Error in Material Master download

Dear all,
We are in SRM 4.0 with support pack level 11. We have revalidated our setting as per sap note 720819 as well. While downloading the material master from ECC system we are facing this error in our inbound queue.
"Function module "CRM_DOWNLOAD_RCV_EXIT" not found"
Kindly suggest the solution.
Regards
Dinesh Singh

Hi,
See these threads for more pointer/info:
Re: Function module "CRM_DOWNLOAD_RCV_EXIT" not found error
Re: ERROR MESSAGE IN SQM2
Also see whether all the steps have been performed as mentioned in this weblog:
How to replicate material master from R/3 to SRM
BR,
Disha.

Similar Messages

UOM error in Material master.

Hi
When we log on to Spanish language, we are getting error in material master for Unit of measure, that the unit of measure has not been created in the language ES. But same UOM has configured in EN language and its working fine for material, while in Spanish language it appear as *** with error details,
Could you please suggestu2026
regards
Vanraj

Hi,
Extactly you are right..you got to Logon in Languange ES and create the required UOM in t-code CUNI...
this shuld solve the issue..try and revrt back..
Also,In CUNI on top menu Go to-Translation-UOM here maintain Source lang to Target lan
Reg,
JJ
Edited by: Jagsap on Apr 20, 2010 4:10 PM
Edited by: Jagsap on Apr 20, 2010 4:15 PM

Material Master download to file using Idocs

I need to download Material Master to Application server or local PC using Idoc's. Is there a way to achieve this?

Hi,
You can use the userexit available in material master outbound function module to download the data into file and trigger an event which can call a workflow that by default set the status of the IDoc to not to be processed 31 or configure new status 28(as IDoc being monitored) and use the workflow to view the material file and release the IDoc if OK by resetting the status to 30 or mark it for deletion or as error by setting it to 31.
Sirish

Exchange rate error in Material Master Upload (MB1C - 561)

Hi.
While uploading material through MB1C with movement type 561, I am getting following error
My company code currency, material master currency is EUR but still following error is occuring.
"Enter rate EUR / rate type M for 01.10.2010 in the system settings
Message no. SG105
Diagnosis
For the conversion of an amount into another currency, an entry is missing in the currency conversion table.
Procedure
Add the missing entry in the currency conversion table.
Execute function
You can then continue to process the commercial transaction."
Why system is asking to maintain exchange rate for same currency?
What are the settings that I should maintain? Thanks in advance.
Regards
Anand

Hi,
My material master currency is EUR
Both Stock and Upload GL accounts currency is EUR
Co COde currency is EUR
Where else is the revevant Settings?
Further, I uploaded one material on 25/Oct/2010 well. But when I am trying to upload the same material again on or before or after
25/Oct/2010 system is giving exchage rate error
What could be the remedy?
Regards
Anand

Dump Error In Material Master Transaction

Dear Experts,
When i am creating or changing any material master record, i am getting the below dump error while saving the material.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLC1F2" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program "SAPLC1AX " in include "%_CESPCL
     " in
    line 77:
    "Component called ATWRT already exists. ."
    The include has been created and last changed by:
    Created by: "SAP "
    Last changed by: "SAP "
    Error in the ABAP Application Program
    The current ABAP program "SAPLC1F2" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    The following syntax error was found in the program SAPLC1AX :
    "Component called ATWRT already exists. ."
Trigger Location of Runtime Error
    Program                                 SAPLC1F2
    Include                                 LC1F2U10
    Row                                     594
    Module type                             (FUNCTION)
    Module Name                             C1F2_SUBSTANCES_SAVE_TO_DB
Can you please help me out with this?
Thanks,
Praveen

Hi,
I have not made any changes in the Enhancements/BADIS which are related to ATWRT, but created one ZTable for linking the
Vendor (LIFNR), Material (MATNR) & Manufacturer (ATWRT).
Here are the additional details of the dump which i am getting in MM01/MM02 transactions for your reference.
Moderator message - Please respect the 5,000 character maximum when posting. Post only the relevant portions of the dump
Can you please help me with this?
Thanks,
Praveen
Edited by: Rob Burbank on Feb 2, 2011 9:29 AM

ERROR IN Material Master Generation (AII 4.0)

