Error in MDDataSetBW.GetCellData when Scheduling

Dear Experts,
We have a Web Intelligence report that refreshes in the Rich Client without a problem. If we try to schedule this report, we receive the following error message.
A database error occurred. The database error text is: Error in MDDataSetBW.GetCellData. FUNCTION_NOT_FOUND. (WIS 10901)
I've read the related SAP Note that says this is due to large data volumes, but it refreshes in the Rich Client fine. We've also restricted the WebI queries as much as we can and the underlying BEx query is also heavily restricted.
We're running BOE 3.1 SP2.
Any help to solve this problem will be massively appreciated,
Andrew

Hi Andrew,
Think is not million of records if cells if you have 10 dimensions and 100.000 records you will have this problem, because is million of cells.
How many dimension do you have in the query panel?
Other issue that I had with similar error number was related to LOV, and I solved this procedure:
1. check your Web Intelligence Processing Servers are enabled and running?
2. Does the user have the appropriate rights to the universe and connection underlying the report?
3. Do an integrity check on the Universe and resolve all cardinality issues from the migration.
Once all the integrity issues were resolved and the LOV's recreated u2013try to re-export the Universe, which will resolve the WIS errors.
4. check you have the Universes existing in the correct universe folders.
5. And also check the disk space.
Best regards,
praveen

Similar Messages

  • Error in MDDataSetBW.GetCellData for WebI report on SAP BW

    Hello All,
    I am getting below error when running a WebI report (BOBJ XI SP3) on top of a universe built on a SAP BW BEx Query (SAP BW 7.01 Level 0007).
    "A database error occured. The database error text is: Error in MDDataSetBW.GetCellData.  Please enter a valid value for characteristic ZPRODCODE.. (WIS 10901)"
    I observed that
    1. Error is coming only with more number of restrictions in selection criteria.Without those selections ( as they are optional prompts ) data is coming properly with all 950 records.  So as mentioned in old threads huge data is not an issue here
    2. Error is coming only when data is not available in cube for the given selection criteria after taking long time.
    Any idea why error is coming instead of report throwing No Data to retreive.
    Vamsi Ch

    Hi,
    There are couple of threads around this issue. Go through the below links and hope you might get the proper info.
    error MDDataSetBW.GetCellData
    Error in MDDataSetBW.GetCellData (WIS 10901)
    Webi throwing error MDDataSetBW.GetCellData
    Re: Error in MDDataSetBW.GetCellData
    -Noor.

  • Error in MDDataSetBW.GetCellData. Unknow error (WIS 10901)

    Hello to Everybody,
    We are working with Business Objects EDGE series XI 3.0 and SAP BW 3.5. We work over Financial Infocubes.  Our problem appears when we try to refresh a Profit & (Loss) (CO-PA Query) with more than two periods of time.  If we work with one or two periods everything works perfect.
    The error:
    Error in MDDataSetBW.GetCellData. Unknow error (WIS 10901)
    Could someone help us?
    Thanks on advance,
    Martí

    Hi Marti,
    could you provide the details on the elements that you included into the query panel for the Web Intelligence report and which items are being used in the report ?
    Can you execute a BI query that looks the same meaning that all elements from the web Intelligence query panel need to be in the rows or columns.
    thanks
    ingo

  • Error in MDDataSetBW.GetCellData

    Hi Expert -  I got this error message while running any webi report.
    "A database error occurred.  The database error text is:  Error in MDDataSetBW.GetCellData.  See RFC trace file or SAP system log for more details. (WIS 10901)"
    How can i see - RFC trace file
    or from where in sap system i will get more details -  SAP system log for more details
    Any clue to solve this issue ?
    - the number of record are not much , just 10 - 20 recotrds , still i am getting this error.
    Please help.

    Hi Ingo i have tried to implement the note - 1260004 as you suggested , but in my registry files i am not able to see -
    HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 12.0\MDA\Log\Modules\APIMODULE\
    HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 12.0\MDA\Log\Modules\APIMODULE\Components\INFO
    I am on BO 3.1 at Sp-2 and BW  - SAPKW70105
    Why the bo server does have these paths.
    Also We are another Bo server of 3.1 sp-2 , When i see the registry there is no  entry like - HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects
    How come this possible.
    Thanks
    Edited by: rohan1103 on Feb 10, 2010 9:04 PM

  • Database error: Error in MDDataSetBW.GetCellData. Error executing physical plan: AttributeEngine: no 6952. (IES 10901)

    Hi All,
    I'm getting below error when running a webi report in 4.1.
    Could you please let me know why and what to do for this error?
    Also let me know if any more info required.
    Error Message:
    Database error: Error in MDDataSetBW.GetCellData. Error executing physical plan: AttributeEngine: no 6952. (IES 10901)
    Thanks & Regards,
    Karthick.

