Error in LSMW while specifying file for Material Cassification and Info Rec

Hi Friends,
I'm getting an error in LSMW while specifying file for Material Cassification and Info Record using batch input method.
The error message i'm getting is:
"Length of physical file name 'R2R_33_PURCH_INFR_1_PIR_CREATE.lsmw.conv' cannot be longer than 30 characters
Message no. /SAPDMC/LSMW_OBJ_060049"
I tried changing the file name but that is not working out. Please help.
Thanks,
Amit

Hi,
Just try this,
Go to LSMW, Specify file option, use display/change (Ctrl+F1)
Select the converted data and double click, change the file name there,
You will be getting it as "'R2R_33_PURCH_INFR_1_PIR_CREATE"
Just trim this to "'R2R_33_PUR_INF_1_PIR_CRE" and try...
Regards
Merwyn

Similar Messages

While specifying file in LSMW it is giving an error while saving 'No logica

while specifying file in LSMW it is giving an error while saving 'No logical path has been specified'.why it is coming like that?

Hi Shree,
This error looks like that you have attached the activity to the work center and there is no rate has been maintained in KP26. Please maintain the activity ...for1000/300008/LABORP
for the period and try to repeat the costing run.
I hope this clarifies...
Regards
Rajesh A

Error during creation of transfer orders for mateRIA

hi gurus,
I am getting an error while moving material from sl0c2 to sloc1 which is connected to wh by mvmt 321. the document is getting posted and the stock is coming to sloc1,but the error is
"Error during creation of transfer orders for mateRIAL.how to correct the error.
regards
murugan

Hi,
The material is maintained at the Warehouse level, hence warehouse transactions have to be completed, by creating a transfer order and the confirmation of the same will create a transfer posting from SL1 to SL2 in the system. This is trigerred automatically depending on the sytem configuration.
Regards,
raghu

10.3 OS Upgrade error. An error has occurred while downloading software for your device. Please verify your internet connection or try again later

HELP ! HELP ! HELP ! "An error has occurred while downloading software for your device. Please verify your internet connection or try again later, if the problem persists." appears while attempting to upgrade or install BlackBerry Device Software. upgrading my Z10 OS to 10.3 on both (link & web). but facing same problem again and again. plz help. internet speed is 1mbps and working fine.

I suggest you try the very clean and very forceful AutoLoader method:
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
Beware that it is completely destructive...the device will be "like new"...no data, no apps, no accounts, etc. Be sure you take a full backup first, as well as make full manual documentation of all apps, accounts, configurations, etc. Sometimes a restore reintroduces the very corruption one is trying to eliminate, and manual reconfiguration is necessary.
You can also use this to fall back to a prior OS if you desire...you can install any OS level for which you can find an AutoLoader. (Hint...search over on the CB site!)
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Error during creation of transfer orders for material

Hi,
We are doing a transfer of stock from one storage with WM to a storage without WM.
But system does not finish the process automatically displaing the following error message:
"Error during creation of transfer orders for material document 49000XXXX"
System cannot find source storage bin
Thanks in advance for the help
Regard
Enzo

your picking strategy does not find the bin where the material is.
So you need to check what value you have entered for picking in WM view of material master.
then you have to check where your material is (storage type and bin)
then you need to check customizing to where what storage types are included in the picking strategy that is tight to the material master entry.

Error : Excise modvat accounts not defined for GRPO transaction and U1 exci

I have Created Impot PO, After Planned Delivery cost MIRO I am trying to Perform GR then its giving Error "Excise modvat accounts not defined for GRPO transaction and U1 excise group
Message no. 8I402"
I have already maintained GL account in "Specify G/L Accounts per Excise Transaction" for Excise group U1
This problem is coming when Additional Duty on custom condition type JADC is maintained in "Maintain Excise Defaults" node in the column "ADC Cond" . If I remove JADC condition type from this place the this error is not coming but AED column is not fetching any value while doing GR.
Please help me in this issue , still No answer
Edited by: shiwanshu singh on Jan 28, 2009 10:26 AM

Dear sir
For GRPO have you maintained sub transaction Type IP for your excise group U1. If you not maintained pl maintain . and assign G/L account to modvat clearing account , the G/l account should be same as company code CVD account.
Regards
jrp

I want to edit properties of the interface windows opened while "Open File", "Save Page As" and interface opened during Downloading of any file.