Hi all,
We're working with Auto ID 4.0..
When we try to create products from R3 ECC 5.0 we find errors, the message is well sent from R3 to XI and then to AII but when the proxy is executed is thrown an ABAP exception.
These are our errors:
Data cannot be maintained for set type COMM_PR_UNIT
Data cannot be maintained for set type COMM_PR_SHTEXT
Data cannot be maintained for set type COMM_PR_GTIN
We've done the configuration on AII about hierarchy 'AIN_BASE' and category 'AIN_MATERIAL'...
Do we miss anything??? Please help us..
Thanks in advance

Hi
we are trying to send material master data from ERP to SAp AII system through XI. I have seen in the integration repository there are standars interface mapping and mesage mapping exists. But not clear on how to do configuration in XI nd which adapter we need to use in reciever communication channel and also the setting nede to be done in AII
can you please help me in this? Just give me the breif description of steps that need to be followed in ERP side SAP AII side and Xi side
thanks

Error in Material Master

I am getting an error while viewing in mm03 Sales:Sales Organixation Data The error is "No plant-specific data exists"
Please suggest what could be possible error in maintaining the material master and necessary corrective steps.
Thanks
Praveen

The error is self explainatory "No plant-specific data exists"
Go to mm01 & maintain the date for the organizational levels you are tyying to view:
Plant
Sales Org.
Distr. Chann

WF - Error in Material Master extension

Hello friends
I have some changes to the coding(in ABAP not BOR) related to a workflow of Material Master creation and extension, there is a Z table from where it picks the profit centre to create and extend materials.
When Profit centre is there for a plant, the workflow executes without error but when profit centre is not there then workflow is not executed, it gives the following error.
ROLLBACK WORK executed (SWP_CALLBACK_WI_DONE item 8)
ROLLBACK WORK executed (SWP_CONTINUE_WITH_NEXT_NODES item 1)
stating that it could not find agents.
I have checked in MM01 Profit centre is not a obligatory field and neither is there any check in coding for the same.
I have no idea what to do, please guide.
Thanks
Bhavna

Dear Bhavna,
Please check if you are validating Profit Center before calling agent determination. It appears that Agent Determination is linked with Profit Center.
Hope this is helpful.
Regards,
Naveen.

EAN error in material master

Hi Everyone,
We have an issue with International Article Number (EAN/UPC) being enetered in the material master.
When the user enters particular EAN he gets an error which says "The EAN # may not be assigned externally"
Message no. WE216.
I have checked the config & it is ok. The EAN Number entered is well within the number range assigned to the particular EAN category.
I also did a config check as per SAP note 879460 & corrected it in test sever, but still the error persists.
Any suggestion on what may be wrong.
Thanks.
Akshay

unfortunatly you did not post the EAN, as the number itself could explain some errors.
Read OSS Note 545520 - FAQ: International Article Number (EAN/UPC)
but the error itself explains already that you enter something manual, were SAP expects no manual entry.
is your number range an external or internal number range?
Edited by: Jürgen L. on Jan 11, 2011 11:16 PM

Material master download

Hi all,
I read the help.sap.com and found that all materials information (classes, characterisctics and characteristic values) can be downloaded via the adapter object SCE if a knowledge base object and its run-time version is created in R/3.
Has anyone downloaded the information via adapter object SCE.
Also from the documentation in R/3, I found that characteristics in R/3 is equivalent as attributes in CRM. Now if characteristics in R/3 if downloaded via SCE object will the characteristics appear automatically as attributes in COMMPR01 Transaction.
Or
These characteristics will appear only in PME tool only.
Could somebody help me in this. Any help will be highly appreciated.
Thanks in advance
Middleware developer

Hi Jothi,
Referring to your question, use PME when only create
the configurable product in CRM. From my experience,
I don't use it when downloading configurable product
from R/3.
Hope this answer your question.
Cheers,
Gun.

