ERROR IN LSMW master data in PA40

While trying to upload employee master data through LSMW for PA40, at the time of execution batch input session,personnel number is not generating automatically..
Thanks in advance

Hi,
When you are using transaction code PA40 in LSMW, pls use Internal Number Range instead of External as LSMW doesn't work well with External no. range. Also for the upload, configure only the basic infotypes like 0000,0001 & 0002 in the infogroup and rest of the infotype maintain it through PA30.
Hope this helps.
Thanks
Ranjeeta

Similar Messages

  • Authorization Issue in creating HR Master data through PA40

    Hi,
    I am facing an issue while creating HR master data thru PA40. On the first screen, I select Action Type Hire, put personnel area IN01,EE Group 1, EE Subgroup N2 and Execute. It takes me to the next screen. there I put all the information required i.e., Personeel No., Start date, Title, Last name, First name, Date of Birth, Action Type (Hire), Reason of Action 06, position 40208, Personnel Area In01, Personnel Sub area 0001. when I save it, It gives me an error No Authorization to maintain Actions 01 exists  I have SAP_ALL.
    Any idea why this error is coming?? Same setting is running fine in another client.
    Thanks,
    Parul

    Hi,
    On the same screen where error is coming type tcode-SU53 this will display if still some object is missing for authorisation.Then give that object to your basis guy to include in ur role.
    thanks
    Deepa

  • Error while deleting master data (Message no. RSDMD118)

    Dear all,
    I am performing a test to create and delete new Company Codes in Consolidation Workbench.
    Creation of new Company Codes went on successfully but deleting them give me the following error message upon saving:
    Error while deleting master data
    Message no. RSDMD118
    Since they are new Company Codes, they have not been used and stored in any BW cubes. Any idea on why BCS prevents me from deleting them?
    Appreciate assistance to troubleshoot and resolve this error.
    Thank you.

    Thank you both for your replies.
    I am sure those are not the case here as I deleted the Company immediately after creating it.
    Just to make sure, I performed "Where-Used List" again and BCS confirmed that it is not being used anywhere:
    Use of: Company UAT1 UAT Company 1
    Number of Uses Found: 0 
    However, the same error message was displayed again after I tried to delete the Company and save the configuration. Still can't find any solid reason behind this.

  • Error while loading master data.

    I am facing error while loading master data in a infoobject.
    The error comes when I run DTP fo rloading data from PSA to infoobject.
    The error wordings are : "MCK_PRDT1 : Data record 1 ('Bleach '): Version 'Bleach ' is not valid"
    Please help me in understanding this Version errror and suggest a solution for this.

    SAP metodology integration MDM & BW you can look at:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0f1f135-0015-2b10-5e83-acca118e17aa
    You can turn matching strategy in MDM Data manager for delete dublicate of records
    and then use MDM Syndicator for export data to file and then load that file to BW
    If you use OHD you cannot load from BW to MDM repository 10 records and unload only 5 because
    in BW every record has unique key.
    also you can use MDM ABAP or Java API for delete dublicate of records
    Edited by: Kanstantsin Chernichenka on May 8, 2009 1:02 PM

  • BI 7.0 - Duplicate Record Error while loading master data

    I am working on BI 7.0 and I am trying to load master data to an info object.
    I created an Infopackage and loaded into PSA.
    I created transformation and DTP and I get an error after I execute the DTP about duplicate records.
    I have read all previous threads about duplicate record error while loading master data and most of the them suggested to check 'Ignore duplicate records' option in the infopackage. But in 7.0, I can only load to PSA with infopackage and it doesn't have any option for me to ignore duplicate records.
    My data is getting loaded to PSA fine and I get this error while loading to info object using DTP.
    I would appreciate your help to resolve this issue.
    Regards,
    Ram.

    Hi,
    Refer:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/45/2a8430131e03c3e10000000a1553f6/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/d0/538f3b294a7f2de10000000a11402f/frameset.htm
    With rgds,
    Anil Kumar Sharma .P

  • 36 duplicate record  found. -- error while loading master data

    Hello BW Experts,
    Error while loading master data
    ( green light )Update PSA ( 50000 Records posted ) No errors
    ( green light )Transfer rules ( 50000  „³ 50000 Records ): No errors
    ( green light )Update rules ( 50000 „³ 50000 Records ): No errors
    ( green light ) Update ( 0 new / 50000 changed ): No errors
    ( red light )Processing end: errors occurred
         Processing 2 finished
    ƒÞ     36 duplicate record found. 15718 recordings used in table /BIC/PZMATNUM
    ƒÞ     36 duplicate record found. 15718 recordings used in table /BIC/XZMATNUM
    This error repeats with all the data-packets.
    what could be the reason of the error. how to correct the error.
    Any suggestions appreciated.
    Thanks,
    BWer