I am doing a small project on dedicated web client where in user automatically logs in non-root user and Firefox automatically starts.
I am using Fedora 14 kernel 2.6.35.12-88.fc14.i686 and Firefox 3.6.16.
I have installed only Gnome in my computer with no Nautilus or other file browser on it.
I want to edit properties of the interface windows opened while "Open File", "Save Page As" and interface opened during Downloading of any file.
Please guide me for this.

First, I sent an email to the author of PhotoME to inform him of the serious issues his addon caused with Firefox latest versions.
Now, for those of you who do not have the PhotoME addon and yet experience the same problem that I had and that I described above, I suggest the following strategy.
As PhotoME did cause these problems with Firefox latest versions, I am pretty covinved other addons probably might cause these problems too. Therefore, adopt the following method.
Test one addon at a time to see if this particular addon is behind your Firefox issues like the ones I had.
So, disable one addon only at a time. Then close your Firefox and restart it from scratch and see if you still have your Firefox problems. You must restart the Firefox browser from scratch. If you still have these Firefox problems, re-enable the disabled addon, restart your Firefox (again!) and repeat the same method for every single addon that you have.
Try to be selective by choosing first addons that are more likely to cause your Firefox problems such as not very well-known or not very popular addons (like it was the case for the PhotoME addon).
If this method works or if it does not work, report it on this web page so that others can be helped with your comments.
I hope this method will help you because I was really upset that I had these Firefox problems and I first thought it was the fault of Firefox, only to discover later that this PhotoME addon was the culprit and had caused me such upset.

ERROR - Excise modvat accounts not defined for CEIV transaction and excise

Hi friends,
I have created excise invoice J1IS- and release to account in J1IV.When I trying to cancel excise invoice in J1IH -> CANCEL excise invoice.ssystem giving error Excise modvat accounts not defined for CEIV transaction and excise I have check account in customization for CEIV and excise group the following accounts are already assign.
CEIV          CR Credit     MSUSP CENVAT suspense
CEIV          DR Debit     PLAAED PLA AED account
CEIV          DR Debit     PLAAT1 PLA AT1 Account
CEIV          DR Debit     PLABED PLA BED account
CEIV          DR Debit     PLASED PLA SED account
CEIV          DR Debit     RG23AED RG 23 AED
CEIV          DR Debit     RG23AT1 RG 23 AT1
CEIV          DR Debit     RG23BED RG 23 BED
CEIV          DR Debit     RG23ECS RG 23 ECS
CEIV          DR Debit     RG23SED RG 23 SED
where I have to assign modvat account please help me.
Regards,
Chetan

Dear Chetan
Go to IMG -- Logistics-General --> Tax on Goods Movements --> India --> Account Determination --> Specify G/L Accounts per Excise Transaction.
There, check whether for series group, company code, chart of accounts, you have maintained CEIV. It should have been missing at your end and hence the problem. Maintain the required G/L Account in the above area and retry.
thanks
G. Lakshmipathi

UWL config file for Customer, Vendors and Materials

Hello All,
We are trying to integrated uwl to connect to a MDM system for objects Vendors, Customer and Materials. I have looked at the MDM UWL config file, it is configured only for Business partners and products.. does anybody have the config file for Customer, Vendor and Material using business content..
Thanks in advance
Som

Hey Som,
If you are talking about Portal UWL, then you have to go for System Admin, there you should see UWL related iviews. There you have the ability to download the uwl xml. in that you have to do some modifications.
All that matters for your problem is the MDM System you have created. when you chanage the respository informatin at this system. then your problem should be solved.
Thanks,
Raghavendra

Need to create a Store Business document type for material master and store a sharepoint link

Hello,
I need to create a Store business document type for material master and store a URL link . How do I do that?( or is there any functionality to upload a document for a store business document that it will automatically saves to sharepoint?)
Thanks,
Ran.

>
dhayes12 wrote:
> A) When I do the (Material Backflush) MFBF for the 04 type, the Inspection Lot gets created OK. I then can go into QA32 and assign the correct Inspection Plat by clicking the Inspection Lot button.
>
> B) When I do the MIGO via the Purchase Order (type Z01), it will not create the Lot if I have the Multiple Specs selected in the QM Material Master MM02. If, I turn off the Multiple Specs in the QM Material Master and create a new PO and MIGO, it will create the Lot, however, it automatically assigns the lot to the wrong Inspection Plan (2nd Plan see above) I need to be able to select the plan like I can with the 04 type.
>
> Is their some setting that can be changed in Config or somewhere that acts the same way as example A above?
For case A, create insp plan with usage "1- production" If you have one IP with this usage for given material then system will assign Plan to lot automatically. In your case for second plan update usage as 1.
For case B, system should assign 1st plan make sure for both plan udage is correct. for 1st plan usage should be 5 while 2nd plan usage should be 1. Now if your 1st have status 4 and key date before lot date then system will assign plan auto.
Thanks!!!

