Error in LSMW(File Name 'Converted Data': Max. 45 Characters. Remaining dat

hai friends
I am new of the lsmw, i am doing the recording method in lsmw,
i got a one error in specify files step, the error is 'Converted Data' Max.45 Characters. Remaining data' what i do next
thanks&regards
chinnu

Hi Kumar,
This error occurs because LSMW restrict the converted data file (path and filename)
to max of 45 characters.
The naming of this converted file is auto-assigned by LSMW at the first creation.
but you can modify the name and shorten it manually by going to step
Specify Files
-> double click the converted data and shorten the filename until the length
of filepath and name is less than 45.
Have a nice try and good luck

Similar Messages

LSMW -File Name 'Converted Data': Max. 45 Characters. Remaining data saved

Hi to all,
I am facing the error message while specifying the file(7th step) in LSMW as below
<b>File Name 'Converted Data': Max. 45 Characters. Remaining data saved.
Message no. /SAPDMC/LSMW_OBJ_060028</b>
Diagnosis
Some import interfaces only accept file names (including path) that have a maximum of 45 characters.
System Response
All data except the file name of the converted data is saved.
Procedure
Adjust the file name for the converted data.
I am not able proceed further steps in LSMW..
please give your valuable suggation and solutions.
Thanks in advance..
Amar.

HI
Even I am facing this error. I tried from the root directory also. But I am getting the same error. (D:\LSMW\t.txt).
Also, another text file with the path name C:\Documents and Settings\Desktop\testmass.txt was uploaded without any problem.
Can anyone please help in solving this?
Regards

Determining File Name in Info Package under External Data

Determining File Name in Info Package under External Data
I am on SAP BW 3.0. A System is sending a flat file every few days
With a date time stamp, e.g., d:\loaddar\file_20080212_122300.csv
I know in Info Package one can create routine under external data to determine the file name. I have seen
Examples where people determine file name based on date. Since my file has a time stamp, what code I write a to pick the file. Is there a way to read one or more files and
Determine file name.
I am new to SAP BW and ABAP. However, I have lot of experience with Oracle and Java.
Can someone point me how this will be done. I am looking for some sample code as well.
Thanks in advance. I will really appreciate your help.

Hello Prem,
Even i used to get the file suffix with date & time, and i found very difficult to pick up the file from application server using routine in infopackge. Then i asked to change to date only and it was easy to pick the file using routine. But i think in your case files are coming more than once, in such a case you should write a small unix script to add these files and then convert into single file with date only and execute the infopackage to load it.
Cheers!
Sanjiv

I just found an error in the file name for my Camera Raw Cache file. How do I correct it?

I just found an error in the file name for my camera raw cache file. The error is in my username. I don't know how to correct the error or if I should just leave it. I'm not sure where my cache file is stored on my computer. Any help would be appreciated.
Thank you

Since you are on a Mac if when you first set up your account you left out the i in Wilson nothing you do will change that. The REAL account name will always be alicewlson. Once an account is created you can't actually change the name of it. You can change the name that is displayed but not the REAL account name.
Simplest thing to do is stop worrying about it. Everything is as it should be, that is except Wilson being spelled without the i.
Lilac50 wrote:
When I searched finder for "alicewlson" I found a long list of files like this:
2014-07-22 12.50/File005.nef[15:16:35.212] (debug) src/ImageLoader.cpp:363: File: /Users/alicewlson/Recovered/2014-07-22 12.50/File002.nef[15:18:02.173] (debug) src/StoreXMLFile.cpp:21: /Users/alicewlson//.rpro/rpro.cfg
I believe I made the error in my user name when I first got my computer a year ago. I then corrected it under my user name but not in my Lightroom files. I also looked for files with a .lrdata extension and didn't find any.

I cannot open files in excel with error message "The file name or path contains invalid characters

I cannot open files in excel with error message "The file name or path contains invalid characters

Found the solution. The hardrive name was changed to "/" which is not a recognised file path character. So I changed the name to "Mac" then I was able to already open all files in excel and word

Shared photo-stream, makes long file names with 42 random characters

Windows icloud 3.1, in a shared photo-stream, makes file names with 42 random characters long. It didn't do this in iCloud 2. I have installed iCloud 3.1 on a windows 8.0 and 8.1 machine and two Windows 7 machines. They all do the same thing. It used to give me file names like "IMG_0001.jpg" now it gives me random file names like "01a9fc3363330464233a142486180f0c1622eb9fca.jpg" all the pictures are out order.
Does anyone have fix for this? Does any one else have this problem? I have posted this before and know one else that uses windows seams to have this problem exect me. I did call Apple and they did some research and bumped me up to senior techs and eventuality Apple told me this is working the way it was designed to. This is extremely stupid, I need the sequential file names so the pictures will sort correctly.

