Error in LSMW IDOC

Hi,
I am trying to develop and LSMW using IDOC Method.
But when I perform Start Idoc Generation step , I am getting the following error message :-
No partner exists with the name", type".
Please could anyone of you help me with this .
Regards,
Sushanth H.S.

Hi Sushanth
To use IDOC method.
You should create Partner profile.
Pls create the same using WE20 transaction.
After creating the same, you need to assign them in LSMW
You can assign the same using  LSMW->SETTINGS->IDOC INBOUND PROCESSING
Pls let me know, if you need further help on the same
Regards
Madhan Doraikannan

Similar Messages

  • Error with LSMW IDOC method while maintaining Quota arrangement

    Hi
    I am trying to create LSMW using IDOC method for maintaining quota Arrangment.
    I used the standard Message type LPIEQU. Idoc is getting generated and when i tried to process this IDOC i am getting error "Function module not allowed: BAPI_IDOC_INPUT1".
    I used the process code as "BAPI" in message type LPIEQU configuration in WE20.
    If anyone faced this issue please let me know the reason for the error.
    sakthi.K

    see OSS Note 198252 - Special features of POI message category LOI*
    The message categories named are part of the POI (Production Optimization interface) interface.This interface and the message categories contained in it were developed for the transfer to non-R/3 systems.Therefore, an inbound processing in the R/3 system is not planned.

  • How To Track the Errors For LSMW Idoc

    Hello Expert
    While working on Material Master Idoc getting an error message
    Error 51 Application not posted
    Details: IDoc included in IDoc packet containing an error: transfer it separately
    How do i tackle this
    Thanks

    Hi,
        I hope idoc is failing because of problem with the application data. Its not because of RFC. You told that you were getting 51, it means inbound idoc...if its problem with RFC, before creation of idoc itself it should be there...but now idoc created successfully and tried to post / create application document. there it was failing.
        Can you give details some thing like, which inbound FM you are using to post the idoc & idoc type.
    Regards,
    DJ
    reward, if its useful

  • Unicode error in LSMW IDOC method

    Hi Experts,
    Iam using IDOC method to create material master. I am uploading the material master views seperately. When I convert the file and process it in LSMW, system gives me the message, the converted file can not be processed. The reason system display for the same is the idoc table passes the value EDI_DC40U instead of EDI_DC40.
    But this is happening only for a single file and this is not a uni code file. I checked the port also. No where its flagged as uni code system.
    Please help me
    Regards
    Prathib

    Hi Sushanth
    To use IDOC method.
    You should create Partner profile.
    Pls create the same using WE20 transaction.
    After creating the same, you need to assign them in LSMW
    You can assign the same using  LSMW->SETTINGS->IDOC INBOUND PROCESSING
    Pls let me know, if you need further help on the same
    Regards
    Madhan Doraikannan

  • LSMW IDOC generation error

    Hi All,
    While trying to generate IDOC in LSMW, we are getting the below error. Please suggest any inputs and how to proceed.
    No service for system LSMW, client 009 in Integration Directory
    Message no. IDOC_ADAPTER601
    Diagnosis
    Unable to determine the service for system &1, client &2.
    System Response
    You tried to determine a service for system &1, client &2.
    The system ID is taken from the sender port of the IDoc control record,
    which must have the form 'SAP' + system ID. In the case of external
    systems, in the sender port field you must enter the logical system that
    is assigned to the service in the Integration Directory.
    Procedure
    Maintain a service in the Integration Directory for system &1, client &2.
    Procedure for System Administration
    Contact your system administrator.
    Regards,
    Sandeep.

    Hi,
    Thanks for the reply. But we are not using XI here.
    The LSMW - IDOCs are required to be generating for removing production related purchase orders in our support system
    which is just copied from production recently.
    Please advice.
    Rg,
    Sandeep.