    Are you seeing this error for every report? or just for this report? Looks like it is DB error. Contact your DBAs

  • Error in MDDataSetBW.GetCellData.Please enter a valid value for character

    Hi All,
    We have a mandotory prompt on 0FISCPER for Web I Report . The promt is present in the universe.
    The query works fine in Dev , but in Quality it shows the following error
    A database error occured. The database error text is: Error in MDDataSetBW.GetCellData.  Please enter a valid value for characteristic 0FISCPER.. (WIS 10901)
    The universe is on BW Query and the BW Query works fine.
    Can someone please help on this

    Thanks Sathish for your input.
    We have created report level prompts and facing this issue because  we were selecting multiple values for prompts.
    Its working fine for single selection. Is there any way to  enable multi selection for the particular object at the BW end ?
    Or else we have to create the prompts (Single selection) at the universe level.
    Regards,
    Pranay

  • Error in MDDataSetBW.GetCellData (WIS 10901)

    Does anyone have any idea about the following error in Webi? This happens using SAP BI based universes.
    A database error occured. The database error text is: Error in MDDataSetBW.GetCellData.  No more storage space available for extending an internal table.. (WIS 10901)
    Thanks,
    Kahif

    Hi,
    can you trace the workflow according to these notes:
    Tracing:
    Unix : Note 1235111
    Windows : Note 1260004
    and then post a link to download the logfiles here
    ingo

  • Getting WEBi Error ": MDdatasetBW.Getcelldata"

    Hi Gurus,
    When I am running a WEBi report which is built on top of SAP BW query, I am getting error "
    Database erro : the error is MDdatasetBW.Getcelldata. Unknown error (WIS 10901).
    This is an ADHOC query in SAP BW that drills down to the very detail level.
    Any advise is really appreciated.
    Thanks,
    Aruna..

    Hi Ingo, here is the info..
    BO XI 3.1
    Windows server Enterprise 2003 SP2
    SAP BI SAP Netweaver BI 7.0, Release 700 Level 18 SAPKW70018
    Yes. I agree that there is not concept of free chars in BO.
    In real scenario how I do run a query in BO  with all these chars. In BW becuase of the free chrs concept , we can drag the free chars dynamically at run time. How do I get this kind of report run in BO. If I add all chars , It is timing out.
    Please advise.
    Aruna..

  • WebI Report using YTD expression causes MDDataSetBW.GetCellData error

    Hello everyone
    We are using BusinessObjects XI 3.1 FP 1.8 on OS AIX 5.3 and we are obtaining information from SAP BI 7.0 Patch Level 19. We are using the Integration Kit for SAP Solutions.
    We are developing a report in which we are trying to create a Year to Date cumulative ratio in a universe connected to a BI multiprovider, we are using the next expression:
    <EXPRESSION>SUM(YTD(@Select(RatiosNúmero de Equipos Instalados)))</EXPRESSION>
    When we check the integrity and grammar in the universe is  OK.
    But if we export the universe and try to use the variable in the WebIntelligence report, we got the next error:
    u201CAn error in the database was produced. The database error text is: Error of MDDataSetBW.GetCellData. (WIS 10901)u201D
    Thanks in advance for your help!
    Edited by: Azucena de los Angeles Coronel Castañeda on Oct 8, 2009 11:00 AM

    Hi,
    whats the exepcted data volume ?
    how may elements did you include into the Web Intelligence Query Panel ?
    Ingo

  • Error MDDataSetBW.GetCellData on Qaaws if BEx Query contains a structure

    Hi everybody!
    I'm getting an error every time I executy a query on a universe based on a BEx query which contains a structure. This query works good if it carries data, but when no data is returned I get the following error:
    Error in MDDataSetBW.GetCellData.
    By the way testing the MDX in MDXTEST it display no errors, only the empty dataset.
    After doing a few tests I can assume this issue is related to the use of a structure in the query.
    Have you got any solutions/suggestions please?
    Thanks

