Error in LSMW during MM Uploading

Hi Guys,
Material Master upload by using LSMW with Batch Input Recording.
After completion of Last Step at the time of uploading system will not select any view but its showing error like  'Select least one view'
But at the time of recording am selection following view Basic Data1 & 2, Purchasing, MRP 1,2,3 &4 , Work Scheduling, Forecasting, Accounting 1&2, Costing1& 2.
The above said view am maintain X Mark in Field Maping rule as constant.
Kindly give the Soln,
Regards,
S.Babusingh

You might need to redo the recording all over again, BDC has plentty of scenario for screen selection to go wrong, so can't really tell what cause your problem based on your desc.  I have been stop using BDC to uplaod material since 5 years ago, I always use Direct input in LSMW and it works much better. I recomend you try the Direct input method instead of BDC if still getting problem.

Similar Messages

  • PE9: YouTube "Error occur during the uploading"

    I have uploaded over 50 videos to YouTube using PE9 and previous versions, but now - after 4 attempts - I get the same well-worn error message: "Sorry an error occur (sic) during the uploading process. Please try again later".
    I use the Share facility that I always do and I have not installed any new software. Hunting the Forums suggested disabling anti-virus software (in my case AVG) which I have done. It is always in the final stage "Transferring to YouTube". I have shot in XP+ from my Canon Legria HFS10.
    The editing process to reduce to 10 minutes from 20 went without a hitch.
    (Previous efforts can be seen if you're desperate by hunting for Basset Hound Walkers).
    Any ideas most welcome. Should I convert to a different format? - though it has worked before. Are YouTube having problems?
    Many thanks.

    First, glad to hear that you were able to Export then upload. That is a first step, and a big one - the Project is out the door.
    As to the failure of the On-Line upload (nice, when it works), I would pour over your settings for that function. My guess would be that something (probably just one setting), is not right.
    It could be something that YouTube has changed, since you last used the function. They love to do that.
    Going back about a year (maybe longer?), when they went to Google accounts, almost everyone was left out in the cold, until they got their accounts sorted. Similar happened, when YouTube introduced the "extended accounts," but programs, like PrE had been written for the 10 min. Duration (why I asked for clarification on the Duration), so the direct upload function in PrE would not allow for those extended accounts. YouTube always seems to be a "moving target."
    Last, I am greatly honored! Thank you.
    Good luck,
    Hunt

  • Error "A web exception has occurred during file upload" when trying to import ESXi image file into Update Manager

    I'm encountering this error and not sure how to fix, I'm quite new to vCenter so please bear with me.
    I'm trying out vCenter 5.1 with Update Manager 5.1 right now.  No license key has been entered and I still have 50 odd days to try it out.
    2 ESXi hosts are being managed by this vCenter, and they're both running ESXi 4.0
    I'm looking to use Update Manager to try to upgrade the ESXi 4.0 hosts to ESXi 5.1
    I downloaded the image file VMware-VIMSetup-all-5.1.0-799735.iso from VMWare website, and is looking to import it using the Update Manager so I can update the ESXi hosts, but I keep on getting the error:
    File name:     VMware-VIMSetup-all-5.1.0-799735.iso
    Failed to transfer data
    Error was: A web exception has occurred during file upload
    I tried importing it by using vSphere client to connect to vCenter server both remotely and locally, with firewall disabled.
    I've read http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1026602
    I've disabled firewall, and there is no anti-virus program on the server.  I've also restarted the machine several times, to no avail, I didn't reinstall update manager because the whole Windows and VCenter installations are clean from scratch.
    I logged into the vSphere Client using Active Directory credentials, and I've made all Domain Admins (which my account is a member of) part of the administrator group on the vCenter server. I can't log in using admin@System-Domain because it tells me I don't have permissions for it, I still haven't really had the chance to figure out why that is and not sure if that makes a difference.
    Also, I'm fairly certain I'm using the right image file, as I've burned some DVD's used that image file to upgrade some other ESXi hosts.  Unless there's a special image file I need to download?
    I'm at lost on what I can do to make it work.  Please advise.
    Thanks.

