Error in Manual Accrual Object
Hi,
I want to know about Manual Accruals in FI?
When i am creating Accrual Object in Tcode - ACACTREE01, and entered the data and while checking it shows error
<b>No standard accrual method exists for accrual type RVNUES</b>
Msg no. ACE021
Pls solution
Rgds
sunfico
Hi
Try FBS1 transcation for manual accrual.
Thanks
Ashok
Assign poits for useful answer
Similar Messages
-
Error creating accrual object in Mannual Accrual
Hello Gurus,
I am trying to create Accrual Object in Manual Accruals. After entering all the required data i entered "Check and Simulate " tab and i am getting the error message as follows:
*Error in document: ACE $2 D6B510PCC*
*Message no. RW609*
*Diagnosis*
*Errors occurred when checking or posting the document*
*Reference type = ACE*
*Reference key = $2*
*Logical system = D6B510PCC*
*You can find the errors in the log.*
*System Response*
*The document cannot be posted.*
*Procedure*
*Remove the error in the document and create and post the document again.*
I am not able to depict what the error is. I have looked at the customizing, it looks fine to me..but i guess i am missing something. Can somebody helps me with this. Any assistance is rewarded,
Thanks
PrakashHello,
I'm with same problem.
The message occurs only for objects created last year and before, when trying to post this year.
Thanks -
Rebate Agreement manual accruals not updating in agreement
Hello,
I am configuring extended rebate agreements and am working with the MANUAL ACCRUAL functionality.
I can create a manual accrual from the agreement and sales order type B4 is created and billed as type B4. I can see the impact correctly to the G/L and provisional accounts. When i go back to the agreement in VBO2, I DO NOT see any error messages saying the agreement is not up to date, but i also don't see the accrual increase under the Sales Volume or Verification views.
I only see billing document that came through regular customer invoices where i accrued. If i look under Rebate Payments menu ---> Rebate Documents, i see the manual accrual documents. My question is...if i accrued 500$ through regular invoicing...and then we do a manual accrual for addition 200$, where do i see a total accrual of 700$? All i seeunder verification is the original 500$? Is this just standard behavior?
Note: i've checked agreement config and manual accruals are checked on...info structures set to "1 Syncronous Updating" and agreement is up to date per VBOF.
RegardsHi Neeraj,
When you post manual accruals via a billing document which is posted in FI, the table S060 will be updated with the amount for the condition record (field S060-RUWRT) this field holds a total value of accruals this can include manual accruals, postings form relevant billing document lines and accruals that were reversed via a partial payment. When the final settlement is carried out all of these are calculated and the accruals condition in the final settlement will reverse completely all accruals related to an agreement at that time.
However, Rebate payments have to be made to a customer based on REAL sales volumes. If there is no sales volume then no payment would be due.
Regards,
Raghavendra -
When I create a new accrual object and save it, it raises an error: "No number range exists for Company Code 1001 Number Range Object 01" although I have assigned a number range for accrual object. Do you know how to solve this error ?
Thank you very much.
Sylvecat.Dear Mayank Agrawal,
Yes, I have checked it again. I've already assigned a number range from 000001 to 999999 to accrual objects. But it always raises this error.
Best regards,
Sylvecat -
Manual Accruals Functionality FI
Hi,
Does anybody know how to customize the Manual Accruals Functionality in FI? I only have the information that is provided in help.sap.com and it is not too much. I cannot activate this functionality in the menu either.
I will appreciate any help (user guides, customization guides...) of this functionality
Thanks very much in advance
RafaSee here for configuration guide:
http://help.sap.com/bp_bblibrary/600/documentation/N73_BB_ConfigGuide_EN_DE.doc
Page 25 onwards:
3.4 Manual Accruals 25
3.4.1 Assign Company Code 25
3.4.2 Define Accounting Principles 26
3.4.3 Assign Accounting Principle to Company Code 27
3.4.4 Define Accrual Types 28
3.4.5 Define Permitted Company Codes and Fiscal Years 28
3.4.6 Define Accrual Object Categories 29
3.4.7 Define Number Ranges for Accrual Objects 30
3.4.8 Define Customer Settings for Components 31
3.4.9 Specify Standard Settings for Accrual Calculation 31
3.4.10 Define Posting Control 32
3.4.11 Define Number Ranges for Periodic Posting Runs 33
3.4.12 Define Number for Application Log 34
3.4.13 Define Number Ranges for Accrual Engine Documents 34
3.4.14 Define Number Ranges for Assigning ACC Doc. to ACE Doc. 35
3.4.15 Define Combination of Characteristics 36
3.4.16 Define Set of Rules 36
3.4.17 Define Values for Set of Rules 38 -
have several ringtones in my itune. while synchronising 2 errors appear.1. several objects could not be found,2. an iphone was found but could not be indentified. iph.4s was new reset, ios 6
Hi Grant,
Here is what I did and so far seems it is wworking.
