Error in logs when starting server

Hi,
when i am trying to start my app server on sunone. I am getting the following errors in the logs.
CORE1116: Sun ONE Application Server 7.0.0_01
SEVERE: CORE1227: NSS initialization failed: SEC_ERROR_BAD_DATABASE: Problem using certificate or key database: Certificate database: /apps/sunone/sun-appserver7/var/domains/domain1/nicks-8033/config/cert7.db.
Thus any one knows why this error comes. I have installed a SSL certificate on this server. Can it be that this certificate has not been installed properly.
Nikhil

Ok, I finally got it figured out.
I needed the original (to that HTTP Server ) modplsql.dll.
There was no PATH issue.
Once I got the oracle_apache.conf calling plsql.conf and marvel.conf, using the correct DADs, I was all set. I post my solutions to save others some grief.
The original Service Temporarily Unavailable message (Mozilla) was due to the fact that the HTMLDB_PUBLIC_USER account was locked after my upgrade.
Along the way, I ran into an access Forbidden error, which was caused by the incorrect password in the DAD.
Two simple things - unlock the HTMLDB_PUBLIC_USER acount, and of course make sure the DADs are correct.
And as soon as I can I will be contacting Anton to combine all into one HTTP Server -thanks!

Similar Messages

  • 'Error 8 occurred when starting the data extraction program'

    Hello Experts,
    I am trying to pull master data (Full upload) for a attribute. I am getting an error on BW side i.e. 'The error occurred in Service API .'
    So I checked in Source system and found that the an IDOC processing failure has occurred. The failure shows 'Error 8 occurred when starting the data extraction program'.
    But when I check the extractor through RSA3, it looks fine.
    Can someone inform what might be the reason of the failure for IDOC processing and how can this be avoided in future. Because the same problem kept occurring later as well.
    Thanks
    Regards,
    KP

    Hi,
    Chk the idocs from SM58 of source system are processing fine into ur target system(BI system)...?
    Chk thru Sm58 and give all * and target destination as ur BI system and execute and chk any entries pending there?
    rgds,
    Edited by: Krishna Rao on May 6, 2009 3:22 PM

  • "Error -42032" message when starting up iTunes 10.2

    Immediately after I upgraded my 15" MacBook Pro to iTunes 10.2 a couple of days ago I began getting this error message whenever I started up the program. After dismissing the error message iTunes seems to work fine. It's more of a nuisance than a major problem, but I'd like to resolve it if I can. Any ideas out there?
    Regards, Jim
    PS - the 10.2 upgrade works fine on my 24" iMac C2 Duo.

    Looks like I found the answer to my question.
    A colleague on the DealMac forum pointed me to an article at Ars Technica (http://arstechnica.com/civis/viewtopic.php?f=19&t=83766) which suggested that the problem lay in the invisible folder /users/shared/sc info. After making invisible files/folders visible using TinkerTool, I copied this folder to a work file on my desktop, trashed the originals, and then put the copy back. Voila! No more error -42032 message when starting iTunes!
    Regards, Jim

  • Error 16 code when starting up CS5, all I can do is uninstall and reinstall, How to fix this?

    Error 16 code when starting up CS5, all I can do is uninstall and reinstall. How to fix this?

    Hi Looze,
    System information would really help as suggested by Mylenium . I would also recommend going through the below mentioned Kb article to see if that resolves the query.
    Configuration error 16 | CC, CS
    Cheers,
    Kartikay Sharma

  • An unknown error occured (-42110) when starting iTunes current version.

    An unknown error occured (-42110) when starting iTunes current version on PC running Win 8 Pro x86. Tried to uninstall i''Tunes. But erratic behaviour when trying to install iTunes again. Get 2 choices, Repair or Delete. Choose Repair, but after some time I get the question: "Do I want to delete everythin in Itunes" Y/N. No matter if reply Y or N or close window, Installation program is terminated without any alterations (or so it says). What ?????

