Error in LSMW Specify Files option

Hi Gurus,
I am getting error while doing Specify Files option while using below mentioned object:
Object 0210 Storage bin (WM)
Method 0000
Program name RLPLAT00
Program type B Batch input
Error :
In Convert data option i am entering below details:
Logical Path /TMP
Logical File MM_WM_BIN_TAKEOVER
I am getting error :
Logical file 'MM_WM_BIN_TAKEOVER' is not assigned to physical file 'UPGRD_MTD_WM_TEST.lsmw.conv'
Cany anyone suggest what should i do to execute this?
Regards,
Arpit

Hi Guys,
I have solved my problem. Please refer below note for solution of this problem:
Note 753511 - Logical and physical path and file name in transaction LSMW
Our LSMW version was upgraded to 4.0 hence i was getting this error. I have provided Logical file name and Path accordingly to solve my problem
Arpit

Similar Messages

LSMW, Step - Specify Files option

Dear Experts,
Please explain the details at Specify files options in LSMW
I want to know about following options -
1) Legacy data on PC (Front end)
2) Legacy data on the R/3 server (Application Server)
3) Imported data File for imported data (Application server)
4) Converted data File for converted data (Application server)
5) Wild card value Value of wild card ' * * in file name.
Thanks in advance

1) Legacy data on PC (Front end)
-- defines that SAP shall find and upload the source file from your PCs Harddrive (can as well be a network drive)
2) Legacy data on the R/3 server (Application Server)
-- defines that the source file is to be found in the file system of your SAP system
I use this often when we merge SAP systems, so I can send IDOCs from old SAP system to new SAP system and output the IDOCs directly as file. This file can then be found in on the SAP application server. (you can display the SAP directories with AL11 transaction)
3) Imported data File for imported data (Application server)
- this is the internal file LSMW writes the data to when it uploads from PC or application server.
4) Converted data File for converted data (Application server)
- this is the internal file LSMW writes the data to when it converts from imported data file using the mapping rules.
5) Wild card value Value of wild card ' * * in file name.
- This allows you to use to use the same LSMW for many many similar files (e.g. if you migrate materials and you get extra files from each company) without the need to change the above entered names.

Error 127: The specified file or directory name is invalid

Hello,
I am trying, for the first time, to Groom a users home directory. I had created user Home directory policy and have added vault and groom...

On 5/14/2013 7:16 AM, nwadmsitn wrote:
>
> Hi,
>
> I'm trying to evaluate File Reporter. I have installed the agent on a
> OES11 box. This agent is acting as my proxy agent.
>
> Then i setup a policie to scan a volume on 2 differents server. One is
> OES11, the other is OES2.
>
> When i launch my policies i have very differents result :
> - Volume Free Space : After 5 attempts finally it is working
> -File System DATA : I have most of the time this error : (127) - The
> specified file or directory name is invalid. Sometimes Operation is
> successfull but in the reports i have only data for 1 of the 2 volume
> and only for 2 directories
>
> In the log file of the nfr proxy agent i have this kind of error :
> 01 2013-05-14 13:00:29 7200 3 0006 5953 7f674b5e0700
> SRSScanAndCollectFileSystemDataService::FinalizeSc anDataEntry() - Worker
> thread encountered an error and is exiting, Scan ID = "18", Result = 0.
>
> Can someone help me ?
>
> Stephane
>
>
Stephane,
Just to clarify a few things:
1. Do you get these results for both scan targets? Or only a proxied
scan of the OES11 or OES2 volume?
2. What sort of volumes are being scanned? NSS? AFP? NCP? What's the
underlying Linux filesystem type, if applicable?
Thanks for helping us understand your problem better.
- NFMS Support Team

Lsmw Error during the specify files

While doing Material master upload thru lsmw...using Batch input method
During the specify files step i am getting this error
File Name 'Converted Data': Max. 45 Characters. Remaining data saved.
Message no. /SAPDMC/LSMW_OBJ_060028
Pls Guide me.......

