Error in LSMW for routing,.

i am getting ths error whiled assigning materials to operations, for Routing PP.
You cannot edit the task list object with activity type.
i am using direct input to upload routing material assignment to operation and this is my structure.
my source structure
GRP
GRPCT
OPERAT
ALTNATIVEBOM
HEAMEA
PLANT
MATER

Hi,
Check in log details why it is not updated and also you can run session foreground errors only.
Regards
Md.MahaboobKhan

Similar Messages

LSMW for routing with standard batch input

Hello All,
I am trying to prepare one LSMW for routing upload for PP module. Routing data contains header data, operation data and master inspection characteristics data.
I have created three source structures viz. material- task list header, task header data, operation and inspection.
Header has been assigned to target structure BIMPL- Batch Input Structure for Allocation of Mat. to Task Lists,
Task header data source structure has been assigned to BIPKO- Batch Input Structure for Task List Header,
Operation source structure has been assigned to target structure BIPPO- Batch input structure for task list operation,
and inspection source structure has been assigned to BIPMK- Inspection characteristics for batch input of task lists.
Every source structure has been identified with an identifier value of which have been set as H, I,J,K for all source structures resp.
The excel file has been prepared as follows,
H     MATNR     WERKS     PLNNR     PLNAL
H     100045     1000     50000043     1
H     100045     1000     50000043     2
I     MATNR     WERKS     PLNNR     PLNAL     VALID_FROM     USAGE     STATUS
I     100045     1000     50000043     1     01012000     1                1
I     100045    1000     50000043     2     01012000     1                 1
I have mentioned here the combination of first two structures only. But it contains data of other two source structures as well (for identifier J & K).
The data from the excel is copied to the flat file and same is specified in LSMW in the step 'Specify file'.
In 'Assign file' step the flat file is assigned to all the four source structure.
Now at the time of reading data system is throwing me an error as 'Ensure field sequence is correct for data for mutiple source structures' Message no. /SAPDMC/LSMW_OBJ_060026
How to overcome this?
<removed by moderator> answers will be greatly appreciated........
Mimiri
Edited by: Thomas Zloch on Jul 11, 2011 10:16 AM

Hello ,
have you maintained this check box for the key fields"
LSMW>Maintain Source fields>double click on fieds : MATNR WERKS PLNNR PLNAL
Selection Parameter for "Import/Convert Data"-->Tick this check box
regards

Lsmw for routing

I am trying to upload routing using LSMW.
which is the best way to use batch input or direct input. I dont have a choice fof using badis or BDC
can we upload routing without writing any code in LSMW.
so i created three files
header
operation
component allocation.
what should be the link between these three files.I did lsmw for BOM. there i ve used material number as link. bou i didnt find material number in routing lsmw. so what should be the reference.
can we take group counter number as reference.
can some one provide me the source file structures for this LSMW for routing.
thanks.

Hi,
You can use the standard LSMW for routing. As you mentioned first you upload the header and take the group no. as reference and upload the operation. and the components will be automatically assigned to the routing with the first operation.
Thanks and Regards,
Satish

Creating an LSMW for routing

Hi
I have managed to create a LSMW model, that wil create (CA01) a routing.
My problem is that components (from the BOM) is not assigned to operations.
When I display converted data, just before I create a batch input session, I can can see selected components is assigned to an operation.
When I use transaction CA03 afterwards, behind the TAB " CompAlloc" there is no materials that has been assigned to operations.
Has anyone any experience on this issue?

