Error in message Mapping(file to file scenario)

Hi friends,
In file to file scenario i am getting error like this while activating standard change list in IR.
Activation of the change list canceled Check result for Message Mapping MM_file2filejuly27 | URN:file2fileJuly27.com:
Starting compilation
Compilation complete
Check result for Software Component Version praba.com | PRABA.COM | 2007 | 0:
The standard error type ExchangeLogData is not defined for the namespace URN:file2fileJuly27.com
Save the software component version definition again. The object is then saved automatically
could you help me out how to correct this error?

Prabha,
You should not delete any existing standard Data types provided by SAP. ExchangeLogData and ExchangeDaultData are standard data types get created when you create new namespace.
If you have already deleted then copy them from other Namespace to your namespace. Activate your default data type first and then your objects.
Hope this will solve your problem.
Nilesh

Similar Messages

System Error During Message Mapping

I've set up a simple mapping scenario that sends a DEBMAS06 IDoc from our R/3 system to XI mapping to DEBMAS06 and writing out to a file. I am getting the following system error during message mapping:
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">JCO_SYSTEM_FAILURE</SAP:Code>
<SAP:P1>Server repository could not create function template for 'SMPP_CALL_JAVA_RUNTIME</SAP:P1>
I have gone back to the Design Builder and tested out the message mapping and the interface mapping and both work successfully. I have also taken the payload of the message and submitted it via the RWB and it generates the same error as when sent from R/3. Any other places I can look?

Hi Mike,
You have got the connectivity issue problem between ABAP and J2EE stack. When do the test in the Message Mapping, thats the J2EE and it works. But during the runtime it has to go to the Integratin Server, which is the ABAP stack. Fix the connectivity issue, check the smicm,trace and debug log etc.
Hope this helps.
Cheers,
Ranjan

Error: "Operation (Message) Mapping ... does not exist" during activation

Hello Colleagues,
I face following problem at our PI 7.1 System.
After import and activating Integration Builder (Directory) Objects I received the Error "Operation (Message) Mapping ... does not exist" but the object (s) exist at Enterprise Service Builder (Integration Repository) at respective Software Component Version.
The individual Product and respective Software Component Version was created at SLD and imported at Enterprise Service Builder (Integration Repository). Afterwards Namespaces with different objects was created incl. the missing Operation Mapping.
As Check:
When I try to import under menu Tools\Apply Model from ES Repository at Integration Builder (Integration Directory) i see onyl SAP (SAP BASIS 7.1) Software Components.
I am not able to find any object regarding the individual created Product\Software Component.
So, i asume objects from the Enterprise Service Builder (Integration Repository) aren't available at Integration Builder (Integration Directory).
SLD cache refresh and application restart already performed.
Any idea?
Many thanks in advance!
Regards,
Jochen

Hi Laxmi,
attached short steps that we performed.
In general in upfront:
This behavior happend after import objects from DEV to TEST for Enterprise Services Builder (IR) and Ingegration Builder (ID) in addition manual object creation at SLD for Technical Systems and Business Systems.
We don't have (currently) a central SLD for each environments DEV, TEST, PROD (not finished setup up to now). For each environments we have a local SLD at PI (XI).
Deployment steps:
- Product and respective Software Component Version created under Software Catalog
- objects creation at SLD for Technical Systems
- objects creation at SLD for Business Systems
- objects imported from DEV to TEST for Enterprise Services Builder (IR) incl. save and activation
- objects imported from DEV to TEST for Integration Builder (ID)
- manual configuration for communication channels performed
- after save and activation i received following error message: "Object Operation Mapping: ... does not exist.
Because of this error message I thing objects out of the Enterprise Services Builder (IR) aren't available at Integration Builder (ID) but i don't know the cause.
Could you help me to understand this behavior?
Many thanks in advance!
Regards,
Jochen

Error unknown message when saving ai file

Several days ago I got an external hard drive to backup. Had an error message saying all wasn't saved right. I use CS2 suite, all works fine except my illustrator files will not save as ai. They will save as jpeg, pdf, eps, but not ai. Error unknown message window popsup. Also 3/4 of my file names have turned from black to blue. I have reinstalled CS2 and this didn't fix the problem. What went wrong? How can this be fixed? I'm working on a book using Illustrator files alot.

PC - Windows, no fonts were installed. Only the ai files are affected. But nearly 3/4 of all file extension names have changed from black to blue. No big deal on that, but the ai saving is very upsetting.
Thanks,
Garry
What platform?
OS?
Computer Model!
Did you install any fonts?