Hi,
How you save your source file? Need to be saved in as TAB delimited file
OK. Check link:
http://www.sap123.com/a/98/#loading-material-masters-with-lsmw-direct-input-method
http://www.slideshare.net/arun_bala1/sap-sd-lsmw-legacy-system-migration-workbench
Regards,
Biju K

LSMW Specify files - file on Application server

Hi friends,
I have a silly doubt, how can i speify the file for LSMW on Application Srever, i mean i want the example, i tried giving logical path and file name, but it gives error saying file can't read.
Thanks a lot.

In the Specify file step double click on the following option
Legacy Data On the R/3 server (application server)
Enter the application server file name with full path and description.
Like /tmp/test.txt

LSMW -Specify files -No logical path specified

HI,
While i specify a file in lsmw in specify files from pc front end in legacy data and i try to save. It says " no logical path specified " in the message bar.
kindly help me in this issue.
i am unable to go further as I cant specify files.
Thank in advance

Hi Srivasta
You just put any, not used logical file name in your file definition step. LSMW will create this logical file byself und will use when is needed, but you just forget about it in future. Don't forget to recreate this file, when you move your LSMW to test and production systems, it is not created automaticaly there.
The way you enter logical path and logical name is,
Within the LSMW option 'Specify Files', Double click on
'Converted Data' and a popup box will allow you enter
file name , logical path and logical file.
cheers
Sameer

Lsmw- specify files step

In lsmw im not able to get any our put in the step read data it is showing me error not able to read file.
i check with the files in apllication server as well as the path i specified in lsmw .they both are same with out any case sensitive.
step specify files:
so now import data
and convert data are there in the same step.
now when i specify the import data ,it is throwing me an information message this file has already been assign to another object.
it is showing the same for convert data as well
so now my question is due to this i may not be able to read the data or what ?
thanks in advance
Aru
reward points given .

Hi this can happen because of 2 reasons
1) If you are using 2 structures ( Header and Item ) then their are some fields which should be in both structures . And those field should have same value
You can check this in step ( Generate read programme ) . At this step there is statement like
loop at HEADER_ITEM_DATA
where OLD_SERVTICKET_NUM =
HEADER_DATA-OLD_SERVTICKET_NUM
in the above example OLD_SERVTICKET_NUM is a field which both structures should have same value
2) Second reason can be that number of fields in your flat file might not be same in your structures fields which you have defined in 3rd step
Plz check
Reward points
Thanks

LSMW - Specify Files - erro message

Hi,
Getting the erro message "No logical path specified" when specify files.
how to solute it.thank you.
regards.
sophia

in step 7 where u specify file, drop down imported data folder and give any file name like "test.lsmw.read" .
also specify a file name for converted data "test.lsmw.conv"
the system will automatically generate files on application server..
dont use " " with file name..and remember to use correct extension i.e. .lsmw.read & .lsmw.conv
plz reward points if dis helps
Edited by: abapuser on May 8, 2008 12:05 PM

LSMW Specify files--multiple files

Hi ,
I have the data in two files.
how can i specify these two files . i know we have to use the option wildchar in hte step "specify files"
can anyone give me the exact procedure to do the same.
Thanks in advance

Hi Kiran,
U don't always need to use wildcards - if u have 2 files and u know their full names then there's no need for wildcards. It depends on how many source structures u defined in "Maintain Source Structures" step.
If u have 2 source struc. and 2 files (1 file for each source) then it's very simple:
In "Specify Files" step, create the 1st file. Then click on "Legacy Data" again and click create again. Enter the data (name etc.) and confirm. Now u will see 2 files (on both u have to choose "Data for one source structure" radio button). Save and go to the next step "Assign Files": here assign to each source struc. its own file and u're done.
If u have 2 files for 1 source u can simply create a new file and copy both files into it one after the other.
If it's another case describe it so i can answer.
Usually the use of wildcards is done only when u have a long list of files and it's to much work to create them all or a part of the file name is not constant.
Pls reward if helps.
Igal

LSMW "Specify Files"