    Ciao Roberto,
    thank you very much. Actually I wasn't using the "xml document" mode in MDXTEST, and switching to that analysis I've got this message: "Object MEASURE 0 not found". But the MDX is like this:
    SELECT  { [D9S9GS5IZK94F9FA2E29EF6DU].[D9S9GS5IZK9W3VR1DXHVGUKNM] }  ON COLUMNS , NON EMPTY CROSSJOIN( CROSSJOIN( CROSSJOIN(  { [0CALYEAR].[2010], [0CALYEAR].[2011] } , [D9S8VDQFWXBZTTTIT5KETFV2Q].MEMBERS ), [0VTYPE].[LEVEL01].MEMBERS ), [0PLANT].[LEVEL00].MEMBERS ) DIMENSION PROPERTIES MEMBER_CAPTION, [0VTYPE].[20VTYPE] ON ROWS FROM [ZCEMPBC/ZCEM_GENERAL_YTD] SAP VARIABLES [!V000001] INCLUDING [ZBUSINESS].[GCEM] [!V000002] INCLUDING [0COUNTRY].[DK] [ZCUR_SEL] INCLUDING 1
    So, I don't understand that message. What "MEASURE 0" stands for?
    Thanks.

  • Webi throwing error MDDataSetBW.GetCellData

    Hi,
    I am creating a webi based on Bex Query.
    In Bex Query, I have 6 characteristics , 4 Key figures , all 6 char in Default values block too and 1 charcteristic (Plant) in Characterisic restriction block which is authorizing variable.
    1) When i am creating a webi using above dimensions....i am able to run the report with plant as a optional prompt in the report when i supply any values to which the user is authorized. But when i do not supply any value it throws the error instead the report should show the data for all Plants.
    A database error occured.The database error text is: Error in MDDataSetBW.GetCellData.
    2) When i put all the available values in the promt for Plant, then also i receive an error
         A database error occured.The database error text is: Error in MDDataSetBW.GetCellData. FUNCTION_NOT_FOUND. WIS(10901)
    The below versions and patch level is being used:
    SAP BusinessObjects Edge BI Standard Package XI 3.1
    SAP NetWeaver BI 7.0 , BW Support Package 19
    Please Help!!!
    Regards,
    Akhil

    Hi All,
    I also found the same error message, but there is no problem with the authorization.
    I run the query in MDXTEST and it's work fine. In BexQuery also can show the data.
    But when I try to run the query from QAAWS or Web Intelligence,
    it's show the same error message:
    A database error occured. The database error text is: Error in MDDataSetBW.GetCellData. FUNCTION_NOT_FOUND. (WIS 10901)
    My SAP BO version XI 3.1 and SAP Netweaver BI 7.0.
    Need help,
    Thanks and regards,
    Henki Chen

  • BW-WebI Report: MDDataSetBW.GetCellData.  System error in program

    Hi,
    I'm trying to run a WebIntelligence Report connected with BW Query but return error before showing the results.
    The error is:
    Error in MDDataSetBW.GetCellData.  System error in program CL_RSDRC_MULTIPROV and form SETRESOLVE-01- (consid.TxtDescrit.). (WIS 10901)
    My query in BO contain 8 dimensions and 2 measures.
    Someone has been there?
    Tks!
    Edited by: Peeter Cassiano Antunes Bonomo on Sep 6, 2011 7:33 PM

    Ingo,
    running the query in RSRT with the same elements works perfectly.The results are displayed.
    But tested the MDX query in the transaction MDXTest and entered in the ABAP Debugger, press F8 and the following message appeared:
    "The current application triggered a termination with a short dump".
    "The current application program detected a situation which really should not occur. Therefore, a termination with a short dump was triggered on purpose by the key word MESSAGE (type x)."
    "Short text of error message:
    System error in program SAPLRRK0 and form CHECK_KHANDLE (consid.TxtDescrit)."
    Does that help?
    Tks,
    Edited by: Peeter Cassiano Antunes Bonomo on Sep 9, 2011 3:18 PM

  • BO on top of SAP BI 7.0 - MDDataSetBW.GetCellData

    Hi,
    We have created a Universe (BO 3.0) on top of a BI 7.0 Query.
    We got the below error when we tried to execute the query from Web I:
    A database error occured. The database error text is: Error in MDDataSetBW.GetCellData.  See RFC trace file or SAP system log for more details. (WIS 10901)
    We selected only 2 objects in web I query panel. If we select each objects separately, it works fine.
    The data should be around 200K rows.
    When we tried to run this in BEX we got the error - "No more storage space available for extending an internal table".
    Please let us know if someone solved this issue.
    Thanks
    Jai