    The ISO file you mentioned is the one for vCenter Server. What you need is the "VMware-VMvisor-Installer-5.1.0-799733.x86_64.iso" (or VMware-VMvisor-Installer-201210001-838463.x86_64.iso) for the ESXi host.
    André

  • Problem: An error occured during the uploading process.

    Hello!  I've searched around but I am having difficulty finding a solution to this problem.
    I am trying to upload videos through Adobe Premiere Elements 9 to YouTube, using the preset options in the share tab.  This worked previously without issue, but then one day I continually ran into an error stating "Sorry, an error occured during the uploading process.  Please try again later."  However, it eventually started working.  It is now a few weeks later, and I am having the very same issue.  I am unable to upload to YouTube or any other service through the Share tab.  Even loading the software itself, the opening splash screen is unable to grab my Adobe ID.  It never stops "Gathering User Info..."
    Steps I have tried:
    Going to Edit -> Preferences -> Web Sharing and hitting the refresh button to update settings.
    Checked router settings.
    Enabled DMZ on router and linked it to this specific computer.
    Rebooted PC and router, and tried updating the Web Sharing settings multiple times.
    I honestly do not believe it to be a router issue, especially since it is currently in DMZ mode and I have had absolutely no trouble with any other software.  This has continued to baffle me though, and finding help is difficult.  Searches keep giving me encoding settings for YouTube videos, and few results pertain to this particular issue.
    I am aware I could export the video normally and upload through YouTube that way, but on DSL, my upload speed is pretty terrible for a high quality video.  The YouTube HD setting has been great for me in the past, as files are small but still look great online.  I would really like to get it working again, both for ease and convenience for simple projects.
    If anyone has any ideas as to what could be causing a problem, I would be greatly appreciative of any advice.  In regards to the project itself, there is no real editing being done at this point, as I am trying to eliminate any possibility of error elsewhere. I opened a new project, added a video clip and went directly to upload it, resulting in the error above.
    I don't believe it matters in this situation, but just in case:
    Windows 7
    AMD Phenom II X4 820 - 2.80 GHz
    6 GB RAM
    Radeon HD 5880 1GB
    Connecting through a Netgear WNDR3400 router, standard DSL connection.

    Sorry, not seeing where to edit my original post.
    Just wanted to add, that I am able to visit both the Photoshop.com website, as well as YouTube through my browser.  So I am not being blocked somehow to those particular sites.  It only seems to be through the software that I cannot connect to any of the online services to upload videos to.
    Additionally, the only virus software running is Microsoft Security Essentials.  It has never raised a flag before with this software or caused interference in the past.  I do not use Norton or any other service which are known to interfere with programs often.
    Just a quick example as well, pinging Photoshop.com through the command prompt shows I am getting through just fine.  As you can see in this image though, it cannot seem to ever connect and grab my user information.
    http://i.imgur.com/S53xN.png

  • Error in LSMW in Uploading Inspection Plan in QP01

    Hi All,
    I am facing problem when executing LSMW, I am Uploading Inspection Plan in QP01 transaction using Direct Input methos. The problem is on 13th step :Error that I get is 'No profile with entry tool for task list / / / in session INSPECTION_OBJ', here INSPECTION_OBJ is the name of the session. I have given the constant value of field profile (BIPKO-PROFIDNETZ) in mapping step and also activated check box 'entry tool' under profile to remove this error. But in  that case i can pass only the header data while processing the session and control does not get into Operation and characteristic screen.
    Can anyone pls help me..
    Thanks in advance...

    You might need to redo the recording all over again, BDC has plentty of scenario for screen selection to go wrong, so can't really tell what cause your problem based on your desc.  I have been stop using BDC to uplaod material since 5 years ago, I always use Direct input in LSMW and it works much better. I recomend you try the Direct input method instead of BDC if still getting problem.

  • PO attachment error - Read error during PC upload

    Hi Gurus,
    I am getting the error when I am trying to attach any file in ME22N, by clicking the services for object button, create attachment, and select the attachment.
    The error message is "Read error during PC upload" and "The attachemnt has not been created".
    The system is upgraded to ECC 6 last year and have not tried this function before.
    Thanks in advance.
    Durai

    Hi,
    They are not using any interfaces (EDI), no idocs. They are using either fax or email and post modes only.
    After saving the PO, we can able to attach the documents by clicking the services for object button in ME22N. But I am not able to attach the document to PO.
    Thanks for your response.
    Regards
    Durai.

