Error in Mass process chain DP background job for Deinitialize version

Hi,
When I execute the process chain for DP background job to delete the planning area version, it gives error message
"Process DP Background Processing, variant DELETE XXXXXXX has status Ended with errors (instance D973YTQRSF0FRPV5TCR28L"
It is working well, when I tried the same manually with the same input parameters used in background job variant.
What could be the cause for the background job problem.
Thanks and regards
Murugesan

Hi Datta,
I am not deleting the planning version, I am using Macro in the DP background job to delete or make the key figure values to 0.
Thanks and regards
Murugesan

Similar Messages

How to find process chain using background job in sm37

How to find process chain using background job in sm37

Better is to select the job.
Select (Define) Step (s) or F6.
Select the line and Menu Goto>Variant.
The variant contains the name of the CHAIN and its VARIANT.
Success
We faced an old job and via job monitoring we were informed about a cancelled job every 'interval'.
We noticed that the related chain was deleted but still the job was scheduled each interval again and was cancelled because an event was missing
We could not find the scheduled job via SM37.
Via view V_OP, view over tbtco abd tbtcp, we find the related entry.
We delete these entries via function BP_JOB_DELETE....
Edited by: Jack Otten on Jul 9, 2010 2:50 PM

Scheduling of process chain with background job

Hello All,
I have scheduled the process chains through background jobs. I have copied the meta chain and created seven background jobs that is from Monday till sunday. The problem is most frequently the job gets cancelled with the message
Process CHAIN, variant PAA1_GS001 is not scheduled waiting for event RSPROCESS 44NRPDWZ7CQUJ92ATDTY6368H.
This is the variant for the next process after the start process. I tried by giving merge active versions, but one day the background job runs fine , but the next day it gets cancelled.
If anyone has faced this issue before kindly let me know.
Regards,
Karthik.

Hi,
It seems to be there may be in probelm in Varients, so create a separate Varient for each PC and then activate the PC and execute.
Thanks
Reddy

Triggering process chain in background

Hi All,
Could you please tell me how to trigger a process chain using background job ?
Thanks,.

Write a program to achive this based on your condition raise the event using function module.
BP_EVENT_RAISE
In the the process chain in the start process in scheduling options-----> use AFTER EVENT.
To create a event you can in SM62.
Hope this helps.
Edited by: Praveen G on Oct 6, 2008 9:24 AM

Background Processing? how schedule job for "System Error" Message .

Hello everyone,
in sap help i have read.
http://help.sap.com/saphelp_nw04/helpdata/en/5a/f72040599a8f5ce10000000a155106/frameset.htm
PCK> Monitoring>Message Monitoring-->Background Processing
you can schedule jobs for various background processing:
●     Archiving of messages processed successfully
●     Deletion of messages that are not to be archived
●     Restarting of messages with errors
●     Rescheduling of lost messages
can anyone understand this docu?
give me some introduction, how can i define and schedule these jobs ?
thx in advance!!
best regards
Yaning

Background Processing
Prerequisites
You have started the message monitor on the initial screen of the PCK and are in Background Processing.
Features
Archiving
You require two archiving sessions to archive messages:
●     One session to write the messages to the archive
●     One session to delete the persisted messages that have been archived
To do this, you schedule an archiving job, which implicitly schedules the sessions to write to the archive and delete the archived messages.
You can define one or more rules for each archiving job; these rules contain conditions that a message must meet in order to be archived by the job. At least one of the defined rules must be met for archiving to take place.
All information that is displayed for a message in message monitoring is archived, in addition to the audit log for each message.
Deleting
A standard delete job is created automatically. It runs once a day. You can schedule additional delete jobs; however, you cannot define rules for them.
Restarting
Instead of restarting messages with errors manually with message monitoring, you can schedule a job to automatically restart these messages. This is possible for all messages for which the number of defined restart attempts has been exceeded (messages with the system error status).
You can define one or more rules for each job to restart messages; these rules contain conditions that a message must meet in order to be restarted by the job. At least one of the defined rules must be met for archiving to take place.
Rescheduling
A standard job to reschedule messages is created automatically. The job runs once a day and ensures that messages lost as a result of database failure, for example, are rescheduled. You can schedule additional rescheduling jobs; however, you cannot define rules for them.
Thx Aamir.
But I mean the messages with errors in Adapter Engine , not in Intergrations Engine.
the situation is like Naveen Pandrangi's WebLog
II. Errors in Adapter Engine [XI : How to Re-Process failed XI Messages Automatically|XI : How to Re-Process failed XI Messages Automatically]
I
Till now we have seen how to resubmit/restart message that failed in Integration Engine. One a message makes it from Integration Engine to Adapter Engine, the message is flagged as checked in Integration Engine. The status of the message in Adapter engine does not effect the processed state in Integration Engine. Now if this message was asynchronous, XI will by default try to restart the message 3 times at intervals of 5 minutes before the status of the message is changed from Waiting to System Error .
*how can i schedule a job to automatically restart these messages with errors?
best regards
Yaning
Edited by: Yaning Liu on Aug 18, 2008 1:43 PM

