Error in Maintenance Optimizer in step "Select files for component "

Hi everybody,
i would like to download patches for my system. I have defined a solution and now i will start the Maintenance Optimizer procedure to download, but when i press a button "Select Files..." an error "the page cannot be displayed" occurred.
Does anybody know what should i check in my configuration? Where can I find more details for error?
Regards
Bogdan

Hi,
Here is the whole solution for you.
Hope you have implemented the note 990534 properly.
This is what I have done to resolve the same issue -
Apply patch ST-ICO 8 and 9
generate BC set SOLMAN40_MOPZ_TTYP_SLMO_000
generate BC set SOLMAN40_CHARM_PROXYFACT_001
If the error still persist, you will need to work on the below notes. (997780)
Goto SPRO - IMG>SAP SOL MGR>SCENARIO SPECIFIC>CHANGE REQ MGMNT>EXTNDED CONFIG>CHANGE TXN>CONSISTENCY CHECK IN CHANGE REQ MGMNT (define basic settings – SOCM_CHECK_002)
Deselect the 'Integr' field (integration with change management is required) for the checks listed below. The system issues a message stating that changes are not allowed and that the entries are SAP property. This is only a warning message. Choose ENTER to ignore the message and save your changes.
Checks:
           IB_SYST_CHK
           S_USER_CHECK
           REQUEST_IN_PROCESS
           SOLUTION_ASSIGNMENT
           PRODUCT_ASSIGNMENT
           S_USER_CHECK
           EMPTY_CONTAINER
           SYSTEM_STATUS_OK
If you are getting the error "no active ibase" after this, try to implement 1030498.
Hope this helps. If this corrects your issue, please mark the question as answered and award points.
Thanks,
Mehfil Meherali

Similar Messages

  • Error message: "Unable to prepare the selected file for editing"

    There is another similar post. <br /><br />I have imported a bunch of Nikon NEF raw files into Lightroom. I can work them without any problem, but when I right-click the image to edit it further in Photoshop CS3. I get this message:<br /><br />i "Lightroom was unable to prepare the selected file <filename.NEF> for editing. It will not be opened."<br /><br />Photoshop has no trouble opening these NEF files by itself, but Lightroom can't hand it them off. Anyone know why this is? Nothing I can find in the help file or elsewhere here.<br /><br />Stan

    Sean, if they are off-line, would any of this Xmp stuff make any difference? Don't they need to be brought On-lie to edit? And where would the Xmp's go with them off-line?
    Don
    Don Ricklin, MacBook 1.83Ghz Duo 2 Core, Pentax *ist D
    http://donricklin.blogspot.com/

  • Error in maintenence optimizer while selecting files for download for EHP4

    HI,
    We are trying to download files for upgrade of ECC (HCM) and Portal systems from EHP3 to EHP4.
    This download we are doing through the Solman 7.0. Solman is currently at 7.0 but going to be upgraded soon to EHP1.
    Problem is that after we select the files for download of ECC EHP4, in step 2.1 i.e. 'choose stack', the next screen shows error as "Only one EhP release is allowed additionally".
    Is this because the Solman is not upgraded to EHP1 yet or soem other reason?
    Please let us know.
    Thanks for your time.
    Thanks & Regards,
    Kunal.

    ..have a look at the How-To Install EHP4 Guide (http://service.sap.com/~sapidb/011000358700000293582009E.PDF)
    3.4.2 Only one EHP release is allowed
    Issue: You get the error message: u201COnly one EHP release is allowedu201D
    Reason: This problem is documented in SAP Note 1139602.
    If you get this error message, then you already have installed another SAP enhancement package on this system before (for example SAP enhancement package 3 for SAP ERP 6.0).
    The error tells you that you have chosen too few technical usages. If you continued with this selection, you would not update all of the software components to SAP enhancement package 4 that are currently on SAP enhancement package 3. So in the end, some software components would be on SAP enhancement package 3 while others would be on SAP enhancement package 4. That way you would have several SAP enhancement package versions in one system, which is a state that is not supported.
    Solution: SAP Solution Manager Maintenance Optimizer requests you to select more technical usages and proposes a list for you to choose from.
    If you implement SAP Note 1287216, then Maintenance Optimizer automatically pre-selects the technical usages that are already installed on the system. In the example here, the technical usage Central Applications has been installed on a previous version of SAP enhancement packages.
    In rare cases you still get the error after accepting what SAP Solution Manager proposes. The reason for this is that you updated software components without properly covering technical usages.
    Hope that helps - best regards,
    Christian.

