Error in Message Alert /SCOT

Hi All,
I have configured the alert Message in the development and also in the Quality , In development it is working fine but in the Quality i am not able to get the mails in my inbox. Here are the few things that i have configured:
1. Created and Checked the user id in the SU01.
2. Checked the transaction SMICM, i found that there is the error but there is no description about where the error is.
3. Checked in the SCOT transaction-utility-services-SMTP.
4. When i am checking the SCOT transaction i am seeing that there are 7 errors under the error tab but it didn't say what is the error and where is it.
5. Checked ST22 dum analysis but there is no dump.
So Could anyone let me know if i need to check anything else to get the mails iin my external mail-id.
Thanks,
JAY

Yah i have the message in the SOST transaction,
here is the message : <b> No delivery to , as recipient unknown</b>
=======================================================
No delivery to , as recipient unknown
Message no. XS802
Diagnosis
The message from the node could not be delivered to recipient as
the recipient is unknown.
System response
Processing was ended normally.
Additional information of the node used (in the system language of the
node):
550 5.7.1 <[email protected]>... Relaying denied. I
Procedure
Check the recipient address, correct if necessary and send the message
to the correct address.
If the node is an R/3 System, the address is not contained in
address management or SAPoffice exception management. In this case, you
should maintain the address here.
If the node is not an R/3 System, you must maintain the address in the
appropriate system.
=======================================================
NOTE::::I have changed my company NAME to ABC
this only says that the address is not correct but i have checked this one several times but the address is exactly as i have provided in the development.
Please let me know if i need to do anything else.
Thanks,
JAy

Similar Messages

When i try to update my iPhone 3G software, the message alert showing (The iPhone ''iPhone'' could not be restored. An unknown error occurred). now my iPhone 3G blank display. how can i do then please?

when i try to update my iPhone 3G software, the message alert showing (The iPhone ''iPhone'' could not be restored. An unknown error occurred). now my iPhone 3G blank display. how can i do then please?

I was not sure about the ''jailbroken''. now my iPhone cannot use, on the showing (connect to iTunes logo). so if i just want my iPhone process in normal, what can i do? i mean i want it back to the previous software version?

Please help! I get the message ALERT: Error verifying class MyCnavas

Hello, I'm Trying to work on a gaming project in j2me. For which first of all, I'm trying to create a menu using the low level API. I tried the following program to see if my idea works. I tried to add in the menu items by calling g.drawString inside a for loop in the paint method. Then I've used the drawRect to draw a highlighting rectangle around the first menu item. It compiles and preverifies successfully, after which it gives me the error while running:
ALERT: Error verifying class MyCnavas
import javax.microedition.midlet.*;
import javax.microedition.lcdui.*;
class MyCanvas extends Canvas
     private static final int DOWN = -2;
     private static final int UP = -1;
     Graphics g;
     int itemposition = 0;
     public MyCanvas()
          super();
          repaint();
     public void paint(Graphics g)
          this.g = g;
          int pos=0;
          for ( int i =1; i<3;i++)
               pos = i*20;
               g.drawString("Option".concat(String.valueOf(i)), 20,pos, Graphics.TOP|Graphics.LEFT);
          g.drawRect(15,pos-5, getWidth()- 50, pos+5);
     public void keyPressed( int keycode)
          System.out.println(keycode);
          //if ( keycode == UP)
public class MyMIDlet extends MIDlet
     MyCanvas can;
     Display display;
     public MyMIDlet()
          can = new MyCanvas();
     public void startApp()
          display = Display.getDisplay(this);
          display.setCurrent(can);
     public void pauseApp()
     public void destroyApp( boolean unconditional)
}Any help on this issue will be greatly helpful
Regards
Rahul

No, I am using the default emulator provided by the sun midp 2.0 specification. I am executing the program on the command prompt. I am not using the wireless tollkit provided by sun.
I already tried removing those declarations of UP and DOWN, which are quite unnecessary I understand. and I tried removing the repaint call in the constructor. It still gives me the same problem.
I am not able to figure out what the problem could be. ANy help on this would be appreciated
Rahul