How to identify what are all the errors appears in process chain,

Hi all,
i have a process chain running, but i want to find out what are all the errors that the process chain has thrown
thanks
pooja

Hi Pooja,
Errors in monitoring:
SID error
Reason: If the corresponding master data is missing for the particular transaction data.
         1. Check for the load timing for the respective master data, if it less than an hour then make the request red and repeat the ip.
         2. If the data is loaded to PSA then you have to delete the request from target and manually push the data to from PSA.
         3. If we are required for selective update then note down the info source from header and find it in RSA1,select the one with Single as postfix.
         4. Goto data selection tab and change the range.
Tip: change the last 4 digits for from to 0000and the last 4 digit for to     9999.
        5. Repeat the ip.
         6. In case only of failure in one target goto RSA1 find the PSA, put he request no. and reschedule it.
Note: IF PSA is present never make the request red rather delete it.
Replication error
Reason: Data source replication Failed.
         1. In order to handle this error you should be known to IP, info source and source system.
         2. Goto RSA1, find the data source in the source sys tab.
         3. Right click on the data source and replicate it.
         4. Since all the transformation rules pertaining to this data source need to be reactivated so go to SE38 and execute rs_transtru_activat_all, data source and sys name.
         5. Delete the red request from the target.
Update R not supported
Reason: The corresponding initialization flag for the ip is lost.
         1. Goto header click on the ip and goto schedule tab and click initialize in the source system, whatever screen appears delete the only request present(the initialization flag).
         2. Goto RSA1, find the ip in the info source (one with the Adhoc initialize flag).
         3. Goto update tab and select Initialize delta process try going for with data transfer.
         4. Reschedule the IP.
Duplicate Record Error
Reason: Duplicate error records for the loaded master data.
         1. Goto info package via header or via RSA1.
         2. Goto processing tab and change the ip setting, selecting only PSA and ignore duplicate records and re run the ip.
         3. Do remember to change the ip settings back to the original once after the second step.
ODS activation failure
Reason: Prerequisites for ODs activation not satisfied i.e. unique key.
         1. Goto maintain variant.
         2. Check for the QM status of the requests in the target they should be green.
         3. Then click the ODS activation tab.
         4. In the screen which appears put the requests for which ODS activation failed.
         5. Activate these and keep on refreshing them until status reverts from green,
Remember to refresh these requests one at a time.
         6. If requests are red then delete them from target.
         7. Reschedule the IP.
Note: Never Try activating ODS manually if it is Y1.
Aggregate Rollup error
Reason: No aggregate found for the respective rollup.
         1. Click on the variant in which the error occurred.
         2. Goto chain tab and copy the variant and instance.
         3. Run the nestle provided program YBW05.
         4. Put in info in there and put the status as g green.
         5. Execute and refresh the status.
Lock issue
Reason: The same ip is been locked by other user or may be used by other process chain.
         1. We can see the locked entries and in the transaction SM12.
         2. Wait for the other process to get complete once the ip loads to target in that process then there is no need for running it for the process.
         3. In other case make the request red, when PSA is present then goto environment tab ->schedule->initiate update.
         4. In the box appears select update in the background.
         5. And the manually update the failed IPs by selecting manual update in the context menu.
Alfa confirming value error, Time conversion error, Chain didnt start, Delay due to long running job, Poor system performance,Heirarchy node exist in duplicate.
Reasons:
Alfa confirming error: Data format mismatch.
Time conversion error: Date, time format mismatch.
Chain didnt start: A scheduled chain didnt triggered at the prescribed timing.
-For all the above error we have to raise a ticket.
Idoc or TRFC error
Reason: An Idoc is been stuck somewhere.
         1. Reload the Master Data manually again from Info-package at RSA1.
         2. Release the Idoc.
         3. In the source system level got environment->transaction->Transaction RFC or Data ware housing level.
         4. In the Screen if the status is Transaction Recorded it means its stuck goto edit and click Execute LUW or press F6.
         5. If status is Transaction executing then it means its fine wait.
         6. Or raise ticket.
Error Due to short Dump
Reason: Error due to Short dump could be due to many reasons i.e. memory, table space, lock, error record, page allocation, failed change run.
Process terminated in the Source system.
           Reason: Sometimes we face that a load has failed due to job Termination at Source System.
      This happens due to unavailability of the source system or some connectivity problem between source and target systems.
1.      Make the request red.
2.      Delete the request from the data target.
3.      Reschedule the ip.
4.      If still the job fails raise the ticket.
And also check in following links:
Process Chain Errors
/people/mona.kapur/blog/2008/01/14/process-chain-errors
Common Process chain errors
For Data Load Errors check this blog:
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Pls assign points if it helps u,
Thanks & Regards,
Madhu