1. I deleted oDesk and ShareFile. I removed them using MacKeeper (I found this application very usefull for uninstalling applications as MacKeeper looks for them all over the computer: cache, preferences, application support etc.) While for oDesk is simple as I can look myself for oDesk in any file names, whith ShareFile was a little tricky to amke it amnually as MacKeeper find files that contain Citrix name then ShareFile. I will not guess unless I would search the internet on how to manually remove sharefile from my system.
2. I manually delete all cahe files and folders from ~Library and ~User/Library.
3. After reboot I installed Onyx and order maintanance where I checked all its options, including but not limited to DNS caches, fonts caches, everything.
4. After I reboot computer, I went in Disk Utility and Repaired permissions.
Reboot again. Now seems to work fine. At least odesk Team is working properly. I will have a second thought for installing ShareFile.
Some romanian mac users suggested to check my router connectivity and change some DNS in it. Looks like that was also a problem on some MACs. I recall the few weeks ago I had an issue with TP Link router. My computer wasn't connected to internet, though router showed that there is internet connection. I ping router from my computer and I received answer from ping. I ping google from computer, nothing. I ping google from router, was wroking. I connected the computer directly to internet without router, was wroking. When connected back through router, nothing. I contacted the guys from TP Link and they suggested to use google DNS instead of those my ISP provided. But since then I had not experienced any issue with router and internet, until now. The DNS are still those from google.
I will keep you updated if any issues are appear again. So far, it is working perfectly as it supposed to work.
Warm regards,
Sebastian -
Error while creating info object
error while creating info object a character
Info object may be a maximum of 000060 digits...... what would be the error?
Thanks ALLHi,
The maximum length supported by one CHAR type infoobject is 60. Check whether you have assigned more.
If you have to load more length ( more than 60) split the total thing into different infoobjects. Create different infoobjects and split the total thing into them - like 1st 60 char in 1st infoobject, char 61-120 in 2nd infoobject and so on. Then you can again concatenate them.
Thanks,
Indrashis -
Error in creation of Object Type from XML passed
Hi,
I am facing a problem creating a appropriate a object type for a XML.
Below are the details:
XML Passed
<mer_offer_action_data>
<form_id>
134039588
</form_id>
<action_cd>
OA
</action_cd>
<offer_decline_reason_cd>
</offer_decline_reason_cd>
<start_dt>
</start_dt>
<candidate>
<ds_prs_id>
109315
</ds_prs_id>
<ds_prs_id>
110534
</ds_prs_id>
<ds_prs_id>
110059
</ds_prs_id>
</candidate>
</mer_offer_action_data>
Types Declaration
+CREATE OR REPLACE type MER_OFF_CANDIDATE
AS
OBJECT
DS_PRS_ID NUMBER
CREATE OR REPLACE TYPE MER_OFF_CANDIDATE_t
AS
TABLE OF MER_OFF_CANDIDATE;
CREATE OR REPLACE type MER_OFFER_ACT_DATA
AS
OBJECT
FORM_ID NUMBER,
ACTION_CD VARCHAR2(6),
OFFER_DECLINE_REASON_CD VARCHAR2(6),
START_DT VARCHAR2(11),
CANDIDATE MER_OFF_CANDIDATE_t
CREATE OR REPLACE TYPE MER_OFFER_ACT_DATA_t
AS
TABLE OF MER_OFFER_ACT_DATA;
CREATE OR REPLACE type MER_OFFER_ACTION_DATA
AS
OBJECT
MER_OFF_ACT_DATA MER_OFFER_ACT_DATA_t
/+
My Declaration
+merOffActDataXML xmltype;
merOffActData MER_OFFER_ACTION_DATA := MER_OFFER_ACTION_DATA(MER_OFFER_ACT_DATA_t());+
Inside Pl/SQL block
+-- Converts XML data into user defined type for further processing of data
xmltype.toobject(merOffActDataXML,merOffActData);+
when I run the Pl/Sql block it gives me error
ORA-19031: XML element or attribute FORM_ID does not match any in type ORADBA.MER_OFFER_ACTION_DATA
which means the object type mapping is wrong
I would like to know whether the object type I had created is correct or not.