Error Loading Material Master Data

Hi All, When I try to load ZMATERIAL in BW development. I am getting the below error. I am on BI 7.0. seems like bad data, but how to fix it?? any thoughts??
in the details TAB of the monitor, I get a red error message under
'Transfer (IDocs and TRFC): Errors occurred '
>>Processing (data packet): Errors occurred
>>>Data Package 5 ( 10417 Records ) : Errors occurred
>>>>Update ( 0 new / 0 changed ) : Errors occurred
>>>>>Data records for package 5 selected in PSA - 1 error(s)
>>>>>>ZMATERIAL : Data record 10416 ('000001 '): Version '000001 ' is not valid
>>>Processing end : Errors occurred
>>>>>Error 4 in the update

Hi PK,
i can give you some indications:
This message indicate that in R/3 you have an incorrect value and the data record indicate the key with The important information.
When controlling the InfoObject and the transfer rule you can extract the info that you need to correct the data i think in your case you have to check the length and the character type between your infoobject in BW and the field table in R/3.
transaction RSA1==> Infosource==> find your Infosource==> double click on your Infosource that take you to transfer rules==> and here you can check the mapping between your infoobject (ZMATERIAL) and the original field in R/3 that you have to correct.
in the same screen under Transfer_structure/transfer_rules you can find the name of the datasource and in R/3 transaction RSO2 you can find the original table that contain the field to correct.
when you individualize the table and the field communicate this Info to the persons who works on R/3 and after they correct the data reload again in BW.
i hope that this Info help you
Bilal

LSMW error in material master classification uploading

Hi,
I'm uploading classification for materials by LSMW with a direct input
but at the end of the uploading process I can read the following:
Error Changing Classification Data
Other
( CLAP_DDB_UPDATE_CLASSIFICATION: exception 3 )
The Following File Was Created with the Error Records:
RCCLBI03.ERROR
How Can I find a list of all the exceptions ?
Thanks!
Best Regards

CLAP_DDB_UPDATE_CLASSIFICATION is a function module. which is called from the batch input program RCCLBI03 that you have in your LSMW step1.
so you can go to SE37, enter CLAP_DDB_UPDATE_CLASSIFICATION and either read the docu or directly display the FM, therein is a tab for exceptions, just count starting from top
the third is classtype not defined

How to maintain material master data in plant....

Hi all,
while creating BOM I am getting an error "no material master data in plant' can some one help me how to maintain the material master data in plant
Regards,
Balu

Hi,
Please check the below link for MMR creaion .
http://web.mit.edu/sapr3/windocs/bpmdb01m.htm
Regards,

How to maintain the material master data in plant

Hi all,
while creating BOM I am getting an error "no material master data in plant' can some one help me how to maintain the material master data in plant
Regards,
Balu

Check the material available in MARC table in SE11 transaction against your plant.If it is not available please maintain through MM01 transaction.

Error while creatting the Material Master IDOC in ERP 2005

Hello All,
I am trying to create scenario from RFID-Enabled Outbound Processing - Conf Guide (SAP AII 4.0).
I am using Auto ID 4.0 on a NW04s system. The backend is a ERP2005 system.
The scenario requires that I need to create a material in the backend and send it to the NW04s system using IDOCs.
After completing the configuration on the backend, I tried sending the Material Master IDOC to Auto ID from the transaction AIDMM. I get a message that IDOC is just being created. But I could not find it in the transaction WE02.
On debugging I found that the function MARD_GENERIC_READ_MATNR_PLANT resulted in error.
Thanks for any kind of input.
Regards,
Rahul
Message was edited by:
Rahul Gavande

Dear,
Check ABAPer for file settings.
- CANNOT_SKIP_ATTRIBUTE_RECORD : The attributes could not be read in the EPS parcel. The file cannot be opened for reading, because it may have been deleted in the meantime.
- CANNOT_DETERMINE_EPS_PARCEL : The EPS parcel is not in the EPS Inbox, because it may have been deleted. You must download the relevant patch again (for example, Hot Package).
- CANNOT_DETERMINE_DATA_FILES : The name of a data file could not be determined, because a profile parameter was not correctly configured. Check the settings using the report RSPARAM.
- CANNOT_DISASSEMBLE_R_DATA_FILE : An R3trans data file could not be unpacked. A possible error source is that the relevant EPS parcel was not found. The data file could not be opened for writing. An error occurred when transmitting a 20K block from the EPS Inbox to the directory /usr/sap/trans/data (UNIX).
- CANNOT_DISASSEMBLE_D_DATA_FILE : An ADO data file could not be unpacked. The reasons are the same as with the message CANNOT_DISASSEMBLE_R_DATA_FILE .
- CANNOT_CREATE_COFILE : The cofile could not be created from the relevant data file. One possible error source is that <sys>adm does not have write authorization for the directory /usr/sap/trans/cofiles (UNIX).
Check Note: 70752.
Regards,
Syed Hussain.

Error in Material Master download

Similar Messages

Maybe you are looking for