Error handling in process chain-doubts

Hi ,
I have some doubts in error handling of process chains.
1) I have aprocess load infopackeage and subsequent process is update fromPSA.
process load infopackage got failed , so i loaded the IP manually and repeated the next i.e process update from PSA .
How to correct the process chain from now?
2) I have aprocess load infopackeage and subsequent process is Delete request in infocube .process load infopackage got failed , so i loaded the IP manually and repeated the next process i.e Delete request in infocube. Chain continued by deleting the right request . How this is possible ?
Plz help me as this is urgent and daily i have to deal with this issues. If any documents on error handling is greatly appreciated.
My mail id is [email protected]
Regards,
Pavan

Hi Pavan,
Hope the following links will give u a clear idea about process chains and clear ur doubts.
Business Intelligence Old Forum (Read Only Archive)
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9936e790-0201-0010-f185-89d0377639db
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/263de690-0201-0010-bc9f-b65b3e7ba11c
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
Errors in monitoring of process chains can be categorized into 4 different sections...
Master data - Full Update
Master data - Delta Update
Transaction data - Full Update
Transaction data - Delta Update.. in terms of loading of data which can be due to server shut down or system maintenance... errors due to incorrect entries in the OLTP system in which case you'll have to fix the errors in the PSA and manually load the data...
Otherwise it can have errors on Attribute change run being locked by some other job... Aggregate Roll up failing because of attribute change run being run at the same time... Problem with hierarchies and save hierarchies...
There can be problems with the data store activation if the ODS object contains any incorrect request sitting inside it... then, you need to delete the incorrect request and reload the data again...
In case of Transaction Delta failure, you'll have to request for a repeat either manually in the infopackage or using the repeat option if available on right clicking the load event...
For Master Data Delta failures, you need to do an Re-init by deleteing the previous initalization condition in the "initalization option for source systems" in the menu scheduler or reschedule the enitre chain... because, master data generally do not support repeat of last delta ...
U can even look into these links:
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
For common data load errors check this link:
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
****Assign Points if Helpful****
Regards,
Ravikanth.

