Error in Making Maintainenace Table

hi i am getting the following error while making the maintanace table for my Z Table.
<i>In DYNPFIELD_ATTR field LENGTH has the invalid value 250</i>
help me its urgent.
abhishek suppal

Hi abhishek ,
i think maximal length of a dynpro field is 132
(-> message SV 626)
Andreas

Similar Messages

Error while dropping a table

Hi All,
i got an error while dropping a table which is
ORA-00600: internal error code, arguments: [kghstack_free1], [kntgmvm: collst], [], [], [], [], [], [], [], [], [], []
i know learnt that -600 error is related to dba. now how to proceed.
thanks and regards,
sri ram.

00600 errors should be raised as service request with Oracle as it implies some internal bug.
You can search oracle support first to see if anyone has had the same class of 00600 error, and then if not (and therefore no patch) raise your issue with Oracle.
http://support.oracle.com

Error when creating a Table...

Hi,
I'm getting an error as follows .
create table asgnd_agent_bak as (Select * from ASGND_AGENT a, SCN s
where
a.CNTCT_KEY = s.CNTCT_KEY and a.SCN_NUM=s.SCN_NUM
and a.ACTVTY_DT = to_date('03/17/2013','mm/dd/yyyy')
and s.SCN_OPEN_DT = to_date('03/15/2013','mm/dd/yyyy')
and a.SRC_SYS_DESC = 'FACET');
create table asgnd_agent_bak as (Select * from ASGND_AGENT a, SCN s
ERROR at line 1:
ORA-00957: duplicate column name
Please advise
Regards,
Narayan

Fixed the issue

Error messages in a table

Hi everyone,
I have a problem when displaying error messages in a table (with values, not based on a model)
In a column I have an inputText and a validation that checks valuechangelistener. If not true, throw an error message for that component.
facesContext.addMessage (client, message);
The table is a DropTarget so each time dragging the dragsource to the table renders the table and missed the error message.
I had thought to save the id of the components in a list and the dragDropEndListener force to be redisplayed.
The problem is that the IDs of the components varies each time the table is rendered so even save the id of the components is worthless because they are not the same.
Anybody can help me?How I can re-display the errors of the components?
I can not use validator instead of valuechangelistener

I am not sure if you want something like highlighting the components which have errors -
If yes , then try this code bit
public void addMessage(UIComponent component, FacesMessage.Severity type,
String message) {
FacesContext fctx = FacesContext.getCurrentInstance();
FacesMessage fm = new FacesMessage(type, message, null);
fctx.addMessage(component.getClientId(fctx), fm);
You can call the method like this addMessage(this.componentName,FacesMessage.SEVERITY_ERROR,ErroMessage)
-Sudipto

Error while loading AS400 table

Posted: 14 May 2014 08:11
Post subject: Error while loading AS400 table
Hi,
I was trying to load an AS400 table using a flat file as source. The table and flat file has a single field only. I'm getting the error "<SQLExecute>: <[IBM][System i Access ODBC Driver]Error in assignment.>"
The screenshot of the full error message is attached. can someone please help me to resolve this.
Thanks,
david

Posted: 14 May 2014 08:11
Post subject: Error while loading AS400 table
Hi,
I was trying to load an AS400 table using a flat file as source. The table and flat file has a single field only. I'm getting the error "<SQLExecute>: <[IBM][System i Access ODBC Driver]Error in assignment.>"
The screenshot of the full error message is attached. can someone please help me to resolve this.
Thanks,
david

Error while altering a table.

Hi All,
When i tried to alter a table. I got the following error.
SQL> ALTER TABLE SALES_ORDER_TRANS_IHST ADD(SUPER VARCHAR2(1),REASON_CD VARCHAR2(10));
ERROR at line 1:
ORA-00069: cannot acquire lock -- table locks disabled for SALES_ORDER_TRANS_IHST
Then I tried to enable table lock for that table. Again got error.
SQL> ALTER TABLE SALES_ORDER_TRANS_IHST enable table lock;
ALTER TABLE SALES_ORDER_TRANS_IHST enable table lock
ERROR at line 1:
ORA-00054: resource busy and acquire with NOWAIT specified

ORA-00054: resource busy and acquire with NOWAIT specified The table is currently in use by something else.
Werner

Error in updating to table WRPT

Hi All,
I am trying to update lenght, width and height for Material .
After i save the article and go back "It gives Express Document " which doesnot save the changes ..
When i checked SM31 it gives error" Error in updating to table WRPT"
Regards
Vikrant M Kelkar

Still not sorted

Error in updating OBNK Table ( Bank Statements and Reconciliations,Manual)

PLease advise ,
Bank Statements and Reconciliations,Manual Reconciliation
Client is receiving the following message:
Error in updating OBNK Table
Edited by: Philip Eller on May 20, 2008 9:03 AM

Hi Darpal Thiarha,
Please kindly refer to note 1132591 and note 1128677 to see if these are relevant to this issue. Upgrading to 2007A PL15 or above may avoid such issues relevant with the error 'Error in updating OBNK Table'.
Regards,
Candice Ren
SAP Business One Forums Team