  • LSMW Idoc error in start idoc processcing as No data could be selected

    Hi Abapers
    am uploading the data Using the LSMW-IDOC Method.
    it is executing successfully Up to the 13th Step I.e start idoc generation.
    when i execute the 14th Step Start Idoc Processing.
    am getting the Popup information Error like...
    Error: No data could be slelected .
    Can any one help me on this issue
    Edited by: saeed.abap on May 30, 2011 10:12 AM
    Edited by: saeed.abap on May 30, 2011 10:56 AM
    Edited by: saeed.abap on May 30, 2011 10:57 AM

    Hi Abapers,
    Im working on datamigration for Business partner using Lsmw idoc method and getting Idoc status 53 with message crmxif_partner_save function module generated successfully with BP number but some of the entries of the fields is not getting inserted into master table BUT000,can any one put a tip of light what exactly is going wrong as i have taken all necesscary steps if any one can share their views like how to trace the posting program for inbound idoc crmxif_partner_save_m02 and where exactly the data is getting inserted into database table BUT000.
    Will appreciate all your help.

  • Document type not defined in lsmw idoc method

    hello  iam posting Open AR Line Items for contract account using message type
    CTRACDOCUMENT_CREATE  using lsmw idoc method .iam getting error as Document type not defined but actually when iam creating document manually item is created with out any error that means it is defined and my functional consultant is also saying he defined document type.can some body explain me what is the  problem.
    Regards
    priya

    Check OMW9, here document type is defined for the transaction MIRO..
    Go to OMW9, click in the Document Type.
    Then double click on MIRO.
    Also check the sap notes which is referred in the similar thread Document type not defined f5814

  • Application logs for log handling in lsmw idoc method

    Hi Abapers,
          Im using LSMW IDOC method for data transfer from legacy to sap system.Now the requirement is to handle application logs for log handling i.e i have to make use of custom report to handle logs,can any one tell me what all steps to be done for this or if any one can share a link related to application logs would be greatly appreciated.
    Thanks.
    Edited by: saeed.abap on Dec 27, 2011 5:13 PM

    Hi Saeed,
    Please check with this fms
    1) BAL_DSP_LOG_DISPLA
    2) APPL_LOG_READ_DB
    3) IDOC_GET_MESSAGE_ATTRIBUTE
    There is a wiki [Error Log Lsmw|http://wiki.sdn.sap.com/wiki/display/Snippets/ErrorLogProgramforBAPIandIDocMethodin+LSMW] available.
    Regards,
    Madhu.
    Edited by: madhurao123 on Dec 28, 2011 8:25 AM

  • Re:Uploading of material master data using lsmw-idoc method

    Hi friends,
                While processing each idoc  one log on window is opening,and status of idoc is 51,eventhough i am passing material description to maktx of e1maktm,it is showing an 'No description is passed'.
    Colud you please tell me how to correct these errors,i am new to this lsmw-idoc method.
    Thanks in advance,
    Anusha.

    Thank you for reply.
    Actually I am uploading the data in flat file from file port to sap.
    In idoc inbound processing of lsmw i have created a file port and iam giving the logical system name of the same client.
    is this the correct procedure.
    Every time when i process each idoc one new logon window is opening and it is showing idoc status as 51.
    could you please tell me how to correct this one.

  • Problem LSMW + IDOC method for message type : MATMAS

    hi friends,
      I am using LSMW + IDOC method Message : MATMAS , idoc type : MATMAS03 .Setting every thing are fine. Finally Material is not created with error "message have been issued number : <idoc number>".
    data : material, industry type, material type, description, Basic unit of mesure.
    Please  help me.
    Balaji.T.

    Hi,
    I have nothing found regarding your issue. But maybe a look at SAP note 638058 will give you a hint.
    Regards,
    Klaus

  • Problem in LSMW IDOC - Test Scenario Loading Infotype0139

    Hi Experts,
    I am Currently working on LSMW IDOC method,The scenario is  InfoType 0139 - Loading applicant details
    (loading a flat file csv format from my desktop)
    In Step 1 : While saving after entering the details of Message type and Basic Type, getting a message
    "Maintain the default values for IDoc Inbound processing"
    In Step 5: In Field Mapping , Apart from the Segemnt Type YEMPL_SEG, which i created,
    there is one more structure EDI_DC40(this is not created by me).
    Subsequently IDOC is not getting processed. Error Message shows - No partner exists with the name '', type ''
    I had gone through saptechnical document.
    Scenario:
    Reciever Logical System - IDC92.
    Sender - YDC64.
    Client 800 is assigned to IDC92.
    In WE42, For process Code , assiging a standard Function module - /ISDFPS/IDOC_INPUT_ET.  Do i need to change this FM?
    In WE20, Sender System YDC64 is assigned to Process Code.
    I tried with IDC92 to Process code aswell.
    Kindly advice.Your help is appreciated.
    Thanks,
    Felix
    Edited by: Felix on Mar 1, 2010 10:07 AM
    Edited by: Felix on Mar 1, 2010 10:11 AM

