Error in merge modules CR XI R2?

Hi,
    I downloads for two times the "merge modules" for Crystal Report XI R2 and I would like to know if in the files: CrystalReports11_5_RDC_Reportengine.msm and CrystalReports11_5_RDC_License.msm, is there any error when was created.
I receive an error message when I try to open this files, but I can open correctly the files: CrystalReports11_5_RDC_Designtime.msm and CrystalReports11_5_RDC_Runtime.msm   
Somebody knows if is this possible?
Thanks for all and best regards to all,
Antonio.

There was a release that was corrupt when it was uploaded to our FTP site. Issue has been resolved.

Similar Messages

  • Merge Module not work at target machine

    Post Author: soky
    CA Forum: Other
    Hi all,
    I cannot deploy my RDC delphi application. This is very simple app, for trying base of using of rdc. Only one TApplication and a TCrystalActiveXReportViewer component on a form. Run nicely on developing machine. But the deploy drive me crazy
    Product: Crystal Reports Developer
    Version: 11.0.0.1282
    Patches Applied: 0
    Operating System(s):
      Developer: Windows XP home english
      Target: Windows 2000 5.00.2195 SP4 hungarian (version of msi.dll=2.0.2600.1183)
    I using InstallShield Express Borland Limited Edition. The build of release successfully with zero error, including merge modul CR11_rdc_runtime. But install broken the following error message:
    Internal Error 25001. 1615:
    RegistrationCosting::CostAllISSelfRegEntries::MsiDatabaseOpenView(hDatabase,_T("Select * from ISSelfReg"),hVieew)
    How can I make usable install stuff with this tools?
    Thanks, soky

    Can somebody tell me where I can find the log that will tell me whats going on with this module at startup.
    You say the module gets loaded, as does lsmod. So there will be no error message, as the system thinks the module is working(which it probably is). The reason your wireless is not working may be another issue. In order for some things to work correctly certain things need be loaded before other things can access them.
    anyway, all error logs are in /var/log, shouldn't take you long to look through them. They are dated.

  • Crystal Reports XI Merge Module Error

    Hi,
    I am attempting to create an installer that uses the latest (CRXIWIN_SP4) Crystal Reports XI merge module (CrystalReports11_RDC_Reportengine.msm).
    When the installer is run an error often occurs (it only occurs on some machines and I have so far be unable to find a pattern as to which machines it fails on):
    Error 1904.Module C:|Program Files\Busines Objects\BusinessObjects Entrprise 11\win32_x86\plugins\auth\secLDAP\secldap.dll failed to register. HRESULT -2147024770.
    The dll in question (secldap.dll) is present on the machine at the point where the error occurs, but further inspection seems to indicate that a dependency is missing (though it's not clear what dependency).
    The readme file supplied with the merge modules would seem to suggest that this is a defect in the merge module that has been fixed (ADAPT00409449).
    Any help to sort this out would be much appreciated as I've run out of ideas!
    Many thanks,
    Simon Clarke.

    Please post this query to the Legacy Application Development SDKs  forum:
    SAP Crystal Reports - Legacy SDKs
    That forum is monitored by qualified technicians and you will get a faster response there.
    Thank you for your understanding,
    Ludek

  • Error while installing runtime with merge modules

    Hello,
    We are creating a custom installer for our application, and so considered using the merge modules provided by NI.
    All the dependencies are OK, and the .msi (which contains only the merge modules, since the global installer is created by NSIS) is created by WiX.
    The error occurs at installation of the msi, the log file says :
    NIMURegPartInfo: Starting action...
    NIMURegPartInfo: About to get properties
    UpgradeCodeError - (null) must have a value - exiting.
    Looking at the msi file in Orca, I can see that the table "UpgradeCode" is empty, so I suppose that this why I get the error.
    How do I fill this table?
    Thanks a lot
    Charles Brossollet

    Hello,
    This is an issue with how Wix and InstallShield generate MSIs that we had not run into in the past.  They basically do not generate the tables inside the MSI if they are not used.  Therefore, we are querying MSI for information from the Upgrade table and there is not one, so MSI returns a fatal error.
    There are 2 workarounds. I would suggest the first.
    1. Generate a Upgrade table entry and have your MSI installer be upgradable.
    2. Open your MSI and comment out the entry in the InstallExecute sequence table for NIMUPersistPartRegInfo (commenting out in MSI means to set the Condition to 0).
    If you have questions about using the upgrade table  go here:
    http://windowssdk.msdn.microsoft.com/library/default.asp?url=/library/en-us/msi/setup/upgrade_table....
    Regards,
    Jeff
    NI

