Error in LSMW in Uploading Inspection Plan in QP01

Hi All,
I am facing problem when executing LSMW, I am Uploading Inspection Plan in QP01 transaction using Direct Input methos. The problem is on 13th step :Error that I get is 'No profile with entry tool for task list / / / in session INSPECTION_OBJ', here INSPECTION_OBJ is the name of the session. I have given the constant value of field profile (BIPKO-PROFIDNETZ) in mapping step and also activated check box 'entry tool' under profile to remove this error. But in that case i can pass only the header data while processing the session and control does not get into Operation and characteristic screen.
Can anyone pls help me..
Thanks in advance...

You might need to redo the recording all over again, BDC has plentty of scenario for screen selection to go wrong, so can't really tell what cause your problem based on your desc. I have been stop using BDC to uplaod material since 5 years ago, I always use Direct input in LSMW and it works much better. I recomend you try the Direct input method instead of BDC if still getting problem.

Similar Messages

Lsmw by bapi for qm to upload inspection plan qp01

I want to upload Inspection plan by Transaction qp01
<Edited by Moderator - Bhavesh Kantilal. Removed all Capitals post. User has been warned and request to move this thread to the appropriate forum has been raised.>
Edited by: Bhavesh Kantilal on Dec 20, 2008 1:50 AM

Post it here:
ABAP Connectivity
Also, Please do not use all CAPS.
It is understood as shouting at people.
Regards,
Ravi

Best Way to upload Inspection plan

Dear all,
Which is best way to upload inspection plan.
Thanx & Regards,
Harish Parab.

Hi Harish,
The Best Method is BDC as posted by others in the thread.
Please also go through the below thread for approach for Master Data Migration as discussed earlier.
[Link|Extension of Quality/Inspection Plan;
Thanks,
RKM.

Error while uploading Inspection plan

Dear Friends,
I am creating inspection plans using BDC. The MIChas 2 versions. When i am using version 1, the inspection plan is created. Whereas when i am using MIC version 2 i am getting error "error occured while checking type group".Kindly let me know how do i resolve this.
Regards
Vivek

Hi,
Thanks for the reply. when i am trying to create a inspection plan in other plant, we have 4-5 sampling procesures to select from. But for this perticular plant where we are having problem, its showing only one. How do i get more options?How do i extend a sampling procedure to a new plant.
Vivek
Edited by: vivek mankad on Feb 23, 2010 7:57 AM

LSMW for Quality Inspection Plan

Dear All,
I am in process of uploading Quality Inspection Plans through process of LSMW with standard object 0240 (Inspection Plans) with batch input method. With this when I am trying to create Batch Input Session, system is throwing me error as 'Characteristics is not yet created' (Message Number - QS 320). I have maintained all the relevant master data before going to upload Q Inspection Plan.
Could any one pl. throw light on this issue?
Regards,
Prashant

Depending on what control indicator key for master inspection characteristics have you implemented in the operations within the plan, the system checks if the characteristics are completely maintained.
This has nothing to do with LSMW, it's just a normal message,.....what I find estrange is that the message you're saying is a warning message not an ERROR message.

Long text problem while uploading Inspection plan through BDC.

Hi,
I am facing some problem while uploading the inspection plan. There are few MICs for which we are having long text, while uploading the inspection plan through BDC - some other long text is getting copied into the MIC's long text. After checking I came to know that in function module, read_text - some text which is stored in ABAP memory is getting copied into the inspection plan.
I am working in SAP release 4.7. I have checked with SAP notes: 97419, but it is also not satisfying.
Waiting for quick solution.
Thanks in advance.
Fahié