Error in the alert Log

Hi There,
Recently I started seeing these errors in the alert log for one of the databases:
Tue Aug 04 05:05:00 2009
Errors in file c:\oracle\product\10.2.0\admin\xxxxxx\bdump\xxxxxx_j000_6104.trc:
ORA-12012: error on auto execute of job 130961
ORA-27370: job slave failed to launch a job of type EXECUTABLE
ORA-27300: OS system dependent operation:accessing execution agent failed with status: 109
ORA-27301: OS failure message: The pipe has been ended.
ORA-27302: failure occurred at: sjsec 9
ORA-27303: additional information: The pipe has been ended.
So, I tried looking at the trace file associated with the error, and here is what I get:
$ cat ebcd01_j000_6104.trc
Dump file c:\oracle\product\10.2.0\admin\xxxxxx\bdump\xxxxxx_j000_6104.trc
Tue Aug 04 05:05:00 2009
ORACLE V10.2.0.3.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Oracle Database 10g Release 10.2.0.3.0 - Production
Windows Server 2003 Version V5.2 Service Pack 1
CPU : 4 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:1095M/4095M, Ph+PgF:7747M/12110M, VA:1367M/2047M
Instance name: ebcd01
Redo thread mounted by this instance: 1
Oracle process number: 53
Windows thread id: 6104, image: ORACLE.EXE (J000)
*** ACTION NAME:(DEL_ARCH_EBCP01) 2009-08-04 05:05:00.191
*** MODULE NAME:(DBMS_SCHEDULER) 2009-08-04 05:05:00.191
*** SERVICE NAME:(SYS$USERS) 2009-08-04 05:05:00.191
*** SESSION ID:(871.15642) 2009-08-04 05:05:00.191
*** 2009-08-04 05:05:00.191
ORA-12012: error on auto execute of job 130961
ORA-27370: job slave failed to launch a job of type EXECUTABLE
ORA-27300: OS system dependent operation:accessing execution agent failed with status: 109
ORA-27301: OS failure message: The pipe has been ended.
ORA-27302: failure occurred at: sjsec 9
ORA-27303: additional information: The pipe has been ended.
I'm not sure what job is causing this as there is no reference and also not sure how to resolve this issue!! How can I properly trace back these errors? Any ideas or tips to what should I do?
I'm running 10.2.0.3 database on windows 2003 server.
Thanks

I found the problem.. the executable job was referring to a none existing batch file..
I have refreshed the database from production some time ago and the jobs I have setup are referring to production scripts and paths (which we didnt have on dev)..
This is now resolved.
Thanks

Issue while creating Component Based Message Alerting in PI 7.31 Dual Stack

Hi,
We tried to implement Component Based Message Alerting following the steps mentioned in the below blog.
http://scn.sap.com/community/pi-and-soa-middleware/blog/2012/03/25/michals-pi-tips-component-based-message-alerting
Ours is PI 7.31 dual stack. However, after setting up the job with my own user id, I am getting the below error inside the log of Jobs tab:
javax.jms.JMSSecurityException: You do not have permissions: action alertingVP.queue and instance:name alertingVP.queue
action consumer
instance jms/queue/xi/monitoring/alert/ALERT-TO-MAIL
Please let us know what permission is required to set up the job.
Thanks,
Rahul

Hi,
Now I am able to receive alert in my mailbox. But it's coming with improper content.
I have set up the job at an interval of every 2 minutes in NWA, and in case if only 1 message fails in IE, in ideal case, I should receive only 1 message details in alert.
However, in every 2 minutes, I am receiving junk data and the number is increasing for the particular scenario for which the alert has been created. Also the Error Category mentioned is showing improper.
But in table SXMSALERTCONTENT I am able to view only the newly added failed entry.
An erroneous alert email content is pasted below:
63 messages failed for "Test_XXX" on "af.s0i.saps0i"
Root cause: -1
To navigate to the failed messages in the local message monitor use this link
The first 1 messages of that data collection:
"AdapterNamespace": "http://sap.com/xi/XI/System",
"AdapterType": "File",
"Channel": "FileSender_XXX",
"ChannelParty": "",
"ChannelService": "XXXXX",
"Component": "af.s0i.saps0i",
"ErrCat": "",
"ErrCode": "",
"ErrLabel": "-1",
"ErrText": "Configured source directory '\\Outbound\\XXX\\CREMAS' does not exist",
"FromParty": "",
"FromService": "XXX",
"Interface": "Z_CREMAS_SUSMM.CREMAS03",
"Namespace": "urn:sap-com:document:sap:idoc:messages",
"RuleId": "3a64dd6e1b1d3e58aff62ea70c97cb80",
"Timestamp": "2013-02-01T09:43:23Z",
"ToParty": "",
"ToService": ""
The failed message however do not relate to the 'source directory does not exist' issue. Please help.
Thanks,
Rahul

