Error in LSMW for ME11

Hi,
I am getting error while creating LSMW for ME11, No QM info record exists for vendor xxxx.
How will I know for vendor QM info record to be maintained.
Smitha

this problem has actually nothing to do with LSMW, you get the same error without LSMW
In your material master QM view is a control key, and based on the cusotmizing of the control key it requires a Q-info record.

Similar Messages

  • Error in LSMW for MM41 - "No batch input data for screen SAPLMGMW 0100"

    I'm trying to create an LSMW for MM41 to create new Retail articles en Mass. This will be used to only create the Basic view as other LSMW's already exist to maintain the other views. I've created the Recording and setup the LSMW already. My data is read correctly from the source file. When I execute the batch session it fails with the following error - "No batch input data for screen SAPLMGMW 0100".
    I assume the fields in MM41 screen are not setup for batch processing. Could someone with more knowledge or experience in SAP Retail please confirm my assumption and explain where this is setup or provide an alternative to creating new articles en Mass via MM41? The direct input method is more suited for MM01 and not MM41.
    Regards
    Fawaaz

    Hi Guys,
    Thanks so much for all the prompt responses. My issue is now resolved.
    The issue, I'm sure, was my default settings in the MM41 screen which the recording probably took into account or the batch program didn't like. I deleted my recording and created a new one but before I started the recording, I went into the MM41 screen and removed all default values AND view selections. I made my Basic view selection constant in my recording and also in my field mapping. My LSMW for MM41 is now working perfectly.
    Just to answer some of the questions above, my LSMW was Reading and Converting the data in my source file fine. When I display the Read and Converted data, it shows the data fields in the correct place.
    Thanks again.
    Regards
    Fawaaz

  • Error in lsmw for t-code QP01

    Hi Experts,
    Iam uploading data through LSMW for QP01 but in the second last step that is create batch input session its giving me this error "No profile with entry tool for task list / / / in session QP01" can anyone help to get rid of this error. pls reply ASAP.
    Thanks in advance.
    Abhishek Pandey.

    Hi,
       Check below link, it may be useful.
    Re: QM_LSMW BY RECORDING METHOD FOR QP01
    Thanks,
    Asit Purbey.

  • Error in LSMW for MD61

    Hi gurus
    when i run LSMW for MD61 i get the below error ,
    6P 007 "Argument does not exist in Table". what could be the reason\
    Regards,
    Prasanna

    Dear Prasanna,
    Can you please click on the error which you get in the bottom of the screen &
    post that here?That will be helping to findout the exact problem.
    or else Better use the test script for using that properly ,also fill the
    required fields in the template.
    Regards
    Mangal

  • IDoc Error in LSMW for MB1C - Special stock type is E

    When we use MB1C for GR to enter initial entry of stock balance into unrestricted stock for special stock type is E.
    The document is Posted.
    But, when we use LSMW for the above Transaction, the document is not posted.
    In the Inbound processing of IDOC  has the status "Application document not posted".
    In the IDoc Status record gives
       current status : 51 ("SD Document XXXXXXXXX is not in the database or has been archived"
    Pl explain how this problem can be addressed.

    Hi,
    It seems that the stock indicator in E demands for a sales order in the MB1C transaction. The sales order provided by you in the flat file is getting validated by SAP and that sales order is not available in the system or might have been archived.
    It is better to provide a live Sales order to book the stock to that particular sales order. If in case if the Sales order mentioned by you is closed or not required, in such as case the material can be stored under unrestricted stock and not under the sales order stock
    Thanks and Regards,
    Dilli Babu R

  • Error in LSMW for new matl-You have not fully maintained the descriptions

    Hi Experts,
    I am creating a LSMW to create a new material master, but at the end part get the error "You have not fully maintained the descriptions" Message no. MG171. I am using the Standard batch/direct input" and Program Name         RMDATIND.
    Can you please help me.
    Thanks and Regards,
    Amol Kale

    Amol,
    as description is mandatory field while creating material, you need to assign description text.
    also check are you maintaining multiple langauges during this material xreation , if yes, you need to give discription for all langauges.
    hope it will help you.
    Thanks
    Ritesh

  • Error in LSMW for T code TS01 in program RFBISA00

    Hi,
    I am creating GL Account using LSMW  with below specifications:
    Object               0010   GL A/C Master Record
    Method               0001   Hier. structure
    Program Name         RFBISA00
    Program Type         B   Batch Input
    When i am executing the batch input session, i am getting below error:
    First record in file GL_GL_GL.lsmw.conv is not a session record (type 0)
    Please let me know the solution..
    Thanks
    Piyush