    A repair uninstalls all program files prior to reinstalling them. So the message asking whether or not you want to do that just reflects what has always happened. A repair install (like a standard uninstall, followed by a reinstall) doesn't touch content files under normal circumstances.
    If you think the wording is misleading, it's possible to give feedback directly to the Apple folks about it. Here's a link to the product feedback form for iTunes:
    http://www.apple.com/feedback/itunesapp.html

  • "Error 5" message when starting AE App

    Dear Community,
    I need your HELP, I downloaded AE but when I try to run it, it gives me a "Error 5" message - 
    I tried installing and reinstalling (with restart of the computer in between) but the error remains...
    HELP  & Thanks

    Looks like I found the answer to my question.
    A colleague on the DealMac forum pointed me to an article at Ars Technica (http://arstechnica.com/civis/viewtopic.php?f=19&t=83766) which suggested that the problem lay in the invisible folder /users/shared/sc info. After making invisible files/folders visible using TinkerTool, I copied this folder to a work file on my desktop, trashed the originals, and then put the copy back. Voila! No more error -42032 message when starting iTunes!
    Regards, Jim

  • Error when starting server from NetWeaver Studio

    I get the following error when i start the server from NetWeaver studio. Any reason why this error pops up.
    Problem Occurred:
    Startting Server - SAP Server E<24> (Time of error.....)
    Reason :
    JsfOpenAdmin failed: object not found.
    However I can start and stop the server from the management console.
    thanks,
    Sahir
    Edited by: Sahir Pathan on Jul 14, 2008 5:30 PM

    Hello Sahir,
    Can you post some other error logs ?
    Regards,
    Siddhesh

  • Error "Subscription Expired" when starting MUSE

    I recently installed MUSE CC as part of the ADOBE CREATIVE CLOUD. I have a current membership and are currently working with InDesign CC, Illustrator CC, Photoshop CC and even Dreamweaver CC in the same machine. I used the installer as with any other program but I get the attached  error when starting MUSE CC. Again, it does happen only with ADOBE MUSE, I am able to work with any other CC application. Moreover, I installed a trial version of MUSE CC on another computer following the suggestion of a ADOBE Support Rep, and I got the same error. I called again, and the support rep asked me to call on Monday!.
    Does anybody knows how to fix this bug? Many thanks in advance
    Best regards

    Hi,
    I already replied:
      - Mac OS X 10.9 but I also use a Dell Windows Laptop
       - No proxies or firewalls
       - I am able to use any other CC app such as Dreamweaver CC, Photoshop CC, Indesign CC, etc.
    This is the error log:
    Build 329: Mon Dec 2 04:58:48 2013 UTC: Error: CSI: OOBE: Serial Number: Error Code: O-10 Error Message: Unable to retrieve the serial number (Note: this may not be an error)
    Build 329: Mon Dec 2 04:58:48 2013 UTC: Error: CSI: OOBE: Serial Number: Error Code: O-10 Error Message: Unable to retrieve the serial number (Note: this may not be an error)
    Build 329: Mon Dec 2 05:00:36 2013 UTC: Error: CSI: OOBE: Serial Number: Error Code: O-10 Error Message: Unable to retrieve the serial number (Note: this may not be an error)
    Build 329: Mon Dec 2 05:00:36 2013 UTC: Error: CSI: OOBE: Serial Number: Error Code: O-10 Error Message: Unable to retrieve the serial number (Note: this may not be an error)
    Build 329: Mon Dec 2 05:00:38 2013 UTC: Error: CSI: OOBE: Serial Number: Error Code: O-10 Error Message: Unable to retrieve the serial number (Note: this may not be an error)
    Build 329: Mon Dec 2 05:00:38 2013 UTC: Error: CSI: OOBE: Serial Number: Error Code: O-10 Error Message: Unable to retrieve the serial number (Note: this may not be an error)
    Thanks