I have never found a solution for this.
I did find a Work Around. What I do when I receive a folder full of pictures from another ios iPhone user, I copy all the photos as a batch from the PhotoStream folder into a free Windows program called "FastStone Photo Resizer" from www.FastStone.org. This program allows you to resize the photos as a batch to what ever size you wish. In my case I resize them to 2560 x 1440 which fills my 27" monitor and reduces the file size of each picture from 2MB or 3MB down to about 450 KB without degrading the picture as far as what you see on the screen.
This program will also within the same batch operation, allow you to sort the pictures by "Date Taken" which is the Date and Time the picture was taken. It gets this information from the EXIF data in the jpg file. This program will then rename the files with different numbering format options including date, time, alphanumberic and with just simple numbers starting at what ever number you wish to start with. I can get files that look like this again "IMG_0001.jpg" and have all the pictures in the correct order that they were taken. At this point, I save the pictures directly to a folder on my PC. The cool thing about this is, all the EXIF data is preserved as well. I can process a 100 pictures in less that 60 seconds. I hope this helps. For me, I can now live with this iCloud numbering defect.

Word cannot open this document. The document might be in use, the document might not be a valid Word document, or the file name might contain invalid characters (for example,\ /).

I recently upgraded to a new Macbook Air running Lion, from my 2007 white Macbook running Snow Leopard. I had Office for Mac 2004 on the 2007, but had to upgrade to Office for Mac 2011 to be compatible with Lion on the Air. Now when I try to open my documents on the Air that were saved under Office 2004 on the old computer, I get the following message: Word cannot open this document. The document might be in use, the document might not be a valid Word document, or the file name might contain invalid characters (for example,\ /).
Any suggestions? Thank you.

Ha,ha,ha.....I figured it out. But for anyone else who's having this problem, it seems that while Office 2004 allowed dates in this format: 00/00/00, Office 2011 doesn't like it at all. I just changed the format in the document names to 00-00-00 and all is well. Documents are opening beautifully!

LSMW file read & convert file name

Guys
This is pretty hot - any ideas to automate will be helpful.
Is there a way to programmatically change the default name for the LSMW file read and file convert names?
For example if read & conv file is
Plant_Master_Material.lsmw.read & Plant_Master_Material.lsmw.conv,
I want to programmatically append userid and make the file name look like
Plant_Master_Material_myid.lsmw.read & Plant_Master_Material_myid.lsmw.conv.
It can be done manually via step specify file in LSMW, but I want to automate that step.

Hi Iqbal,
Its not possible to make it automatically,
name for the LSMW file read and file convert will as such like this
PROJECT_SUBPROJECT_OBJECT.lsmw.read & lsmw.conv.
This can not be changed...if u need it u can have u r userid under u r object name...
Reward if useful..

Hi, error message: "illegal file name" when exporting a .mov file in final cut 7.

why I got this error message? I used this name before and wish to save it after some editing. System asked me "do I want to replace it?", I answered 'yes', then "illegal file name came up?"
It accepted it the first time, why I got this name the second time ?
Please help. thanks.

Can't say why but it happens; maybe a bug. (If it is we know it will never be fixed.) Anyway, it's not a bad practice to use "save as" – appending the date, or some other code to be able to track versions.
Good luck.

Error while reading file name in a directory

Hi,
I am trying to read all the file names within a directory, however I get the below error while running the code.
Run-time error '5':
Invalid procedure call or argument
The actual path is "Q:\Budget\Historical Budgets\FY15\*.xls*"
and ThisWorkbook.Sheets(1).Range("A1").Value = FY15 in my excel sheet.
"Below is the code I am using"
Dim file As Variant
file = Dir("Q:\Budget\Historical Budgets\" & ThisWorkbook.Sheets(1).Range("A1").Value & "\*.xls*")
If file = "" Then
        MsgBox "no files"
        Exit Sub
      Else
        ' ... else, count the files
        x = 0
        Do While file <> ""
            x = x + 1
            file = Dir
<---- I get the error at this line.
        Loop
End If
Could you please help me to solve this problem
Regards, Hitesh

