Error in lsnrctl when starting automatic

Hi,
I'm having problem when i try to start listener by root during
the boot. when i start by Oracle ok, when i try to start the
listener by root, i receive an error: "su - ora805 -c "lsnrctl
start" ....
I tried to run the .bash_profile before start the lsnrctl
command, and the error persist.
Could you help me?
Thanks,
null

Andre Luis Cardoso (guest) wrote:
: Marcio Montenegro (guest) wrote:
: : Andre Luis Cardoso (guest) wrote:
: : : Hi,
: : : I'm having problem when i try to start listener by root
: during
: : : the boot. when i start by Oracle ok, when i try to start
the
: : : listener by root, i receive an error: "su - ora805 -c
: "lsnrctl
: : : start" ....
: : : I tried to run the .bash_profile before start the lsnrctl
: : : command, and the error persist.
: : : Could you help me?
: : : Thanks,
: : Try :
: : . `ora805/.bash_profile in your script
: I have tried this, and it didn't work.
: And the most interesting is that with the svrmgrl it works.
: Do you have any ideia?
Assuming that "ora805" is the owner of oracle. Make sure that
you export the ORACLE_SID equal to your instance and also make
sure you execute ". /usr/local/bin/oraenv" inside the
.bash_profile. Once you have done this, your command would look
like this: "su - ora805 -c '$ORACLE_HOME/bin/lsnrctl start'".
This works under RH5.2. It should also work under RH 6.0.
Good Luck
Javier
null

Similar Messages

'Error 8 occurred when starting the data extraction program'

Hello Experts,
I am trying to pull master data (Full upload) for a attribute. I am getting an error on BW side i.e. 'The error occurred in Service API .'
So I checked in Source system and found that the an IDOC processing failure has occurred. The failure shows 'Error 8 occurred when starting the data extraction program'.
But when I check the extractor through RSA3, it looks fine.
Can someone inform what might be the reason of the failure for IDOC processing and how can this be avoided in future. Because the same problem kept occurring later as well.
Thanks
Regards,
KP

Hi,
Chk the idocs from SM58 of source system are processing fine into ur target system(BI system)...?
Chk thru Sm58 and give all * and target destination as ur BI system and execute and chk any entries pending there?
rgds,
Edited by: Krishna Rao on May 6, 2009 3:22 PM

"Error -42032" message when starting up iTunes 10.2

Immediately after I upgraded my 15" MacBook Pro to iTunes 10.2 a couple of days ago I began getting this error message whenever I started up the program. After dismissing the error message iTunes seems to work fine. It's more of a nuisance than a major problem, but I'd like to resolve it if I can. Any ideas out there?
Regards, Jim
PS - the 10.2 upgrade works fine on my 24" iMac C2 Duo.

Looks like I found the answer to my question.
A colleague on the DealMac forum pointed me to an article at Ars Technica (http://arstechnica.com/civis/viewtopic.php?f=19&t=83766) which suggested that the problem lay in the invisible folder /users/shared/sc info. After making invisible files/folders visible using TinkerTool, I copied this folder to a work file on my desktop, trashed the originals, and then put the copy back. Voila! No more error -42032 message when starting iTunes!
Regards, Jim

Error 16 code when starting up CS5, all I can do is uninstall and reinstall, How to fix this?

Error 16 code when starting up CS5, all I can do is uninstall and reinstall. How to fix this?

Hi Looze,
System information would really help as suggested by Mylenium . I would also recommend going through the below mentioned Kb article to see if that resolves the query.
Configuration error 16 | CC, CS
Cheers,
Kartikay Sharma

An unknown error occured (-42110) when starting iTunes current version.

An unknown error occured (-42110) when starting iTunes current version on PC running Win 8 Pro x86. Tried to uninstall i''Tunes. But erratic behaviour when trying to install iTunes again. Get 2 choices, Repair or Delete. Choose Repair, but after some time I get the question: "Do I want to delete everythin in Itunes" Y/N. No matter if reply Y or N or close window, Installation program is terminated without any alterations (or so it says). What ?????