  • I have previewed my book but after cliking BUY BOOK it compiles it OK but then it always states an error after of during uploading it to the store.  How can I rectify this?

    I have previewed my book but after cliking BUY BOOK it compiles it OK but then it always states an error after of during uploading it to the store.
    How can I rectify this?

    I have previewed my book but after cliking BUY BOOK it compiles it OK but then it always states an error after of during uploading it to the store.
    How can I rectify this?

  • Read Error During PC Upload

    Hi Experts,
    When I attempt to attach a document to a PO (ME21N/ME22N) I get an error message say:
    Read Error During PC Upload : Include File in PC Application
    The funny thing is, some users can make attachments, others cannot. Is this a profile or authorization issue?
    Thanks in advance!
    SW

    Hi Steven,
    You cannot attach a file in ME21N trxn using Services for Object. For this you have to come out of Trxn ME21N after saving Po and again go to ME22N trxn code and in Menu System - Select Services for Object and Attach your File.
    Be sure the File is not in use and closed.
    Reg,
    Ashok

  • Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets.

    Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets. then it names the file as an m4p file. Everything works beautifully on the iPad through Preview, and validates through iTunes Producer up until the attempted upload. If you've been able to accomplish this, please let me know how you prepared your audio files. Many thanks.

    Hello Fellow iBook Authors!
    Today I received the same error that you all have been discussing.  I tried selecting the DRM
    and this did not work for me, though I'm glad it did for some.  Here's what I did as a work-around. . .
    Since iBooks Author did not have a problem with Videos, I simply used one of my video programs, ScreenFlow to turn the audio into a video file m4v.  I added an image and extended the length or timing of the image to span the length of the audio file.  Then exported as an .mov.  I then opened QuickTime and opened the file and exported the file to iTunes. 
    You can use iMovie, Camtasia or any other progam that will allow you to export the audio as a movie file.  Does this make sense?  I hope this helps, at least in the short-term.
    Michael Williams

  • Formatting errors in Browser Preview and crashing during FTP Upload

    Hey Y'all!
    I have two errors that I cannot seem to fix.
    1. The Browser Preview of my site does not match the design in the Design section. There is added blank space between elements when previewing in the browser. There are no elements of this page that are Footer Items and I've tried resetting the spacing in various ways to align everything as it is seen.
    2. I thought that maybe the Browser Preview was the problem, and that my site would be fine once I uploaded it. Unfortunately, Muse stops responding on the same element during multiple upload attempts to my FTP Host (GoDaddy). I've tried reorganizing pages in my Plan environment, deleting all files on GoDaddy and uploading the entire file, uploading only modified files after a crash, and deleting/replacing/and relinking the asset in question. I've deleted two other assets that froze the upload earlier, thinking that they were the problem (scroll effects on Edge Animate files), but now it is freezing on a simple .png file.
    I've had this screen for 15 minutes, now, with a spinning pinwheel. It is my 5th failed attempt in the past week to upload my site.
    Any information about potential fixes would be greatly appreciated. I'm hoping that I'm overlooking something simple.
    All the best,
    Paul

    I'm sorry I can't help but I have a question...how did you find an ftp server? I'm new to iweb and could you use your help.
    Thanks

  • Using Direct input method(LSMW)Can I upload only 3 fields for MM01

    Using Direct input method(LSMW)Can I upload only Matnr,mbrsh,mtart fields for MM01.Otherwise I have to give all the mandatory fields.?

