Error in mail box work item not executable

HI,
i build simple WF for approve and reject  that send for user to  sap inbox
some decision ,when i check the inbox of the user and double click on the line i get some red triangle in the status Colman  with
error work item not executable,
what can be the problem?
Regards

HI Raj,
i build very simple WF ,
user decision , i put there user  and approve and reject that it.
i execute the WF and go to the SAP user inbox.
in the Work Flow folder i see the task in column executable i see green V work item executable,
status ready  when i double  click on it to open i get  in column executable message work item not executable ,
and status error ,What it can be?
P.S. i check something like that in other system and i don't get the error .
i start the trace SWELS but in SWEL i just see in the log Trace on trace off nothing more .
Best Regards

Similar Messages

  • Error when executing a work item (cannot execute a method, biding problem?)

    Hello,
    I created a specific workflow, triggered by an event, from a class I also created.
    From this event, I get some data about a Document (CV01/02/03N...).
    The first step is a task which refer to a method (from the same class above).
    The binding Task <=> Method is the data about the Document and the Workflow ID.
    After I start the workflow, I execute the work item in SWI1, with a breakpoint in the method.
    I can't go in debug, and the work item is in error (in Workflow log) :
    - "Work item 000000590208: Object ZCL_SA3_WF_GED_RECL_FOURN method UPDATE_FID cannot be executed"
    - "EXECUTE_METHOD_OBJECT_SYNC : Dereferencing of the NULL reference".
    Note: The task is not in background processing, in the aim of debugging the source code.
    I did SWU_OBUF and quit/relog SAP.
    Do you have any ideas to solve this problem ?
    I think it's a biding problem, because I can' t even go in debug mode...
    Thanks.
    Regards
    (sap version: ECC 6.0)

    Hi
    Looking at the error message I feel like there is something wrong in the task object and object method. You are using a class in the task make sure that class has the IF_WORKFLOW. Mak sure the task is enabled with synchronous task method check box.
    Regards
    Pavan

  • Err 62007: SQL Error: 99999 ORA-24338: Statement Handle not Executed

    Hi,
    I am facing a problem while adding a new parameter n my JSP Report JDBC query based on a ref-cursor from a stored procedure define in a package in database.
    No problem at database level, I have added the new parameter in package specification and Package body for that procedure and compile my package, it complies without any error and warning.
    but when I open the report and add parameter in the report JDBC query window, then it is generating a error message,
    "Err 62007: SQL Error: 99999 ORA-24338: Statement Handle not Executed "
    and I am unable to add the new parameter in report.
    e.g.
    Actual which was working is:
    My-package.My-procedure(:P1,:P2,:P3 ,:P4,:P5,:P6,:P7)
    I want to do this:
    My-package.My-procedure(:P1,:P2,:P3 ,:P4,:P5,:P6,:P7,:P8)
    but unable to do due to this error message:
    ("Err 62007: SQL Error: 99999 ORA-24338: Statement Handle not Executed ")
    Reports Builder 10g:
    Database 10g:
    Operating system windows XP:
    using JDBC Query base on ref-cursor coming from the stored procedure define in the Package.
    Regards,
    Khan

    and compile my package, it complies without any error and warning.That doesn't mean anything in this case. You are getting a runtime error, not a compilation error. The error is coming when you execute your procedure.
    Did you test your modified procedure in sqlplus or SQL Developer?

  • How to create distribution list in workflow? for  sending mail or work-item

    Hi,
    How to create distribution list in workflow? for  sending mail or work-item to multiple users.
    Regards,
    Surjith

    Hi Surjith,
    A.Working with Distribution Lists Creating a Distribution List.
    1 Businees Workplace->shared folder - create new subfolder name = WF_distributor
    2.Then click on the distribution list in Businees Workplace.
    say create Name = WF_Vliste
    folder Name = WF_distributor
    3.distribution list content tab
    Enter Recipient (SAP User ID)
    B.Wrkflow Builder
    Find out the dialig step in which u want to use distribution list
    Use workflow Rule 30000012 (SWX_READ_DLI).
    Maintain the binding from workflow container to rule container.
    Just pass the name of the distribution list from WF to Rule container.
    Regards
    Sagar S

  • The work item not coming in SAP inbox ....

    Hi experts,
    I am doing PR realese workflow.It is moved to quality server from development. In quality it is activated and showing no error.When a PR is created  mail is send to approver and the workflow is waiting for his approval. But the work item is not available in his SAP inbox. Even he is getting the remainder mails.But the work item is not available in his business workplace(SBWP).I cross checked user ids of approvers. But still its not working ....the mails are sent to approvers external mail ID.....
    Is there any configurations to make for making the SBWP active ?????
    Pls anyone give me a solution for  this problem...
    Thanks & regards,
    Jayaraj

    Hello,
    The best solution would be to take your mouse, move your cusror to the top part of your screen, and click on the "Before you ask (here are many workflow answers)" thread. If you've tried everything that is proposed there then please reply to this thread explaing what you have tried.
    Cheers,
    P.