  • [SQLSTATE 22001] (Error 8152)Unable to open Step output file.

    Hi,
    I have configured the backups from our SQL Server instance to tape directly with out storing in the local drive, so that the disk space allocated for storing the backups in the local drive is saved. 
    but i end up with the below error.
    Executed as user: CORP\devsqlservice. select       DATABASE_NAME   = db_name(sd.database_id)      from       sys.databases sd      where         -- ONLINE    
      sd.state = 0        and sd.is_read_only = 0      group by sd.database_id      order by 1 [SQLSTATE 01000] (Message 0)  String or binary data would be truncated. [SQLSTATE 22001] (Error 8152)Unable
    to open Step output file.  The step failed.
    I am clueless , why i face this error, Do any one of you face such problems in backup (scheduled backups) job. 
    hemadri

    Hi Hemadribabu,
    >>”string or binary data would be truncated”
    As my research, the error above could occur in the case of passing string or binary data, whose length is larger than received object. So I recommend you to run the Transact-SQL script in SQL Server query window to check if this kind of issue exists, or
    you can post your entire script for further analysis.
    >> “unable to open step output file”
    In addition, as for the error above, this issue can be caused by two reasons below.
    1. The path of the output file is invalid. To fix the issue, please follow the steps below.
        a. Double click on the SQL Agent job.
        b. Switch to Steps tab, and click Edit.
        c. Click Advanced option.
        d. Change the path under Output file or delete the path. For a UNC path, you can 
    map a network drive and use the network drive instead.
    2. Your account doesn’t have access to the folder. Transact-SQL job step runs as the owner of the job step, or as the SQL Server Agent service account. So please check the type of the job step and the account which your job step runs as, and make sure that
    it has access to the folder. For more information about the process, please review the similar thread:
    https://social.msdn.microsoft.com/forums/sqlserver/en-US/7610b484-98b7-42dc-816f-dbc884e84c6d/backup-database-permission-problem   
    Regards,
    Michelle Li

  • Internal Error has occurred. Check the log file for details.

    Hello Experts,
    After installing Oracle 11g R2 in Windows XP (32-bit), I get the following error message when logging into https://localhost:1158/em - "Internal Error has occurred. Check the log file for details." I have extracted the following files onto one directory and used it for installation: win32_11gR2_database_1of2.zip, win32_11gR2_database_2of2.zip, p10098816_112020_WINNT_1of6, p10098816_112020_WINNT_2of6, p10404530_112030_WINNT_1of6, p10404530_112030_WINNT_2of6. I get no errors during the install. I selected "Create and configure a database". I selected "Desktop Class". I took the default locations (in step 5). Can someone please assist me?
    Thank you.

    internal error occur with some java exception?. some tabs are accessed like administration and when you click on performance than you are get logout??
    this is the problem which you are facing??>

  • Encore CS5.5: Error Code 19 Failed to Open MUI File for Time Line when making BR ISO

    Encore CS5.5: Error Code 19 Failed to Open MUI File for Time Line.  What is this and how do I correct it.  This happens whenmaking a Blu ray ISO with Menu or no menu created
    Using: I7 Windows7  machine with Production Premium CS5.5
    I get this wether I create a menu or no menu. I have tried several times with it. I do not know what the error is or how to correct it.
    I encoded with no errors in Premiere.
    I get this jsut after Encore starts to transcode the files.
    Please help,
    Steve

    Go back to http://forums.adobe.com/community/encore and enter
    Error Code 19
    in the area just under Ask a Question
    You may now read all the previous discussions of your error... be sure to click the See More Results at the bottom of the initial, short list if the initial list does not answer your question

  • Can't select files for uploading through Flash Player

    I can only say that this seems to be related to Flash Player, but I'm not 100% sure exactly what the cause of the problem is.
    On most sites that uses a Flash uploader it won't allow me to select files for uploading. When I get to the Select A File dialogue box
    all files are greyed out. This happens in Chrome, Firefox and Safari. I'm using the latest version of Mac OSX. I can't seem to find
    any information about this anywhere on the web.

    Make sure Java and Javascript are both turned on in Safari Preferences/Security.