A repair uninstalls all program files prior to reinstalling them. So the message asking whether or not you want to do that just reflects what has always happened. A repair install (like a standard uninstall, followed by a reinstall) doesn't touch content files under normal circumstances.
If you think the wording is misleading, it's possible to give feedback directly to the Apple folks about it. Here's a link to the product feedback form for iTunes:
http://www.apple.com/feedback/itunesapp.html

"Error 5" message when starting AE App

Dear Community,
I need your HELP, I downloaded AE but when I try to run it, it gives me a "Error 5" message -
I tried installing and reinstalling (with restart of the computer in between) but the error remains...
HELP & Thanks

Looks like I found the answer to my question.
A colleague on the DealMac forum pointed me to an article at Ars Technica (http://arstechnica.com/civis/viewtopic.php?f=19&t=83766) which suggested that the problem lay in the invisible folder /users/shared/sc info. After making invisible files/folders visible using TinkerTool, I copied this folder to a work file on my desktop, trashed the originals, and then put the copy back. Voila! No more error -42032 message when starting iTunes!
Regards, Jim

Error "Subscription Expired" when starting MUSE

I recently installed MUSE CC as part of the ADOBE CREATIVE CLOUD. I have a current membership and are currently working with InDesign CC, Illustrator CC, Photoshop CC and even Dreamweaver CC in the same machine. I used the installer as with any other program but I get the attached error when starting MUSE CC. Again, it does happen only with ADOBE MUSE, I am able to work with any other CC application. Moreover, I installed a trial version of MUSE CC on another computer following the suggestion of a ADOBE Support Rep, and I got the same error. I called again, and the support rep asked me to call on Monday!.
Does anybody knows how to fix this bug? Many thanks in advance
Best regards

Hi,
I already replied:
- Mac OS X 10.9 but I also use a Dell Windows Laptop
- No proxies or firewalls
- I am able to use any other CC app such as Dreamweaver CC, Photoshop CC, Indesign CC, etc.
This is the error log:
Build 329: Mon Dec 2 04:58:48 2013 UTC: Error: CSI: OOBE: Serial Number: Error Code: O-10 Error Message: Unable to retrieve the serial number (Note: this may not be an error)
Build 329: Mon Dec 2 04:58:48 2013 UTC: Error: CSI: OOBE: Serial Number: Error Code: O-10 Error Message: Unable to retrieve the serial number (Note: this may not be an error)
Build 329: Mon Dec 2 05:00:36 2013 UTC: Error: CSI: OOBE: Serial Number: Error Code: O-10 Error Message: Unable to retrieve the serial number (Note: this may not be an error)
Build 329: Mon Dec 2 05:00:36 2013 UTC: Error: CSI: OOBE: Serial Number: Error Code: O-10 Error Message: Unable to retrieve the serial number (Note: this may not be an error)
Build 329: Mon Dec 2 05:00:38 2013 UTC: Error: CSI: OOBE: Serial Number: Error Code: O-10 Error Message: Unable to retrieve the serial number (Note: this may not be an error)
Build 329: Mon Dec 2 05:00:38 2013 UTC: Error: CSI: OOBE: Serial Number: Error Code: O-10 Error Message: Unable to retrieve the serial number (Note: this may not be an error)
Thanks

Error code -10810 when starting up any app

Getting error code -10810 when I click to start any app in the Application folder. Only thing different I did this morning was upgrading coconutBattery. I'm guessing that's the culprit but would like to know what the error code means.

From LSInfo.h in LaunchServices.framework
kLSUnknownErr = -10810 /* Unexpected internal error */
Essentially, Launch Services is hosed. I would suggest blowing away your Launch Services cache.
1) Quit all running apps
2) Go to /Library/Caches
3) Move any file to the trash that has "com.apple.LaunchServices" in its name. (i.e. 'com.apple.LaunchServices-0230.csstore')
4) Go to ~/Library/Preferences
5) Move com.apple.LaunchServices.plist to the Trash
6) Restart
Hope that helps.