  • Deploying Crystal Reports runtime using merge module failed

    Hi,
    I am having a problem when deploying Crystal Reports using merge module runtime, included into MS Visual Studio web setup project, when installing my *.msi with CR runtime on a completely clean PC (with only MS Windows installed). Error: Failed to register one of the Crystal Reportsu2019 *.dll because it could not find Microsoft visual C++ runtime (msvcr71.dll was not in Windows\System32 folder)
    I am using Crystal Reports runtime merge modules, which I downloaded from here: https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm
    I tried both cr120_mm.zip (Crystal Reports 2008) and cr121_mm.zip (Crystal Reports 2008 SP1)
    cr120 could not find msvcr71.dll, cr121 could not find msvcp80.dll.
    Steps to reproduce:
    -          In MS Visual Studio 2008 create a new empty Web Setup Project.
    -          Add Crystal Reports merge module CRRuntime_12_0.msm or CRRuntime_12_1.msm
    -          Build *.msi
    -          Try to install this *.msi on a completely clean PC. I tried it on Windows Server 2003 R2 SP3, which did not have msvcr71.dll or msvcp80.dll files in C:\Windows\System32 or in any other PATH folders.
    -          During installation there is an error u2013 failed to register one of the Crystal Reportsu2019 *.dll
    I am looking forward to hear from you.
    Thank you.

    I believe these threads have the answer for you:
    https://forums.sdn.sap.com/click.jspa?searchID=19475295&messageID=6558989
    https://forums.sdn.sap.com/click.jspa?searchID=19475295&messageID=6559113
    Ludek

  • Crystal Reports 2008 Merge Modules SP1 Fails when installing Wise 7.0

    Hello all,
    We are packaging our software solution .NET 2.0 Visual Studio 2008, with Wise Studio 7.0 using Crystal Reports 2008 Merge Modules (SP1). (We use CR2008 for reporting)
    There is a point (fix service) in the installation when an error message appears saying, " cannot register Businessobjects.enterprise.sdk cannot be register because of dependencies.
    We have tried installing in a XP, a Windows 2003 Server, and Vista. The three of them with the same error.
    Any ideas???
    Thank in advance.
    Adrián.-

    I believe this thread will help:
    warnings on build with CRRunTime_12_1.msm
    Ludek

  • Crystal Report XI R2 merge modules install Enterprise components... Why?

    I am in charge of creating the runtime component insallation (we are using the RDC) and have used the merge modules for Crystal Reports XI R2 to create a msi package for installation. I used the Microsoft Visual Studio Installer for the creation of the msi. The installer seems to be adding some Business Objects Enterprise 11.5 components which is causing some of our users Enterprise 10 to stop working... It also seems that if they unregister the EnterpriseFramework.dll and register the same file associated with Enterprise 10, they are able to run with some minor issues (like colors not there, etc.).
    The question I have; Is there a particular reason these Business Objects Enterprise 11.5 components NEED to be installed? If not, is there a way to keep them from being included in my installation package?
    Any help is appreciated, I have been searching for similar issues on this for a couple days now and have found absolutely nothing of any help.

    Maybe we need to back up a little bit. When you say:
    Enterprise 10 to stop working...
    What does that mean? What actually happens? Errors, behavior, etc?
    Next:
    At this point what would my options be for this issue (remove files from merge module)?
    - I am not sure that removing the EnterpriseFramework.dll would be the way to go. Presumably the dll is htere because it is needed by the RDC(?). BTW., this is the only DLL with Enterprise in it that I see in the msm files.
    Would this be a bug related to the merge modules, or are these files supposed to be included?
    - Not sure, but the dll is installed into this directory: c:\program files\business objects\businessobjects enterprise 11.5\win32_x86. And it is a COM dll, so CE 10 should not even know that this dll is there. One good way to check is to use regsvr32 /u and unregister the EnterpriseFramework.dll. See if the CE 10 install starts to work now. You may want to re-register the EnterpriseFramework.dll of version 10.
    Ludek

  • Merge Module Problem - I think!!