  • Can POWL work items be executed from Portal???

    Hi All,
    May any one tell me if POWL work items from any other system (GRC, for example) be executed in Portal?
    As of now, the POWL item is visible in Portal. However, it can not be executed and give below error:
    Not sure how to troubleshoot this and get these POWL items executed from Portal. Any help on this would be a great help!
    Regards,
    Faisal

    Veera,
    Thanks for your reply.
    Yes, the respective application in GRC system can be executed from SE80.
    Not only that, from NWBC, these types of work items can be successfully executed. The problem is that, the can not be executed from Portal.
    Please advise.
    Regards,
    Faisal

  • ERMS : Email work items not getting created

    Hi Forum
    In my test system (CRM 2007), inbound mails were properly coming in and getting distributed to agent's inbox. But after the server restart, I realised that the work items for inbound mails stopped getting created due to which mails are not reaching agent's inbox.
    Mails are visible in SOIN but their associated Work items are not there in SWI1.
    I have checked almost all the settings like Email Distribution (SO28), CRM_ERMS_WF_CUST (Event lining is in place and is active), swu0 (Event simulation is working).... but still not sure why work items are not getting created for inbound mails.
    Any thoughts ? Help will be deeply appreciated.
    Regards
    Vishal Mani

    Thanks Bruno for your time to reply !
    I checked this transaction and in overview there are 19 events with errors. But apart from that everything is green.
    I checked the Linkages with Error tab and realised that the events with errors belong to object type BUS1006.
    In Activation tab --> Linkages --> Object type (ERMSSUPRT2) --> Linkage is activated.
    Infact that is the first thing, I checked when work items were not getting created.
    So no clue from here too.
    Regards
    Vishal Mani

  • Work item not getting displayed in the portal

    Hi  experts,
    We are creating a protoype for one of the standard HCM form for change in working time. When we initiate the process, the workflow is supposed to identify the agent(which is the manager in this case) and push the work item in the inbox of the manager.
    In our issue, we are able to see the workitem in SAP inbox, but the same work item is not getting displayed in the portal.
    If we try to approve from the SAP inbox, the hard coded message u201CWork item can only be executed using the Portal and the UWLu201D comes. [this comes through the method of  one of the tasks 17900101 which we are using for approving the form]
    We commented the message by using a Z class. Now we donu2019t get the hardcoded message, but still the workflow does not complete from here.
    Can this be aan integration issue of the workflow tasks with the portal??Can someone elaborate on this??

    <ItemType name="uwl.task.webflow.TS17900101.SAP_ECC" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchWebDynPro" executionMode="default">
          <ItemTypeCriteria systemId="SAP_ECC" externalType="TS17900101" connector="WebFlowConnector"/>
          <Actions>
            <Action name="launchWebDynPro" groupAction="" handler="SAPWebDynproLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
              <Properties>
                <Property name="WebDynproApplication" value="ApproveFormApp"/>
                <Property name="WebDynproDeployableObject" value="sap.com/pa~asr~formstep"/>
                <Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no"/>
                <Property name="openInNewWindow" value="yes"/>
                <Property name="display_order_priority" value="5"/>
              </Properties>
              <Descriptions default=""/>
            </Action>
          </Actions>
        </ItemType>
    You have to say to your portal team to modify their XML file as above. In simple you hvae to configure the task in the portal and in the SWFVISU txn as follows with the following vizualization parameters
    Task TS17900101 and visualization type is JavaWebDynpro
    APPLICATION     ApproveFormApp
    PACKAGE     sap.com/pa~asr~formstep

  • Validation Error when updating Feature work item to completed state?

