Error in Mass maintaince

Hello All,
While Doing mass manintaince for PPMs in SNP After generating for Discrete PPM i got message.
You cannot use unit for bucket consumption of res. -> res. 0010 1 00001 WPWNAC001_1004_005
Can u suggest what went wrong..
Amol Chavan

not sure if this will help but  looks like you are maintaining a mixed resource or bucket resource
if you drill down the PPM tree on /sapapo/scc03,  and see the resources - do you have any fixed or variable consumption and a unit entered there?
in your massd these should be fields BCAP1 and BCAP2 and BUNIT_R
Try to put a value in the BCAP1 and BUNIT_R (D for example) and see if you are still getting an error
If this sorts it out you need to find out the right values and enter them

Similar Messages

  • APO DP - BADI for storing forecast error in mass processing

    I am using APO DP V5.
    Does anyone have experience of using the BADI for storing the forecast error in mass processing?
    My questions:
    1. Which BADI is it?
    2. Which forecast errors can it store (eg MAD, MAPE, customer specific errors?)
    3. How does it work - does it store the fcst error(s) in a key figure, or a table?
    Any advice appreciated.
    Thanks,
    Bob Austin, Atos Origin

    Bob,
    Go to SE19 --> create implementation: BADI name /sapapo/sdp_fcst4. give some Z name to implementation. Go to interface tab, select activate_fcst_version method, just write 1 line code inside:
    ev_flag_active = 'X'.
    activate the method, activate the BADI implementation too.
    This BADI records background forecasting errors into these two tables: /sapapo/fcsthead & /sapapo/fcstaccu.
    Rgds,
    SB.
    It stores all of the forecast errors including customer specific errors.
    SB.
    Edited by: SB on Jan 25, 2008 12:38 PM

  • Error during Mass Maintenance of Material Master

    Dear All SAP guru,
    During mass maintenance of order unit ( PCS) and variable order unit "1" (Active) from T-code MM17, system is giving one error message.
    Error Mess:  30000052280140 : Messages have been issued: number MASS000120000000 and notification No.:
    MK101.
    While system allowing automatically to log through MM90, but after puting the log no.: MASS000120000000, system is not execting.
    Pl suggest ....as conversation factor is also maintained in material master for this.
    Regards,
    Pinku.

    HI ,
    check note 487111.
    According to this note
    Symptom
    In the planning data mass maintenance (MPGD_MASS), you select the "Conversion" field (UMREF) and enter the new value e.g. '2,01' and save the change. In the log of the mass maintenance, the system issues error
    MK101:
               ....... : Messages have been issued: number MASS............
    Detailed display of error message:
    Message number BF 020
               Value cannot be interpreted as a floating-point number. Other terms
    Reason and Prerequisites
    The problem is caused by a program error.
    The symptom occurs if during the maintenance of your own user profiles, you defined "Comma" for the decimal notation (Transaction SU3).
    Due to a program error, the system saves the value of the field to be changed program-internally in the exponential display with "Point" as the decimal place (2.01E+00).
    Solution :
    You have implement the solution mentioned in the note .
    Regards,
    Anupam

  • Error in mass update program

    Hi
    I am performing a mass updation of  BP'S using the FM crmxif_partner_save,while executing my report i am getting a short dump with the error dbif_rtab_sql_error
    can anyone help me how to rectify this issue
    regards
    sandhya

    Hi Sandhya,
    This issue is related to Basis ask ur basis guy to Apply the latest support packages for your version
    Have a look at OSS Note:439834
    Cheers
    Manohar

  • Xd99 trying to run mass maintaince

    Hello All,
    In our dev when do a mass change in xd99 we are getting the following error.
    Number '0' is not defined
    Message no. F2613
    Here i change customers in a certain zip code from one sales rep to another. attached are the errors. i was using kna1 and knvv.i picked postal code and sales group number. i go into customer master sales data and make the changes to the new sales rep and then the above errors come up:
    Can any body suggest what needs to be done in order to fix the error
    Regards,
    Satish