Thanks for your help
BedaBedabrata Patel wrote:
Below are the details:The details except for a description of the problem
I am facing a problem creating a appropriate a object type for a XML.And which error you are getting
Error in creation of Object Type http://download.oracle.com/docs/cd/E11882_01/server.112/e10880/toc.htm
And which version of Oracle you are getting the unknown error creating the unknown problem. -
Error in creation of Object Type
Hi,
I am facing a problem creating a appropriate a object type for a XML.
Below are the details:
XML Passed
<mer_offer_action_data>
<form_id>
134039588
</form_id>
<action_cd>
OA
</action_cd>
<offer_decline_reason_cd>
</offer_decline_reason_cd>
<start_dt>
</start_dt>
<candidate>
<ds_prs_id>
109315
</ds_prs_id>
<ds_prs_id>
110534
</ds_prs_id>
<ds_prs_id>
110059
</ds_prs_id>
</candidate>
</mer_offer_action_data>
Types Declaration
+CREATE OR REPLACE type MER_OFF_CANDIDATE
AS
OBJECT
DS_PRS_ID NUMBER
CREATE OR REPLACE TYPE MER_OFF_CANDIDATE_t
AS
TABLE OF MER_OFF_CANDIDATE;
CREATE OR REPLACE type MER_OFFER_ACT_DATA
AS
OBJECT
FORM_ID NUMBER,
ACTION_CD VARCHAR2(6),
OFFER_DECLINE_REASON_CD VARCHAR2(6),
START_DT VARCHAR2(11),
CANDIDATE MER_OFF_CANDIDATE_t
CREATE OR REPLACE TYPE MER_OFFER_ACT_DATA_t
AS
TABLE OF MER_OFFER_ACT_DATA;
CREATE OR REPLACE type MER_OFFER_ACTION_DATA
AS
OBJECT
MER_OFF_ACT_DATA MER_OFFER_ACT_DATA_t
/+
My Declaration
+merOffActDataXML xmltype;
merOffActData MER_OFFER_ACTION_DATA := MER_OFFER_ACTION_DATA(MER_OFFER_ACT_DATA_t());+
Inside Pl/SQL block
+-- Converts XML data into user defined type for further processing of data
xmltype.toobject(merOffActDataXML,merOffActData);+
Thanks for your help
Beda
Edited by: Bedabrata Patel on Jul 12, 2010 5:51 AMBedabrata Patel wrote:
Below are the details:The details except for a description of the problem
I am facing a problem creating a appropriate a object type for a XML.And which error you are getting
Error in creation of Object Type http://download.oracle.com/docs/cd/E11882_01/server.112/e10880/toc.htm
And which version of Oracle you are getting the unknown error creating the unknown problem. -
Error in Creation of Object ID 00000000 is not allowed
Hi all,
When I am Hiring an employee using PA40, I am getting an error as "Creation of Object ID 00000000 is not allowed", when I save it.
In the NUMKR Feature, the return value has been assigned to the Personnel Sub Area.
Pls. can anybody explain, how can I solve this problem.
This is urgent requirement of client.
Thanks,
HR User.Hi Hr user
Now listen carefully.
1. If you have defined your feature NUMKR according to PSA then while running hiring action does PSA comes or it just gives you the Position, PA, EG and ESG fileds only.
2. If the first condition is true then you will get the error, now the question is why
Answer, you have defined the feature through PSA and once you try to save the IT0000 there is no PSA mentioned there thats why the system gives you the error.
If this explnanation is understood by you than reply , i will tell you how you can bring the PSA field also in hiring action at IT0000.
Do reply
Regards,
Bhupesh Wankar -
Error 1054 Open VI Object Reference
Hi Ppl,
I'm using LabVIEW 8.6 and I'm debugging a code that uses the Open VI Object Reference node. The parent reference thats passed in is a refrence of a VI instance and the vi object class is the control type. Though the control is present in the VI, the node returns error 1054 and says object not found.
I'm wondering why this was. However when the parent is the VI reference itself instead of the instance VI this works. I'm not able to understand the problem.
Thanks,
SathishSorry, I made what you have told me:
now i have this error:
why? If you have implemented a correct Vi can you give me it please?
Thanks!
Attachments:
ClearChart.vi 14 KB
test.vi 12 KB -
Error while creating Temse Object (W2 form in PU19)
Team,
When i try to create the w2 in PU19, i am getting the error statingthat ERROR WHILE CREATING TEMSE OBJECT HRLUS01A100900109026.Please advise me in this.(We are maintaining the HRSP-42).It is veryurgent,Expecting your valuable Guidance.Points sure for the answers.