TFS Build Error - Exception Message: The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters

I am trying to set-up CI of Orchard CMS and deploy it on Azure using TF service. I am stuck at following error for path being
longer than 260 characters. However, when counted the total characters in path are 235. Please see the below error :
Other Errors and Warnings
1 error(s), 1 warning(s)
Exception Message: TF400889: The following path contains more than the allowed 259 characters: drop/_PublishedWebsites/Orchard.Web_Package/Archive/Content/C_C/a/src/projects/Orchard/dev/DevAltaf/Orchard/src/Orchard.Web/obj/Debug/Package/PackageTmp/Modules/BrentApart.BannerManager/Scripts/controllers/bannerAssignmentController.js. Specify a shorter path. (type VssServiceException)
Exception Stack Trace: at Microsoft.TeamFoundation.Build.Workflow.Activities.FileContainerDropProvider.EndCopyDirectory(IAsyncResult result)
at Microsoft.TeamFoundation.Build.Workflow.Activities.CopyDirectory.EndExecute(AsyncCodeActivityContext context, IAsyncResult result)
at System.Activities.AsyncCodeActivity.CompleteAsyncCodeActivityData.CompleteAsyncCodeActivityWorkItem.Execute(ActivityExecutor executor, BookmarkManager bookmarkManager)
Inner Exception Details:
Exception Message: The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters. (type PathTooLongException)
Did anyone came across such issue while deploying Orchard on Azure with TF service? If yes, how did you sort this freaking error?
Thanks,
Altaf B.

Hi AltafB,
For your situation, you can short the path for the source code. Or use a short path for build agent folder in your build definition. You can refer to the links below to solve your problem:
http://blogs.msdn.com/b/aaronhallberg/archive/2007/06/20/team-build-and-260-character-paths.aspx
https://social.msdn.microsoft.com/Forums/vstudio/en-US/1638a5f0-9321-4ff9-9ee7-6d347badb972/please-some-solution-to-the-specified-path-file-name-or-both-are-too-long?forum=tfsbuild
Besides, since you deploy Orchard to Azure, you can also publish it directly using publish profile in Visual Stduio or WebMatrix directly.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

GUID FormatExceptionError in End to End Scenario at runtime, but no error in Message Mapping test

Hi Friends
My scenario is Idoc to RFC and , my mapping is working fine and executing successfully in the message map tab but , it is failing in the End to End case at runtime with GUIDFormatException error, can anyone please help on this , I have searched the forum and no proper or concrete answers are available , creating a separate or new channel is not an option.

Hi,
Check in which step you are receiving this error
1st check in SXMB_MONI/trace
2nd If the above is successful then check in rwb/comm channel monitoring/receiver rfc channel.
Regards
Venkat

Choosing 'Export', I confront 'Error 108' message. Exporting with file format mp4, etc doesnot work.

Choosing 'Export' in file menu, QuickTIme pro (v.7.7.4) , I confront 'Error 108' message with WIndows 7.
Namely
Error-108 : an unknown error occurred.
As a results Exporting with file format mp4, etc doesnot work. (windows 7. Quick time player v.7.7.4)
What are the reason? How do I operate this ?
Thank you.

boom! that advice was correct and worked. i was able to export the full project as a quicktime movie and it can be uploaded to youtube.
NOTE, theres is definately quite a few noticeable audio glitches/lags/pops that werent there before doing this. I believe, and will test to make sure, that having a project such as this one needs to render before exporting. I'm not sure if the advice requires the project to be unrendered before exporting for a specific reason, because if it will export fine after rendering the project that's the way to go. like i said the edited version i have in my timeline plays back perfectly but this exported version has quite a few noticeable audio glitches (a few video glitches too). I'm going to retry doing the first few steps of your advice, but then at the end render, then export and compare the results...
OK, so this leads to a big question, Is this something that is standard for everyone when trying to export? If its not, what causes this error?
is there any way of preemptively avoiding it in future projects?
thanks again, and hopefully this information will help others as exporting seem to be one of the biggest problems in fcpx. any word on a new patch or firmware update?

Runtime error in message mapping.