AQ publish - DB subscribe: Error ORA-00942 when starting DB Adapter

I am using AQ adapter to publish and DB adapter to subscribe.
When starting the DB adapter i am receiving the following error:
Fri Sep 09 13:22:50 MDT 2005: ** Error: Unknown error while db_bridge_reader_1 was trying to read messages from the database. Please save log files and contact the integration team.
java.sql.SQLException: ORA-00942: table or view does not exist
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:189)
     at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:242)
     at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:554)
     at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1478)
     at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteDescribe(TTC7Protocol.java:677)
     at oracle.jdbc.driver.OracleStatement.doExecuteQuery(OracleStatement.java:2371)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2660)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:457)
     at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:387)
     at oracle.oai.agent.adapter.database.DBMessageReader.getNextMessageHeader(DBMessageReader.java:352)
     at oracle.oai.agent.adapter.database.DBMessageReader.run(DBMessageReader.java:232)
     at java.lang.Thread.run(Thread.java:534)
The table i am inserting into using the DB adapter does exist in the subscribing DB. The only thing i can think of is some table/view is missing within the hub repository itself.
Please help.
Thanks!
-MB

Initially I would try calling the subscribe package standalone in SQL*plus or TOAD just to check its not somekind of config problem...
The subscribing adapter trys calling the subscribing package passing in the message as an oracle data type.
I would write a small pl/sql wrapper that calls you subscribing package outside of the runtime Interconnect environment. If this all works and you can insert data into the table then it maybe something to do with the metadata in the repository and then i'd go along with Ian's suggestion.
But usually if you can successfully use iStudio to edi things then usually the repository is OK.
Also from your log you can see that it has picked up the message and is trying to call the packaged/procedure so it looks like the adapter is working OK.
Cheers Stuart.

Error ORA - 12637 when start Oracle 8i Personnel

I have install oracle 8i personnel to the window 98 notebook. The installation successful without any error. But when I used the oracle8i navigator and click on the local database, error "ORA-12637: Can not attach to Oracle 8i" and "ORA-12637 - Packet Receive Failed"
The same error encountered when I start the database.
Appreciate if any could help on this matter.
Thanks in advance.

Hi
Check weather entries are there in the registry.
Go to the services in the control panel and see if the oracle service has started if not start it. If this is up then the registry is OK. if If not u can create it using the oradim utility.
Then set your oracle_sid = <dbname> in the dos prompt and try connecting again.
Let us see what happense

Error 193: 0xc1 when starting windows service

Hello,
I see there is another related question, however I do not understand what 'dependent services' are and cannot check these.
I am trying to start MySql service and I receive the error
Windows could not start the MySql56 service on the local computer.
Error 193:0xc1
I should also note that when I start windows, I receive this message:
There is a file or folder called "c:\Program" which could cause certain applications to not function correctly. Renaming it to "c:\Program1" would solve this problem
I don't know if these issues are related.
Thank you.

Hello Susie,
Thank you for your reply.
Yes, MySql is running as a windows service. C: has been scanned and threats removed.
This difficulty occurred after trying to reset a forgotten root password after installing MySql for
the first time.
I will continue to try other methods of removing the error, but if you or others have other suggestions
I would appreciate it.
I thought that a system restore/reinstall might work, but it did not.
Thank you again,
Melle

Service-specific error code 997 when starting up Oracle 9i service

Hi,
I have both Oracle 9i and 10g installed in a server. I've added 9i SID in 10g listner.ora. When I try to startup the 9i Oracle service in windows, I get "Windows could not start the 'service name' on Local Computer......If this is a non microsoft service, contact the service vendor, and refer to service-specific error code 997".
Server is Windows 2003 R2 Standard Edition SP1
Does anyone has a solution for this error?
Thanks,
listener.ora in 10g
LISTENER10G =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = sgpdb1)(PORT = 1522))
SID_LIST_LISTENER10G =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = F:\Oracle\Ora10.2.0)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = RACE)
(ORACLE_HOME = F:\Oracle\Ora10.2.0)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = IWK1010)
(ORACLE_HOME = F:\Oracle\Ora9201)
(PROGRAM = extproc)
sqlnet.ora in 10g
NAMES.DEFAULT_DOMAIN = world
SQLNET.AUTHENTICATION_SERVICES= NONE
NAMES.DIRECTORY_PATH= (TNSNAMES,EZCONNECT)
tnsnames.ora in 10g
RACE.WORLD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(Host = sgpdb1)(Port = 1522))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = RACE)
IWK1010.WORLD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = SGPDB1)(PORT = 1522))
(CONNECT_DATA =
(SERVICE_NAME = IWK1010)
)