  • Access denied - CredentialAccessPermission - error in OIF when starting WLS

    All,
    In an existing 2-node OIF deployment, a new oif.ear file was deployed and following the deployment via WLS admin console, the application components are not accessible (e.g., accessing application component /fed/user/testspsso results in HTTP 500 error). Examining the WLS server (diagnostic) log, I find the CredentialAccessPermission error and trace listed below. In the WLS admin server log, I see references to the CA cert parsing errors such as:
    <Jun 14, 2012 8:32:15 AM MDT> <Notice> <Security> <<server_FQDN>> <AdminServer> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <e74b8846f6eaa8d9:7db63c9e:137eb60bbd9:-8000-0000000000000053> <1339684335728> <BEA-090898> <Ignoring the trusted CA certificate "CN=Entrust Root Certification Authority - G2,OU=(c) 2009 Entrust\, Inc. - for authorized use only,OU=See www.entrust.net/legal-terms,O=Entrust\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    I have reviewed other forum discussions about that error, but I think it's byproduct of the credential error (below). This could be wrong, but I suspect the expiration of a WLS-related repository credential, but I cannot identify which specific credential is the problem.
    Any thoughts or recommendations would be much appreciated!!
    Thank you!
    ~Mark
    WLS Server error:
    [2012-06-14T07:45:19.785-06:00] [wls_oif1] [ERROR] [FED-12064] [oracle.security.fed.controller.web.servlet.AbstractFedServlet] [tid: [STANDBY].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: e74b8846f6eaa8d9:6c0ea937:137eb3cf729:-8000-0000000000000002,0] [APP: oif] Exception: {0}[[
    java.security.AccessControlException: access denied (oracle.security.jps.service.credstore.CredentialAccessPermission context=SYSTEM,mapName=OIF,keyName=userldappassword read)
    at java.security.AccessControlContext.checkPermission(AccessControlContext.java:374)
    at java.security.AccessController.checkPermission(AccessController.java:546)
    at oracle.security.jps.util.JpsAuth$AuthorizationMechanism$3.checkPermission(JpsAuth.java:436)
    at oracle.security.jps.util.JpsAuth.checkPermission(JpsAuth.java:496)
    at oracle.security.jps.util.JpsAuth.checkPermission(JpsAuth.java:519)
    at oracle.security.jps.internal.credstore.util.CsfUtil.checkPermission(CsfUtil.java:612)
    at oracle.security.jps.internal.credstore.ssp.SspCredentialStore.containsCredential(SspCredentialStore.java:299)
    at oracle.security.fed.plugins.csf.CSFUtils$1.run(Unknown Source)
    at oracle.security.fed.plugins.csf.CSFUtils$1.run(Unknown Source)
    at oracle.security.fed.plugins.csf.CSFUtils.getPassword(Unknown Source)
    at oracle.security.fed.jvt.discovery.model.config.CSFConfigDiscoveryProvider.createMap(Unknown Source)
    at oracle.security.fed.jvt.discovery.model.config.CSFConfigDiscoveryProvider.locateProtocolConfiguration(Unknown Source)
    at oracle.security.fed.jvt.discovery.model.config.ChainingConfigDiscoveryProvider.locateProtocolConfiguration(Unknown Source)
    at oracle.security.fed.jvt.discovery.model.config.CachingConfigDiscoveryProvider.locateProtocolConfiguration(Unknown Source)
    at oracle.security.fed.jvt.discovery.model.session.MemoryActiveIdentityProviderFederationDiscoveryProvider.onRegistration(Unknown Source)
    at oracle.security.fed.jvt.discovery.DiscoveryRegistry.registerDiscoveryProvider(Unknown Source)
    at oracle.security.fed.jvt.discovery.util.BackEndInitializer.registerProvider(Unknown Source)
    at oracle.security.fed.jvt.discovery.util.BackEndInitializer.createDiscoveryRegistry(Unknown Source)
    at oracle.security.fed.controller.EventControllerImpl.getActionStateMachine(Unknown Source)
    at oracle.security.fed.controller.EventControllerImpl.processEvent(Unknown Source)
    at oracle.security.fed.controller.web.servlet.AbstractFedServlet.getServerConfiguration(Unknown Source)
    at oracle.security.fed.controller.web.servlet.AbstractFedServlet.initApplicationController(Unknown Source)
    at oracle.security.fed.controller.web.servlet.AbstractFedServlet.init(Unknown Source)
    at oracle.security.fed.controller.web.servlet.FederationServlet.init(Unknown Source)
    at javax.servlet.GenericServlet.init(GenericServlet.java:242)
    at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
    at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
    at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
    at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)
    at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1985)
    at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1959)
    at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1878)
    at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
    at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
    at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:485)
    at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
    at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
    at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
    at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
    at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
    at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:637)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
    at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
    at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
    at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
    at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
    at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
    at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
    at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:52)
    at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
    at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:31)
    at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
    at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)
    at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)
    at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
    at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)