Hi a®s,
Thanks a lot for your kind reply.
My requirement is I want to maintain long text for few MICs (which are not having long texts at MIC level) in inspection plan (QP01).
When I am trying to manually assign the MIC's to inspection plan (QP01), long text is copied whereas I am not clicking the long text icon in (QP01). Long text is not maintained in MIC level, still some long text is copied to this MIC. This was also happening while uploading the inspection plan thro' BDC.
I believe what you have mentioned about function module SAVE_TEXT cannot be used here since long text is already copied before we pass the long text. Also if we pass some long text, still apart from the long text what we have passed there is some other long text copied (extra long text).
Waiting for quick solution.
Thanks in advance.
Fahié

LSMW Direct Input Inspection Plan Not Writing Inspection Char File

Hello Experts,
I am using Direct Input Program RCPTRA01 to Load Inspection Plan.
Created 3 structures - Inpection Plan/Operations/Inspection Characteristics one below the other in that order.
We have a internal numbering system for assigning Group to Inspection Plan.
I defined GROUPID column in Maintain Source Fields Inspection Plan/Operations/Inspections characteristics structures and set "Identifying Field Content" as 1.
When i read data - program is reading inspection plan and operations. But it is not writing Inspection Plan file.
What am i missing. Spent quite a bit of time trying to figure out what i am missing.
Any help is appreciated.
Thanks in advance
Thanks

Hi,
I have exactly followed the same thread.
1. I have actually maintained 3 files, but when reading it takes only the header file.
2. When Creating input session I an getting a error,
No profile with entry tool for task list / 3 in session INSPLAN
Regards
Subbu.

LSMW for Inspection Plan

Hi Sapiens,
I am a requirement to upload the Quality Management data through LSMW.
1) Quality Info Recrod
2) Inspection Plan
For the first one, I could able to create Project in LSMW and successfully do for over 200 customers.
I am saying problem in creating and uploading the Inspection Plan data.
I created one inspection plan with a material in QP01 (Tcode), and assigned one customer in "Material Assignment".
We have only hand full of materials (6-10 max) with MICs (10 - 15 max). So I using the same Inspection plan for material and I want to assign all the customer in Inspection plan at "Material Assignment". But at "Run Batch Input Record" in LSMW, it is failing. due to the below errors.
1) Field MAPL-PLNAL(2) is not an input field
2) Field MAPL-MATNR(2) is not an input field
3) Field MAPL-WERKS(2) is not an input field
I understand that these fields are repeating, as these fields are required in "Material Assignment" tab, where I will mention Counter, Matl, Plant and Customer. but it is saying these fields are not for input. If I dont use these fields in Field mapping then it will throw an error during actual recording.
So, I need some inputs on it and all of your suggestions will be valuable.
Awaiting of your reply on this soon.
thanks,
Mukesh

Hi Mukesh,
I would suggest to go for BAPI instead of LSMW for the inspection plans, if possible.
Regards,
Rahul

Error while creating Inspection plan

Hi,
While creating inspection plan in QP01, system is showing error "Material type ZROH is not defined for task list type Q''
Please help me to solve the error.
Thanks
Prasant

Hi,
This is due to the configuration error,
Just use T.Code OP50
Create an entry for task list type "Q" with material type "ZROH" and save,
Then try creating a Quality Inspection Plan, it will work
Regards
Merwyn

Inspection plan 2985 has been deleted error

Hi,
We ahve created a new material and gr made for that materail as it is coming frist time we have created a inspection plan with QP01, but when i done QA02, chnage inspection lot to calculate the sample quantity system is giving error that Inspection plan 2985 has been deleted , and we are not getting the sample quantity and also the material is not coming in QE51 to update .
regards,
zafar

Hi Zafar,
Make sure you have assigned the material to a valid inspection plan in transaction QP02, once the material is assigned to the plan then go to QA02 under the inspection spefication tab click the task list / spec button, this will then automatically assign the inspection plan to the inspection lot. If you have assigned the material to multiple plans for the same usage it will give you a pop up selection of which plan to choose. Once the plan is assigned you will be able to see the inspection lot in transaction QE51N.
Regards,
Roderick