Hi,
In the LSMW steps, when I am using SPecify Files , I want to set values of 'File Content' , 'Delimiter', 'File Structure',
'File Type','Code Page' along with the Path and Name of a excel file. Can you tell me what will be these values when the
file is an EXCEL file.
Useful answer will be rewarded.
Regards,
Tanmay

hi Tanmay,
for uploading data from excel sheet you have to save your excel file in ".csv" format. i.e. "csv-comma delimited" or "text with tab delimited".
FIRST SAVE YOUR EXCEL SHEET WITH ",csv" format
In the step SPECIFY FILES->SELECT LEGACY DATA ON pC->select create button on toll bar->specify path->give name
here only u can specify 'File Content' as data from one structure , 'Delimiter as comma', 'File Structure' as filed order matches source structure definition,
'File Type' as Record end marker(text file),'Code Page' as ASCII.
if useful reward points

LSMW specify files error

A little help gurus
When I save the .txt file into the LSMW, an error comes out that says "File Name 'Converted Data' : Max 45 Characters . Remaining data saved."
What does this mean? What impact does it have in LSMW?
Thanks in advance

Hi,
For example if the field name in sap, say name of the vendor is only 35 characters and you have maintained in the flat file 40 characters. the system will through a warning saying that the data is exceeding my 5 characters so the sap system will reduce that 40 characters to 35(means the system will cut the last 5 characters) and load it.
It is recommended that the field name should not be over the size of the field length provided my SAP.
Thanks & Regards,
Kiran

Error in LSMW while specifying file for Material Cassification and Info Rec

Hi Friends,
I'm getting an error in LSMW while specifying file for Material Cassification and Info Record using batch input method.
The error message i'm getting is:
"Length of physical file name 'R2R_33_PURCH_INFR_1_PIR_CREATE.lsmw.conv' cannot be longer than 30 characters
Message no. /SAPDMC/LSMW_OBJ_060049"
I tried changing the file name but that is not working out. Please help.
Thanks,
Amit

Hi,
Just try this,
Go to LSMW, Specify file option, use display/change (Ctrl+F1)
Select the converted data and double click, change the file name there,
You will be getting it as "'R2R_33_PURCH_INFR_1_PIR_CREATE"
Just trim this to "'R2R_33_PUR_INF_1_PIR_CRE" and try...
Regards
Merwyn

Lsmw error 'Specify Files first' while executing option 'Read Data'.

Hi All,
while trying to create mass users through LSMW, i am gettign the error 'Specify Files first' while executing option 'Read Data'.
I have specified file (.txt), manually created (with'1 tab space' between each term). i have used option 'On the PC(Frontend)'. No error while saving.
Next- i have executed 'Assign Files', where the file appeared automatically.
Next- Here, when i try to execute 'Read Data', i get the error 'Specify Files first'.
Can anyone help in resolving this error.

Hello Plaban,
What is your purpose? Are you tring to upload the data with more file variant?
There are two possibilities to make file names more variable:
1.If you choose system dependent file names by setting the according flag (in the first step 'Maintain object attributes'), you can define file names for each system in step 'Specify files' by assigning the files to a specific system ID (with a double-click on the specified file).
2.You can use wildcards in the file names where you can assign several values.
I hope this helps you.
Regards,
Blanca

Error-lsmw -in the step specify file

HI ALL,
Iam struck up in lsmw . I doing for the transaction "mb11" , opening inventory balance .
when i do the step " SPECIFY FILE " , iam getting error like "specify a logical path " . I have choosed a file on the local pc .
what would be the problem .
Plz help me in this.
thanks,
regards,
rajkasi.

Just choose one of the logical files from the dropdown. This is not where you specify the file from PC. Hopefully there is one called "TEST". This is what I use for all of my LSMWs. It's just asking for a place to put the data that is read and converted.
Regards,
Rich Heilman

While specifying file in LSMW it is giving an error while saving 'No logica

while specifying file in LSMW it is giving an error while saving 'No logical path has been specified'.why it is coming like that?

Hi Shree,
This error looks like that you have attached the activity to the work center and there is no rate has been maintained in KP26. Please maintain the activity ...for1000/300008/LABORP
for the period and try to repeat the costing run.
I hope this clarifies...
Regards
Rajesh A

Error in LSMW Specify Files option

Similar Messages

Maybe you are looking for