    I had tried the trail version of Crystal Reports XI and was able to make it work in my applications just fine.  Now that I have purchased the product I have had nothing but trouble.  I can not get it to work even with the previous application that I had it working in.
    I have a Microsoft Visual Studio 2005 Visual Basic Windows application.  I have referenced the CrystalDecisions. CrystalReports.Engine, ReportSource, Shared, Windows.Forms.  I have also referenced BusinessOffice.Enterprise.BIAR.  I have created a setup application and it has detected the dependicies and included the merge modules.  I have tried it using different downloaded merge modules and it still does not work.  The error I get when I am trying to install the application is as follows:
    An error occurred during the installation of assembly 'BusinessObjects.Enterprise.Desktop.Agnostic.dll,Version= "11.5.3300.0",Culture="neutral",PublicKey Token="692fbea5521e1304"
    If anyone knows what direction to point me in on this one I would really appreciate it.  I need to move on with this application!

    Hi, I've had a similar problem in a project built in Visual Studio 2003, using Crystal Reports 10. I determined that on our build machine, the project was not being built with the right version of the referenced dependency: CrystalDecisions.Windows.Forms. In our case, at compile time, the build machine would check the GAC for that file and found the version 9 copy that was available. At runtime, version 9 was not available but version 10 was installed (by design) and we received the same error as you.
    To resolve the error, ensure that you are building using the correct version of your references. By 'correct', I mean use the same version at compile time as will be available at run time.
    I hope that helps! (I realize you posted the question 2 months ago, only stumbled on it now looking for the solution to my own, different, problem)

  • Crystal Reports XI - Where to find the Merge Module and the Install Shield?

    Hi,
    I'm using CR XI with Delphi 2006 and I'm having problems with the client side instalation of the program.They say I have to install the Merge Modules through an Install Shield programs.
    Where to find this and how to use?
    Thanks!

    Hi,
    Install shield is a part of MS Windows not with the BusinessObjects so I was not able to find any BO document on it.
    I have searched over the internet and found some useful links about Install Shield for Windows:
    http://gormanonline.com/blogs/msidle/archive/2008/05/02/basic-introduction-to-installshield-and-windows-installer.aspx
    http://en.wikipedia.org/wiki/InstallShield
    Microsoft Windows includes registry-activated logging services to help diagnose Windows Installer issues. This article describes how to enable this logging service.
    Open the registry with Regedt32.exe and create the following path and keys:
    HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\Installer
    Reg_SZ: Logging
    Value: voicewarmup
    You can use this example:
    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINESOFTWAREPoliciesMicrosoftwindowsInstaller]
    u201CLoggingu201D=u201Dvoicewarmupu201D
    The letters in the value field can be in any order. Each letter turns on a different logging mode. Each letteru2019s actual function is as follows for MSI version 1.1:
    v Verbose output
    o Out-of-disk-space messages
    i Status messages
    c Initial UI parameters
    e All error messages
    w Non-fatal warnings
    a Start up of actionsr Action-specific records
    m Out-of-memory or fatal exit information
    u User requests
    p Terminal properties
    + Append to existing file
    ! Flush each line to the log
    u201Cu201D - Wildcard, log all information except for the v option. To include the v option, specify u201C/lvu201C.
    Once activated, the log files that are generated may be found in your %TEMP% directory.
    Hope this will give you a clarification about Installation Shield for Windows.
    Regards,
    Deepti Bajpai

  • Crystal Reports 12 merge module fails ICE validation during installation

    Hi there,
    I am using the CR 2008 merge module that I downloaded from this site, and am using MSI Factory 2.0 to install my product.  The ICE validation fails during the build with the following errors.
    C:\v9.wxs(6680) : warning LGHT1056 : The Directory table contains a row with primary key(s) 'INSTALLDIR' which cannot be merged from the merge module 'C:\Program Files\Common Files\Merge Modules\CRRuntime_12_0.msm'.  This is likely due to collision of rows with the same primary key(s) (but other different values in other columns) between the database and the merge module.
    C:\v9.wxs(6680) : warning LGHT1056 : The Directory table contains a row with primary key(s) 'ProgramMenuFolder' which cannot be merged from the merge module 'C:\Program Files\Common Files\Merge Modules\CRRuntime_12_0.msm'.  This is likely due to collision of rows with the same primary key(s) (but other different values in other columns) between the database and the merge module.
    C:\v9.wxs(6680) : warning LGHT1056 : The Directory table contains a row with primary key(s) 'CommonAppDataFolder' which cannot be merged from the merge module 'C:\Program Files\Common Files\Merge Modules\CRRuntime_12_0.msm'.  This is likely due to collision of rows with the same primary key(s) (but other different values in other columns) between the database and the merge module.
    C:v9.wxs(6680) : warning LGHT1056 : The Directory table contains a row with primary key(s) 'ProgramFilesFolder' which cannot be merged from the merge module 'C:\Program Files\Common Files\Merge Modules\CRRuntime_12_0.msm'.  This is likely due to collision of rows with the same primary key(s) (but other different values in other columns) between the database and the merge module.
    light.exe : error LGHT0204 : ICE79: Feature 'CMS' referenced in column 'InstallExecuteSequence'.'Condition' of row 'CMSsetupConfiguration.9CED35E4_C9E6_11D3_9833_00A0C9DA4FE9' is invalid.
    Any ideas what this means?
    Thanks,
    Rod