  • Internal Error has occurred .  Check the log file for details 11g r2 on windows 8 64bit

    Hi Friends,
    I Have just installed on my laptop
    Database : oracle 11g 64bit , on windows 8 64bit
    I was successfully able to install the Database without any problem... I am able to connect from command prompt both as sys and hr user....
    But when I tried to connect through EM by sys credentials...
    https//localhost:1521/em
    I am getting Error Internal Error has occurred .  Check the log file for details....
    When I checked the emoms.trc this the last few lines...
    https://localhost:3938/emd/main:A००००००००३३.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 32 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
    ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
    ORA-06512: at line 1
    2013-09-02 22:22:35,544 [MetadataLoad https://localhost:3938/emd/main:A००००००००३४.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 33 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
    ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
    ORA-06512: at line 1
    2013-09-02 22:22:36,275 [MetadataLoad https://localhost:3938/emd/main:A००००००००३५.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 34 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
    ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
    ORA-06512: at line 1
    2013-09-02 22:22:57,105 [MetadataLoad https://localhost:3938/emd/main:A००००००००३६.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 35 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
    ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
    ORA-06512: at line 1
    2013-09-02 22:22:57,832 [MetadataLoad https://localhost:3938/emd/main:A००००००००३७.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 36 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
    ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
    ORA-06512: at line 1
    2013-09-02 22:22:58,625 [MetadataLoad https://localhost:3938/emd/main:A००००००००३८.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 37 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
    ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
    ORA-06512: at line 1
    2013-09-02 22:23:02,529 [MetadataLoad https://localhost:3938/emd/main:A००००००००३९.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 38 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
    ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
    ORA-06512: at line 1
    2013-09-02 22:23:03,307 [MetadataLoad https://localhost:3938/emd/main:A००००००००४०.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 39 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
    ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
    ORA-06512: at line 1
    2013-09-02 22:23:04,107 [MetadataLoad https://localhost:3938/emd/main:A००००००००४१.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 40 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
    ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
    ORA-06512: at line 1
    Thanks and Regards

    You could try reading what I said: change the port in the URL to 1158.
    My release of windows is this,
    c:\Users\John>ver
    Microsoft Windows [Version 6.2.9200]
    c:\Users\John>
    You can ignore that junk about editions.
    And by the way, there is a problem with your keyboard, it keeps inserting multiple "...." character strings.

  • Error in maintenance optimizer generating Stack File XML

    Hi all,
    In step 3 "Download Files" of maintenance optimizer transaction to implement the EHP5 of ERP, In the tab "Log" I see the following error.
    *Collecting XML adjustment input data done with error or warning.
    Message no.AGS_MOPZ_PLAN_MSG144*
    The stack XML file is very very important to the ehpi installer, then I need to know which implications have the error below...
    I create 3 Maintenance Optimizer transactions, and in all of them, the error appears.
    Thanks  a lot.

    Hello,
    Please check if the SPAM level of the Solution Manager is the latest.
    If this does not help, please check the details about the error message in transaction SLG1 (this transaction is the full application log). There should be extra text / error message explaining the situation, you only have to look for the error around the time when you got the 'Collecting XML adjustment input data done with error or warning' message.
    Best regards,
    Miguel Ariñ

  • Maintenance optimizer configuration Steps

    Dear All,
    I am stuck with Maintenance optimizer configuration.
    Can somone provide a usefull link for the same i am using SOLMAN 4.0 with SP 15.
    Best of regards,
    Gaurav Sood

    Hi ,
    Here are the steps :-
    MAITENANCE OPTIMIZER STEPS
    1) Create the system in solution manager (Tr.code-SMSY)
    2) For this System to create the rfc destinations.
    3) Create the logical component for system.
    4) Maintain technical settings of OSS in the transaction code: OSS1
    5) In TR code AISUSER maintain the user and OSS id
    6) In DSWP transaction codeu2014in settings-global settings have to maintain OSS id and Password.
    7)go to tr code DSWPu2014changemanagementu2014support packagesu2014click on maintenance optimizeru2014select the systemu2014continue-confirm files in download basketu2014complete transaction.
    Thanks
    Abullais

  • Maintenance Optimizer, approval step of download basket

    Hello!
    Im trying to download an update for our portal from the SAP web site, using download manager. But i can't get the file in download because this one has to be approve. I ve seen that this is done in Solution manager, but i can't find how to do it.Does someone know the step to solve this probleme?
    Thanks & Regards
    Chris

    Hi,
    Have you setup maintenance optimizer?
    The first Pre-requisite to setup maintenance optimizer is
    SOLMAN to be
    SP10
    Also check these
    [Tutor|https://websmp201.sap-ag.de/~sapidb/011000358700006477102006E.sim]
    [Note|https://websmp201.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1024932&_NLANG=E]
    This will solve your problem.
    Feel free to revert back.
    --Ragu