    We are on the latest version of TFS 2013 and have customized process templates based off of the Scrum template.
    We have a custom workflow for the Feature work item type. I get an error when trying to update the state to custom done state of "Prod Deployment Successful". The error I receive is below:
    TF237165: Team Foundation could not update the work item because of a validation error on the server etc etc.
    I have TFS Admin rights as well as project and project collection Admin rights.
    Custom States:
    Planned
    Canceled
    On Hold
    In Progress
    Ready For QA
    QA Deployment Failed
    QA Deployment Successful
    Ready For Stage
    Stage Deployment Failed
    Stage Deployment Successful
    Ready For Prod
    Prod Deployment Failed
    Prod Deployment Successful
    Custom Workflow:
    "  "  TO    Planned
    Planned  TO  Canceled
    Planned  TO  On Hold
    Planned   TO  In Progress
    In Progress TO   On Hold
    In Progress TO   Ready For QA
    On Hold  TO  In Progress
    Ready For QA  TO  QA Deployment Failed
    Ready For QA  TO  QA Deployment Successful
    QA Deployment Failed  TO  Ready For QA
    QA Deployment Failed TO   In Progress
    QA Deployment Successful TO   Ready For Stage
    QA Deployment Successful  TO  Ready For Prod
    Ready For Stage TO   Stage Deployment Failed
    Ready For Stage  TO  Stage Deployment Successful
    Stage Deployment Failed TO   Ready For Stage
    Stage Deployment Failed TO   In Progress
    Stage Deployment Successful  TO  Ready For Prod
    Ready For Prod  TO  Prod Deployment Failed
    Ready For Prod  TO  Prod Deployment Successful
    Prod Deployment Failed  TO  Ready For Prod
    Prod Deployment Failed  TO  In Progress
    I have also updated the Process Configuration file to map the states to the meta states so I can show the custom states on the Feature board. The section in the process configuration file that relates to Feature is below:
    <States>
            <State type="Proposed" value="Planned" />
            <State type="InProgress" value="Canceled" />
            <State type="InProgress" value="On Hold" />
            <State type="InProgress" value="In Progress" />
            <State type="InProgress" value="Ready For QA" />
            <State type="InProgress" value="QA Deployment Failed" />
            <State type="InProgress" value="QA Deployment Successful" />
            <State type="InProgress" value="Ready For Stage" />
            <State type="InProgress" value="Stage Deployment Failed" />
            <State type="InProgress" value="Stage Deployment Successful" />
            <State type="InProgress" value="Ready For Prod" />
            <State type="InProgress" value="Prod Deployment Failed" />
            <State type="Complete" value="Prod Deployment Successful" />
          </States>
    The error ONLY happens when I try to update a Feature state to "Prod Deployment Successful". I have looked at other posts and searched the internet and have found no help for my exact issue in TFS 2013. For some
    reason, I can't update the state from "Ready For Prod" to "Prod Deployment Successful".  Does anyone have any ideas of what could be wrong or causing my issue?
    Thanks in advance!

    I finally figured out my issue and fixed it.
    I had to update a reference name in the WIT xml file to Common.BusinessValue instead of Closed.

  • ERMS work items not visible in IC Web Client Agent Inbox

    We have configured ERMS rule modeler with a routing to an organisation unit if email content contains a specific word.
    ERMS seems to work fine as workflow is triggered and work items created in the relevant user SAP inbox (any user assigned to the organisation unit used in ERMS routing.
    When I log into the IC Web client and check for email items in the Agent Inbox, the emails are not visible!!!
    Has anybody faced a similar issue?

    Hi Manoj,
      Have you look at this configuration in SPRO
    ->Agent Inbox ->Setting for Asynchronous Inbound Processing -><b>Define Receving Emails/Fax settings</b> inthis Set Comm.method as <b>INT</b> i.e E-Mail.
    Pls check this config and get back me..
    Regards
    Raju

  • Work items not appearing in NWBC work overview

    Hi,
    I am using NWBC work overview to execute work items (EHSM3.0 - Incident management).
    I have a custom workflow with one custom task (of type Standard). When the workflow gets triggered I can see the work item for my custom task in R/3 inbox (which we access using Tx SBWP). But the same work item is not appearing in NWBC work overview.
    When I replaced my custom task with standard task TS00500003 in the workflow, it did appear in NWBC work overview.
    I added an entry in table IBO_C_WF_TAS for my custom task with following details but it did not resolve my issue.
    Application ID: EHHSS_INBOX
    Task ID: <custom_task_no>
    Default Action: INCIDENTEDIT
    Is there any other setting/config I need to do in order to view work items (for custom tasks) in NWBC work overview?

    Hi,
    This is a job of portal consultant to launch SAP GUI for portal UWL workitems  also similar to SAP SBWP.
    Your portal consultant will be the best guy to answer.
    Regards,
    Ibrahim

  • TFS 2010 Team Web Access Work Items not loading dropdowns and not saving

    Some of our users have lost their ability to add new work items. When they select New -> Bug the WorkItemEdit page opens, but none of the dropdowns load and required fields are no longer highlighted. When they click save it acts like
    it refreshes, but actually nothing is saved and work item numbers are not assigned. No error message is displayed. This also occurs when they try to edit existing work items. We have checked permissions and these have not changed. We have cleared cache
    and rebooted the server and local laptops. Is there anywhere else we can check to see what is going on? Anyone else have this issue before? It seems like we are loosing another person's capabilities every day.