Here is the resutls. Pls note - startup/exit commands were not executed since did not connenct to sqlplus
C:\Documents and Settings\Administrator>lsnrctl start
LSNRCTL for 32-bit Windows: Version 10.2.0.4.0 - Production on 13-APR-2011 12:03:54
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 10.2.0.4.0 - Production
Log messages written to F:\Oracle\Ora10.2.0\network\log\listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=sgpdb1.corpnet.ifsworld.com)(PORT=1521)))
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.4.0 - Production
Start Date 13-APR-2011 12:03:56
Uptime 0 days 0 hr. 0 min. 4 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Log File F:\Oracle\Ora10.2.0\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=sgpdb1.corpnet.ifsworld.com)(PORT=1521)))
The listener supports no services
The command completed successfully
C:\Documents and Settings\Administrator>sqlplus / as sysdba
SQL*Plus: Release 10.2.0.4.0 - Production on Wed Apr 13 12:05:16 2011
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
ERROR:
ORA-12560: TNS:protocol adapter error
C:\Documents and Settings\Administrator>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.2.0.4.0 - Production on 13-APR-2011 12:09:59
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.4.0 - Production
Start Date 13-APR-2011 12:03:56
Uptime 0 days 0 hr. 6 min. 3 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Log File F:\Oracle\Ora10.2.0\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=sgpdb1.corpnet.ifsworld.com)(PORT=1521)))
Services Summary...
Service "RACE_XPT" has 1 instance(s).
Instance "race", status READY, has 1 handler(s) for this service...
Service "race" has 1 instance(s).
Instance "race", status READY, has 1 handler(s) for this service...
The command completed successfully
C:\Documents and Settings\Administrator>lsnrctl service
LSNRCTL for 32-bit Windows: Version 10.2.0.4.0 - Production on 13-APR-2011 12:10:08
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
Services Summary...
Service "RACE_XPT" has 1 instance(s).
Instance "race", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
Service "race" has 1 instance(s).
Instance "race", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
The command completed successfully

Error in logs when starting server

Hi,
when i am trying to start my app server on sunone. I am getting the following errors in the logs.
CORE1116: Sun ONE Application Server 7.0.0_01
SEVERE: CORE1227: NSS initialization failed: SEC_ERROR_BAD_DATABASE: Problem using certificate or key database: Certificate database: /apps/sunone/sun-appserver7/var/domains/domain1/nicks-8033/config/cert7.db.
Thus any one knows why this error comes. I have installed a SSL certificate on this server. Can it be that this certificate has not been installed properly.
Nikhil

Ok, I finally got it figured out.
I needed the original (to that HTTP Server ) modplsql.dll.
There was no PATH issue.
Once I got the oracle_apache.conf calling plsql.conf and marvel.conf, using the correct DADs, I was all set. I post my solutions to save others some grief.
The original Service Temporarily Unavailable message (Mozilla) was due to the fact that the HTMLDB_PUBLIC_USER account was locked after my upgrade.
Along the way, I ran into an access Forbidden error, which was caused by the incorrect password in the DAD.
Two simple things - unlock the HTMLDB_PUBLIC_USER acount, and of course make sure the DADs are correct.
And as soon as I can I will be contacting Anton to combine all into one HTTP Server -thanks!

Error WSM-02120 when starting Weblogic Server

Hi All,
I have problem while starting weblogic server, I found this error:
WSM-02120 : Unable to
oracle.wsm.policymanager.
PolicyManagerException: WSM-02120 : Unable to
connect to the Oracle WSM Policy Manager due to the following error
"javax.naming.CommunicationEx
ception [Root exception is java.net.ConnectException:
t3://b00wps01:8889,b00wps01:8888: Destination unreachable; nested
exception is:
          java.net.ConnectException: Connection refused; No available router
to destination]".
          at
oracle.wsm.policymanager.BeanFactory.getInitialContext(BeanFactory.java:619)
          at
oracle.wsm.policymanager.BeanFactory.getJndiObj(BeanFactory.java:648)
I have followed this instruction (OWSM Error Message: WSM-02120 ... Connection refused; No available router to destination (Doc ID 1569900.1) from oracle support, and unfortunately it didn't work.
Anyone can help me to solve this issue?