  • AISUSER not assigned - Giving error during Maintenance Optimizer

    Hi Tech Masters,
    I am trying to set up Maintenance Optimizer on Solution Manager 7.0 SP15 ( WIndows 2003).
    I am using wizard to do this. But I am getting error when I am trying to update "Assign S-User for SAP Support Portal functionality" ( Basically the AISUSER Tcode does ) :
    When I am entering new entries, Its allowing me to enter User , SAP Customer No, but whenver I am trying to input Contact Person Its giving me the following error :
    "Partner number 0000000000 was not found in table AICONTACTS."
    Please help me out.
    Thanks
    Rabi Pal

    Are you sure that you are entering the correct Customer Number and the corresponding S-userid is correct ?
    May be this problem is related with several customer number administration ? check these notes
    Note 1151450 - FAQ: Managing several customer numbers - Support Package 15
    Note 1082010 - Administration of several customer numbers

  • Maintenance Optimizer config step-by-step

    Hi All,
    I am not a SAP Basis Person,I install Solution Manager 4.0.
    Now i want to configure it for SAP Service Pack downlod purpose.
    Can any one help me in this regard in simplest way to configure Maintenance Optimizer.
    Regds
    Gyan

    Hi Gyan,
    when setting up the Maintenance Optimizer, you will have to carry out the basic configuration steps from the Implementation Guide of your Solution Manager system (transaction SPRO):
    SAP Solution Manager
    - Basic Settings
    -- SAP Solution Manager System
    Follow the instructions step by step! Another important point from the Implementation Guide can be found under:
    SAP Solution Manager
    - SAP Solution Manager System
    -- Activate Integration with Change Request Management
    Furthermore check, if all necessary BC-Sets have been activated (Transaction SCPR20), these BC-Sets are as follows:
    SOLMAN40_SDESK_BASICFUNC_000
    SOLMAN40_CHARM_BASICFUNC_001
    SOLMAN40_MOPZ_TTYP_SLMO
    Make sure to have the table AISUSER maintained as described in the IMG, and check if the destination SAP-OSS (transaction SM59) is having the right settings.
    Do not forget to assign a Logical Component to your Solution Landscape in the transaction SMSY.
    Please check also note no. 990534.
    Further information on the Maintenance Optimizer you will find under http://service.sap.com/solman-mopz
    In case of any problems, just ask me again!
    Regards
    Csaba

  • LR 3.3 "unable to prepare the selected file" for plugin

    OK - using LR 3.3 and trying to edit an image in an external plugin and getting this error message:
    Lightroom was unable to prepare the selected file at [file name] for editing.
    It will not be opened.
    1) Image can still be adjusted and printed in Lightroom
    2) FIle name and path are correct
    Possible source of problem:
    3) Last week I renamed the volume and had to go through all my directories and find missing files. I did that.
    4) I've also optimized the catalog hoping it would restore things, but nope.
    5) I can edit other files found on this volume (an internal hard drive) and same top-level directory with this plugin.
    H*E*L*P

    Resolved. File permissions had somehow been set to read-only. Now if only I could figure out why that happened...

  • Error Msg - "You must add the Class files for this enterprise bean"

    Hi,
    I am creating creating new enterprise bean using j2sdkee1.2. I am able to create .ear file in desired folder, but can not create .jar. Please help. Getting above error message.
    remote, home interface files and file having business logic (EJB) is compiled and kept at desired location.
    j2ee server started, Deploytool is started.
    Then I can successfully create new application (.ear file)
    Then I go for creating new enterprise bean. I get same application name in Drop down list named "Enterprise Bean will go in".
    Then I can add home, remote and ejb class file to create jar ("Add" under "Contents" ).
    When I say ok after adding these 3 files, I am getting error - "You must add the Class files for this enterprise bean".
    In the deploytool console, getting error - "java.io.FileNotFoundException: C:\2sdkee1.2\mahesh\ConverterEJB.class (The system cannot find the path specified) "
    Can you please help me where to configure the path?
    Can u please help?
    Please send your answer to - [email protected]
    Cheers!

    the path really begins with '2', without a 'j', ie not c:\j2sdkee1.2\...?
    "java.io.FileNotFoundException:
    C:\2sdkee1.2\mahesh\ConverterEJB.class (The system
    cannot find the path specified) "

Maybe you are looking for