadlamudi

Hi vadlamudi
The error message RSBOLAP 018 means, that the ABAP stack can't communicate with the Java Stack.
1) Please ensure, that the user, used for the Report Designer, is valid in the Portal too. Depending on the user management setup this means that there either needs to be the same user or an assigned user in the Portal.
2) In case the user is valid, it means a basic misconfiguration according to note 937697. In this case please run the Support Desk Tool and ensure, that all checks are green. Please ensure, that the latest version of the Support Desk Tool is used.
Regards,
Janine

Load Report Failed - Report Application Server Failed error at runtime

Hello, I'm pretty new to Crystal Reports so please bear with me.
I just installed CR 2008 on my development box, which is running VS2005 .NET 2.0. I changed over all of my assembly references in my web.config to the new version:
<add assembly="CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.Shared, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.ReportSource, Version=12.0.2000.0, Culture=neutral,
PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.Enterprise.Framework, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.Enterprise.Desktop.Report, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.ReportAppServer.Controllers, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.CrystalReports.Engine, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.Enterprise.InfoStore, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.Enterprise.Viewing.ReportSource, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
Also the webpage that is displaying the ReportViewer object has this reference as well:
<%@ Register Assembly="CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"
    Namespace="CrystalDecisions.Web" TagPrefix="CR" %>
Now, in my code behind I am simply trying to open a pre-built crystal report that came in the sample pack
When I try and do this in our already built website I get an error:
"Load report failed"
With the inner exception saying:
"The Report Application Server failed"
This same piece of code works perfectly if I build a new website, however when I try and impliment this into our existing code base I get the error shown above. Also the samples I've used all use .NET 3.5 and the website is in 2.0. I'm not sure if that is a factor or not but that is also another piece of information that could be useful.
Any help on this matter would be greatly appreciated. Thank you for you're time.
Chris McMahan
Edited by: Arithal on Aug 4, 2009 8:36 PM

And finally the stack trace. Sorry for the length of these posts.
[COMException (0x800001f5): The Report Application Server failed]
   CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) +0
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) +126
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +575
[CrystalReportsException: Load report failed.]
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +646
   CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) +1374
   CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename) +169
   Report_Viewer_Crystal_CrystalView.ConfigureCrystalReports() in c:\Inetpub\wwwroot\Report Viewer\Crystal\CrystalView.aspx.cs:49
   Report_Viewer_Crystal_CrystalView.Page_Init(Object sender, EventArgs e) in c:\Inetpub\wwwroot\Report Viewer\Crystal\CrystalView.aspx.cs:33
   System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +15
   System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +33
   System.Web.UI.Control.OnInit(EventArgs e) +99
   System.Web.UI.Page.OnInit(EventArgs e) +9
   System.Web.UI.Control.InitRecursive(Control namingContainer) +321
   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +834

Crystal Report Error in Windows Server 2012 - Load Report Failed

Badly needed help regarding the above topic. Thanks in advance for helping.
We have a web application experiencing this error after deployment in WinServer 2012 IIS 8. Previously, the application was deployed in WinServer 2003 but we dont experience any errors like this. We tried searching the net for solutions and these are the following things we've try doing so far.
- Installed Crystalreportsviewer13 64 bit in Server. After that, transferred the asp_net client folder in the IIS folder same level of our application.
- We discovered that upon browsing the asp_net client in IIS itself, error 500.24 is appearing in the server. Checked the permission for folder asp_net client. Add IIS_USR permission read execute and write on the folder and still same Load Report Failed.
- Next we tried integrating the crystalreportsviewer13 inside the application same Load Report Failed error.
- Installed Service Pack 8 for CrystalReport but to no avail.
Is there any way to get the real error behind the "Load Report Failed" error? Also, is there any other way to determine what else can be done to resolve this issue? Thanks in advance.

Hi Jesse,
Use a try/catch block and see if this gives you more info:
catch (Exception ex)
MessageBox.Show("ERROR: " + ex.Message + " ;" + ex.InnerException.Message);
Response.write of course...
Make sure you have permissions set for sharing the report folder also, could be simply a permission error on the report folder.
Fiddler may give you more details also
Don

Error in loading report

Similar Messages

Maybe you are looking for