    Hello TJK,
    LSMW will work in the same way as you create normal material master with the transactions, here you are giving the value through flat file and creating material master with program.
    You can create only one view with LSMW but you need to give all mandatory field on that particular view, so if you have only these three field as mandatory then yes it is possible, if you have any more field mandatory addition to these fields then it will not work out, during the last step it will throw error saying "maintain the value for field XXX"
    Hope this helps.
    Regards
    Arif Mansuri

  • 'Activation error..' message when uploading rules for multiple territories

    Hi All,
    When trying to upload rules for multiple territories using Excel, only a few territories get activated and for the rest an error saying 'Activation Error for Function <hexadecimal values>...N: see following message for details' is displayed. It was found that this is due to the territories getting locked.
    The create_rule() and save_rule() methods of CL_CRM_FDT class and FM  CRM_TERRMAN_LINK_BUFFER_UPDATE are used for this functionality.
    Kindly suggest some ways to unlock or any other alternatives.
    Thanks & Regards
    Jagathshree

    Hi Leonie,
    Thanks for your reply.
    Error message below. The preview is fine . I can discount the first 2messages as its a new computer so plenty of disk space and upload doesn't seem to be interrupted. I have uploaded to iphoto before. have tried to upload 3times with the same error message. I had to photo my slides with a Kaiser Baas photo maker , which apparently doesn't scan but takes photos in megapixels of the slides. I am wondering now if the format is incompatible though they are jpg files or the colour type wrong. The image files are  around 1-3 mb each and  72 ppi. I think  I will now scan them properly with a scanner to 300dpi anyway to improve quality.
    Apple  talks about image files not being too big for uploading but gives no sizing of what too big is?
    Error message
    1. Upload Error. Loss of connection or file corruption during order upload may cause an incomplete order. Resubmitting your order usually resolves this issue.
    2. Low Disk Space. If your computer is running on low disk space, your files may be assembled incorrectly. Create more space by deleting unused files.
    3. Unreadable PDF file or image files. Files are sometimes assembled incorrectly due to CMYK or Grayscale color space. Use the RGB color space for best results.

  • Error in LSMW

    Hi
    i am using lsmw to upload my pouting
    I am using batch input methode to upload my header data. and direct input  methode to upload my operation and material assignment data.
    is this the correct way of doing lsmw.
    can we upload header data and the operation data and material assignment data in one step.
    ok
    when i am doing batch inpurt methode for uploading my header data
    its showing me this error message.
    BDC_OPEN_GROUP, lock date .01132009. is invalid
    Message no. 00335
    Diagnosis
    Error creating a batch input session.
    Procedure
    Contact the person in charge.
    what should i do. is there any way to relesase the dates.

    Hi,
    There is a field BI000-START. You just have to Map it with any of the earlier date.I mapped it with 20120101 and it worked. It should be in YYYYMMDD format.
    Regards
    Ankush

  • Error in LSMW : Enter a Valid Value

    Dear All,
    I am Creating a LSMW for MM01 Transaction using Direct Batch Input Method
    I got an error in LSMW while I start uploading saying "Enter a Valid Value" .
    I am selecting 14 Views in a single LSMW.
    Basic Data1 / Data2 , Purchasing , Foreign Trade : Import Data, MRP1,2,3 , General Plant 1/2 , Accounting 1 & 2 , Costing 1 & 2.
    Can anybody tell me why I am getting that error.
    Thanks in Advance.
    Tulasi

    Perform theses steps
    - In LSMW read and convert only one entry from file
    - go to SM35 -> select your session with that one entry
    - select process , option process/foreground
    - choose process
    You will have that batch input run in the foreground, so you can see all the values entered to certain input fields and all the actions which take place in that screens. This way you should see which step excatly creates the error.
    Regards
    Marcin

  • Problem during mass upload

    Hi experts ,
                       In MM17 during mass upload while saving I am getting following error :
    Messages have been issued: number MASS005658000023
    Message no. MK101
    Diagnosis
    During inbound processing for the IDoc, messages have arisen while checking material data.
    System Response
    The system has filed these messages in the form of an application log with the number MASS005658000023.
    Procedure
    View the application log.
    Proceed
    Please help
    Neal

    Hi Sir ,
              Thanks , but this link doesnt give any solution . Can you please explain what is to be done , or am I doing something wrong ?
    I am using this T code for first time , can you give me right procedure ?
    What I am doing is
    MM17 . I entered plant , imported materials from notepad and doing change . For some mats it has done .
    For remaining materials I am selecting corresponding line and mentioning new value and trying to save and its giving error .
    Neal

Maybe you are looking for