Error in updating condition table 372

Hello,
While saving Excise Invoice I am facing error 'Error in updating condition table 372'.Could you please solve this probelm?
Thanks in Advance

Dear All,
I done this--by doing some configuration changes.
Normally while doing Exports we are tempted to use the same sales area and accordingly we may give the combination of excise grp+series grp+export type in IMG>>>Logistics General>>>India>>>Business transactions>>>Outgoing excise invoices>>>Maintain default excise groups and series groups.
Once after removing the export type to your sales area combination--system will show this error--and we cannot even post the Excise invoices.(J1IIN)
I tried in my IDES--that with export type(Ex.Export under Bond)--with this assignment--i am able to post my excise invoices.
Once after removing this assignment of export type--again i am getting this error.
Actually i am not even aware why it is happening--almost after two months of struggle--i find this.
(i feel it is in the same way that we cannot even open/See a sales order by deleting sales group which was created&used previously)
i am sharing this because somebody may get a little help with my thread.
Mark this if helpful--there by others can easily find this thread.
Phanikumar

NQS ERROR:14025 NO FACT TABLE EXISTS -after migrating from 10g to 11g

NQS ERROR:14025 NO FACT TABLE EXISTS AT THE REQUESTED LEVEL OF DETAIL in all the reports after migrating from 10g to 11g ...
then we applied the patch (One-off Patch for Bug: 11850704) for the error <<NQS ERROR:14025 NO FACT TABLE EXISTS AT THE REQUESTED LEVEL OF DETAIL>>
But after applying the above the above patch we are still getting the same error.
but in the above patch instructions file - Post deployment instructions to create the Variable
Post Install Instructions:
- To revert to the 10g navigator behavior for handling conforming dimensions,
you must set the following session variable via an init block in the RPD:
NO_FORCE_TO_DETAIL_BIN=1
The default value for the above variable is 0.
- Restart all servers (Admin Server and all Managed Server(s))
but we didn’t find the process to create the specified variable and Initialization block in the RPD
Can you please suggest us how to go further.
Our questions are:

Hi
Refer the below thread.
obiee 11g non-conforming dimensions and nQSError 14025
Might be help you/
Thanks,
satya

Fetching SSIS error message into Audit table using SP

Hi Experts,
I want to fetch SSIS Error Info along with Task Name into Audit table 'Error_Info' column. This is nvarchar(max) datatype, i wrote below Stored Procedure for this (Column names passing dynamically in SP)
CREATE PROC [dbo].[usp_AuditErrorHandler]
@AuditTableName nvarchar(MAX)
,@Audit_Status nvarchar(100)
,@Audit_ErrorDescription sql_variant
,@Audit_PkgEnd_dttm nvarchar(100)
,@task sql_variant
,@errordescription sql_variant
,@Audit_ID nvarchar(10)
,@LogID INT
AS
BEGIN
DECLARE @STRQuery NVARCHAR(MAX)
SET @STRQuery = '
UPDATE '+@AuditTableName+'
SET '+@Audit_Status+' = ''Failed''
,'+@Audit_PkgEnd_dttm+' = GETDATE()
,'+@Audit_ErrorDescription+' = ''Task['+ @task +']:'+@errordescription +'''
WHERE ' +@Audit_ID+ ' = ' + CAST(@LogID AS NVARCHAR)
The above procedure is working fine in SSMS and inserting complete error info into table, but when i am executing thru SSIS Pkg i am getting error like
"[Execute SQL Task] Error: Executing the query "exec usp_AuditErrorHandler ?,?,?,?,?,?,?,?" failed with the following error: "Incorrect syntax near '@P1'.". Possible failure reasons: Problems with the query, "ResultSet"
property not set correctly, parameters not set correctly, or connection not established correctly."
So, i tot of checking with string lenght and modifed the code by adding left () to @errordescription as below.
UPDATE '+@AuditTableName+'
SET '+@Audit_Status+' = ''Failed''
,'+@Audit_PkgEnd_dttm+' = GETDATE()
,'+@Audit_ErrorDescription+' = ''Task['+ @task +']:'+LEFT(@errordescription ,100)+'''
WHERE ' +@Audit_ID+ ' = ' + CAST(@LogID AS NVARCHAR)
Here, it is inserting till 119 chars, if i give more than 119 chars pkg is failing with above error.
I want to get insert Complete error info into the column.
Can anybody suggest on this??
Thanks in advance !!!