Infopackage loads 0 record in process chain as BG job not running correctly

Hi Experts,
I have scheduled a daily process chain for Purchasing.
The infopackage in the process chain loads 0 records from R/3 and shows green status but data is available in R/3. Its a FULL update.
But when I load the data manually the infopackage fetchs the record form R/3.
When I checked the background job in R/3 that loaded 0 records, the job gets finished abruptly without fetchig any data.
Please find the job log below:
Job started
Step 001 started (program SBIE0001, variant &0000000210024, user ID RFCUSR)
DATASOURCE = ZPUR_S600
         Current Values for Selected Profile Parameters               *
abap/heap_area_nondia......... 0                                       *
abap/heap_area_total.......... 0                                       *
abap/heaplimit................ 40894464                                *
zcsa/installed_languages...... ED                                      *
zcsa/system_language.......... E                                       *
ztta/max_memreq_MB............ 2047                                    *
ztta/roll_area................ 3000320                                 *
ztta/roll_extension........... 2000683008                              *
Job finished
But the background job for the request when I run the infopackage manually calls a function BW_BTE_CALL_BW204010_E (BTE) and fetches the record from R/3.
Please find the job log that fetches the record when run manually.
Job started
Step 001 started (program SBIE0001, variant &0000000210036, user ID RFCUSR)
DATASOURCE = ZPUR_S600
         Current Values for Selected Profile Parameters               *
abap/heap_area_nondia......... 0                                       *
abap/heap_area_total.......... 41230008320                             *
abap/heaplimit................ 40000000                                *
zcsa/installed_languages...... DE                                      *
zcsa/system_language.......... E                                       *
ztta/max_memreq_MB............ 2047                                    *
ztta/roll_area................ 3000000                                 *
ztta/roll_extension........... 2000000000                              *
Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 26,596 records
Result of customer enhancement: 26,596 records
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 26,596 records
Result of customer enhancement: 26,596 records
Asynchronous send of data package 000001 in task 0002 (1 parallel tasks)
Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 26,596 records
Result of customer enhancement: 26,596 records
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 26,596 records
Result of customer enhancement: 26,596 records
Asynchronous send of data package 000002 in task 0004 (1 parallel tasks)
Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 1,062 records
Result of customer enhancement: 1,062 records
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 1,062 records
Result of customer enhancement: 1,062 records
Asynchronous send of data package 000003 in task 0006 (1 parallel tasks)
tRFC: Data Package = 000001, TID = , Duration = 000001, ARFCSTATE =
tRFC: Start = 20110217 054648, End = 20110217 054649
tRFC: Data Package = 000003, TID = , Duration = 000000, ARFCSTATE =
tRFC: Start = 20110217 054652, End = 20110217 054652
tRFC: Data Package = 000002, TID = , Duration = 000001, ARFCSTATE =
tRFC: Start = 20110217 054651, End = 20110217 054652
Job finished
Kindly help me on this issue as why the job run through process chain is not fetchibg any records.
Regards,
Indhuja

Hi Prasanth,
If the background jobs are not availbale when IP is triggered then the BG job will ot be executed and the IDOCs will get struck.
Once we push the IDOc only the BG job will be executed until then the PC will wait with yellow status.
Hence this is not the issue with the non availability of BG WP.
Also for last one week this issue was happening but today the job executed successfully through the Process chain itself.
Then it shows this is not the issue with PC also.
The job is executed using RFCUSR.
Please suggest what would be the possible cause for this issue.
Regards,
Indhuja
Edited by: Induja Rajkamal on Feb 23, 2011 11:48 AM

APO DP - BADI for storing forecast error in mass processing

I am using APO DP V5.
Does anyone have experience of using the BADI for storing the forecast error in mass processing?
My questions:
1. Which BADI is it?
2. Which forecast errors can it store (eg MAD, MAPE, customer specific errors?)
3. How does it work - does it store the fcst error(s) in a key figure, or a table?
Any advice appreciated.
Thanks,
Bob Austin, Atos Origin

Bob,
Go to SE19 --> create implementation: BADI name /sapapo/sdp_fcst4. give some Z name to implementation. Go to interface tab, select activate_fcst_version method, just write 1 line code inside:
ev_flag_active = 'X'.
activate the method, activate the BADI implementation too.
This BADI records background forecasting errors into these two tables: /sapapo/fcsthead & /sapapo/fcstaccu.
Rgds,
SB.
It stores all of the forecast errors including customer specific errors.
SB.
Edited by: SB on Jan 25, 2008 12:38 PM

Error in Schedule Background Job for Deadline Monitoring of swu3

While Auto Customization swu3 i am getting error message 'Output device "" not known' in 'Schedule Background Job for Deadline Monitoring'
Please advice what could be cause of it

the earlier problem of background job was solved by changing the output device assigned to user wf-batch .
regarding the transport request :
when i was trying to execute the step : "Schedule bakgrd for missed deadlines " MANUEL it was giving me an option of SAVE AND SCHEDULE . which was creating the transport request . but when i executed it automatically it worked fine without asking a request to me ... i don't know why )-: ... probablly we can specify a different interval then the standard of three minutes and which will be transported (it's just a guess) . i have executed it automatically ...
well thanks all for u r help

Error in background job for program RSGET_SMSY error message No active job

Hello!
I would like to set up the Change Request Management functionality in SAP Solution Manager.
The only red warning by executing Test-button in Tcode SOLAR_ADMIN_PROJECT is:
<b>Error in background job for program RSGET_SMSY error message No active job found</b>
Can someone please tell me how to solve this problem?
(tcodes, technical steps)
Thank you very much!
regards
Thom