Each time I try to install iOS 7.1.1 on my iPad I get an error occurred message. Can anyone help

Each time I try to install update iOS 7.1.1 on my iPad I get an " error occurred " message. Can anyone give me advice on how to proceed ?

The exact wording of Error messages and Alerts are imperative in ascertaining your issue.
Mrsvgi wrote:
Each time I try to install update iOS 7.1.1 on my iPad I get an " error occurred " message. Can anyone give me advice on how to proceed ?
If you are having issues using OTA (over the air) to update...
Do the Update using iTunes on your Computer.
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download

I constantly get Error 7 (windows error 5) message. I have installed and uninstalled repeatedly. Any chance of getting Itunes on Windows 8.1?

I had the older version of ITunes and then it disappeared. When I try to install the new version, I keep getting "unable to install ITunes, Error 7 (windows error 5) message. I have repeatedly installed and uninstalled iTunes without luck. Any chance of actually getting this on Windows 8.1 or not? I am assuming I also lost my library during this.

Hey there Stardust37,
Welcome to Apple Support Communities.
The article linked below provides troubleshooting tips that can help you resolve the iTunes installation issue alert message that you’re seeing on your PC.
iTunes for Windows: "Error 7" message when opening iTunes - Apple Support
Cheers,
-Jason

Application ERROR - Fault message Error in Inbound ABAP Proxy !!

Hi Folks,
I have got application error while doing in Inbound proxy scenario. This inbound message is ProductActivityNotification, this message has got fault message. This message is triggering for faults. How to control this fault message or how to divert this error as an alert to RWB. Please give me your ideas step by step. Error as follows:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="ABAP">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="http://sap.com/xi/SAPGlobal20/Global">ProductActivityNotificationFault</SAP:ApplicationFaultMessage>
<SAP:Stack>Application has thrown an exception</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Please find the fault message has got following values
<?xml version="1.0" encoding="utf-8" ?>
- <n0:ProductActivityNotificationFault xmlns:n0="http://sap.com/xi/SAPGlobal20/Global" xmlns:prx="urn:sap.com:proxy:RAS:/1SAI/TAS653D9A9CCD9A8EF3AF9B:701:2009/02/10">
- <standard>
<faultText>Proxy Class (Generated)</faultText>
- <faultDetail>
<severity>information</severity>
<text>Start of inbound processing: ProductActivityNotification (ID )</text>
<id>000(/SCA/BIF_PROACT)</id>
</faultDetail>
- <faultDetail>
<severity>error</severity>
<text>Message ID is missing</text>
<id>032(/SCA/BIF_MI)</id>
</faultDetail>
</standard>
</n0:ProductActivityNotificationFault>
Will you please focus bit light on this error message please?
Regards
San

Hi,
Check your Source data is correct or not..beofr executing your scenario execute your inboud Proxy with valid data ,
check below blog...
/people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
Regards,
Raj

Mail on success or error in message processing

Hi experts
I need to configure a scenario
1. Receive idoc from an SAP system
2. Convert the Idoc into File and Place it in the NFS File directory.
3. On success of the message, I need to mail to SAP Owner regarding the success of the message.
4. On error as well , i need the error details to the SAP Owner.
I had configued all the basic steps in IR. I had struck with the BPM part.
Please suggest with the steps in the BPM.
Thnz

hi Mohamed,
For sending the mail on success or error in message processing you need to go to the runtime workbench and configure the scenario for mail alerts.
You need to create the alert rules for the success scenario and the failure scenario.
While creating the rules you can specify the message id's to which the mail should be sent.
Please refer to the below link for more clarification.
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
Kindly search SDN also as there are several threads in the forum answering the same question.
Regards,
Alpa.