    Hi Ingo,
    we're facing similiar problems and my basis admin tells me that he already expand the ABAP memory alocation using 70% of the physical memory, also we have Enhancement Package 1 installed, but we're still facing the same error message.
    FYI, the BO server uses 8 GB of RAM and 8 core processor, the SAP BW server uses 16 GB of RAM and 8 core processor. We want to analyze 3 years of daily data from highest hierarchi down to the details. We have 3 hierarchies :
    1. Sales : sales organization - sales office - distribution channel - customer group - sold to party
    2. Material : material group 1 - material group 2 - material group 3 - material
    3. Time : year - guarter - month - day
    so far we are able to query only 1 week of data using webi and that generates 900+ webi report pages. the total rows of whole data is roughly 12 million rows. any suggestions?
    Thx

  • Webi - MDDataSetBW.GetCellData

    Dear master,
    I created an Universe based on BEx query.
    In Webi, I select 3 objects [one structure, 0CALMONTH, one measure] and view the report with parameter range of 0CALMONTH.
    I inserted the variable value as following:
    start range: 11.2010
    End range: 11.2010
    When I attempted to preview the query, an error appeared as following:
    A database error occured. The database error text is: Error in MDDataSetBW.GetCellData.  See RFC trace file or SAP system log for more details. (WIS 10901)
    When i changed the start range to 06.2010, the error has rip-off immediately....
    Based on the scenario above, the error message only prompt when there was no data exists in BW system. Example 11.2010 has no data in BW system.
    How to resolve this? Thanks in advance.
    Regards,
    KS

    Hi Ingo,
    Sorry, I should change the topic title to Xcelsius.
    I created a new query via "Query As A Web  Service" client tool. Then I copied the URL.
    Inside xcelsius's data manager, there are a few options from the list for adding a new connection. Then I select "Query As A Web Service" and paste the URL and do the other necessary. When I preview the report, I get the error MDDataSetBW.GetCellData.
    After that I changed the data connection to "Web Service Connection" and paste the URL and do the other necessary. The error of MDDataSetBW.GetCellData has never shown up again.
    I'm not sure why QAAWS data connection on Xcelsius doesn't work.

  • Error at SAP BO when containing no data in SAP BI Query

    Dear all,
    I found this error message when I tried to open my dashboard reports:
    "A database error occured. The database error text is: Error in MDDataSetBW.GetCellData. FUNCTION_NOT_FOUND. (WIS 10901)"
    This error only show when the first time I opened the reports and the data is empty. After I clikc Ok and re-run the report, it's ok. If the query contains the data, the error will not show.
    Please advise or give some suggestion for tihs problems.
    I'm using SAP BW 7.0 SP 21 and SAP BusinessObject XI 3.1
    Thanks and best regards,
    Henki Chen

    Hello Henri,
    He is the resolution to your problem:
    1.  Restrict query results to a smaller set of data.
    2.  Suppress the 'Not assigned/#' Hierarchy node (Exclude Selection) in the BEx hierarchy query. This reduces the size of I-Table & buffer requirements.
    3.  Avoid use of 'default values' for hierarchy & hierarchy node variables. Or, if a default must be assigned, set it to an attribute that has 0 levels.
    4.  Implement : Enhancement Pack 1 + Support Package 3 (or above) for optimized interoperability between BusinessObjects & SAP modules. 
    Thank you,
    Scott

Maybe you are looking for

  • Can't find events created in iMovie 11?

    Hello, I have a bunch of events stored on external drive created with iMovie 11. When I open FCPX and navigate to the drive it tells me no events exist. Any ideas or help very much appreciated! (I really don't want to import all the footage again!)

  • Why wont my new contacts save to my contacts list?

    why wont my new contacts save to contact list?

  • How to use outer join to display the results

    I want to develop a report in which the column sequence will be as follows: 1)Item_code 2)Item_name 3)Stock 4)Pending 5)Re-order Level 6)Item_reorder_qty I had written the query, but the problem is all the products does not get displayed. The product

  • How to disable the guest login in OBIEE 11g?

    Hi, Whenever i click on analytics link, Guest automatically logs in , then i have to logout in order for the user to log in. How do we disable this Guest login? Thanks Ashish

  • When will iOS7 be released?

    I don't know when will iOS7 will be released. And I want to know when. Also, I want to know how I install iOS 7 on my iPhone 4S once it comes out.