    BWer,
    We have exactly the same issue when loading the infoobject 0PM_ORDER, the datasource is 0PM_ORDER_ATTR.
    The workaround we have been using is 'Manual push' from the details tab of the monitor. Weirdly we don't have this issue in our test and dev systems, even in Production, this doesn't occur somedays. We have all the necessary settings enabled in the infopackage.
    Did you figure out a solution for your issue, if so please let me know and likewise I will.
    -Venkat

  • Strange error while loading master data

    Hi,
      Has anybody seen the following error while loading master data?
    6 duplicate record found. 886 recordings used in table /BI0/XCOSTCENTER
    6 duplicate record found. 886 recordings used in table /BI0/PCOSTCENTER     
    and repeat again once (so total 4 lines of error message)
    The update mode is "PSA and then in the infoobject (Package by Package)"
    Surprisingly the step by step error analysis shows all green except in step "Processing error in Warehouse reported?" which is red.  The over all status i.e. Total and  Technical are both red.
    It all means something went wrong but with the step by step error analysis all green even in the parts like "Processing successfully finished" and "All reported data packet received" I am confused.
    To make matter more confusing there are no error records in corresponding PSA data package.
    any comments would be greatly appreciated.

    Hi Novice,
    In your InfoPackage > Processing tab, select the option Only PSA and Update subsequently into Data Target, and also add the check mark for Ignore double data records. Then try the load again...it should be okay.
    Hope this helps...

  • "Error reading credit master data"  in contract management in CRM 7.0

    Hi All,
    In CRM 2007,whenever we navigate to contract management screen,error message come which is "Error reading credit master data "
    Any suggestion on how to solve this issue.
    Regrads
    Nikhil

    Hi All,
    This is resolved.
    Just set the  entry in the table CRMV_CREDIT_GEN to 'Do not Display credit master data '
    Regards

  • Caller-70 Error while loading master data into infoobject

    hi ,
    I am getting following error while loading master data into infoobject (0tb-account). I am loading this master data in production environment for the first time. there are about 300000 records. All have got loaded upto PSA. Infopackage settings were PSA and then into data target.
    Short dump in the Warehouse
    Diagnosis
    The data update was not finished. A short dump has probably been logged in BI. This provides information about the error.
    System Response
    "Caller 70" is missing.
    ST22 dump analysis is as below:
    Termination occurred in the ABAP program "GP476CZYBEF2WX53UZ8TXFG6XOS" - in                  
    "VALUE_TO_SID_CONVERT_DB".                                                                  
    The main program was "RSMO1_RSM2 ".
    Please help as soon as you can..Production problem....
    Regards
    Rakesh

    Hi rakesh,
    May be IDOCs not processed completely,
    Idoc Problem, Either wait till time out & process Idoc from detail monitor screen, or go to BD87 & process Idoc with status = YELLOW ( be careful while processing IDOCS from BD87, choose only relevant Idocs
    Cheers
    Raj

  • Error when generating master data routines

    Hello all,
    I´m trying to activate 0BPARTNER but an error appears: Error when generating master data routines, and no more information is provided.
    I´m working with BW 7.0.
    Has anybody had this problem?
    How could I solve it?
    Thanks in advance.
    Carmen

    Hi Carmen,
    I'm working with SAP BW 700 and I had also this error during a characteristic activation in my QA system. This happened when I tried to transport the activated characteristic from my DEV system.
    I found  also message TK425 when I was trying activation through RSDG_IOBJ_ACTIVATE program.
    I solved this error message with OSS note 01458319 700SP24: "Transport fails during the impact analysis of DTP".-
    I hope this helps.
    Best Regards.
    AW

  • Error when generating master data routines when activating infoobject

    Hello Gurus,
    I had an issue with one of my info object.
    I Created the one Custom InfoObject  with Just 5 Char without any masterdata and used that in many cubes. we promoted the objects and cube to test and production systems. just couple of days back we can see the InfoObject  went to inactive status even though the version is active(not sure how it happend). This is only happens in our test system and production is working fine. when i try to activate the InfoObject  again the test system it gives me an error
    Characteristic XXXXX: Error when generating master data routines. Tried to correct in RSD5 etc. Checked in RSRV everything is fine. Tried to re-promote the object from Development system. The transport also failed with the same error even though it is in unconditional mode.
    Can you please suggest me what are the options.
    i cannot delete the object as it is used in many cubes which is having data.
    Appreciate your quick response.
    Thanks,
    Bhaskara Rao.