    In my case, I had to untick the "Use TLS 1.0" option in Settings - Advanced - Cypher - Protocols. Don't know exact translation into English, got Italian localization. Adding screenshot for reference.
    [http://imageshack.us/photo/my-images/840/catturazz.jpg/ Screenshot]

  • AQ publish - DB subscribe: Error ORA-00942 when starting DB Adapter

    I am using AQ adapter to publish and DB adapter to subscribe.
    When starting the DB adapter i am receiving the following error:
    Fri Sep 09 13:22:50 MDT 2005: ** Error: Unknown error while db_bridge_reader_1 was trying to read messages from the database. Please save log files and contact the integration team.
    java.sql.SQLException: ORA-00942: table or view does not exist
         at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:189)
         at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:242)
         at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:554)
         at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1478)
         at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteDescribe(TTC7Protocol.java:677)
         at oracle.jdbc.driver.OracleStatement.doExecuteQuery(OracleStatement.java:2371)
         at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2660)
         at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:457)
         at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:387)
         at oracle.oai.agent.adapter.database.DBMessageReader.getNextMessageHeader(DBMessageReader.java:352)
         at oracle.oai.agent.adapter.database.DBMessageReader.run(DBMessageReader.java:232)
         at java.lang.Thread.run(Thread.java:534)
    The table i am inserting into using the DB adapter does exist in the subscribing DB. The only thing i can think of is some table/view is missing within the hub repository itself.
    Please help.
    Thanks!
    -MB

    Initially I would try calling the subscribe package standalone in SQL*plus or TOAD just to check its not somekind of config problem...
    The subscribing adapter trys calling the subscribing package passing in the message as an oracle data type.
    I would write a small pl/sql wrapper that calls you subscribing package outside of the runtime Interconnect environment. If this all works and you can insert data into the table then it maybe something to do with the metadata in the repository and then i'd go along with Ian's suggestion.
    But usually if you can successfully use iStudio to edi things then usually the repository is OK.
    Also from your log you can see that it has picked up the message and is trying to call the packaged/procedure so it looks like the adapter is working OK.
    Cheers Stuart.

  • Errors not logged when IKM Oracle Multi Record Insert is selected

    Dear All,
    I am new in ODI 11g and I am facing the following problem:
    I created a package with 3 Interfaces with Oracle Multi Record Insert.
    In the first interface I load the source data to a temporary target
    In the second interface target#1 table is loaded using interface#1
    In the third interface target#2 is loaded using interface#1 and the multiple insert is executed and committed.
    This works correctly, but when a data error occurs (e.g. mandatory column is null), instead of the error being logged in the Error table, execution of the last interface fails with the following error:
    Caused By: java.sql.SQLIntegrityConstraintViolationException: ORA-01400: cannot insert NULL into (<schema>.<table>.<column>)
    I noticed that when I use Oracle Incremental Update instead, the errors get logged correctly in the error table.
    Does anyone know what could be causing this?