TS3221 I am trying to update my iPod touch to the new iOS, but the error message "An error has occurred while backing up this iPod (0xE800067)" and asks me if I want to continue (which will "result in the loss of all contents on this iPod"); what is the p

I am trying to update my iPod touch to the new iOS, but the error message "An error has occurred while backing up this iPod (0xE800067)" and asks me if I want to continue (which will "result in the loss of all contents on this iPod"); what is the problem?

Maybe:
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting
Also see:
iOS: Troubleshooting backup issues in iTunes

Error: Common entries are not permitted for plan queries and input queries

Hi,
I have a 2 selections in the column struct:
1. year = 2005, version = actual
2. year = 2006, version = plan, marked as data can be changed using user entry or planning function
row has posting periods from 1-12
in the workbook I have inserted this query in the workbook in analysis grid. it runs good.
now i added a button and assigned planning function to it. this planning function copies 2005, actuals to 2006, plan.
when i execute the workbook and hit this button, it gives me following error:
"Common entries are not permitted for plan queries and input queries"
please can anyone provide me assistance with this issue.
thanks,
sam

when i go to diagnosis it displays following:
Diagnosis
InfoProvider ZIP_PLAN2 must be described in this application by both a plan query and by a input-ready query, which is directly defined on the InfoProvider ZIP_PLAN2.
System Response
This is not permitted.

I have accidentally deleted off my Mac a preferences file for Adobe photoshop and now the program cannot initialize. I have talked to Apple and then say that if Adobe can isolate the file they can help me restore it from my time machine. How do I isolate

I have accidentally deleted off my Mac a preferences file for Adobe photoshop and now the program cannot initialize. I have talked to Apple and then say that if Adobe can isolate the file they can help me restore it from my time machine. How do I isolate the file ?

Do you have the path to this file and name of this file?

I would like to upload a file for a client and have it expire (lock them out of it) at a prescribed time

I would like to upload a file for a client and have it expire (lock them out of it) at a prescribed time, say, 2 days after delivery. Any way to put a time limit on a file?

No.
Mylenium

Error in maintenence optimizer while selecting files for download for EHP4

HI,
We are trying to download files for upgrade of ECC (HCM) and Portal systems from EHP3 to EHP4.
This download we are doing through the Solman 7.0. Solman is currently at 7.0 but going to be upgraded soon to EHP1.
Problem is that after we select the files for download of ECC EHP4, in step 2.1 i.e. 'choose stack', the next screen shows error as "Only one EhP release is allowed additionally".
Is this because the Solman is not upgraded to EHP1 yet or soem other reason?
Please let us know.
Thanks for your time.
Thanks & Regards,
Kunal.

..have a look at the How-To Install EHP4 Guide (http://service.sap.com/~sapidb/011000358700000293582009E.PDF)
3.4.2 Only one EHP release is allowed
Issue: You get the error message: u201COnly one EHP release is allowedu201D
Reason: This problem is documented in SAP Note 1139602.
If you get this error message, then you already have installed another SAP enhancement package on this system before (for example SAP enhancement package 3 for SAP ERP 6.0).
The error tells you that you have chosen too few technical usages. If you continued with this selection, you would not update all of the software components to SAP enhancement package 4 that are currently on SAP enhancement package 3. So in the end, some software components would be on SAP enhancement package 3 while others would be on SAP enhancement package 4. That way you would have several SAP enhancement package versions in one system, which is a state that is not supported.
Solution: SAP Solution Manager Maintenance Optimizer requests you to select more technical usages and proposes a list for you to choose from.
If you implement SAP Note 1287216, then Maintenance Optimizer automatically pre-selects the technical usages that are already installed on the system. In the example here, the technical usage Central Applications has been installed on a previous version of SAP enhancement packages.
In rare cases you still get the error after accepting what SAP Solution Manager proposes. The reason for this is that you updated software components without properly covering technical usages.
Hope that helps - best regards,
Christian.

Error in LSMW while specifying file for Material Cassification and Info Rec

Similar Messages

Maybe you are looking for