Thanks Arthur for the response, i have tried with the Sql_Variant data type also, here procedure itself not creating and throwing below error.
"The data types nvarchar(max) and sql_variant are incompatible in the add operator."
This is the procedure i am using to fetch error info into Audit table.
ALTER PROC [dbo].[usp_AuditErrorHandler]
@AuditTableName nvarchar(MAX)
,@Audit_Status nvarchar(100)
,@Audit_PkgEnd_dttm nvarchar(100)
,@Audit_Task_ErrorCode nvarchar(100)
,@Audit_ErrorDescription SQL_VARIANT
,@errorcode nvarchar(max)
,@task SQL_VARIANT
,@errordescription SQL_VARIANT
,@Audit_ID nvarchar(10)
,@LogID INT
AS
BEGIN
SET NOCOUNT ON;
DECLARE @STRQuery SQL_VARIANT
BEGIN TRY
SET @STRQuery = '
UPDATE '+@AuditTableName+'
SET '+@Audit_Status+' = ''Failed''
,'+@Audit_PkgEnd_dttm+' = GETDATE()
,'+@Audit_Task_ErrorCode+' = '''+@errorcode+'''
,'+@Audit_ErrorDescription+' = ''Task['+ @task +']:'+ @errordescription +'''
(Error is giving in this line)
WHERE ' +@Audit_ID+ ' = ' + CAST(@LogID AS NVARCHAR)
EXEC (@STRQuery)
END TRY
Below is the Audit Table Schema

Error "No entry in table T589A for P" while creating new Infotype

HI,
I've created a new infotype (9605). All the tables, structures, screens etc. have been created using transaction PM01 successfully. But upon execution of Infotype from PA30, the infotype screen is displayed with the following error:
"No entry in table T589A for P"
Any input will be highly appreciated.
Thank you,
Farooq.

Hi Farooq,
Untill and unless the the field PSYST-IOPER is cleared explicitly in the program MP960500 (in PBO modules), this error should not occur.
Also is this error is coming only for 9605 infotype ? Also is any other info availaible in the error message such as entry in table t589a is not available for which value of OPERA (INS, MOD, DEL, LIS etc) ?
Regards,
Shrinivas

Error "No entry in table T551A" while creating set work schedule rule.

Dear Team,
I am getting following error while creating set work schedule rule.
Error "No entry in table T551A" for key 22 BBB [ here BBBB is my period work schedule]
The actual prob is i configured all the necessary steps but when i tried to create work schedule rule im getting this error. Also, in the same screen there is one field DWS grouping initially value in this is 00 and gread mode. But after giving ES grp, holiday calander ID etc etc when i try to save that screen that value is chainging to 22 from 00.
My ES grop=2 and PS grop=2 . Is that value is my ES and PS grouping..?? or some other thing.
Request you to please help me out.
Regards
Shab.

HI, there are 8 steps you need to do below:
1. Group Personnel Subareas for the Daily Work Schedule
2. Group Personnel Subareas for the Work Schedule
3. Define Break Schedules
4. Define Daily Work Schedules
5. Define Period Work Schedules
6. Define Employee Subgroup Groupings
7. Define Groupings for the Public Holiday Calendar
8. Set Work Schedule Rules and Work Schedules
All of them belong to TIME MANAGEMENT. I think you miss some steps above.
Please check it again.
Regards!
Minh

Error when making a call to SAP using SaveData

Hi,
Iam getting the following error while making a function call to SAP
T:5392 *>RfcInstallStrucure2: field 1 (SIZE_DIM, t:0, l:1) offset 16 too small
Can somebody please explain me what's going wrong.
Thanks & Regards,
Sudha

Hi Sudha,
WELCOME TO SDN FORUMS!!!
It's a RFC Error. I think there is a problem with the length of the parameter you are passing to the RFC.
1. Please check the parameters that your are passing to your rfc.
2. I mean the datatype and length of the parameter that you are passing.
3. Instead of passing the parameters from the .net application to the RFC, test the RFC from the SAP GUI
with the input that you are going to pass from the .net application.
Hope it helps.
Regards,
Maheswaran.B
In order to keep the quality of the forum posts high and to involve more people in the process, SDN has
introduced some mechanism to reward points. In case your problem is solved, don't forget to do this otherwise you
might not get much help in the future anymore.
Message was edited by: Maheswaran B

Scheduling error causing - ORA-00942: table or view does not exist

Hello
I have the following problem, I created an scenario that its supposed to run every 1 hour, it has an interface that moves an amount of records from one table to another (the amount of records is not fixed it changes). The problem arises when the amount of data to move is so big that the hour between executions is not enough and the scenario is still running when a second execution of the same scenario starts to run (as scheduled), so in the interface when the second process is trying to run the loading step it fails and I got the error ODI-1228 Caused By: java.sql.BatchUpdateException: ORA-00942: table or view does not exists. So the scenario fails and it logs this error. I think the error is due to the table in stage being locked by the first execution of the scenario.
I don't want to change the amount of time between executions because it is usually enough, I just want to avoid the execution of a scenario when there is another execution of the same scenario still running, is there any way to do this?.
Thanks
LJ

Hello
Thanks for your answer, I already have the "Interval between repetitions" property set to 1 hour, but when one execution takes more than one hour the scheduler starts another and I have 2 processes accessing the same table and it is when I have a concurrence error on the staging table.
How can I ensure that I wont have two or more executions of the same scenario running at the same time?.
Thanks,
LJ

Error in Making Maintainenace Table

Similar Messages

Maybe you are looking for