    Hi Bhabani,
    Thanks for the reply.
    I am afraid that this is a major issue for me, I do not want to re-query the source table for each target table, but on the other hand I cannot fail the process for each invalid record and I need the logging.
    Can you think of a workaround for my use case?
    Thank you!

  • Error code -10810 when starting up any app

    Getting error code -10810 when I click to start any app in the Application folder. Only thing different I did this morning was upgrading coconutBattery. I'm guessing that's the culprit but would like to know what the error code means.

    From LSInfo.h in LaunchServices.framework
    kLSUnknownErr = -10810 /* Unexpected internal error */
    Essentially, Launch Services is hosed. I would suggest blowing away your Launch Services cache.
    1) Quit all running apps
    2) Go to /Library/Caches
    3) Move any file to the trash that has "com.apple.LaunchServices" in its name. (i.e. 'com.apple.LaunchServices-0230.csstore')
    4) Go to ~/Library/Preferences
    5) Move com.apple.LaunchServices.plist to the Trash
    6) Restart
    Hope that helps.

  • Error ORA - 12637 when start Oracle 8i Personnel

    I have install oracle 8i personnel to the window 98 notebook. The installation successful without any error. But when I used the oracle8i navigator and click on the local database, error "ORA-12637: Can not attach to Oracle 8i" and "ORA-12637 - Packet Receive Failed"
    The same error encountered when I start the database.
    Appreciate if any could help on this matter.
    Thanks in advance.

    Hi
    Check weather entries are there in the registry.
    Go to the services in the control panel and see if the oracle service has started if not start it. If this is up then the registry is OK. if If not u can create it using the oradim utility.
    Then set your oracle_sid = <dbname> in the dos prompt and try connecting again.
    Let us see what happense

  • Error 193: 0xc1 when starting windows service

    Hello,
    I see there is another related question, however I do not understand what 'dependent services' are and cannot check these.
    I am trying to start MySql service and I receive the error 
    Windows could not start the MySql56 service on the local computer.
    Error 193:0xc1
    I should also note that when I start windows, I receive this message:
    There is a file or folder called "c:\Program" which could cause certain applications to not function correctly. Renaming it to "c:\Program1" would solve this problem
    I don't know if these issues are related.
    Thank you.

    Hello Susie,
    Thank you for your reply. 
    Yes, MySql is running as a windows service. C: has been scanned and threats removed.
    This difficulty occurred after trying to reset a forgotten root password after installing MySql for
    the first time.
    I will continue to try other methods of removing the error, but if you or others have other suggestions
    I would appreciate it.
    I thought that a system restore/reinstall might work, but it did not.
    Thank you again,
    Melle

  • Error WSM-02120 when starting Weblogic Server

    Hi All,
    I have problem while starting weblogic server, I found this error:
    WSM-02120 : Unable to
    oracle.wsm.policymanager.
    PolicyManagerException: WSM-02120 : Unable to
      connect to the Oracle WSM Policy Manager due to the following error
      "javax.naming.CommunicationEx
      ception [Root exception is java.net.ConnectException:
      t3://b00wps01:8889,b00wps01:8888: Destination unreachable; nested
      exception is:
              java.net.ConnectException: Connection refused; No available router
      to destination]".
              at
      oracle.wsm.policymanager.BeanFactory.getInitialContext(BeanFactory.java:619)
              at
      oracle.wsm.policymanager.BeanFactory.getJndiObj(BeanFactory.java:648)
    I have followed this instruction (OWSM Error Message: WSM-02120 ... Connection refused; No available router to destination (Doc ID 1569900.1) from oracle support, and unfortunately it didn't work.
    Anyone can help me to solve this issue?

    Hi there,
    Can you check the JDK version and see the compatible with your weblogic installation ?
    You can refer the certification matrix from Oracle to check the compatible version of JDK. Here you go - Oracle Fusion Middleware 12c (12.1.3.0.0) Certification Matrix.
    Most probably, this issue will occur when JDK is not compatible with weblogic installation..
    Lakshman

Maybe you are looking for