Regards
Priya.KHi
let me know weather r u using any reference object which contain the routinee.
regards,
chandra. -
Error while creating PDF object
We are using Adobe Interactive Forms with Guided Procedures. Netweaver 7.0 SP14 (Dual stack Java & Abap). All was working well it appears until we configured SSL for ADS - don't know for sure if this caused the problem but it is the only change we can identify around the time that our problems began.
When we attempt to Create an Impersonalized Form we receive the following error -
Cannot retrieve template structure: Execution ended in an unrecognized state
When we attempt to test a callable object associated with an interactive form we receive -
Error while creating PDF object: PDF object could not be created; object returned from ADS is null.
In both cases the entries in the default trace log are the same -
Service XMLFormService: Native process (PID=0) /usr/sap/UFD/DVEBMGS02/j2ee/os_libs/adssap/XMLFormService/bin/XMLForm.exe terminated abnormally with error code 134
PDF object could not be created; object returned from ADS is null
com.sap.caf.eu.gp.base.exception.EngineException: PDF object could not be created; object returned from ADS is null
at com.sap.caf.eu.gp.model.iforms.adapter.pdf.AdobePDFAdapter.createInstanceDocument(AdobePDFAdapter.java:542)
at com.sap.caf.eu.gp.model.iforms.preproc.FormPreprocessor.execute(FormPreprocessor.java:507)
Like I mentioned earlier this functionality was working successfully in our environment at one time.
Any guidance in this matter would be greatly appreciated.
Thanks,
JoeJoe,
If you originally configured ADS without SSL, I would recommend going back through the ADS Configuration Guide for your NetWeaver stack and make sure all the necessary changes for SSL were made. I've seen another case where a step was missed in SSL configuration for ADS which caused a form to error.
If everything looks good based on your SSL configuration, I would recommend creating an OSS Note.
-Matt -
Error while activating ODS Object (urgent)
Hi Gurus,
I am getting an error while activating ods object.
Error/warning in dict. activator, detailed log --> Detail.
Row type /BIC/AGLCATODS00 is not active or does not exist.
Table type /BIC/WAGLCATODS00 could not be activated.
Table /BIC/AGLCATODS50 could not be activated.
Table is not yet classified.
Return code..............: 8.
DDIC Object TABL /BIC/AGLCATODS00 has not been activated.
Error when activating ODS Object GLCATODS.
If any one have come across this issue please help me out in resolving this issue.
I will reward points.
Urs,
Raki.Hi venkat,
There are only 3 info objects which i have created it and activated, only those i am pulling in the new ods but its throwing the same error what ever i do changes.
Is this issue is related to any authorization concerned?
Urs,
Raki. -
Error while activating ODS Object (BIC/WAGLCATODS00 &/BIC/AGLCATODS00 )
Hi Gurus,
I am getting an error while activating ods object.
Error/warning in dict. activator, detailed log --> Detail.
Row type /BIC/AGLCATODS00 is not active or does not exist.
Table type /BIC/WAGLCATODS00 could not be activated.
Table /BIC/AGLCATODS50 could not be activated.
Table is not yet classified.
Return code..............: 8.
DDIC Object TABL /BIC/AGLCATODS00 has not been activated.
Error when activating ODS Object GLCATODS.
If any one have come across this issue please help me out in resolving this issue.
I will reward points.
Urs,
Raki.Frank,
There is lot of free space in data base table i already checked it before.... in sm21 it showing database errors.
Strange i m unable to find out the solution.
Urs,
Raki.
Maybe you are looking for
-
I had to wipe my computer clean so i downloaded new itunes now i can't sign in
i had to wipe my computer clean so i downloaded new itunes now i can't sign in
-
Sap Gui Events to WD4A - Consecuences of note 1409237
Hi Guys! This is mi first post here, I hope I can solve with my question many same problems. I've got a problem applying this note in my WDA application. I've got an ABAP application with one CL_GUI_WDR_VIEWER control and within a WD4A component. In
-
How can I verify that I'm running as an Administrator on XP
Hi! I need to be able to verify from my Java program that I'm running as a user that has administration privileges. Does anybody have any tip on how to verify this? I can look in the registry if there is a registry key that will confirm this. My targ
-
SIS S550 Orders - cumulative quantity not working - quantities are doubling
We are using SIS S550 to gather our order info. We have Order Quantity field set to be a Cumalative Qty Type. This works in most cases. But it seems that when certain changes are made like Delivery Date at the Header level or Unloading Point, the
-
ACE bridge mode , FWSM routed mode
i have the following senario: MSFC ---vlan 777----FWSM----vlan160---ACE----VLAN180 FWSM is working in routed mode and vlan 777 is shared between the MSFC and FWSM ACE is working in bridged mode and vlan 160 is shared between the FWSM and ACE vlan 180