    Hi Naimesh,
    I check your blog, its really good.
    Kindly can you please help me for method 0002  Flat structure ).
    I am using below fields and assigning to BSKX structure.
    SAKNR                          C(010)    G/L Account
    BUKRS                          C(004)    Company Code
    KTOKS                          C(004)    Account Group
    XPLACCT                        C(001)    P&L statement acct
    GVTYP                          C(002)    P&L Statement Acct Type
    XBILK                          C(001)    Balance Sheet Account
    TXT20_SKAT                     C(020)    Short Text
    TXT50_SKAT                     C(050)    G/L Acct Long Text
    XOPVW                          C(001)    Open Item Management
    XKRES                          C(001)    Line item display
    DZUAWA                         C(003)    Sort key
    FSTAG                          C(004)    Field status group
    But i am getting the error. Can you please tell me the solution.
    hanks

  • Error in LSMW for ME51N

    Hello,
    I'm working with the BAPI option of the LSMW using BUS2105 method CREATEFROMDATA1 as is said in  When I'm processing the IDoc the following error is showed:
    "Please enter items first"
    When I upload the files the asignation of the fields is correct. Does anyone have an idea of how can I solve the problem?.
    Thanks,
    Héctor Fernando Restrepo

    Hi,
    i suggest first try to create a PR manually via ME51N.
    Check if any field is mandatory and compare if you are passing the same in your LSMW.
    Incase not pass the same.
    Regards,
    Ankur Parab

  • Error in LSMW for routing,.

    i am getting ths error whiled assigning materials to operations, for Routing PP.
    You cannot edit the task list object with activity type.
    i am using direct input  to upload routing material assignment to operation and this is my structure.
    my source structure
    GRP
    GRPCT
    OPERAT
    ALTNATIVEBOM
    HEAMEA
    PLANT
    MATER

    Hi,
    Check in log details why it is not updated and also you can run session foreground errors only.
    Regards
    Md.MahaboobKhan

  • Error in the LSMW for vendor master using standard batch/direct input

    I am facing the problem in the LSMW for the Vendor master data. The vendor is initially created for the company code 350 by using LSMW. NOw when I try to uploasd the same vendor using the same LSMW for the company code 450 then I get the error in the Bach input creation as follows:
    Batch Input Interface for Vendors
    FB012                    Session 1 : Special character for 'empty field' is /
    FB007                    Session 1 session name VNDR_CREATE_ was opened
    FB104                    Trans. 2 XK01 : Acct already exists; general area not being processed
    FB125                    ... Data in table BLFA1 cannot be processed
    FB016                    ... Last header record ...
    FB014                    ... BLF00-STYPE 1
    FB014                    ... BLF00-TCODE XK01
    FB014                    ... BLF00-LIFNR 300951
    FB014                    ... BLF00-BUKRS 402
    FB014                    ... BLF00-EKORG /
    FB014                    ... BLF00-KTOKK VEND
    FB017                    ... Last data record ...
    FB014                    ... BLFA1-STYPE 2
    FB014                    ... BLFA1-TBNAM BLFA1
    FB014                    ... BLFA1-ANRED /
    FB014                    ... BLFA1-NAME1 SAVOIE AUTOMATISME DEXIS
    This is because when we use XK01 to create the vendor by using the

    Please check this answered link:
    Re: LSMW for Vendor Master
    LSMW Upload vendor master data
    Edited by: Afshad Irani on May 5, 2010 12:42 PM

  • Error in LSMW while specifying file for Material Cassification and Info Rec

    Hi Friends,
    I'm getting an error in LSMW while specifying file for Material Cassification and Info Record using batch input method.
    The error message i'm getting is:
    "Length of physical file name 'R2R_33_PURCH_INFR_1_PIR_CREATE.lsmw.conv' cannot be longer than 30 characters
    Message no. /SAPDMC/LSMW_OBJ_060049"
    I tried changing the file name but that is not working out. Please help.
    Thanks,
    Amit

    Hi,
    Just try this,
    Go to LSMW, Specify file option, use display/change (Ctrl+F1)
    Select the converted data and double click, change the file name there,
    You will be getting it as "'R2R_33_PURCH_INFR_1_PIR_CREATE"
    Just trim this to "'R2R_33_PUR_INF_1_PIR_CRE"  and try...
    Regards
    Merwyn

  • Error in doing LSMW for uploading in Sale order

    Dear Sir,
    While doing test run for LSMW for uploading 15 Sale order , first order saved with no error and from second order the following error is displayed.
    Exchange rate of 1 in INR 2  for date 25.05.2009 3 could not be determined.
    Kindly do the needfull.

    Sir,
    If we manually enter, order getting saved for all the sale order.
    Why it is not possible while doing LSMW. 
    Please clarify.
    Regards
    Sethuraman

  • Error While Doing LSMW For CL20N.

    Hi Experts,
    Am creating a LSMW For CL20N. While doing tht through the Batch Input Method its throwing a Runtime error message DYNPRO-NOT-FOUND.
    If any one know this please  help me to sort out this problem..
    With Cheers,
    Sumodh.P

    Hello,
    Check recording you have done for CL20N transaction. Look out for screen call sequence.
    Looks like the screen call sequence is different while recording & at time you uploading your data.
    You can check it while uploading data with run BDC MODE 'A'. displays ALL screen.
    In this way you can see where error is coming up with your upload data.
    Try to do re-recording of the same transaction with your upload data.
    Some-time depending upon your upload data screen sequence gets changed, this may cause the BDC while upload to fail.
    Make sure your BDC recording with test data & upload data are matching in business data sense.
    Regards,
    sameer

  • LSMW FOR BOM CREATING.