    Hi Senya,
    I have recieving the same issue 'Number 0 is not defined with message no. F2613 but in my case the BP relationship is contact person and data is flowing from HR ALE to CRM with BP role employee. Kindly help me out where is exact problem to fix. Please help.
    Thanks,
    Varun
    Edited by: varunsh on Sep 15, 2011 8:06 AM

  • Error in Mass role import in Role Expert

    Hi,
    While configuring role expert, in mass role import ,I am able to import the bulk download file but its import is getting failed and error is "<b>File is in invalid format</b>"
    If I alter the downloaded file, another error is generated saying "<b>Cannot write to Upload Directory
    ursula\sap_temp\ROLEIMPORT or Directory does not exist.</b>
    Please help me out!
    Regards,
    Anubha

    Hi Michael,
    I am not able to import the SAP roles properly.
    I downloaded the roles from backend properly. But while importing them I am getting a list of backend roles and against each of them following message <b>Error in processing role infomation. Role not imported</b>.
    What could be the possible mistake? I have set <b>Upload Directory</b> = ursula\sap_temp.
    One more problem, while creating a new role I am able to reach successfully till the risk analysis phase. After that, as soon as I click on approval , i am getting message <b>Error in creating request</b>.
    I suppose the control should go to Access Enforcer from here.I have already set AC Workflow URL for role approval in Configuration -> miscellaneous.
    Thanks in advance!
    Anubha

  • Error when mass transporting roles

    Hello,
    I'm trying to mass transport all of our Z roles from one CRM system to another that's not in the same transport path and am receiving a "Unexpected EOF after ' ' bytes" error on import. The transport had about 60 pfcg roles in it. I then created a new transport with about 15 roles and receieved the same error. I then made another transport with a couple roles and it was fine. My question is how can I move all of my roles without having to do a few at a time. Is it possible? I'm not moving the generate profile or user assignment.
    Thank you,
    Alex

    Hi Alex,
    "Unexpected EOF after ' ' bytes"
    Please get in touch with Basis team and get the tp size checked. It seems the size limit of tp has exhausted. By increasing its size this issue might get resolved. Let us know if you need any more information from our side.

  • Hardware Test Error Message - Mass Storage Error code ata 1/6/8 HD: 2,0

    I have an imac 15" flat Panel, 700 MHz . after getting the flashing question mark, running or trying to run all the standard tests, (pram, Software Restore, disk repair, reinstall, kernel repairs) I never see the hard drive or volume. I saw it was a maxtor HD with 0 bytes at one point.
    I now ran the Apple Hardware Test think I lost the Hard Drive...this is the feed back:
    Airport- Passed
    Logic Board - Passed
    Mass Storage - Error Detected
    Memory - Has Not been Run yet
    Modem - Device Found
    Video RAM - Has not been run yet
    Error Code ata 1/6/8 HD: 2,0
    Could anyone help me diagnose the issue? I think I can replace the HArd Drive myself, if I knew this was the problem and what I need to buy to replace.
    Thanks,

    I have a different take to a brody having replaced my hard disk and opened my iMac G4 up several times. Many people find that Apple Authorized Service Providers tend to give extortionate quotes for such repairs. Feel free to get a quote yourself. I'll provide the same advice I've given to many many other Apple Discussions users who have successfully replaced their hard disk themselves. 
    The iMac uses a standard desktop PC hard drive. It is 3.5" wide and in the iMac G4 uses the IDE connection. The iMac 700MHz 15" has an ATA66 bus so can use ATA66, ATA100 or ATA133 drives but not ATA33 or SATA. You should buy a 7,200rpm drive with a cache of 8Mb or higher as this also increases the speed over the original 5,400rpm drive installed so you should get a performance increase.
    Here is a list of suitable hard drives.
    It's pretty fiddly to work inside an iMac G4 so you must be very cautious. Always take anti-static precautions. Here are three options for guiding you through the procedure:
    MacWorld
    xlr8yourmac
    Service Manuals
    I've also taken a fair few photos which you can find here.
    I'd advise reading the reports on the xlr8yourmac's drive database so get other people's experiences first.
    You must replace the Thermal Paste when you close the iMac up or it will overheat.
    It's probably worth replacing the PRAM Battery whilst you're in there as these have a finite life (once they fail to re-charge you may start to run in to snags - it's only a $5 part).
    The hard disk should be set to Master (link).
    Some iMac G4 700MHz users have reported that they are unable to address hard drives larger that 128GB, there is an application called SpeedTools that can be used to overcome this addressing limitation.
    You might also give consideration to installing a 512MB PC133 DIMM or an 18x DVD±RW Dual Layer burner whilst you do this update; both of which will have to be removed during the process.
    You must be very careful around the video connector in the iMac; it really is very fragile. In fact there is no need to touch it at all in my experience.
    It is possible that the ATA controller on the iMac's logic board has failed rather than the hard disk. Given the cost of the logic-board it would not be cost-effective for an iMac G4 700MHz.
    Let us know how you get on.
    mrtotes