Inspection Plan

I am creating the Inspection Plans by using the BAPI_INSPECTIONPLAN_CREATE.
I got the below errors please provide the solution for this.
1)The valid-from data has been set from today's date
2)Enter another operation number
3)Enter another operation number

hi rk.....
First One is just a Information message and last two is because of invalid activity or operation id entered wrongly...
Also u can have a look at my code for uploading inspection plan using bapi....
[Click here to view code...|https://wiki.sdn.sap.com/wiki/display/Snippets/ABAPProgramtouploadQMInspectionPlanUsingBAPI]
Also take a look at the template and sample data file attached at the given link...
Regards
KArthik D

How to create inspection plan in mass for material

Dear Guru,
How to create inpection plan for material in MASS, usually we will create inspection plan in QP01 but in mass for more than one material how to maintaain? Please help
Regards
Karthik.

Hi raja
refer following lonks
QM- LSMW FOR INSPECTION PLAN
Re: CEWB:Inspection Plan upload
bapi for qm inspection plan
Regards
Sujit

Inspection plan BDC reg

Hello friends,
We have writting one BDC for creating and changing the inspection plan, In this, the plan creation is successfully done.
when we go for change, the system throws the error "task list is invalid create task list".
once we log out the session and login again that uploaded inspection plan is shown with out any error.
we can't address this issue? Kindly help us to fix this....
regards,
sathes

Hi,
Please clarify that uploaded inspection plan is created one or changed one. To execute the changes for inspection plan the criteria in task list might be inavalid. Hence triggering the error. Please create new task list group in IA05. Thanking you.

QP01 Inspection Plans

Hi,
I am trying to upload inspection plan master data in QP01 tcode.
I was given a program in BDC which does the same. but the problem with this program is that....its not updating inspection characteristics after 13th record. line is not getting incremented. Below is my code .plz help
page_count is initialized to zero.
IF WRK-NUMB_LOOP > 1.
        PERFORM F_DYNPRO USING:
                             ' '     TRQPAS_SEL_FLG ' '.
     ENDIF.
(This below part is branced out when 13 records are processed....otherwise it skips this and does the normal process)
     IF WRK-NUMB_LOOP > 13.
         PAGE_COUNT = INCR + ( WRK-NUMB_LOOP * 10 ).
         INCR = PAGE_COUNT.
        MOVE 2 TO WRK-NUMB_LOOP.
        PERFORM F_DYNPRO USING:
                             'X'    'SAPLQPAA'    '0150',
                              ' '    'RQPAS-AB_MKNR' INCR,
                             'X'    'SAPLQPAA'    '0150'.
     ENDIF.
     TRQPAS_SEL_FLG+14(2) = WRK-NUMB_LOOP.
     TPLMKB_VERWMERKM+16(2) = WRK-NUMB_LOOP.
     TRQPAS_QUANTITAT+16(2) = WRK-NUMB_LOOP.
     TRQPAS_QUALITAT+15(2) = WRK-NUMB_LOOP.
     PERFORM F_DYNPRO USING:
             ' '     TRQPAS_SEL_FLG 'X',
             ' '    TPLMKB_VERWMERKM   INTQPMK-MKMNR.
(few more performs are here)(when branced out for 13 records...its not performing the below dynpro performs..)
IF PAGE_COUNT > 0.
        SUBTRACT 1 FROM WRK-NUMB_LOOP.            "TLDD
        TRQPAS_SEL_FLG+14(2) = WRK-NUMB_LOOP.
     ENDIF.
     CLEAR PAGE_COUNT.
wrk-numb_loop increments after one record is completely processed.
After getting to 13th line my program is not reading the perform dynpro.....code ...
any help is appreciated.