Hi there,
Can you check the JDK version and see the compatible with your weblogic installation ?
You can refer the certification matrix from Oracle to check the compatible version of JDK. Here you go - Oracle Fusion Middleware 12c (12.1.3.0.0) Certification Matrix.
Most probably, this issue will occur when JDK is not compatible with weblogic installation..
Lakshman

Error message seen when starting a managed server (dsp_config.ear)

Hi ,
I am having issues when i start the managed server under the admin server.
Seems like when i undeploy dsp_config.ear the managed server seems to start without any issues.
But since the dsp_config.ear is removed the dspconsole is messed up.
The admin server runs fine without any issues with or without dsp_config.ear deployment.
The error trace
####<Jul 27, 2009 9:36:01 AM EDT> <Warning> <DeploymentService> <wdcsn383a> <cashflow1MS1> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (
self-tuning)'> <<WLS Kernel>> <> <> <1248701761543> <BEA-290064> <Deployment service servlet encountered an Exception while handling the deployment service m
essage for request id "-1" from server "BEAAdminServer". Exception is: "java.lang.ClassNotFoundException: com.bea.wli.config.deployment.server.ServerVersion:
This error could indicate that a component was deployed on a cluster member but not other members of that cluster. Make sure that any component deployed o
n a server that is part of a cluster is also deployed on all other members of that cluster
at weblogic.j2ee.ApplicationManager.loadClass(ApplicationManager.java:218)
at weblogic.j2ee.ApplicationManager.loadClass(ApplicationManager.java:85)
at weblogic.common.internal.WLObjectInputStream.resolveClass(WLObjectInputStream.java:61)
at java.io.ObjectInputStream.readNonProxyDesc(ObjectInputStream.java:1575)
at java.io.ObjectInputStream.readClassDesc(ObjectInputStream.java:1496)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1732)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1329)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:351)
at java.util.HashMap.readObject(HashMap.java:1030)
at sun.reflect.GeneratedMethodAccessor1.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at java.io.ObjectStreamClass.invokeReadObject(ObjectStreamClass.java:974)
at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1849)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1753)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1329)
at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1947)
at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1871)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1753)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1329)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:351)
at weblogic.deploy.service.internal.DomainVersion.readExternal(DomainVersion.java:180)
at java.io.ObjectInputStream.readExternalData(ObjectInputStream.java:1792)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1751)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1329)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:351)
at weblogic.deploy.service.internal.transport.DeploymentServiceMessage.readMessage(DeploymentServiceMessage.java:325)
at weblogic.deploy.service.internal.transport.DeploymentServiceMessage.readExternal(DeploymentServiceMessage.java:301)
at java.io.ObjectInputStream.readExternalData(ObjectInputStream.java:1792)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1751)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1329)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:351)
at weblogic.deploy.service.internal.transport.http.DeploymentServiceServlet.handleDeploymentServiceMessage(DeploymentServiceServlet.java:618)
at weblogic.deploy.service.internal.transport.http.DeploymentServiceServlet.internalDoPost(DeploymentServiceServlet.java:235)
at weblogic.deploy.service.internal.transport.http.DeploymentServiceServlet.access$000(DeploymentServiceServlet.java:77)
at weblogic.deploy.service.internal.transport.http.DeploymentServiceServlet$1.run(DeploymentServiceServlet.java:210)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.deploy.service.internal.transport.http.DeploymentServiceServlet.doPost(DeploymentServiceServlet.java:207)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
Can anybody help me on this one?
it seems more of ODSI issue than weblogic server issue.

it sounds like you are deploying dsp_config.ear to a domain/server that is not ODSI-enabled.
com.bea.wli.config.deployment.server.ServerVersion is in <modules>/com.bea.common.configfwk.wlinterop_10.3.0.0.jar which is referenced by <modules>/features/odsi.server.modules_10.3.0.0.xml and used by com.bea.dsp.management.impl.DomainServiceImpl

Error in lsnrctl when starting automatic

Similar Messages

Maybe you are looking for