  • Error in Mass role import

    Hi All,
    I am trying to do a mass role import in ERM. We are using version 5.3 SP10.  When trying to mass import the roles I get an error Enter a valid Enterprise Role Management Information File format. I am using the dumps form executing the program /VIRSA/RE_DNLDROLES. I am using the output in .txt format.
    Is there any way to get around this issue.
    Thanks,
    Chinmaya

    Hello Chinmaya,
      You need to have the information file and the org file in .xls format. Kindly download this file from backend and then change the extension to .xls, modify it to check that data is arranged in proper columns and then save it as .xls format. Once you do that and try to upload this error will not come.
    Regards, Varun

  • "red X" error during mass-compiling installing labview upgrade 6.0.2

    I always get a "red X" error during installation of the LabVIEW 6.0.2 upgrade.
    The mass compiling always fails.
    The environnement is an italian version of W98.
    Salvatore Randazzo
    [email protected]

    I would try compiling one directory or .llb at a time instead. See if you can isolate the problem.

  • Error in mass change for info records -MEMASSIN

    Hello Friends,
    We want to mass change the info records. We want to set the "Unlimited del" indicator to all the Info records which is not there currently.
    When we tried to do the same, we came across an error saying  -
    "5300177458 : Enter Purch. Group (5300177458)" ....message type ME083.
    but purch grp is maintained in all the Info records.
    Can anybody help us to fix this issue ?
    Thanks in Advance,
    Vidyadhar.

    Hi all,
    Thanks for your inputs.
    1st thing - pur grp is maintained in customizing also. ..not deleted in customizing.
    2nd thing - in MASS trans selection, I selected pur org, plant, and unlimited del options....still its giving me the same error.
    any other solution pls ?

  • ERROR: Wip Mass Load-----WIP_ML_ORA_ERROR

    When I import Job order from MES system,I get an Error after request the "WIP Mass Load".The error message is like that :
    Error: WIP_ML_ORA_ERROR ( ERROR_CODE=-1653)
    And the Process_Status is updated to WARNIING,the Job Order which is request in this program can't be add to WORKING IN PROCESS.
    What is the reason and how can I avord it?

    Have a look to the Metalink note "Note:207646.1", which deals with the error "WIP_ML_ORA_ERROR (ERROR_CODE=-1653)".

  • Media Sync Error - enable mass storage manually message repeats

    I have a blackberry 8310 with an extra memory card installed. 
    Every time I try to use Blackberry Media Sync I get an error message that reads: The connected Blackberry device required mass media storage mode to be enabled manually, please do so from your device and click Retry. 
    However when I have enabled mass media mode manually and clicked retry, it gives me the exact same message, or sometimes sits there saying connecting to Blackberry device indefinitely. 
    I have checked for updates both for my desktop software (version 5.0.1) and my Media Sync software (Version 2.0.0.27) all other software is working normally, and I can move music to my device with media manager (which I only tried after receiving the error message about 20 times). 
    Any suggestions?