    Hello ,
       While processing the IDOC in LSMW; I am getting this error message now:
      Function module not allowed: IDOC_INPUT_HRMD
       The Status is 51.
    I donot know which FM has to be used for this purpose.
    Your help is appreciated.
    Thanks

  • Load customized set type using LSMW+ IDOC (XIF)

    Hi experts,
       now i could load most product field using LSMW+ IDOC (XIF), but when i load customized set type, it gives error " User-defined set type ZTest does not exist in BDOC structure ". After some study i know i must to enhance BDOC type ? but i am not very familiar with BDOC, andy idea ? ths
    also could anyone provide some function module to load product ? ths again
    Edited by: Gang LI on Apr 23, 2009 11:57 AM

    Hi,
       You will have to Re-Generate Your BDoc Structuring due to your Carried out Changes,
    Use TCode:SMW_BDM
    For Creation of the BDoc and Check.
    Hope it answers your Queries..
    Thanks and Regards,
    RK.

  • How to upload multiple company codes data for single vendor by LSMW Idoc

    Hi ,
    My requ is like this.
    uploading data by LSMW Idoc method
    In source file we have two company codes data for single vendor.
    It should create vendor for two company codes.
    But its not creating its showing error.
    How to handle this?
    Thanks in Advance.

    have you ever see this docu:
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/1a/178ac72d3011d3bc3500105a6588b2/content.htm
    You can use the recording function to create a new object (or a new "import method") if neither a standard batch input program nor a standard direct input program nor the BAPI/IDoc method is available for a data object.
    Recordings are static, thats why you cannot do such flexible things like  multiple company codes at the same time.
    But with IDOC method it is certainly possible, I have done it several times already.
    Unfortunatly the creator of this thread did not say what error he got with the IDOC method. Maybe he will add this. Otherwise I dont think that anybody can help

  • Error - ATTRIBUTE_IDOC_METADATA - EDI: Error while assigning IDoc number

    Hi,
    I'm attempting to create a simple interface which converts cutomer data from a flat file and loads it into a SAP enterprise system as an DEBMAS06 IDoc type. I am getting the error message Error - ATTRIBUTE_IDOC_METADATA - EDI: Error while assigning IDoc number in the XI message monitor.
    Has anyone come accross this error before and if so, what is the resolution???
    Thanks, in advance,
    Pete

    Hi Peter,
    did you fixed it?
    How did you?
    got the same problem
    Kind regards,
    Michael

  • Error: EDI: Error while assigning IDoc number

    Hi Everybody,
    using XI 3.0 on Linux 64 bit SLES9 with Oracle I got some probleme sending messages from mq series to sap:
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!-- Call Adapter
    -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30"
    xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"
    SOAP:mustUnderstand="">
    <SAP:Category>XIAdapter</SAP:Category>
    <SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code>
    <SAP:P1>EDI: Error while assigning IDoc number</SAP:P1>
    <SAP:P2 />
    <SAP:P3 />
    <SAP:P4 />
    <SAP:AdditionalText />
    <SAP:ApplicationFaultMessage namespace="" />
    <SAP:Stack>Error: EDI: Error while assigning IDoc number</SAP:Stack>
    <SAP:Retry>M</SAP:Retry>
    </SAP:Error>
    What is missing here?
    Kind regards,
    Michael

    Hi Jayakrishnan,
    thanks a lot for your answer.
    SM59 is working finde. In IDX1 I got the the correct RFC destination entered and a double click works fine also.
    The other way around R3 -> XI -> mq series is working fine. Here we are trying mq -> XI -> R3 and it stops sending from XI to R/3.
    How to check the IDOC type?
    Regards,
    Michael

Maybe you are looking for