Hi experts.
My scenario is File --> PI --> File.
During the message mapping there are a few RFC lockups.
I have configured an communication component for the RFC destination, and a Receiver communication channel to the RFC system.
When I am trying to check the message mapping and the operation mapping from the integration builder every thing works just fine.
In the interface determination i have configured the rfc parameter for the mapping.
When I am trying to run the hole process i receive an error saying:"Runtime exception from: java.lang.nullPointerException:
null at com.sap.guid.GUID.parsHEXguid(guid.java:1015)
reguars Max

Hi.
As i have already said when I am trying to test the same operation mapping directly in the integration builder with the same message, it passes the mapping without any exceptions.
I think the catch may be in the fact that there are a few rfc calls inside the graphical mapping.
Any suggestions?
Regards Max.

Error in message mapping - Cannot produce target element

As one step in my integration process, I am builing a very simple file to BPM integration (inbound MI async, outbound MI abstract).
The source type and the target type are completely equal - I am only doing some modifications to some of the content.
The type for both messages - source & target message - is an imported external definition (DTD), and hence no DT or MT are created.
As a first step I am trying to fill the target message with the content from the source message (without any modifications to the content). However, when testing this in the message mapping area, I get an error message already when filling the first element, the 'root node'.
The error message is as follows:
Start of test
Compilation of <MM name> successful
Cannot produce target element <elementname>. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd Cannot produce target element <elementname>. . Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd
End of test
Any suggestions?
Thanks,
C

Thanks,
when creating the source message manually in the MM it worked - so nothing wrong with the mapping.
I saved this file and compared with the "original file" - containing the content which I wanted to upload, and on which the xsd (external definition) was based - and there where some inconsistancies.
I changed some values in the source XML which made it work, also when uploading the file from a drive.
So, I will go back to the source system and try to get a better XML.
Thanks for now!

Run time error during message mapping transformation

Hello,
i created a scenario and tried to execute . i got this error .
RuntimeException in Message-Mapping transformation: Runtime exception during processing target field mapping /ZCRM_CRMXIF_ORDER_SAVE_M01/IDOC/BEGIN. The message is: Exception:[java.lang.RuntimeException: Error: Occurred in RFC Look UpPlain exception:Problem when calling an adapter by using communication channel RFC_Lookup_Receiver (Party: , Service: Test_ReceiverSystem, Object ID: 1772b13e46b93b99bca48e278463007d) Check whether the communication channel exists in the Integration Directory; also check the cache notifications for the instance Integration Server (central Adapter-Engine) Channel object with Id Channel:1772b13e46b93b99bca48e278463007d not available in CPA Cache. com.sap.aii.mapping.lookup.LookupException: Problem when calling an adapter by using communication channel RFC_Lookup_Receiver (Party: , Service: Test_ReceiverSystem, Object ID: 1772b13e46b93b99bca48e278463007d) Check whether the communication channel exists in the Integration Directory; also check the cache notifications for the instance Integration Server (central Adapter-Engine) Channel object with Id Channel:1772b13e46b93b99bca48e278463007d not available in CPA Cache. at com.sap.aii.ibrun.server.lookup.AdapterProxyLocal.<init>(AdapterProxyLocal.java:61) at com.sap.aii.ibrun.server.lookup.SystemAccessorInternal.getProxy(SystemAccessorInternal.java:98) at com.sap.aii.ibrun.server.lookup.SystemAccessorInternal.<init>(SystemAccessorInternal.java:38) at com.sap.aii.ibrun.server.lookup.SystemAccessorHmiServer.getConnection(SystemAccessorHmiServer.java:270) at com.sap.aii.ibrun.server.lookup.SystemAccessorHmiServer.process(SystemAccessorHmiServer.java:70) at com.sap.aii.utilxi.hmis.server.HmisServiceImpl.invokeMethod(HmisServiceImpl.java:169) at com.sap.aii.utilxi.hmis.server.HmisServer.process(HmisServer.java:178) at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:296) at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:211) at com.sap.aii.utilxi.hmis.web.workers.HmisInternalClient.doWork(HmisInternalClient.java:70) at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doWork(HmisServletImpl.java:496) at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doPost(HmisServletImpl.java:634) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) ] in class com.sap.xi.tf._XiameterBasicRegistration_MM_ method crmRfcLookUp$[, , , , Test_ReceiverSystem, , com.sap.aii.mappingtool.tf3.rt.Context@26dd0a50]
can any one tel me wats going wrong ??

The error shows that you are using business system and comm. channel in UDF for doing some processing. The error is because it is not able to locate the specified comm channel for the business sytem.
please check if the comm. channel name and business system names are spelled correctly. Also you can try refreshing the CPA cache/ XI cache.