Dear,
As said by Bala,get the help from ABAP programmer and go for a BDC for
creation of routing.
I have not worked or used LSMW for routing,so could not give a reply for your
question.
Regards
Mangal

LSMW for Routing and Reference Operations

Hello Experts,
I am working on data transfer for Routing and Reference Operations (TCode CA01 and CA11).
I found one LSMW for Routing provided by SAP but didnt found for Reference Operations. Does anyone has more stuff related to Data transfer for Routing and Reference Operation.
Please share with me. My email id is [email protected]
Thanks in Advance..
Harkamal

Hi Harkamal,
Check the programs:
RCPTRA01
RCPTRA02
Go to SE38 .
GIve the name of the program.
Choose the Documentation radio-button.
Click Display.
It is pretty well documented.
Regards,
Ravi Kanth Talagana

Problem in LSMW for Routing. Urgent

Hello all,
I am doing LSMW for Routing. The object attributes are
Object 0170 Routing
Method 0001 Batch inpu
Program name RCPTRA01
Program type B Batch input
The material number MATNR and the plant WERKS is not getting filled up in the initial screen (CA01 tcode). The fields are RC27M-MATNR and RC27M-WERKS. But all other fields are getting filled up.
I have given the structure relation to BI001, BIMPL, BIPKO, BIPFL, BIPPO.
When I checked the program RCPTRA01, I could able to find out the below code which actually passes space to the above fields.
Material
BDC_TAB-FNAM = 'RC27M-MATNR'.
BDC_TAB-FVAL = SPACE.
APPEND BDC_TAB.
CLEAR BDC_TAB.
Werk
BDC_TAB-FNAM = 'RC27M-WERKS'.
BDC_TAB-FVAL = SPACE.
APPEND BDC_TAB.
CLEAR BDC_TAB.
How to go about this.
Awaiting your reply,
Thanks in advance,
Balaji

Hi,
Im trying to load long text for Operations using the program RCPTRA01 however the screen sequence dosn't even enter the long text area, is there is anything specific that i would have to do to make sure the long text gets in

Error in LSMW for MM41 - "No batch input data for screen SAPLMGMW 0100"

I'm trying to create an LSMW for MM41 to create new Retail articles en Mass. This will be used to only create the Basic view as other LSMW's already exist to maintain the other views. I've created the Recording and setup the LSMW already. My data is read correctly from the source file. When I execute the batch session it fails with the following error - "No batch input data for screen SAPLMGMW 0100".
I assume the fields in MM41 screen are not setup for batch processing. Could someone with more knowledge or experience in SAP Retail please confirm my assumption and explain where this is setup or provide an alternative to creating new articles en Mass via MM41? The direct input method is more suited for MM01 and not MM41.
Regards
Fawaaz

Hi Guys,
Thanks so much for all the prompt responses. My issue is now resolved.
The issue, I'm sure, was my default settings in the MM41 screen which the recording probably took into account or the batch program didn't like. I deleted my recording and created a new one but before I started the recording, I went into the MM41 screen and removed all default values AND view selections. I made my Basic view selection constant in my recording and also in my field mapping. My LSMW for MM41 is now working perfectly.
Just to answer some of the questions above, my LSMW was Reading and Converting the data in my source file fine. When I display the Read and Converted data, it shows the data fields in the correct place.
Thanks again.
Regards
Fawaaz

Error in LSMW for ME11

Hi,
I am getting error while creating LSMW for ME11, No QM info record exists for vendor xxxx.
How will I know for vendor QM info record to be maintained.
Smitha

this problem has actually nothing to do with LSMW, you get the same error without LSMW
In your material master QM view is a control key, and based on the cusotmizing of the control key it requires a Q-info record.

Error in lsmw for t-code QP01

Hi Experts,
Iam uploading data through LSMW for QP01 but in the second last step that is create batch input session its giving me this error "No profile with entry tool for task list / / / in session QP01" can anyone help to get rid of this error. pls reply ASAP.
Thanks in advance.
Abhishek Pandey.

Hi,
Check below link, it may be useful.
Re: QM_LSMW BY RECORDING METHOD FOR QP01
Thanks,
Asit Purbey.

Error in LSMW for MD61

Hi gurus
when i run LSMW for MD61 i get the below error ,
6P 007 "Argument does not exist in Table". what could be the reason\
Regards,
Prasanna

Dear Prasanna,
Can you please click on the error which you get in the bottom of the screen &
post that here?That will be helping to findout the exact problem.
or else Better use the test script for using that properly ,also fill the
required fields in the template.
Regards
Mangal

IDoc Error in LSMW for MB1C - Special stock type is E

When we use MB1C for GR to enter initial entry of stock balance into unrestricted stock for special stock type is E.
The document is Posted.
But, when we use LSMW for the above Transaction, the document is not posted.
In the Inbound processing of IDOC has the status "Application document not posted".
In the IDoc Status record gives
current status : 51 ("SD Document XXXXXXXXX is not in the database or has been archived"
Pl explain how this problem can be addressed.