How to exclude synchronous interfaces from component based message alerting

Hi Pi experts,
We are configuiring Alerts in PI 7.3 single stack.If we have 'n'number of interfaces, and if we configured general alerts for all.How to exclude synchronous interfaces in that.Alerting is for asynchronous interfaces only.How to do that.
Please advice on this.
Regards
Suneel

Hello,
>>What are your approaches regarding this requirement in the context of java-only?
I would suggest you to schedule jobs like this:
Customize Alerts Using Job in PI 7.31/PO
>> alerts are consumed according to the given interval and not in "real time" when error occurs, today solution using BADI is "real time" - if possible I would prefer "real time" solution
Check this:
Michal's PI tips: How to trigger an alert for Component Based Message Alerts (CBMA) via "API" ?
>>an separate service determine the actual alert count would be helpful to provide the correct value for maxAlerts, this have to be called beforehand
I haven't tried it but i think u can do that, since these consumers are nothing but JMS queues only so i think there will be a method to read number of alert counts.
>>In history I saw emails generated by the standard alert consumer which only contain details for the first alert, in my case I need details especially the message id for all errorneous messages
If ur max alert parameter is greater than 1 then u should see multiple alert text (along with message id and other details) in ur email message.
Thanks
Amit Srivastava

Java-only, Component based message alerting - loopback to sender system

Dear guys,
we are using the alert framework availbale on PI 7.11 to notify the sender system if there is an alert for specific interfaces. In that case a customer function module is called giving the message id of the request message (message is sent via ABAP proxy). As a result the according entry in customer table is updated.
The implemntation is based on the BADI ALERT_MODIFY_TEXT and uses the standard function module ALE_BAPI_GET_UNIQUE_RECEIVER to determine the system /rfc destination to send the alert notification.
This solution works fine so far.
As PI 7.11 dual stack is not the latest release, we are thinking of upgrading to current PI/PO release. In this context also shift to java-only installation is contemplated which will need an alternative solution for the described alert/error notification loopback.
Are there any possibilities analog to BADI to implement such a solution?
What are your approaches regarding this requirement in the context of java-only?
Any help/thoughts appreciated.
Best regards,
Jochen

Hello,
>>What are your approaches regarding this requirement in the context of java-only?
I would suggest you to schedule jobs like this:
Customize Alerts Using Job in PI 7.31/PO
>> alerts are consumed according to the given interval and not in "real time" when error occurs, today solution using BADI is "real time" - if possible I would prefer "real time" solution
Check this:
Michal's PI tips: How to trigger an alert for Component Based Message Alerts (CBMA) via "API" ?
>>an separate service determine the actual alert count would be helpful to provide the correct value for maxAlerts, this have to be called beforehand
I haven't tried it but i think u can do that, since these consumers are nothing but JMS queues only so i think there will be a method to read number of alert counts.
>>In history I saw emails generated by the standard alert consumer which only contain details for the first alert, in my case I need details especially the message id for all errorneous messages
If ur max alert parameter is greater than 1 then u should see multiple alert text (along with message id and other details) in ur email message.
Thanks
Amit Srivastava

Component based message alerting

Hi,
I am working on component bvased message alertig in SAP PI 7.4 (dual stack). As per the Michal's blog i have define everything in PI.-
http://scn.sap.com/community/pi-and-soa-middleware/blog/2012/03/25/michals-pi-tips-component-based-message-alerting
Also i have configured Configuration -> Infrastructure -> JAVA System Properties -> XPI Services: AF Core -> and choose tab Services .
Set the value of the alerting.target service property to 1.
and alerting.isActive (value true).
But still i am not getting mail in mail box.
When i check the log viwer i found two logs saying:
Job AlertConsumerJob (ID: 5fe771e0ec86100082e50000002ab43a, JMS ID: ID:1344010011108-000000008399) started on Thu, 5 Jun 2014 03:52:43:011 EDT by scheduler: c0000173a37f11e2b6ab00237d240438
Job AlertConsumerJob (ID: 5fe771e0ec86100082e50000002ab43a, JMS ID: ID:11344010011108-000000008399) ended on Thu, 5 Jun 2014 03:52:43:044 EDT
Could some body help me in this .
Thanks,
Anurag