    Hi and welcome to the forums!
    Have you used this media card in a different Blackberry and used media sync
    with it? Please read the link on the bottom of the post about Media Sync.
    DId you format it in the Blackberry when you received it?
    On solely your Blackberry, can you store a picture and retrieve it?
    Go to options>memory and set the following options:
    Use the following settings in the memory option of the device:
    Compressions enabled
    Media card support ON
    Media transfer protocol ON (Storm and Bold only)
    Mass storage support ON
    Auto enable Mass storage support when connected ON
    Save all changes. Now back out of the memory section and go to security>encryption> DISABLE.
    Do a battery pull as listed below and let us know how it goes.
    Thanks,
    Bifocals
    KB15591
    Name assigned to the BlackBerry smartphone in BlackBerry Media Sync follows the MicroSD card
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Error while mass conversion of Planned order to production order

    Hi All,
    Thanks in Advance for help. We are facing one issue since Oct-2011.
    We have set up batch jobs for early morning to convert planned orders in to production orders. This is set up for transaction COHV.
    We have both MTO and MTS scenario.
    But problem occurs in Make to Order (MTO) scenario.
    Error comes in ST22 as   " SAPSQL_ARRAY_INSERT_DUPREC"
    *..Reservierungsköpfe inserten
      IF NOT rkpf_i[] IS INITIAL.
        INSERT rkpf FROM TABLE rkpf_i.
      ENDIF.
    Note : This error is not coming on consistent basis, it comes randomly. Secondly we are not aware of the reason/root cause of this error, hence not able to replicate error at all on Quality server.(Quality is backup of production till nov-2011)
    Writing to SAP, they debugged and provided note 504255. A part of that note says "Remember that this note describes a MODIFICATION which differs from
    the standard behavior of the system. Therefore, the customer assumes
    the responsibility for the implementation of this source code
    change. Due to this reason, SAP AG does not provide any support or
    maintenance for the changed source code."
    Hence client is reluctant to implement that note.
    Can any one help us out on
    1) What can be the cause of error as mentioned above?
    2) Resolution apart from SAP note?
    Best regards,
    Ravi Davda

    Hi Ravi,
    I am also facing same kind of issues from past couple of months.
    Sometimes this issue come up as sales order credit ststus is not approved and some times it happens due the following error INSERT rkpf FROM TABLE rkpf_i..
    I am also looking for some permanent solution.And today I have also faced same error and will be converting it manually.
    And can you tell for which client you are working?And if you find any solution for this please update me
    Regards
    Punjabi

  • TSV_TNEW_PAGE_ALLOC_FAILED Error in Mass Update of Alternative Hierarchies

    Hi Experts,
    I am updating Cost Centers in the alternative nodes by calling a standard Program
    PERFORM hierarchy_generate IN PROGRAM saplkkhi.
    All these Entries are coming from a file having a Cost Center and respective hierarchies
    under which it should be updated.
    Suppose in a file a Cost Center was attached to one node and if it needds to be detached
    in to another node within same common node i am using a Function Module K_HIERARCHY_UPDATE
    to update the cost center under given node.For all these Process i have created a Z Function
    Module.
    A report is executed in background which calls the above FM and was supposed to display all
    the Cost Centers and Hierarchies attached.
    Unfortunately I am getting TSV_TNEW_PAGE_ALLOC_FAILED Error even when i am Processing the
    Report in Background.
    Please help me solving this Issue.
    Regards
    Manjari Patankar

    As an addition to the answer from Siegfried.
    Very often SAP application developers define internal buffering tables (in ABAP) to store some information for the fast access. Initialization of these tables are normally programmed in some function modules that are called in certain scenarios. However I have seen the cases where initialization was not intended at all. Developers motivated it with the fact that corresponding functions are not designed to call them in batch many times or with large data volumes.
    If such kind of initialization does not happen, you are going to have memory issues.
    I would proceed as follows:
    1. Run your job in foreground
    2. In SM50/SM66 monitor the memory consumption of the work process.
    3. When it goes high, debug the work process from SM50/SM66.
    4. Being in debugger, look at the memory areas and find out objects that occupy a lot of memory.
    5. Display these objects (normally internal tables) in ABAP editor and use "where used list" to find the places where they are initialized.
    6. Try to call initialization functions/subroutines in your coding after each data package and subsequent commit work and wait.

Maybe you are looking for