Hi,
It seems that the stock indicator in E demands for a sales order in the MB1C transaction. The sales order provided by you in the flat file is getting validated by SAP and that sales order is not available in the system or might have been archived.
It is better to provide a live Sales order to book the stock to that particular sales order. If in case if the Sales order mentioned by you is closed or not required, in such as case the material can be stored under unrestricted stock and not under the sales order stock
Thanks and Regards,
Dilli Babu R

Error in LSMW for new matl-You have not fully maintained the descriptions

Hi Experts,
I am creating a LSMW to create a new material master, but at the end part get the error "You have not fully maintained the descriptions" Message no. MG171. I am using the Standard batch/direct input" and Program Name RMDATIND.
Can you please help me.
Thanks and Regards,
Amol Kale

Amol,
as description is mandatory field while creating material, you need to assign description text.
also check are you maintaining multiple langauges during this material xreation , if yes, you need to give discription for all langauges.
hope it will help you.
Thanks
Ritesh

Error in Costing for Routing not maintained

Dear Experts
We are working on ECC6.0, creating Material Cost Estimates with Quantity Structure.
The issue is we want the system to give error when Routing is not maintained for the Inhouse Materials.
I've seen system only issues msg CK 461 as a warning message when executing CK11.
This message moreover doesnt exist in Costing Error management.
I'd tried adding this message in OBMSG ans then maintaing it as error in OBA5 but still it is displayed as warning.
I've searched threads but didnt get any relevant results.
Please suggest a way out.
Regards
Kapil

Dear Christian
Message CK 229 works but only if the routing is not maintained.
But if the routing is maintained but without operation, then system issues message CK 461 which seems is not configurable.
Can you suggest if an error can be given for such a case.
Regards
Kapil

Error in LSMW for T code TS01 in program RFBISA00

Hi,
I am creating GL Account using LSMW with below specifications:
Object               0010   GL A/C Master Record
Method               0001   Hier. structure
Program Name         RFBISA00
Program Type         B   Batch Input
When i am executing the batch input session, i am getting below error:
First record in file GL_GL_GL.lsmw.conv is not a session record (type 0)
Please let me know the solution..
Thanks
Piyush

Hi Naimesh,
I check your blog, its really good.
Kindly can you please help me for method 0002 Flat structure ).
I am using below fields and assigning to BSKX structure.
SAKNR                          C(010)    G/L Account
BUKRS                          C(004)    Company Code
KTOKS                          C(004)    Account Group
XPLACCT                        C(001)    P&L statement acct
GVTYP                          C(002)    P&L Statement Acct Type
XBILK                          C(001)    Balance Sheet Account
TXT20_SKAT                     C(020)    Short Text
TXT50_SKAT                     C(050)    G/L Acct Long Text
XOPVW                          C(001)    Open Item Management
XKRES                          C(001)    Line item display
DZUAWA                         C(003)    Sort key
FSTAG                          C(004)    Field status group
But i am getting the error. Can you please tell me the solution.
hanks

Error in LSMW for ME51N

Hello,
I'm working with the BAPI option of the LSMW using BUS2105 method CREATEFROMDATA1 as is said in When I'm processing the IDoc the following error is showed:
"Please enter items first"
When I upload the files the asignation of the fields is correct. Does anyone have an idea of how can I solve the problem?.
Thanks,
Héctor Fernando Restrepo

Hi,
i suggest first try to create a PR manually via ME51N.
Check if any field is mandatory and compare if you are passing the same in your LSMW.
Incase not pass the same.
Regards,
Ankur Parab

Error in LSMW for routing,.

Similar Messages

Maybe you are looking for