Hi Anarug,
I am not sure whether it is solved.
From the log entry from the AlertConsumerJob, it seems that this job is running fine,
but it is not finding any alerts.
That means probably, no alert events are thrown by any rule.
So you should focus on that part first and see if you have any aggregated alerts in a job run.
I had some strange experience with Alert Rules that did not have all Message Statuses checked.
As soon as you uncheck any of the Message Statuses in the rule (for example any unusual adapter technology), the rule will not work.
This is a bug in my 7.31 system and I am just trying to fix it using SAP Note 1968989.
Please check if this Note might fit your situation.
Anyway, try to use a DEFAULT-RULE, which you can create in the ID by checking the box "create default rule" when defining a new alert rule.
Other things to check:
- are you using Integrated Configuration or generate at least errors in the Adapter Engine?
For errors in the (ABAP) Integration Engine, the whole story is similar but completely different.
Cheers, Jochen

Errors appeared in alert log file should send an email

Hi,
I have one requirement to do, as i am new dba, i dont know how to do this,
sendmail is configured on my unix machine, but dont know how to send the errors appeared in alert logfile should send an email to administrator.
daily, it has to check the errors in alert log file, if any errors occurs(ORA- errors or WARNING errors) should send an email to administrator.
please help me how to do it

Hi,
There are many methods for interrogating the alert log and sending e-mail. Here are my notes:
http://www.dba-oracle.com/t_alert_log_monitoring_errors.htm
- PL/SQL or Java with e-mail alert: http://www.dba-village.com/village/dvp_papers.PaperDetails?PaperIdA=2383
- Shell script - Database independent and on same level as alert log file and e-mail.
- OEM - Too inflexible for complex alert log analysis rules
- SQL against the alert log - You can define the alert log file as an external table and detect messages with SQL and then e-mail.
Because the alert log is a server side flat file and because e-mail is also at the OS-level, I like to use a server side scell script. It's also far more robust then OEM, especially when combining and evaluating multiple alert log events. Jon Emmons has great notes on this:
http://www.lifeaftercoffee.com/2007/12/04/when-to-use-shell-scripts/
If you are on Windows, see here:
http://www.dba-oracle.com/t_windows_alert_log_script.htm
For UNIX, Linux, Jon Emmons has a great alert log e-mail script.
Hope this helps . . . .
Donald K. Burleson
Oracle Press author

Excluding ORA-00060 errors from Generic Alert Log Error in OEM

Hi,
I want to remove the alerts for ORA-00060 errors from OEM Alerts. In "Generic Alert Log Error" the current expression for Warning is ORA-0*(600?|7445|4[0-9][0-9][0-9])[^0-9]. How should I change this expression so that it will not send alerts for ORA-00060. I am not much aware of perl :-). Please help me with the expression.
Target Type=dbname
Host=host
Metric=Generic Alert Log Error
Metric Value=ORA-00060: Deadlock detected. More info in
Time/Line Number=Mon Nov 2 10:02:54 2009/134883
Timestamp=Nov 2, 2009 10:17:14 AM EST
Severity=Warning
Message=ORA-error stack (00060) logged in /eb_rdo0_p/oraadmin/pnoltp/bdump/alert_.log.
Notification Rule Name=Database Alert
Notification Rule Owner=SYSMAN
Notification Count=1
Thanks,
Varma

this is default monitored objects.
To stop monitoring for this object, clear the Critical and Warning threshold values and click Continue.

PI 7.4 message alert to ECC backend.

Hello Experts,
I am busy with a project for IDOC2JDBC scenario.
In the best case scenario things are working fine, and i get the recors to the external SQL database.
My question is, if there is an error occured in the sql statement or other JDBC error, the communication channel should send an error message to the IDOC sender of the backend ECC.
I am following this tutorial ( http://scn.sap.com/community/pi-and-soa-middleware/blog/2012/03/25/michals-pi-tips-component-based-message-alerting).
How can i specify the backend as the receiver for the alert, or is there another way of doing this task?
Any suggestions would be appreciated.
Regards,
Antony.

Hi antony,
In this case, I think that the better way is to create a technical bpmn to send error back to the sender.
Pls refer to the link below:
Detecting Technical Errors in NetWeaver BPM

Error in Message Alert /SCOT

Similar Messages

Maybe you are looking for