    Hi Guys,
    I have a requirement where i create lsmw for bom upload using batch input. I m trying to create only one source structure and source fields assigned to this source structure but when finally im executing it its creating the first line item correctly but for all the second line items onwards its saying that Alternative already exists... My functional guy says that its creating just the first component in the bom and for the second component its trying to create another bom...and while its checking for the header which is already created its giving us error..
    I dont know how to handle this.....guys its a little urgent....plz help me out.
    here is a snap shot of the errors..
    10:25:44     Session BOM-CREATE is being processed by user KALVALV in mode N on server psdux07                              0                                                           0     S     00     300
    10:25:44     Creating BOM for material 10000240     CS01     1     SAPLCSDI     0140     7     S     29     030
    10:25:45     Transaction was processed successfully     CS01     1                                                           0     S     00     355
    10:25:45     Alternative 1 already exists     CS01     2     SAPLCSDI     0100     1     E     29     003
    10:25:45     Transaction error     CS01     2                                                           0     S     00     357
    10:25:45     Creating BOM for material 10000346     CS01     3     SAPLCSDI     0140     7     S     29     030
    10:25:45     Transaction was processed successfully     CS01     3                                                           0     S     00     355
    10:25:45     Alternative 1 already exists     CS01     4     SAPLCSDI     0100     1     E     29     003
    10:25:45     Transaction error     CS01     4                                                           0     S     00     357
    10:25:45     Creating BOM for material 10000347     CS01     5     SAPLCSDI     0140     7     S     29     030
    10:25:46     Transaction was processed successfully     CS01     5                                                           0     S     00     355
    10:25:46     Alternative 1 already exists     CS01     6     SAPLCSDI     0100     1     E     29     003
    10:25:46     Transaction error     CS01     6                                                           0     S     00     357
    10:25:46     Creating BOM for material 10000785     CS01     7     SAPLCSDI     0140     7     S     29     030
    10:25:46     Transaction was processed successfully     CS01     7                                                           0     S     00     355
    10:25:46     Alternative 1 already exists     CS01     8     SAPLCSDI     0100     1     E     29     003
    10:25:46     Transaction error     CS01     8                                                           0     S     00     357
    10:25:46     Creating BOM for material 10001252     CS01     9     SAPLCSDI     0140     7     S     29     030
    10:25:46     Transaction was processed successfully     CS01     9                                                           0     S     00     355

    Hi,
    You need to define the two structure header and detail. Both files should have the key fields:
    For example: Both file have Plant, Material Number, BOM Usage & Valid From.
    Then BGR00 and BICSK should be mapped to BOM_HEADER and BICSP to BOM_DETAIL structure.
    Then just do the mapping and should work.
    Hope this helps.
    Regards,
    Bharati Singh

  • When we have LSMW for migrating data then why we will go for Session/Call ?

    Hi Guru's,
    Could you please tell me ...
    When we have LSMW for migrating data , why will go for Sessions/call Transaction for migrating? when we do with LSMW we can complete the object with less time then why we have will do with session/call transaction?
    when we have to use LSMW ? and when we have to use SESSION/ CALL TRANSACTION ..
    thanks in advance..
    vardhan

    LSMW can't upload large amount of data into the database.
    Whereas BDC SESSION CALL /TRANSACTION method can upload large amount of data into the database.
    The error capture method is superior in BDC.
    BDC programs can be scheduled to run on periodic basis as per the customer requirements.

Maybe you are looking for

  • How to clean the Notification iView items

    Hi, I´m trying to cleen the notification iView Items and there is a clear link but I click on it and it is not working, is thera a way for doing this? Thanx in Advanced! Kind Regsrds, Gerardo J

  • CHANGING FONTS(SIZE/NAME) IN CHARACTAR MODE REPORT(URGENT)

    I have problem with Character Mode Report. Can I change Font Name, Size and other charcterstics of a character mode report? If Yes, How? How to change the settings of Character Mode Report (like orientation etc) Namrata

  • Calling a WSSE Enabled Web Service Through a Java Proxy Class

    I am trying to create a client that can access a WSSE enabled web service through the generated java proxy. For now all I am asking for in the .wsse file is the username and password with the line <token tokenType="username"/>. In the client I am set

  • Multiple Frames  - JInternalFrame

    Goal: I need to create a main window. This window contains multiple different views. ( I should be able to switch back and forth among these views). Each view contains 4 small frames/window. My design thought: Step 1. Main window = JFrame. Step 2.Usi

  • Authorization on Summarization Report

    Hi Guys I need to know, how I can achieve Plant authorization on Project summarization reports. I can explain the scenario: We have Project manager A. who is having authorization of for PLANT 1 So he should not allow seeing summarization report for a