    Thank you for your help. We have SP1 scheduled for install Monday morning. However, we have been running a lot of tests. We are testing mainly in Chrome and IE 9 browsers.
    I was able to get 2 users back up and working. Not sure what fixed them, but I had them log into the server and test there. Accessing the web portal on the server worked for them and when they went back to their laptops their full capabilities
    were working there again. I have since removed their rdp access to the server and the capabilities are still working correctly on their laptops.
    However, I have a 3rd user that I had log into the server and updating and creating new work items did not work for him. This is the error he receives when opening a work item. This user did try testing in Mozilla one day this week.
    Webpage error details
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET4.0C; .NET4.0E; .NET CLR 3.5.30729; .NET CLR 3.0.30729)
    Timestamp: Fri, 6 Feb 2015 14:23:43 UTC
    Message: 'undefined' is null or not an object
    Line: 459
    Char: 9
    Code: 0
    URI: http: //synqtfs2:8080/tfs/web/ScriptResource.axd?d=FYYkafvHmJyg7KmGDtGowHNi60MyDp_sPy-aHe4FCjNjVsni06fZnOIXJiFxZpzcMt92dwoABVR433z1HUUKi-9aLOEO651UC75HFjmS7hvUIPs_HbO_gMhEIFzDLJCRn3-zV0_qstaTszOYGGcLVSqLpmbOMg9VwaYgOa0o__3xszzq_OYpQwOuLyDFEZY_2zbcjg2&t=ffffffffe8aa60f2
    Message: 'this.m_scrollCell.style' is null or not an object
    Line: 513
    Char: 9
    Code: 0
    URI: http://synqtfs2:8080/tfs/web/ScriptResource.axd?d=FYYkafvHmJyg7KmGDtGowHNi60MyDp_sPy-aHe4FCjNjVsni06fZnOIXJiFxZpzcMt92dwoABVR433z1HUUKi-9aLOEO651UC75HFjmS7hvUIPs_HbO_gMhEIFzDLJCRn3-zV0_qstaTszOYGGcLVSqLpmbOMg9VwaYgOa0o__3xszzq_OYpQwOuLyDFEZY_2zbcjg2&t=ffffffffe8aa60f2

  • Temporary errors automatically deletes the work item.

    Hi,
    I have a background workflow task which calls a ABAP class & method. The method raises the temporary exception, cx_bo_action_cancelled when an error occurs. However, when the workflow catches this exception, the corresponding work item (belonging to this task) is marked "logically deleted" and the workflow completes without error. May I know what is wrong, how do I trap this temporary error/exception and not let the workflow completes with the errornous workitem automatically deleted ? Thank you.
    Regards
    Kir Chern

    Hi
    I think because you are capturing the error has exception so its logically deleting. In the task were you are using this method activate other branch ie another outcome. So when ever this error occurs you divert the path in other branch of the task and build your logic.
    Regards
    vijay

  • Work Item Not getting Deleted

    Hi
    We have a starge issue.
    We use the table SWWUSERWI to see all the work items in the user's inbox.
    If we delete the work item in this table it will remove the same from user's inbox.
    We have a problem now. Even after we deleted all the work items the SRM "Approval" link and the "Inbox" still contains Workitems( more than 200 ).
    Is there anyother table or tCode to find the work items in user's inbox'
    Thanks
    Siva.

    HI experts!!
    The issue is solved!!!
    The another user who is not with the company currenlty had maintained the user who had problem as substitue!!!.. we had to remove the substitute to solve the problem.
    Thanks
    Siva.

  • Mail box behaviour is not okay using gmail. All mails in INBOX gets replicated in Trash. This is a recent phenomenon. Not clear where the problem lies - in Gmail or in new OS in MAC.

    I use MAC Mail box for my gmail account. In the last one month or so, my gmail behaviour is erratic.  When I tyrpe mails and send, a spate of intermediate version gets stored as draft in TRASH forcing these to be manually deleted.
    Another new issue: All INBOX Mails appear now in TRASH also.  If I delete, Trash contents, I lost all mail in INBOX also. I re-created my INBOX content from Archive Mail box. Then all mails appear in TRASH folder alaso.
    I am not sure where the problem lies - Is it an issue of Gamil, or new Maverick OS that I use in my MACPRO.  This was never before say one or two months before.
    The situation is distrubing and please advice whether I should reset any configuration.
    Regards
    Venkat

    I removed all mails sitting in Trash this time by using DELETE command; and then again clicked "REBUILD".  Now the Trash is empty.   I hope the problem is resolved for now. Thanks for the tips given instantly. Venkat

Maybe you are looking for