There is no such direct mapping table, cross-table or Function module that describes how the Qualitative/Quantative fields are populated.
SAP follows certain mapping to populate the values for these fields this can be cheked in SCN for Qualitative and Quantitative control indicators mapping.
Secondly to update these indicators in Inspection plan load, you can use the STEUERKZ field value from QPMK table.
This field is concatenation of the 28 control indicators (QMKST structure for Quali/Quantitative fields).
So while uploading the data for Inspection plan, Inspection chracteristics are updated in system first where STEUERKZ can be updated.
Vice versa to know what each indicator value signifies in
the field QPMK-STEUERKZ, we can use the function module QSS0_QMKST_RQMST.
Regards,
Nidhi

BDC - Creating Inspections Plans using T-Code QP01

Hi All,
I want to Create Inspection Plans using QP01 transaction using BDC.
It having 4 screens. Third and Fourth screens having line item details.
I did recording. Upto First and second screens data is populating properly, coming to third screen data is not taking even though bdctable having data (in debug mode i found). I don't know hw to resolve this problem.
Can u please explain hw to populate line-item details, possible give some example coding .
Regards,
Prabhakar

Hi,
If you are comfortable using function modules then you will not have any difficulty in using the BAPI, only thing we need to take care of the following, refer the following this is not using the bapi for Inspection plan, this is done for different purpose, still you can refer this and use accordingly,
Data declarations,
DATA: TOPNODEONLY LIKE BAPICO_GROUP-TOPNODEONLY,
      RETURN LIKE BAPIRET2,
      LT_HIERARCHYNODES LIKE BAPISET_HIER OCCURS 0,
      LT_HIERARCHYVALUES LIKE BAPI1117_VALUES OCCURS 0,
      LS_HIERARCHYNODES LIKE BAPISET_HIER,
      LS_HIERARCHYVALUES LIKE BAPI1117_VALUES,
      LV_FLAG TYPE I,FLAG.
DATA: BEGIN OF ORDERS OCCURS 0,
      ORDER_GROUP TYPE GRPDYNP-NAME_COALL,
      DESC(30),
      ORDER TYPE GRPVALUES-VFROM,
      END OF ORDERS.
START-OF-SELECTION.
CALL FUNCTION 'WS_UPLOAD'
       EXPORTING
            FILENAME = FILENAME
            FILETYPE = 'DAT'
       TABLES
            DATA_TAB = ORDERS.
SORT ORDERS BY ORDER_GROUP ORDER.
LOOP AT ORDERS.
    IF LV_FLAG NE 1.
      TRANSLATE ORDERS-ORDER_GROUP TO UPPER CASE.
      LS_HIERARCHYNODES-GROUPNAME = ORDERS-ORDER_GROUP.
      LS_HIERARCHYNODES-DESCRIPT = ORDERS-DESC.
      LS_HIERARCHYNODES-HIERLEVEL = 0.
      LS_HIERARCHYNODES-VALCOUNT = 0.
      APPEND LS_HIERARCHYNODES TO LT_HIERARCHYNODES.
      LV_FLAG = 1.
    ENDIF.
    CLEAR LS_HIERARCHYNODES.
    LS_HIERARCHYNODES-GROUPNAME = ORDERS-ORDER.
    LS_HIERARCHYNODES-HIERLEVEL = 1.
    LS_HIERARCHYNODES-VALCOUNT = 0.
    APPEND LS_HIERARCHYNODES TO LT_HIERARCHYNODES.
    AT END OF ORDER_GROUP.
      FLAG = 'X'.
    ENDAT.
    IF FLAG = 'X'.
BAPI is called to create Internal Order group in the system
      CALL FUNCTION 'BAPI_INTERNALORDRGRP_CREATE'
           TABLES
                HIERARCHYNODES = LT_HIERARCHYNODES
                HIERARCHYVALUES = LT_HIERARCHYVALUES.
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
      CLEAR : LT_HIERARCHYNODES[], LS_HIERARCHYNODES.
      CLEAR : LV_FLAG,FLAG.
    ENDIF.
ENDLOOP.
Hope this helps,
Rgds,

Error in LSMW in Uploading Inspection Plan in QP01

Similar Messages

Maybe you are looking for