    Hi Falk, thanks for your interest.
    Yes, I can build the setup, but I need to have zero ICE validation warnings in order to pass the Vista Certification process.  It seems to me that the default merge module for CR2008 has been put together in a way that fails best practice - eg.  ICE validation.
    The merge module is simply added to a feature within the installer product, and if I turn on the switch to "Ignore ICE warnings", then the build works OK and I can install the product no problems.  However if I turn off the "Ignore ICE warnings", then the build fails and stops dead.
    The snippet I posted here was from the log file.
    Hope this helps,
    Best regards,
    Rod

  • Crystal Reports XI Release 2 SP4 RDC Merge Module

    I've been trying to find the RDC Merge module for Crystal Reports XI Release 2 SP4 and cannot find it.  I found a link - https://smpdl.sap-ag.de/~sapidp/012002523100009381702008E/crxir2sp4_rdc_mm.zip - but when I navigate there I get an error "Error Message - ObjectID not existant".  Does anyone know where I can get this from?

    I couldnt find the SP4 RDC however there is a crxir2_fp55_rdc_mm.zip released on 06/07/2009, which can be found at
    [https://smpdl.sap-ag.de/~sapidp/012002523100008181452009E/crxir2_fp55_rdc_mm.zip]

  • Problem with the clientinstallation runtime and merge module

    I'm using CR XI SP4 and as a data source I use a XML file that was defined
    with a XSD.
    From my application I generate a XML file and start CR through a Delphi
    component.
    As a parameter I supply a RPT file without data.
    That's all working.
    Now I want to start my application on a client. Therefore I have created a
    MSI file from the 4 Merge files of SP4 and run the installation on the
    client.
    Used merging modules of SP4 :
    1.      CrystalReports11_5_RDC_Designtime.msm
    2.      CrystalReports11_5_RDC_License.msm
    3.      CrystalReports11_5_RDC_Reportengine.msm
    4.      CrystalReports11_5_RDC_Runtime.msm
    Then the program crashes with a Windows error.
    If I save the Data in the report it works. The data ist not up to date then.
    If I install a complete CR XI it works, even when there is no data in the
    report.
    The data ist diplayed correctly.
    What am I doing wrong?
    What do I have to install on the client to make it work?
    Thanks in advance for your quick help.
    Greetings Martin Weißenborn

    Hello Martin,
    Please post this query to the [.NET Development - Crystal Reports|SAP Crystal Reports, version for Visual Studio;  forum:
    That forum is monitored by qualified technicians and you will get a faster response there.
    Also, all Crystal Reports .NET Development queries remain in one place and thus can be easily searched in one place.
    Thanks a lot,
    Falk

  • Crystal 2008 Merge Module SP 2.2 - SP 3.0 Cannot Rebuild Setup Program

    I have a project that did use Crystal Reports 2008 Merge Module sp2.2. We upgraded to Merge Module CR 2008 sp3.0 hoping for speed improvements. So far we cannot even build the setup program. The Installer is referencing CR 2008 sp2.2 AND CR 2008 sp3.0 merge modules now and then generates an error stopping the build process. We have gone through every referenece and even went so far as to delete the sp2.2 merge module. The installer still tries to add it. We have removed and replaced all referneces in the program for Crystal. Still same problem. We have been working with Installshield for 2 weeks on this problem but still no resolution. We had a terrible time figuring out all the dependencies for the CR 2008 sp 2.2 originally and eventually had to pay for Crystal support to even get this to work. I am very surprised at how hard it is to use Crystal Reports in a VB.Net project. Please help.
    Edited by: maintsmart on Jul 8, 2010 1:57 PM
    Edited by: maintsmart on Jul 8, 2010 1:59 PM