Thank you very much!
Can you also help me with the warning "Errors occurred during synchronization of the system landscape" in tcode SOLAR_PROJECT_ADMIN" --> System landscape --> Change requests --> "Refresh"?
The second issue I cannot see any projects in Tcode "/TMWFLOW/CMSCONF"
according to the SPRO-step "Set Project Assignment of Requests as Mandatory"
Thank you!
regards

Error messages in Process chains

Hello BI fans
In which transaction can I maintain batch-initiated error messages from process chains.
I am not looking for the process chain variant for messages.
I would like to create messages only for errorness messages.
thanks
BEO

Hi,
Please check the forum before posting for this issue.
Here You can follow below steps:
1) right click on process type and select "create messages".
2) choose "error" and create variant for error message
3)write message body in "EDIT DOCUMENT" and mention email ID's in "Maintain Recipient list" tab
4) save and schedule the chain again
Edited by: shailesh patil on Nov 14, 2011 5:51 PM

How to deactivate *Schedule Background Job for Work Items with Errors* SWU3

Hello Guys,
Can any one tell me how do I DEACTIVATE Schedule Background Job for Work Items with Errors in sap workflow SWU3.
Currently it is green which I don't want. I want to stop this service.
Regards
NK

Hello,
You could also just stop the job in tx SM37.
But why would you want to do this? As a test?
regards
Rick Bakker
hanabi technology

Program works but background job for that program fails....

I have a requirement where I have to collect the details of the purchase order and put the details in XML file format and FTP the XML file to an external third party FTP Server.
To realize this I developed a report program which follows following logic.
1)     First I collected the PO details by calling the BAPI BAPI_PO_GETDETAIL1.
2)     Then using the following link "/people/r.eijpe/blog/2005/11/10/xml-dom-processing-in-abap-part-i--convert-an-abap-table-into-xml-file-using-sap-dom-approach
I converted these PO details to the XML file format that the third party people accept.
       In the code I used u201CCALL METHOD cl_gui_frontend_services=>gui_downloadu201D and in this process first the XML file is generated and is getting stored on my deskytop.
3)     Then I called HTTP_SCRAMBLE, FTP_CONNECT, FTP_COMMAND , FTP_DISCONNECT and RFC_CONNECTION_CLOSE.
This works perfectly well and each time I execute the report the file is getting FTPu2019ed to the third party FTP server.
Now I tried to schedule a batch job for this and the batch job fails with follwing errors
02/25/2009 15:08:47 Error in Control Framework
Message Class = FES
Message Number = 022
Message Type   = E
02/25/2009 15:08:47 Job cancelled after system exception ERROR_MESSAGE
Message Class = 00
Message Number = 564
Message Type   = A
Can some one tell me what is going wrong. My report works perfect in front end but fails if I try to schedule a background job for it in SM36.
Can you please tell me whatz going wrong with batch job? Any Help is highly appreciated.
Regards,
JEssica SAm

Robert...Thanks for the reply...
I am using follwing code
l_xml_size = l_ostream->get_num_written_raw( ).
    CALL METHOD cl_gui_frontend_services=>gui_download
      EXPORTING
        bin_filesize = l_xml_size
        filename     = FILEPATH
        filetype     = 'BIN'
      CHANGING
        data_tab     = l_xml_table
      EXCEPTIONS
        OTHERS       = 24.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
Now what changes should i make..where should i store my XML file then instead of my desktop?
and whih Function Module should i Use..

BPM - Background Job for Reorganization = Not Scheduled

Good afternoon, first of all thank you very much for the support they can provide. I have developed a JDBC interface -> BPM (Multimapping) which works well. Modify a Message Mapping in the BPM that I use for an RFC Lookup, I have added the Configurable Parameters in the BPM and Integration Directory and everything works fine at design time. But when running the interface at run time the message reaches the BPM and the error "error in BPE inbound Permanent processing".
I have reviewed the Business Process Engine in the RWB and the item is Red Schedule Background Job for Reorganization and detail reads: "Background Job for Reorganization = Not Scheduled".
As I can solve this problem. Thank you very much.

Re: Importing trans request failed
Re: Transports Erroring
Re: What is RDDIMPDP .....
have a look it may help you
Message was edited by:
Vinod Udapudi
Message was edited by:
Vinod Udapudi

Error in Mass process chain DP background job for Deinitialize version

Similar Messages

Maybe you are looking for