Do you want to generate a list of all files in a folder, in your spreadsheet? If so, please try this sample code?
Option Explicit
Private cnt As Long
Private arfiles
Private level As Long
Sub Folders()
Dim i As Long
Dim sFolder As String
Dim iStart As Long
Dim iEnd As Long
Dim fOutline As Boolean
arfiles = Array()
cnt = -1
level = 1
sFolder = "C:\Users\Excel\Desktop\Coding\Microsoft Excel\Work Samples\"
ReDim arfiles(2, 0)
If sFolder <> "" Then
SelectFiles sFolder
Application.DisplayAlerts = False
On Error Resume Next
Worksheets("Files").Delete
On Error GoTo 0
Application.DisplayAlerts = True
Worksheets.Add.Name = "Files"
With ActiveSheet
For i = LBound(arfiles, 2) To UBound(arfiles, 2)
If arfiles(0, i) = "" Then
If fOutline Then
Rows(iStart + 1 & ":" & iEnd).Rows.Group
End If
With .Cells(i + 1, arfiles(2, i))
.Value = arfiles(1, i)
.Font.Bold = True
End With
iStart = i + 1
iEnd = iStart
fOutline = False
Else
.Hyperlinks.Add Anchor:=.Cells(i + 1, arfiles(2, i)), _
Address:=arfiles(0, i), _
TextToDisplay:=arfiles(1, i)
iEnd = iEnd + 1
fOutline = True
End If
Next
.Columns("A:Z").ColumnWidth = 5
End With
End If
'just in case there is another set to group
If fOutline Then
Rows(iStart + 1 & ":" & iEnd).Rows.Group
End If
Columns("A:Z").ColumnWidth = 5
ActiveSheet.Outline.ShowLevels RowLevels:=1
ActiveWindow.DisplayGridlines = False
End Sub
Sub SelectFiles(Optional sPath As String)
Static FSO As Object
Dim oSubFolder As Object
Dim oFolder As Object
Dim oFile As Object
Dim oFiles As Object
Dim arPath
If FSO Is Nothing Then
Set FSO = CreateObject("Scripting.FileSystemObject")
End If
If sPath = "" Then
sPath = CurDir
End If
arPath = Split(sPath, "\")
cnt = cnt + 1
ReDim Preserve arfiles(2, cnt)
arfiles(0, cnt) = ""
arfiles(1, cnt) = arPath(level - 1)
arfiles(2, cnt) = level
Set oFolder = FSO.GetFolder(sPath)
Set oFiles = oFolder.Files
For Each oFile In oFiles
cnt = cnt + 1
ReDim Preserve arfiles(2, cnt)
arfiles(0, cnt) = oFolder.Path & "\" & oFile.Name
arfiles(1, cnt) = oFile.Name
arfiles(2, cnt) = level + 1
Next oFile
level = level + 1
For Each oSubFolder In oFolder.Subfolders
SelectFiles oSubFolder.Path
Next
level = level - 1
End Sub
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

Replicat Error Illegal Tandem file name while reading definition file

Hi All,
I have problem while running replicat on the target db2 database i have source db is Oracle database .
**            Running with the following parameters                  **
2012-06-06 16:38:59 INFO    OGG-03035 Operating system character set identified as ISO-8859-1. Locale: en_US, LC_ALL:.
--checkparams
REPLICAT REP01
TARGETDB b88, USERID db2b88, PASSWORD ********
2012-06-06 16:38:59 INFO    OGG-03036 Database character set identified as ISO-8859-1. Locale: en_US.
2012-06-06 16:38:59 INFO    OGG-03037 Session character set identified as ISO-8859-1.
SOURCEDEFS ./dirdef/source_ora4.def
Source Context :
SourceModule            : [er.init]
SourceID                : [/scratch/aime1/adestore/views/aime1_staoi06/oggcore/OpenSys/src/app/er/init.cpp]
SourceFunction          : [get_infile_params]
SourceLine              : [1550]
2012-06-06 16:38:59 ERROR   OGG-00303 Problem at line 27. Illegal Tandem file name: SAPSR3./1CN/CBPSAP001.
2012-06-06 16:38:59 ERROR   OGG-01668 PROCESS ABENDING.I Have Replicat Parameter :
--checkparams
REPLICAT REP01
TARGETDB b88, USERID db2b88, PASSWORD *******
SOURCEDEFS ./dirdef/source_ora4.def
--DDLERROR DEFAULT IGNORE
HANDLECOLLISIONS
--assumetargetdefs
MAP SAPSR3.*, TARGET SAPSR3.*;how to clear this isue..?
thanks, a lot
Riyas
Edited by: riyas on 06-Jun-2012 03:29