    Hi,
    WRT InstallShield, what version of InstallShield do you use and what type of project is it - InstallScript or MSI?  There's an aritcle here on a couple of possible solutions for -5037 http://kb.flexerasoftware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=Q109144&sliceId=
    I've also seen a comment to turn off .NET dependency scanning for the components in the project, and add the components back in manually, to workaround the error.
    For each new release of a Crystal merge module I replace the merge module in the location where the merge modules are held (e.g. C:\Program Files\InstallShield\2010\Objects), and then open my InstallShield MSI project, deselect the merge module in the Redistributables view and then reselect the merge module which refreshes the references to the merge module in the project.  That said moving from CR2.2 to SP3 the merge module filename has changed so for SP3 this will be listed as a seperate Redistributable (or Object in InstallScript), but I've already built a setup using this without any issues, using this method of deselecting / reselecting the merge module.
    WRT the Visual C++ libraries, I have to edit the Crystal merge module to change the ModuleDependency ModuleLanguage to language independant in order for the build to be successfull (as per this lengthy forum posting here 2008 SP1 Merge Modules).  I'm sure you've already gone through all this pain!
    Peter.

  • Having a print problem on a mailing label report using the merge modules.

    Crystal Reports 2008 v 12.1.6.1116
    when I print directly from Crystal Reports designer, the labels print correctly.  If I print the report from our application software using the Crystal merge module, the top of page margin is not the same.
    I am using Crystal Report 2008 Fix Pack 1.5 Merge Modules.
    Any idea what might be causing this ?  I do not see any settings in the CrystalReportViewer that would cause the top of page margin to change.
    Note: We were using a previous version of Crystal Reports, version 11 using the merge modules and it worked just fine. After changing to the 2008 merge modules we are running into this problem.

    Which Version of VS.NET you are using?
           VS 2008 v 9.0.30729.1 SP
    . Which application you are developing desktop or web?
           Desktop
    . Error messages you are facing?
            No error message, just the top of page margin is wrong
    . Are you facing this error in development machine?
           The mailing label report works just fine printing directly from the Crystal Reports 2008 Design application.  However is I try to print the exact same report using the CrystalReportViewer in the merge module, the top of page margin is different.  Basically printing from the designer, there is some spacing at the top of the page, printing in the vb.net app the spacing at the time of is missing.
    . Are you trying to deploy this application?
           Yes
    . Operating System?
            The OS I have tried this on is XP Pro SP3 and also Vista Business SP1
    . How are you deploying your application?
            We build a installshield setup to install the merge modules

  • Merge modules for Business Objects XI service pack 4

    I am in the process of developing a deployment package in Installshield 2009 - Basic MSI Project.  I tried adding the merge modules I downloaded earlier from the web page, http://support.businessobjects.com/downloads/runtime.asp
    Currently I do not see this web page.  It would be nice if you could tell me whether do we have a merge module for Crystal Reports XI service pack 4.  If we have where from i can download them.  Thank you

    Thanks a lot for the immediate response.  However, I am not using the crystal reports Version, R2 release.
    I had actually installed Business Object XI and applied service pack 4 on it.  I checked the version in Help->About. It is 11.0.0.  
    Also my environment is XP Sp2, Visual studio 2003 and Visual studio 6.0.  I understand that R2 release is needed if the environment is Visual Studio 2005.
    I would like to give a clear picture of the issue I work through.    
    After deploying the software in the client machine, I came to know that  when client tried to print the embedded crystal report (.dsr file) from CrViewer, 
    1. Page set-up dialog bog gets displayed.
    2. After clicking 'OK' button in the page set-up dialog box, nothing happens.  It is suppose to bring print dialog.
    I simulated this in my development machine (confirmed that Print dialog is is not getting displayed when 'OK' button is clicked from 'Page setup' dialog)
    I researched and found out from some web page that if Business Objects XI is updated to Service pack 4, this issue gets resolved
    So i applied service pack 4 in my dev. machine and tested the functionality by clicking 'OK' button.  This issue is no more.
    Next logical step is to propagate the sp4 changes to the installer.  I searched for the merge modules corresponding to Business Objects XI - service pack 4.  I could not locate it now.
    I searched my backup folder,  I located some previously downloaded merge modules downloaded from  the web page, http://support.businessobjects.com/downloads/runtime.asp
    I tried to include these merge modules and received an error message "Internal build error" .  My research revealed that inclusion of the merge module,  CrystalReports11_RDC_Reportengine.msm  (43,306 Kb, 7/4/2007) throws "Internal build error"  during compilation of MSI project in Installshield 2009.
    Any idea, tips and help to resolve the issue would be appreciated.  Thank you.

Maybe you are looking for