    If your Prod is working fine, it should work in test too.
    Did it ever worked in test after transport?
    Is it possible some one tried to change something in test? If yes, you will get error when you will try to re-transport it as new transport can't find the previous structure.
    You may try to activate the IO using FM RSDG_IOBJ_ACTIVATE
    Edited by: ashok saha on Mar 6, 2008 8:05 PM

  • "Error reading crrdit master data " error in Contract management(CRM 2007)

    Hi All,
    In CRM 2007,whenever we navigate to contract management screen,error message come which is "Error reading credit master data "
    Any suggestion on how to solve this issue.
    Regrads
    Nikhil

    Hi All,
    This is resolved.
    Just set the  entry in the table CRMV_CREDIT_GEN to 'Do not Display credit master data '
    Regards
    Ankit

  • Error while performing Master Data transfer from SAPR/3- ECC5.0 to SCM4.1

    Hi all,
    Am getting an error while transfering Master data from SAP R/3 system ECC5.0 to SCM4.1 through Core Interface (CIF).
    After creating an Integration model and while activating the same am getting the following error,
    " System: SCMCLNT800    User:  SMART03 06/17/2006 13:32:14
    Function: /SAPAPO/CIF_LOC_INBOUND
    Text:Error in address data for location DC2000/ECC800 "
    Could anyone provide me how to fix this?.
    Regards
    Bharanidharan

    Hi Veera,
    Am sorry for the delayed response. Well am using XI as integration engine for transfer of transactional data from R/3 to SCM4.1. I resolved this issue which was because of master data problem. Thanks for your input.
    Regards
    Bharanidharan

  • Error while loading master data attribute

    Hi Guru's
    I am getting below mention error while loading master  data attribute.
    0MANU_MATNR : Data record 1035 ('000000000000229058 '): Version 'BDM755s ' is not valid
    Please sugggest how to resolve ?
    Regards
    Karan

    Hi,
    I think there is problem with "0MANU_MATNR" Data, check the records 1033 to 1036 and find the differnce between 1035 record and other records, some values is giving problem so by looking at other reocrds i.e 1033,1034,1036. Check in PSA in Monitor. 
    Note: If any problem with Upper/Lowe case then use TOUPPER in Transfer Rules
    If need use Conversion exits in transfer rules.
    ALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        INPUT         = 0MANU_MATNR
    IMPORTING
       OUTPUT        =   Result .
    or
    ALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
      EXPORTING
        INPUT         = 0MANU_MATNR
    IMPORTING
       OUTPUT        =   Result .
    Thanks
    Reddy
    Edited by: Surendra Reddy on Mar 3, 2009 11:46 AM

  • 0COSTCENTER Error when generating master data routines

    Hi,
    Characteristic 0COSTCENTER properties are changed. Check box - Characteristic is document attrib. has been checked in. Then the same is saved and activated. Again when trying to remove the check box and activating the 0COSTCENTER characteristic, the system says 0COSTCENTER Error when generating master data routines.
    The Object Status of the Characteristic is showing in "Inactive, not executable".
    Erorr message is:
    Error in activating the InfoObjects
    Message no. R7286
    Please let me know how to activate 0COSTCENTER.
    Regards,
    Ravi

    This has been solved.
    In SE14, I have also deleted the data.
    Go to Tcode SE16, IO Class is BW* and then select the relevant attribute then execute, select all the line items.
    Go to Table Entry ==> Delete.
    Go to Tcode RSODADMIN and Tab => Go to Generate Document Properties Tab ==> Select the Characteristic ==> Click Generate Document Properties.
    I am able to activate the Infoobject 0COSTCENTER again.
    Hopefully, this would be helpful for others also.
    Regards,
    Ravi

Maybe you are looking for

  • CS2 Premium Installation on Win: Invalid Serial Number

    Hi, id like to install my old CS2 Premium for Win again. Since installation from CDs doesnt work anymore (activation server down), i downloaded the installation files from http://helpx.adobe.com/de/x-productkb/policy-pricing/creative-suite-2-activati

  • Issue with Java date when different timezone involved

    Hi I am facing a problem with java util and SQL date due to different time zones, We have a applet which displays data as gant chart( microsoft project type) We have our server in NY (EST) which reads data from database (in EST) and sends this data t

  • Laptop won't turn on!!! why?

    Here we go again!!   Gateway laptop, 6 months old... was a trade because they had to " JUNK" my other one that was only 8 months old!  gosh! WELL ... I closed the laptop this afternoon, unplugged it... put it in the other room until dinner was done. 

  • Using  FDM Import Action script to import data from ERPI table "tdataseg_t"

    Hi Experts I have extracted data from EBS using ERPI and loaded into the intermediate table "tdataseg_t" I am trying to use Import Action script within FDM to extract data from "tdataseg_t" table (where ERPI extract data is stored) as i could not use

  • Photoshop CC not opening on my Mac

    Starts to run but when it gets to initializing panels I get the beach ball of death. Any ideas? I have just updated the software as well because I thought it might be that but no change. All help appreciated.