Do you mean like this
this is full my replicat params
--checkparams
REPLICAT REP01
TARGETDB b88, USERID db2b88, PASSWORD kagome31
SOURCEDEFS ./dirdef/source_ora4.def
--DDLERROR DEFAULT IGNORE
HANDLECOLLISIONS
--assumetargetdefs
--SOURCEDEFS ./dirdef/source_ora2.def
--SOURCEDEFS ./dirdef/test_db.def
--MAPEXCLUDE SAPSR3.PATCHHIST
MAP SAPSR3.*, TARGET SAPSR3.*;
--MAP DB.*, TARGET db2b88.*;Edited by: riyas on 06-Jun-2012 03:19

HT4221 Synched Photos from PC should be in File Name Order, not by last modified date

Since installing IOS 7 the sorting of my photos from my PC sent to my Iphone have become totally random.
Apple claims the files are by Last Date Modified.
I have a very detailed file naming system on my PC which makes Photo Retrieval by Date, Name, Subject easy.
Is there any software that recognizes the Windows File Name? The sequence file names given during SYNCH are useless.

When you import into iPhoto, each imported set goes into a folder called Last Import.
One way to do what you want without losing your organization:
iPhoto / File / Import to Library. Navigate to the first folder on the pc. and click on Import. The contents of the folder on the PC will all come together.
On the Mac the photos will be in the folder called Last Import.
On the Mac, create a new folder with the name you want. (File Menu / New folder)
Move the photos as a batch (select all) from the Last Import folder to the one you just named.
Do this as many time as you have folders.

Podcasts broken in 9.2 with error "A duplicate file name was specified"

Ever since the 9.2 upgrade my podcasts have not been able to update. The following error message is displayed when I click the icon next to the podcast:
+There was a problem downloading "... podcast name ...". A duplicate file name was specified.+
Digging in the iTunes download directory I see that a directory entry is created for each podcast (with a .tmp suffix). Inside there is a download.mp3 that is zero bytes in size.
I've tried reorganizing the library, restarting, reinstalling, etc.
Not sure if this matters, but I've been mounting my itunes library via nfs for the past five years or so without any issue.
I tried to see what iTunes was up to via dtrace/iosnoop but it appears that they've gone and restricted that at the OS level -- so no luck there. Any luck here?

Close iTunes, delete the download directory, and restart.
tt2

Getting file names of different groups in a data portal

Hi,
I am finding difficult to retreive the file names of the different groups loaded in the data portal. For example, say I have loaded two different files of same ext .tdms in to the data portal which automatically assigns as two groups. My objective is to retreive the file name of the two groups loaded using VBS in diadem 11.1.
Can anyone help me in this regard.
Regards,
X. Ignatius
Solved!
Go to Solution.

Thanks Andreas,
I have got a plugin which loads the multiple lvm files with their sourcefile name. Earlier it would be like Labview Data, Labview data1, Labview data2.... when multiple files are loaded. Now with this plugin attached in the startup script, all the files are loaded with their original file names.
Attached the plugins, place the Custom LVM Load Event. Vbs in the start up script, the other attachment is the function callled by the main script.
Regards,
X. Ignatius
Attachments:
Custom LVM Load.VBS ‏1 KB
Custom LVM Load Event.VBS ‏2 KB

Duplicate File Name error for Unicode file names

I am trying to rip my music collection from CDs to iTunes. I have decided to use my local language (Bangla/Bengali) as Track/Artist names using Unicode. I can edit the CD Info perfectly. The problem started when I try to import the tracks to iTunes as AAC/mp3. The first track is always imported ok but subsequent tracks fails to be imported. iTunes gave an error message saying the file name already exists where as it was not.
Please help.

I reported this to Adobe customer support on 11/29, and here is their response:
Wednesday, December 5, 2007 12:51:27 PM PST
Hello John,
Thank you for contacting Adobe® Web Support for assistance with Adobe
Photoshop Elements® 6.0.
I understand that images are deleted if you accidentally try to move
them to a folder that already includes a file of the same name.
Thank you for bringing this to our attention. I was able to replicate
this behavior as well. The best method to report errors of this nature
is using the following form on our website:
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
I will report this to the product team through my channels. You may want to submit this issue through the web form as it goes directly to the product development team.
I hope this information helps to resolve your issue. If you require
further assistance with this issue, please update your web case with
complete details, including what steps you have applied and any error
messages you are receiving.
You may also call Technical Support at (800) 642-3623. We are available from 6:00 am to 5:00 pm Monday - Friday, Pacific Time.
Kind regards,
Alan C.
Adobe Web Support

Error in LSMW(File Name 'Converted Data': Max. 45 Characters. Remaining dat

Similar Messages

Maybe you are looking for