Error Activating Message Mapping

HI All,
I am getting the below error when i try to activate any message mapping in the IR. Any ideas?
" Starting compilation Source code has syntax error: java.lang.NoClassDefFoundError: com/sun/tools/javac/Main Exception in thread "main"
Thank you in Advance.
D

Hi,
Is there recently been an update like WAS ABAP and WAS JAVA to SPS13(nw2004s)?
Please check this thread there are some pointers in it:
Re: 500 internal server error
Best regards,
Guido

Activation error in message mapping

Hi,
while activating Message mapping i am getting the error like this.
how to get rid of this error?
error:
Activation of the change list canceled Check result for Message Mapping MM_XXXXXX | http://www.xyerxd.com/mm
Imported source message has invalid reference IDoc
DEBMAS.DEBMAS06 | urn:sap-com:document:sap:idoc:messages
Imported target message has invalid reference Message Type MT_Receiver | http://www.xyerxd.com/mm

hi
Hope you are using the inactive versions of message/Idoc types for mapping.
First activate the message/Idoc types used in the message mapping.
Then open the message mapping, from the menu choose refresh.
Complete the mapping and test.
Now do the activation.
rgds,
Arun

Error in message mapping

I used MT_PerformRate for both sender side and receiver side in message mapping
When I goto interface mapping and click on the mapping program it gives following error.
The source or target structure has been changed or could not be found in the Integration Repository. The mapping definition contains elements or attributes that do not exist in the changed structure. The relevant entries will be deleted
Target structure has no such path: /ns0:MT_PerformRate/@EmpName. Skipping mapping
Target structure has no such path: /ns0:MT_PerformRate/@EmpNo. Skipping mapping
Target structure has no such path: /ns0:MT_PerformRate/@PerformRating. Skipping mapping
Target structure has no such path: /ns0:MT_PerformRate/@RatingDesc. Skipping mapping
Target structure has no such path: /ns0:MT_PerformRate/@EffectiveDate. Skipping mapping
In mapping editor target fileds are shown in red.
I can see two message mappings in Change list one with target fileds in red and one with green.
I do not know what is happening
PLs suggest

Thanks Amith and Ameer for your answers.
The exact reason was because I did not used recordset in my datatype creation.
But I did not set ignoreRecordsetName to true
For who get similar problem please see below details and link
A <Recordset> element is inserted in the XML structure for each recordset structure. This level is not always required, particularly if the recordset only contains one structure definition.
If you set the parameter to true, the <Recordset> element is not inserted.
http://help.sap.com/saphelp_nw70/helpdata/EN/2c/181077dd7d6b4ea6a8029b20bf7e55/frameset.htm
Thanks,
Raj

Error in Message-Mapping transformation

I'm getting an error while processing the data from JDBC to SAP through IDOC's.
During the application mapping com/sap/xi/tf/_MM_HRMD_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: RuntimeException in Message-Mapping transformatio~
while testing the mapping in IR (message mapping) it got succesfull.
while testing the mapping in ID (Test configaration) with inbound payload we are getting the below error.
interface Mapping
... (173 lines)
Please provide the solution for this...

Hello,
Check out the trace thorougly in MONI as at which node/field the error is occuring.
W.r.t ID testing,kindly check your interface determination(sender,receiver parameters and also the inbound interface etc)
Regards
Madhu

Error in message mapping of IDoC Invoic02

Hi,
i have imported the invoic02 idoc into PI system. i have mapped the required field os idoc with standard XSD which is imported through ED. I'm able to most of the fields with idoc and XSD. however, some of the node in xsd are repaeting.
so here the part of xsd with which i'm mapping.
(first_node)ListOfTaxSummary                      0..1
(second_parent_node)TaxSummary                   1..unboubed
(child_node) tax                                 1..1
(element)TaxAmount                                0..1
(element)TaxCategoryCoded                         0..1
here the i have mapped ListOfTaxSummary    with the idoc node E1EDS01
TaxSummary with E1EDS01
tax with E1EDS01.
i tried all possibilities with different mapping. but i'm able to get the tax node under taxsummary with the element. the problem its been repeated as E1EDS01 idoc repeats.
please help us in solving this problem.
Thanks
Kind regards,
Lalitkumar.

Could someone tell me is there any relation for the above error in XML messages and to the message mapping?
The error mentions that you have used an IDOC in your mapping program which is not found in the ESR....you need to check if the IDOC is present in the ESR and is present under the correct SWCV.
Once you have done the check do some dummy change to the mapping and activate it (if in DEV) and then check the CACHE.

Error in message Mapping(file to file scenario)

Similar Messages

Maybe you are looking for